Buy High-Performance Ceramics IX by Wei Pan at Bookstore UAE
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Mathematics and Science Textbooks > Physics > Applied physics > High-Performance Ceramics IX: (Volume 697 Key Engineering Materials)
High-Performance Ceramics IX: (Volume 697 Key Engineering Materials)

High-Performance Ceramics IX: (Volume 697 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This book comprises 178 papers presented in the Ninth International Conference on High-Performance Ceramics (CICC-9), which was held from November 4 to 7, 2013, in Guilin, China. It covered most aspects of field of high-performance ceramics (advanced ceramics), including processing, microstructures and properties of structural and functional ceramics. Some papers concerning the ceramics for next generation nuclear energy were included. Especially, in the papers given an overview of the most recent development in high-performance ceramics in China.

Table of Contents:
Chapter 1: Technologies of Processing and Manufacturing Synthesis and Characterization of MoO2 Nanoplates Prepared by Thermal Evaporation of MoO3 and S Powders Reaction Sintering of Transparent Aluminum Oxynitride (AlON) Ceramics Using MgO and Y2O3 as Co-Additives Effects of Seeding with Nanocrystallites and Addition of Inorganic Alumina Sol on Crystallization of Alkoxide Alumina Gel Preparation and Characteristics of Nanocrystalline Yttria by Microwave-Induced Solution Combustion Method Preparation of High-Purity Magnesium Aluminate Spinel Powder by Thermal Decomposition Method Preparation of Amorphous SiOC Ceramic Powders through Precursor Polymer Pyrolysis Preparation of Zirconium Diboride Nanopowders Using Different Zirconium Sources via Sol-Gel Method Preparation of ZrB2 Powders with Different Morphologies by Pressureless Reactions Preparation of Zirconium Diboride Powder by Carbon Thermal Reduction Method Synthesis of Ultra-Fine Zirconium Diboride Powders by Polymer Template Method Following by Microwave Sintering Preparation and Characterization of Ultra-Fine ZrB2 Powders from Inorganic-Organic Hybrid Precursors via Carbothermal Reduction Preparation of TiB2 Ultrafine Powders by Carbothermal Reduction Synthesis and Characterization of Asparagine-Modified and Terbium-Doped Spherical Hydroxyapatite Nanoparticle Preparation of β-CD-HAP Composite Microspheres Improvement of SrAl2O4:Eu2+, Dy3+ Phosphor via AlN Incorporation Microwave Assisted Preparation of YAG and Yb:YAG Transparent Ceramic Nanopowders for Laser Crystal Syntheses and Characterizations of New Eu-Ce Codoped LaSrSiO3N Phosphors for LEDs BiFeO3 Powders Synthesized by Different Sol-Gel Methods Preparation and Microstructure of (La0.5Sm0.5)2(Zr0.7Ce0.3)2O7Ceramics Prepared by Chemical Coprecipitation Method Magnetocaloric Properties of Perovskite-Type Manganite La0.65Sr0.2Na0.15MnO3 La-Doped Nanometer TiO2 Powders Prepared by Sol-Gel Method Preparation Uniform of TiO2 Microporous Ceramic Membrane Supported by Al2O3 Phase Evolution and Surface Morphology of Niobate Hydrate Template Nanoparticles Synthesized by Hydrothermal Method Hydrothermal Synthesis of Bi4Ti3O12/TiO2 Composite A Novel Method for Preparing Calcium Carbonate Particles: Thermal Decomposition from Calcium Hydrogen Carbonate Solution Study on the Pore Structure of Forsterite Insulating Material Control of the Spring Back in Rice Husk by Al2O3 Sol Cellulose-Silica Composite Aerogels Prepared with Sodium Silicate by Freeze Drying Method Pore Forming Mechanism of Forsterite Insulation Materials Synthesized by Molten Salt Method Study on the Gel Casting Process of Silicon Carbide Bacterial Cellulose Aerogels Skeleton Strengthened by Regenerated Cellulose Polysilane as SiC Precursor: Preparation, Catalytic Cure and Pyrolysis Zirconyldichloride Modified Polycarbosilazane as Precursors for SiZrCNO Ceramics Preparation of Camphene Carbon/Silicon Carbide Slurry for 3D Printing Preparation of Ti2AlN Porous Ceramics by Organic Foam Impregnation Process Fabrication and Properties of Porous Carbon Preforms for Making Reaction Formed SiC Densification Behaviors in the Early Stage of Spark Plasma Sintering of 3Y-TZP Nanoceramics Effect of Sintering Aids on the Properties of Porous YAG Ceramics Effects of Particle Size on Densification Behavior of Si3N4 Ceramics Effect of Sintering Pressure on Mechanical Properties of BN-Si3N4 Ceramic Composites Prepared by Spark Plasma Sintering The Influence of Al2O3 and TiO2 Additions on the Sintering Behavior of Partial Reaction Bonding Silicon Nitride Sintering of High Quality Titanium-Doped Zinc Oxide Ceramic Sputtering Target Influence of Hot Pressing Process on the Properties of Cf/SiO2 Composites Fabrication and Properties of W-SiCP/Cu Composites by Hot Pressing Sintering Effect of Buried Powder Sintering on the Electrical and Piezoelectric Properties of CuO-Modified (Li,K,Na)(Nb,Sb)O3 Lead-Free Piezoceramics Chapter 2: Ceramics for Functional Applications Preparation and Characterization of Bi2Ti2O7 Microwave Dielectric Ceramics by Citrate Sol-Gel Method Evidence of Normal to Anti Ferroelectric Phase Transition of PLZT Transparent Ceramics of Different Zr/Ti Ratio Using Ferroelectric Thin Film as the Dielectric for Electrowetting-on-Dielectric Dielectric Breakdown and Failure of Ferroelectric Films as the Dielectric for Electrowetting Systems The Electrical Properties of Epitaxial Grown Sc-Doped (Na0.85K0.15)0.5Bi0.5TiO3 Thin Film Prepared by Sol-Gel Method Influence of (Bi0.5M0.5)TiO3 (M=Li, Na, K, Rb) Addition on the Curie Temperature and PTC Effect of BaTiO3-Based Ceramics Effect of Defect Characteristics on the Color of BaTiO3-Based PTC Ceramic Electrode Interface Polarization in BaTiO3-Based PTC Ceramics Densification Behavior and Dielectric Properties of CaO-B2O3-SiO2 System Glass-Ceramics Containing ZrO2 Phase Evolution and Properties of Li2O-Al2O3-SiO2-Based Glass-Ceramic for LTCC Applications Influence of CeO2-Doping on the Electrical Properties of ZnO-Bi2O3-Based Varistor Ceramics Preparation and Resistivity of Zirconia Oxygen Sensor Probe Performance of (Y2O3,V2O5) Co-Doping TiO2 Ceramics V2O5-WO3/TiO2 Catalysts for Low Temperature NH3 SCR: Catalