High-Performance Ceramics VII by Wei Pan - Bookswagon
close menu
Bookswagon
search
My Account
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > High-Performance Ceramics VII: (Volumes 512-515 Key Engineering Materials)
High-Performance Ceramics VII: (Volumes 512-515 Key Engineering Materials)

High-Performance Ceramics VII: (Volumes 512-515 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This special volume presents the latest advances in the science and technology of high-performance ceramics. More than 600, already-excellent, contributions were further refined, using a strict peer-review process, to yield the almost 400 manuscripts included in this collection. The result is an incomparable guide to the subject-matter of the title.

Table of Contents:
Preface Chapter 1: Novel Processing and Manufacturing Preparation and Characterization of High Purity β-SiC Powder Synthesis of Fiber-Like SiС by Carbothermal Reduction of Used Silica Bricks Microwave Synthesis of Nano SiC Doping Mg(B1-2x(SiC)x)2 Superconductor and Superconductivity Preparation of Both Reactive α-Si3N4 and SiC Mixed Powder in Flame-Isolation Nitridation Shuttle Kiln Synthesis of AlN Powder from Precipitation Precursor by Carbon Thermal Reduction in Flowing Nitrogen Single Phase Ti2AlC Powder Synthesized from Ti-Al-0.6~0.9TiC-0.1Sn Mixture Synthesis of Ti(C,N) Powder via CRN Method from Rutile/Carbon Mixtures Influence of the Dispersant on the Bead Milling of Alumina Synthesis and Surface Characterization of a Silica White Prepared from High Si:Al Fine Powder Extraordinary Adsorption Properties of Nano Porous Hydrophobic Silica Aerogels Preparation of Mullite Nanocomposites Powders by the Hydrothermal Crystallization Method from Coal Gangue Effects of Solvents on Synthesis and Dispersion of Zircon Powder via Non-Hydrolytic Sol-Gel Route Preparation of Rare-Earth Doped Zirconia Nanoparticles via Supercritical Hydrothermal Method for Luminescence Properties Fabrication of Graphene/Zirconia Nanocomposite by Mixing Graphite Oxide and Zirconia Nanopowders and Pressureless Sintering Study on Properties of Slurry for Making Zirconia Fiber Synthesis of Amorphous Al2O3-ZrO2 Powders Prepared by Citric Acid Gel Process Low Temperature Molten Salt Synthesis of Nano Crystalline MgAl2O4 Synthesis and Characterization of Magnetite Particles by Co-Precipitation Method Synthesis and Characterization of Spinel-Type NiCr2O4 Nanocrystalline Effect of MgO and NH4OH on Formation of 5Mg(OH)2·MgSO4·3H2O Whiskers Hydrothermal Synthesis of Yttrium Hydroxide Nanotubes Preparation and Thermodynamic Study of Self-Dispersal Nano-AIOOH Synthesis and Optical Properties of Single-Crystalline Silicon Nitride Nanowires with Controlled Dimensionality Preparation and Characterization of Calcium Silicate Slag Based Lightweight Wall Materials Preparation and Properties of Nano-Hydroxyapatite Derived from Sol-Gel Method for Cu2+ Polluted Water Reverse Microemulsion Synthesis of Hydroxyapatite Nanoparticles and Adsorption Performance Study Phase Behaviors of Talc Minerals in Carbothermal Reduction Process Cryomilling and Characterization of Metal/Ceramic Powders Synthesis of Cubic Ni Nanoparticles by Electric Current Heating Method Using Ni Wire Effects of Different Reducing Agents and Protective Agents on the Preparation of Nano-Silver Powder Synthesis and Characterization of Silver-Coated Copper Powder Layer Synthesis and Characterization of Nanocrystalline PZT Powders by a Simple Sol-Gel Method Effect of Dispersant Content on Nanograined BME MLCC Powder Prepared by Aqueous Chemical Coating Method Preparation of Ultra–Fine La3NbO7 Powder by Solid State Reaction Synthesis of Cobalt Sulfide Nanocrystallites via an Efficient Microwave Hydrothermal Process Solvothermal Growth of Cobalt Oxide Hexagon Nanodiscs Synthesis of n-Hexadecylphosphonic Acid-Coated Monodisperse Fe3O4 Superparamagnetic Nanoparticles Structure and Luminescence Characteristics of Terbium Hydroxide Nanosheets Doped with Eu3+ Luminescent Properties of MgLaLiSi2O7:Eu3+ Phosphors via Sol-Gel Process Preparation and Luminescence of ZnAl2O4:Mn Phosphors Preparation and Photo-Catalysis Properties of Fe3O4/TiO2 Nanocomposite TiO2 Whisker Prepared with Tataniferous Blast-Furnance Hydrothermal Synthesis and Characterization of LiZr2(PO4)3 Effect of Acticarbon on the Electrochemical Characteristics of LiFePO4 Battery Powder by Microwave Hydrothermal Effect of Cd2+ Concentration on the CdS Crystallites Prepared by Microwave Hydrothermal Process Synthesis of V2O5 Powders by EDTA Assistance Ultrasound Sol-Gel Process Synthesis of In2Se3/CuSe Composite Powder by Solvothermal Method Synthesis and Characterization the Intercalation Compound of SnS2-Ethylenediamine by Hydrothermal Reaction Synthesis and Characterization of SnS Flake-Like Microcrystals with a Microwave Hydrothermal Processing Influence of S⁄La Molar Ratio on the Morphology and Optical Property of La2S3 Microcrystalline Prepared by Microwave Hydrothermal Synthesis of LiV3O8 Crystallites via an Improved Citric Acid Assisted Sol-Gel Method Effect of pH Value on Preparation of La2CuO4 Microcrystallites Synthesized by Sol-Gel Process Phase Control of Nanosized NaYF4 Upconversion Particles Preparation and Property Characterization of Talc/Phthalocyanine Blue Composite Powder Preparing and Characterization of Hollow Ceramic Microspheres Ba–Ferrites Hollow Microspheres Prepared by Self–Reactive Flame Spraying Method Fabrication and Characterization of ZrO2 Hollow Spheres Preparation of Nanometer Carbon Spheres by Hydrothermal Synthesis Method Effect of Dispersant on the Measurement of Particle Size Distribution of Titanium Dioxide Controlled Synthesis of Hierarchical Flower-Like CuS Spheres by a Facile Microwave Hydrothermal Method Preparation of ZrO2 Micro Beads by Sol-Gel Method Synthesis of Carbon Nanotubes from Silicalite-1-Coated Substrates Preparation and Properties of Rigid Polyurethane Foams Reinforced by Sepiolite Minerals Nanofibers Preparation and Characterization of Coated Carbon Black Pigment Wet Foam Stabilized by Amphiphiles to Tailor the Microstructure of Porous Ceramics Preparation of M-AlN Suspensions for Aqueous Gelcasting Reaction Formed SiC Prepared by Room Temperature Freezing Casting The Preparation and Assessment of the Rigid Aerogel Insulation Composites Synthesis of Si-N-C Ceramic Composites by Pyrolysis of Polysilazane and Polycarbosilane High-Strength Porous YSZ Ceramics Fabricated by TBA-Based Gelcasting with High Solid Loading Slurry Preparation and Microstructures of Nano-Porous SiO2 Thermal Insulation Materials by Freeze-Casting of SiO2 in TBA/H2O Suspensions Making Nano-Porous SiO2 Insulation through Filter-Pressing of Foamed Slurry Preparation of Thin Cordierite Sheets by Aqueous Tape Casting Calculation of Tape Thickness for Ceramic Tape Casting Novel Zn-Doped SnO2 Hierarchical Architectures: Facile Synthesis, Structural Characterization and Enhanced Photocatalytic Property Alumina Ceramic Texturing Induced by High Magnetic Field and its Microstructure Microstructures and Properties of Solidified TiC-TiB2 Ceramic Composites with Increasing Cr Metallic Binder Prepared by Combustion Synthesis in High-Gravity Field Fabrication of Bulk Ceramics by High-Gravity Combustion Synthesis Fusion-Induced Diffusion Joints of Solidified TiC-TiB2 Ceramic with Stainless Steel and Ti-6Al-4V Alloy Achieved by Combustion Synthesis in High-Gravity Field Fabrication of Bi-2212 Films on Ag Substrate by Dip-Coating Method Structural and Optical Properties of TiO2 Nanoarray Films Prepared by Liquid Phase Deposition Influence of pH Value on the Phases, Morphologies and Optical Properties of Sm2S3 Thin Films Enhanced Performance of Alkaline Niobate-Based Ceramics Manufactured by Two-Step Sintering Effects of Sintering Process on the Properties of Ti3SiC2/Cu Composite Microwave Sintered Porous Mullite Composite Phase Transformation Temperature Adjustment of Calcium Chloride Hexahydrate Direct Write Assembly of 3-Dimensional Structures with Aqueous-Based Piezoelectric Inks Gel Casting of Large-Sized, Complex-Shaped RBSC Component Gelcasting of Fused Quartz Crucible with Large Scale Preparation and Mechanism of Interconnected Mesoporous Carbon Monoliths from Phenolic Resin/Ethylene Glycol Mixtures Superplastic Forming of Oxide Ceramic Composite The Effects of Different Slurry on the Joining Characteristics of SiC Green Body Microstructure and Mechanical Performances of C/C Composite and TC4 Alloy Brazed Joints Effect of Additive Silicon Powder on Physical Property of Cold Ramming Paste for Aluminum Electrolysis Chapter 2: Engineering Ceramics and Ceramic Composites Prediction of Critical Pressure in the Preparation of Composites by Vacuum - Pressure Infiltration Process Debinding Behaviors and Mechanism of Injection Molded ZrO2 Ceramics Using Kerosene as Solvents Aging Properties of Yttria-Stabilized Zirconia Ceramics The Influence of Y2O3 Calcined Temperature on the Performance of ZrO2 Zirconia Fiber Memberance Prepared by Electrospinning Bond Strength of Different Adhesive Luting Materials to Zirconia Ceramics Solid Particle Erosion Behavior of NiCr-Al2O3-ZrO2 (8Y) Ceramic Composites Mechanical Properties of ZrO2–LaMgAl11O19 Ceramics Fabrication and Optical Properties of Sm2Zr2O7-NiCr2O4 Modeling the Cracking Process of the YSZ Thermal Barrier Coating under the Thermal Shocking Loads Design, Preparation and Thermal Properties of (La0.4Sm0.5Yb0.1)2Zr2O7 Ceramic for Thermal Barrier Coatings Elastic Properties of Spark Plasma Sintered (SPS) ZrB2/SiC-Sm2Zr2O7 Composites The Gibbs Energy Description of Nd:YAG System A Simple Laminated Alumina Based Composite with High Work of Fracture CASTEP Calculation of Surface Energy of α-Al2O3 Anti-Bullet Property of Encapsulated AD95 Al2O3 Ceramic Effect of Different Composite Additives on Thermal Conductivity of Corundum Ceramics Formation and Evolution of Tribo-Layer on Al2O3 and Al2O3-Based Ceramics in Sliding against Si3N4 under Dry Sliding Corrosion Behavior of Al2O3 Ceramics in the Acid and Alkaline Solutions Hydrothermal Corrosion of Alumina Ceramics under Static and Quasi-Dynamic Conditions Influence of the Two Metal Dopant Improves the Specific Surface Area of Alumina in Catalyst Support Fabrication and Dielectric Properties of Fe-CNT/Al2O3 Bulk Composite Materials Research the Performance of Alumina Insulation Material by Freeze-Drying The Screening of Modifying Alumina Used in Automotive Catalyst Effect of Calcination Temperature on Phase Transformation and Microstructure of Al2O3/GdAlO3 Compound Powder Prepared by Co-Precipitation Method Fabrication and Properties of CaAl12O19-Al2O3 Composite Ceramics The Effects of Density on Thermal Conductivity of Al2O3 Fiber Composite Papers Dielectric Properties of Silica Fiber Reinforced Silica Composites Effect of Al3+ Additions on the Properties of Quartz Ceramics 3D Interconnetive Porous Silica Ceramics Prepared by Gel Casting with Egg White Protein as a Foaming Agent Disposing of Silica Fiber’ Surface Synthesis of Methacryloxypropyltrimethoxysilane Grafting Silica Cryogels Using Xylene as Solvent Synthesis of Plugged Mesoporous SBA-15-Type Silicas from Sodium Silicate Effect of Pyrophyllite on the Mullite Generation in Ternary Porcelain System Fabrication of Porous Mullite Ceramics with High Porosity Using Foam-Gelcasting Fabrication and Properties of Mullite Fiber-Reinforced Porous Mullite Ceramics Fabrication and Properties of Porous Anorthite⁄Mullite Ceramics Reinforcement of Porcelain by Mullite Fiber for Power Applications A Novel Way to Synthesis Magnesium Aluminate Spinel Powders by Polymer Gel Reaction Properties of Boehmite AlO(OH) Nanoparticles as the Coatings and Fillers Thermal Properties of Magnesium Hydroxide Using First-Principles Method Rare Earth and Perovskite Composite Ceramics Applied for the Thermistor with Wide Temperature Range Preparation and Properties of MgAl2O4-CaAl12O19 High Temperature Composite Hollow Multiphase Ceramic Microspheres of Al+Cr2O3+SiO2 System Prepared by Self-Reaction Quenching Technology Synthesis and Characterization of Double Pore Size Multiphase Materials from Waste Aluminum Slag and Activated Carbon Effect of Al2O3 Addition on Microstructure, Thermal Expansion and Mechanical Properties of Ta2O5 Ceramics High-Temperature Chemical Stability of Hf6Ta2O17 Ceramic for Thermal Barrier Coatings Microstructure and Properties of Laser Cladding Cu-TiB2 Composite Coating on Copper Ion Irradiation Effects on Ho2+xTi2-xO7-x/2 (x=0, 0.4 and 0.67) Study on Mineral Composition and Main Mineral Morphology of Bauxite from ZhongXiang, HuBei Province Mineral Compositions and Textures of Jadeite Orebody and its Country Rock in Nammaw, Myanmar Colorimetry Study on Red Tourmaline Color Genesis Preparation and Characterization of Activated Sericite Modified by Fluorosilicate and Acid Evaluation of Firing Temperature of the Bangsan Porcelain Synthesize Ti3SiC2 and Ti3SiC2-Diamond Composites at High Pressure and High Temperature Synthesize Ti3SiC2 from TiH2 by Pressureless Sintering Fabrication and Properties of Cf/Ti3SiC2-SiC Composites Using Ti3SiC2 as Inert Filler Microstructures, Properties and Fracture Behavior of Solidified TiC-TiB2 Composites with Increasing Content of TiB2 Crystal Growth, Fracture Behavior and Toughening of Rapidly-Solidified TiC-TiB2 Prepared by Combustion Synthesis in High-Gravity Field Theoretical Calculation of Crystal Cohesive Energy of (ZrTi)B2 Solid-Solutions Tailoring Plate-Like Grained ZrB2 Ceramic via a Strong Magnetic Field Alignment Method Followed by Spark Plasma Sintering Effect of BN Short Fiber Content on Mechanical Properties of ZrB2-SiC UHTCs Ablation Property of ZrB2-SiC Composite Sharp Leading Edges with Varying Radiuses of Curvature under Oxy-Acetylene Torch Fabrication of ZrC-SiC Powders by Means of Liquid Precursor Conversion Method Using ZrC Precursor and Polycarbosilane Preparation and Assessment of C/C-ZrB2-SiC Ultra-High Temperature Ceramics Effect of High-Energy Ball Milling of ZrB2 Powder on the Microstructure and Mechanical Properties of ZrB2-SiC Ceramics Study on ZrB2-SiC Prepared by Field Assisted Sintering Effect of Adding Phase on the Properties of ZrB2 Based Ultra-High-Temperature Ceramics Preparation and Properties of ZrB2-Cu Composites by Spark Plasma Sintering Electrical and Mechanical Properties of ZrB2-Based Composite Ceramic Investigation of Microstructure and Thermal Shock Resistance of the B4C/BN Composites Fabricated by Hot-Pressing Process A Multilayer Coating Method to Prepare Borosilicate Glass-Aluminum Composite Coating on Cubic Boron Nitride Particle Influence of the Content of B4C on Microstructure and Oxidation Resistance of Carbon/Carbon Composites Modified by a Sol-Gel/Solvothermal Process Effect of Carbon Fibers’ Surface Modification on the In Situ Growth of Carbon Nanotubes Influence of Adding β-SiС on the Performance of α-SiС Pressureless Sintering Ceramics Effect of Aging pH Value on the Properties of Porous SiC Ceramics Produced through Coat-Mix Process Improved Oxidation Resistance of SiС-Based Ceramic Matrix Composites by In Situ Reaction with Si3N4 Filler The Dispersion of SiC Nanopowders in Ethanol Preparation and Properties of SiC Nanocrystallite Reinforced Amorphous Si–B–C–N Ceramics Silicon Carbide Composites Deposited in Silicon Carbide Whiskers by CVI Process Effects of Carbon Fiber Dispersion on Bending Property of Cf/SiC Brake Materials Mechanical Properties of Short Carbon Fiber-Reinforced SiC-Matrix Composites and Correlation to Fibers Preparation of Cf/SiC Composites by Chemical Liquid-Vapor Deposition Process Design on Thermal Protection Structure of C/SiC Lattice Composite Materials Microstructures and Mechanical Properties of SiC-TiB2 Composite Prepared by Pressureless Sintering Fabrication of High Strength α-SiAlON/BN Composition Ceramics by Hot Pressing Porous Si3N4 Fabricated Using Benzoic Acid as Pore-Forming Agent Preparation of Silicon Nitride Porous Ceramics Preparation and Properties of Porous Si3N4/SiO2/BN Composite Ceramics Electric Conductive Si3N4/TiN Composite Ceramic Manufactured by Liquid-Qhase Sintering Dispersion of Si3N4 Powders in Tert-Butyl Alcohol Sintering Behavior and Properties of Si3N4 Ceramics with Yttrium Chloride Additive Porous Nitride Ceramic Composites with Low-Dielectric Properties Dielectric and Mechanical Properties of Porous Si3N4-BN Ceramic Composites Preparation & Characterization of h-BN Coatings on Ti-Based Substrate Synthesized via the PDCs Route: Tribological Applications in Severe Conditions First-Principles Investigation of Electronic Structural and Optical Properties of Rare Earth Doped β-Si3N4 Crystals High Performance Porous Wave-Transmitting Silicon Nitride Ceramics by Gel-Casting Technique Pressureless Sintering of Silicon Nitride Porous Ceramics with High Porosity and Bimodal Pore Structure The Influence of Sintering Temperature on Properties and Microstructure of TiN/Si3N4 Composite First Principles Investigation of Electronic Structure, Chemical Bonding, Elastic and Optical Properties of Novel Rhenium Nitrides Thermal Expansion of Anti-Perovskite Mn3Zn1-xSnxN Compounds Synthesis of Polyceriborosilazane via Substitution and Polymerization and Pyrolysis to SiBCN(Ce) Ceramics Fabrication and Properties of AlN/CNT Composite Ceramics High Frequency Dielectric Properties and Thermal Conductivity of AlN-BN Composites by Spark Plasma Sintering Fabrication and Properties of Al2O3-SiC/Sialon Composite Refractories Fabrication of the SiOC/HfO2 Ceramic Composites by the Sol-Gel Method Carbon Fiber Reinforced Phosphate Porous Ceramic Composites Study on Thermal Insulating Behavior of Silica Glass Fiber/Aluminum Phosphate Composite Ultrafine WC-Ni-SiCw Cemented Carbides Fabricated by Spark Plasma Sintering WC-Ni-SiCw Alloys Prepared by Hot-Pressed Sintering TiCN-Based Cermets Strengthened with SiC Nano-Whiskers by Spark Plasma Sintering Preparation and Properties of Polyalcohol Phase Change Material for Insulation Preparation of Calcium Hexaluminate Using Al2O3 and White Beach Sand from Western Australia Preparation and Characterization of Amorphous SiO2 Coating SiCp/Cu Composites The Effect of SiC Surface Treatment on the Interface Bonding Behavior of SiC/Cu Composite Particles Two Fracture Dynamics Problems of Fiber Reinforced Ceramics Evaluating Adhesion of Ceramic Coatings by Scratch Testing The Pyrolysis Processing of Polycarbosilane Studied by TG, XRF, IR, XRD, and XPS GIAXD and XPS Characterization of sp3C Doped SiC Superhard Nanocomposite Film Anisotropic Mechanical and Thermal Properties of Nd2SrAl2O7 Experimental Study and Numerical Simulation on Fatigue Crack Growth Behavior of GH4133B Superalloy Thermophysical and Mechanical Properties of Carbonated Hydroxyapatite Thermal Stability and Structure of Tellurite Glass Preparation of Light-Weight Forsterite Insulation Materials Through Extrusion Processing Preparation of Light-Weight Alumina-Spinel Refractory by Foaming Process Influence of Calcium Addition on the Chemical Durability of the Model Alumino-Silicate Glasses in Aqueous Solutions Transparent Oxyfluoride Glass-Ceramics Containing CaF2 Nano-Crystalline Phase Characteristics of CAS and Bi-Based Glass Frit as the Inorganic Binder of Alumina Insulation Slurry Preparation and Properties of Sintering Brick from Iron Tailings Preparation of Superhydrophobic SiO2 Coating on Stainless Steel Substrate Fabrication of Superhydrophobic Surface of TiO2 through Sol-Gel Process on Stainless Steel Substrate Structure and Growth Kinetics Features of Ceramic Coatings Produced on Ti-6Al-4V Alloy by Plasma Arc Oxidation Microstructural Evolution and Mechanical Properties of Vertical-Cracked Thermal Barrier Coatings in Thermal Exposure Effect of Anisotropic Conductive Properties on Heat Transfer and Temperature Distribution of Coatings and Substrates Modeling Dynamic Behaviors of Reticulated Ceramic/Metal Composites (RCMC) Thermal Cycling Behavior of Sm2Zr2O7 Ceramics Thermal Barrier Coatings by APS Preparation and Investigation of High Emissivity Coatings Prepared by Plasma Spraying Influences of Calcination Ambiences on Morphologies, Phase Composition and Contents of the Elements of Ceramic Coatings on Ti Alloy by Micro-Arc Oxidation ZrSiO4/SiC Oxidation Protective Coating for Carbon/Carbon Composites Prepared by Hydrothermal Electrophoretic Deposition Silica Coatings Pigmented with Core-Shell Particles for High-Temperature Radiation Heat Shields Influences of Argon Ambience on Phase Composition and High Temperature Oxidation Resistance Property of Ceramic Coatings on Ti Alloy by Micro-Arc Oxidation The Composition and Hardness of the Coating Containing Zirconia Produced by Micro-Arc Oxidation on Aluminium Alloy Fabrication of Superhydrophobic Coatings on Copper Substrate Kinetic Analysis of Sulfation of Fe-Ca Based Sorbent for FGD The Comprehensive Evaluation on Financial Performance of the Ceramic Company Based on Principal Component Analysis Chapter 3: Electrical, Magnetic and Optical Ceramics Microstructural Characterization of Diamond/SiC Composites Fabricated by RVI Hot-Pressed Sintered SiC-Based Composites for Microwave Absorbing Application Develop Dual-Mode DGS Bandpass Filters Using High Quality Factor Aluminum Oxide Ceramic Substrates Effects of Technique Parameters on Gelating Process of Cordierite Ceramics Derived from Sol-Microemulsion-Gel Method Effective Electro-Magnetic Parameters for Microwave Absorbing Ceramics Analysis of Absorption Properties for Magnetism-Absorbing Agents Mixed with Semiconductor Particulate Comparison Analysis of Absorption Properties for Microwave Absorbent Preparation of Nano BaTiO3-Based Dielectric Ceramics by Different Sintering Methods The Preparation of Flexible Substrate Using BaTiO3/Polymer Composites for Application in High Frequency Devices Effect of Bi2O3-B2O3-CuO Additives on Dielectric Properties and Energy Storage of BaTiO3 Ceramics Antimony Doping Effect on Barium Strontium Titanate Microwave Properties in BaO-TiO2 System Added by ZrO2 and WO3 Synthesis and Characterization of BaTiO3-(Bi0.5Na0.5)TiO3 Solid Solution Based Dielectric Ceramics On Preparation of SrTiO3 Thin Films with Self-Assembled Monolayers by Liquid Phase Deposition and its Dielectric Properties Effect of Annealing Treatments on the Physical Characteristics of (Ca0.8Sr0.2)TiO3 Thin Films by Sol-Gel Method Synthesis of Bismuth Titanate Thin Films by Liquid-Phase Self-Assembled Monolayers Synthesis and Characteristics of MgO Coated BST-Mg2TiO4 Composite Ceramics Influence of ZnO and Nb2O5 Additions on Sintering Behavior and Microwave Dielectric Properties of (Mg0.95Ca0.05 )TiO3 Ceramics Effect of P-Zn-La-Si-Al-N-Mg-Yb Oxides Additives on Sintering and Microwave Dielectric Behaviors of Nd(Co1/2Ti1/2)O3 Ceramics Application of AC Impedance Spectroscopy for Characterization of BiNbO4 Ceramics Preparation and Microwave Dielectric Properties of Ca(Sm0.5Nb0.5)O3 Ceramics Effect of Sintering Temperature on Structure and Dielectric Properties of BZN Ceramics SAW Properties on X,Y,Z-Cut of Sr3(Nb,Ta)Ga3Si2O14 and Ca3(Nb,Ta)Ga3Si2O14 Piezoelectric Crystal Fabrication and Study of BiNbO4 Ceramics Effect of Pre-Calcined Method on Dielectric, Ferroelectric, and Piezoelectric Properties of Lead-Free Piezoelectric Lix(K0.5Na0.5)1-x(Nb0.8Ta0.2)O3 Ceramics Effects of CuO Addition on the Microstructure and Microwave Dielectric Properties of MgTa2O6 Ceramics Studies on Structural, Microwave Dielectric Properties, and Low-Temperature Sintering of 1.52Li2O-0.36Nb2O5-1.34TiO2 Ceramic ZnTiO3 Doping Effect on Dielectric Properties of CCTO Ceramics via a Molten Salt Process Dielectric Properties and Photocatalytic Activity of Single Phase BFO Prepared by Chemical Coprecipitation Preparation and Dielectric Properties of Cr Doped Multiferroic BiFeO3 Properties of BiFeO3 Thin Films Prepared with Self-Assembled Monolayers by Liquid Phase Deposition Preparation of Nd and Co Co-Doped BiFeO3 Thin Films Co-Doping Nd and Co by Sol-Gel Method Density-Functional Studies of Cr Adsorbed on Polar ZnO Surfaces Study on Electronic Properties of ZnO Doped with Cr, Mn and Co by First Principles La Doped Layered Structure Low-Voltage ZnO Varistor Solid-State Reaction and Gas Sensor Properties of Porous SnO2-In2O3 Composites Donor Solid Solubility and Microstructure of Nb-Doped TiO2 Ceramic Varistor B2O3-Doped ZnO-Pr6O11 Based Varistor Ceramics Fabrication and Electrical Properties of Vanadium Pentoxide Fibres Failure Behavior of PZT 95/5 under Direct Current, Pulsed Electric Field and Shock Compression Synthesis and Electrical Properties of PZT/BaFe12O19 Multiferroic Ceramics Design of the PTO/PZO Ferroelectric Superlattice Assembly Effect of Glass Additive on Electrical Properties of PLZST Antiferroelectric Ceramics The Electrocaloric Effect in BaTiO3 Thick Film Multilayer Structure at High Electric Field Influence of Lanthanum Concentration on Properties of BLT Electroceramics Electrical Characteristics and Microstructures of Pr6O11-Doped Bi4Ti3O12 Ceramics Electrical and Physical Properties of the Bi3.25La0.75Ti3O12 Ferroelectric Thin Films Prepared by Conventional Temperature Annealing Process Ferroelectric and Physical Characteristic of the La and V Doped on Bi4Ti3O12 Thin Film Prepared by RF Magnetron Sputtering Method Ferroelectric Properties and Microstructures of Tb4O7-Doped Bi4Ti3O12 Thin Films Electrical Properties and Microstructures of Tb4O7-Doped Bi4Ti3O12 Ceramics Ferroelectric Properties of Bismuth Titanate Ceramics by Sm3+/V5+ Substitution Piezoceramic Stack Actuators for Micropositioning Stage Damping Properties of Epoxy-Embedded Piezoelectric Composites Microstructure and Electrical Properties of Porous PZT Ceramics with Unidirectional Pore Channel Structure Fabricated by Freeze-Casting Electrical and Physical Properties of Lead-Free (Na0.5K0.5)NbO3- Bi0.5(Na0.93K0.07)0.5TiO3 Ceramics Sol-Gel Derived Li2O Doped BNT-BKT-BT Ceramics: Microstructure and Piezoelectric Properties Preparation and Mechanical Energy Harvesting of BaTi0.9Zr0.1O3 Ceramic Nanofibers Phase Transitions, Dielectric and Piezoelectric Properties of BiScO3-PbTiO3 Ceramic Solid Solutions Enhanced Piezoelectric Properties of CaBi2Nb2O9 with Eu Modification and Templated Grain Growth Processing and Electrical Properties of Ta and Li-Modified KNN-Based Lead-Free Thin Films Prepared by the RF Sputtering Technology Impedance-Frequency Spectrum and Soft/Hard Doping Characteristics of Lead-Free K0.5Na0.5NbO3-LiSbO3-BiMnO3 Piezoelectric Ceramics Influence of Sintering Conditions on Electric Performance of Textured 92BNT-6BT-2KNN Ceramics Piezoelectric and Strain Properties of Strontium-Doped BZT-BCT Lead-Free Ceramics Enhanced Piezoelectric Properties of (Na0.535K0.485)0.905Li0.095(Nb0.94Ta0.06)O3 –(Na0.5Bi0.5)TiO3 Lead-Free Piezoelectric Ceramics in the MPB Composition Synthesis of Single-Crystalline Plate-Shaped K0.5Na0.5NbO3 Particles by Multi-Step Molten Salt Method Influence of Ta5+ Doping on the Piezoelectric Properties of KNN Ceramics Study on the Pressureless Sintering and Properties of (K0.5Na0.5)1-xLixNb1-yTayO3 Lead-Free Piezoelectric Ceramics Doping Effect of W6+ Ions on Microstructural and Magnetic Properties of Mn-Zn Ferrites Calcium Behaviors in MnZn Ferrite at Different Temperatures Effects of Eu3+ Substitution on Nanosized Mn-Zn Ferrite Powders Synthesized by Combustion Processing Molten Salt Synthesis of Ni0.5Zn0.5Fe2O4 Ferrites Effect of SiO2 Content on the Electromagnetic Properties of CoZn-Z Type Barium Ferrite Prepared with Ferrous Micro-Beads Fabrication of Iron Carbide and Nitride Ceramics with Controlled Magnetic Properties by the Non-Oxide Sol-Gel Process The Structure and Ferromagnetic Properties of the Single Phase Bi0.95Eu0.05Fe0.95Co0.05O3 Nanoparticles Prepared by Sol-Gel Room-Temperature Ferromagnetism in Co-Doped SrTiO3 Nanofibres Study on Magnetic Liquids Properties for Sensor Design Study on Magnetic Fluid Static Seal of Large Gap Structure Design of Magnetic Fluid Static Seal at Large Diameter Flange The Experimental Study of the Magnetic Fluid Damper Based on the Principle of Second-Order Buoyancy Experimental Study on the Second-Order Buoyancy of Magnetic Fluid Properties of Fluorinated Surfactant and Wetting Effect on Fe3O4 Nanoparticles Study on the Structure of the Magnetic Fluid Damper Effects of Magnetic Fluid on Magnetic Fluid Damper Photoluminescence of ZrO2-ZnO Hybrid Nanotube Arrays Produced by Electrodeposition Effects of Sm3+ Doping on the Photoluminescence Properties of Ca9Eu1-xSmx(VO4)7 Red-Emitting Phosphors Effects of PEG on Properties of SrAl2O4:Eu2+, Dy3+ Long Afterglow Phosphors Prepared by Combustion Synthesis The h-BN Protective Method Used for the Synthesis of Highly Uniform Spherical Si-Based Oxynitride Phosphors Zinc Oxide Films Doped with Aluminum, Gallium or Tin Prepared by Dip Coating Process Using Ethanol Solution The Synthesis of TiO2 Nanoarray Films on Glass Substrate by Anodic Oxidation Method Photoluminescence Enhancement of CdS Nanocrystals Fabricated on Dithiocarbamate Functionalized PET Substrates Luminescent Properties of Ce Doped LuAG Thin Films Prepared by Pechini Sol–Gel Method Preparation and Characteristic Development of Nano Zn2SiO4: Mn Green Phosphors by La2O3 Doping Relationship between Infrared Radiant Properties in Different Waveband and Structure of Fe–Co–Ni–Cr Spinels Relationship between Structure and Infrared Radiation of Fe–Mn–O Ceramics The Preparation of ZnO Nanopowders and Dye Sensitized Solar Cells By Sol-Gel Method Light Scattering Properties for PLZT Transparent Ceramics of Different Zr/Ti Ratios Recovery and Separation of Si and SiC in Wire Cutting Waste Slurry from Photovoltaic Silicon Fabrication of ZnO Nanospheres and Application to Dye-Sensitized Solar Cells Chapter 4: Ceramics for Electrochemical, Chemical and Energy Applications Properties of Yttria-Stabilized-Zirconia Based Ceramic Composite Abradable Coatings Preparation and Performance of Ni-YSZ/YSZ Co-Ceramic Using Multiple Gel-Tape Casting Fabrication and Properties of Ba(Zr0.63Ce0.27)Y0.1O3-δ/ZnO Electrolyte Materials Electrical Conductivity and Characterization of CeO2 Doped 8YSZ Electrolyte with 2%wt CuO Doping Fuel Processing in Direct Methanol and Carbon Deposition Behaviour on Ni/CeO2-ZnO Anodes for Solid Oxide Fuel Cell A Study on Electrical Resistivity of BaO–CaO–SiO2–Al2O3 Seal Glass Used in Solid Oxide Electrolytic Cell (SOEC) Application of Rape Pollen in Anode Substrates of Solid Oxide Fuel Cell Synthesis of Sr2Fe1-xMnxNbO6-δ Powders and their Stability as Electrode of Solid Oxide Electrolysis Cell Hydrothermal Synthesis of Li2MnSiO4 Powders as a Cathode Material for Lithium Ion Cells Mixtures of TiO2·0.2H2O and LiFePO4 as Li-ion Battery Cathode Materials Application of Electrochemical Impedance Spectroscopy in Organic Solar Cells with Vertically Aligned TiO2 Nanorod Arrays as Buffer Layer Magnetron Sputtering of Tantalum Oxide Thin Electrolyte Film for Electrochromic Applications Application of Three-Dimensional ZnO Inverse Photonic Crystal in Dye-Sensitized Solar Cells Photovoltaic Performance Optimization of Natural Trollius Sensitized Solar Cells Stability of Dye Sensitized Solar Cells with Glass Frit Sealant Effects of Surfactants on the Synthesis of Silica Aerogels Prepared by Ambient Pressure Drying Manufacturing Technology for Niobium Oxide Electrolytic Capacitor and Several Correlative Mechanisms An Energy Storage Material Fabricated by Coating Ba0.40Sr0.60TiO3 Nano Particles with Aluminum Oxide Doped with Zinc Oxide Shell Facile Synthesis of Hierarchically Macro/Mesoporous Carbons by Polymerization-Induced Phase Separation Combined with Starch Template The Thermoelectric Performance Enhancement of N-Type BiTeSe Alloys by Addition of ZnAlO The Influence of RuO2 Addition on the Thermoelectric Properties of BiSbTe Alloys Influence of Operational Parameters on Oil-Water Separation Efficiency of Titanium Oxide Modified Alpha-Alumina Microfiltration Membrane Facile Fabrication of Open-Ended High Aspect-Ratio Anodic TiO2 Nanotube Films and their Applications The Effect of Acid Etching Process on Surface Morphology and Electrocatalytic Capability of RuO2-IrO2-TiO2/Ti Anode The Effect of Sintering Temperature on Microstructure and Electrocatalytic Capability of RuO2-IrO2-TiO2/Ti Anode Synthesis of Nano-Sized SrTiO3 Photocatalyst by Sol-Gel Method Photocatalytic Enhancement in Methylene Blue Degradation of TiO2 Photocatalysts via Graphene Hybridization Influence of Microwave-Hydrothermal Temperature on Synthesis of TiO2 Thin Films on PMMA Substrates from Colloidal Anatase Aqueous Solutions Load TiO2 or TiO2-N on the Porous Carbon Pores Formation Mechanism of Undoped TiO2 Ceramics Fabrication of Oxide Compound Nano-Films Materials by LBL Self-Assembly Technology Super-Hydrophilic Lu3+-Doped TiO2 Photocatalysts for Self-Cleaning Applications Effect of Testing Conditions on ZnFe2O4 Film Photoelectrocatalytic Properties Enhanced Visible Light Activity of Ag-Loaded TiO2 Nanotube Arrays by AC Electrodeposition Preparation of Nano-ZnFe2O4 Doped TiO2 Photocatalytic Films on Porous Hayddites Fabrication of Li2TiO3 Ceramic Pebbles by Gelcasting Method ZrC Oxidization Mechanism in Air Chapter 5: Biomineralized Ceramics, Bioceramics and Bioinspired Designs Biomimic Enamel Remineralization by Hybridization Calcium- and Phosphate-Loaded Liposomes with Amelogenin-Inspired Peptide Preparation of Patterned BiFeO3 Thin Films on the Functional Silicon Substrates Surface Effects of Annealing Temperature on Morphology and Dielectric Property of BiFeO3 Films Preparation of Mineralized Electrospun PCL/Gelatin Scaffolds via Double Diffusion System Fabrication and Mechanical Properties of Chitosan-Montmorillonite Nano-Composite Matching Ability of Dental Shaded Zirconia Ceramics and Veneering Porcelain Influence of Low Temperature Aging on the Flexural Strength of Y-TZP Ceramics Affection of Post-Core Materials on the Resultant Color of Lithium Disilicate Ceramic Restorations Effect of Zirconia Surface Roughness on Shear Bond Strength to Resin Cements Effects of Alveolar Bone Loss and Post-Core Design on Stress Distribution of Severely Damaged Canine Relative Translucency of Dental Lithium Disilicate Ceramic Restorations Influence of Thickness on Residual Stress Profile in Veneering Ceramic Layered: Measurement by Hole-Drilling Masking Ability of IPS e.max ALL-Ceramics System of HO Series The Influence of Background Color to 3 All-Ceramic System Core Materials The Transmittance Test of 3 All-Ceramic System Core Materials Effects of the Mechanical Properties of Veneering Porcelain on Stress Distribution of Dental Zirconia Layered Structure: A Finite Element Model Study Preparation of Pigmented Glass for Infiltration and Investigation of its Physical and Mechanical Properties Colorimetric Comparison of Two Kinds of VITA Shade Guides Corrosion Behavior of Mesoporous Hydroxyapatite Coated AZ31 Magnesium Alloys Improving Bioactivity of Porous β-TCP Ceramics by Forming Bone-Like Apatite Layer on the Surfaces of Pore Walls Preparation, Characterization and In Vitro Release Kinetics of Vancomycin Carried β-TCP/Chitosan Composite Microspheres Used as Bone Tissue Engineering Scaffolds Influence of Surface Composition of Silicon-Based Material on their Bioactivity


Best Sellers


Product Details
  • ISBN-13: 9783037854259
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 2120
  • Spine Width: 106 mm
  • Width: 170 mm
  • ISBN-10: 3037854251
  • Publisher Date: 20 Jun 2012
  • Binding: Paperback
  • Language: English
  • Series Title: Volumes 512-515 Key Engineering Materials
  • Weight: 3700 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
High-Performance Ceramics VII: (Volumes 512-515 Key Engineering Materials)
Trans Tech Publications Ltd -
High-Performance Ceramics VII: (Volumes 512-515 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

High-Performance Ceramics VII: (Volumes 512-515 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!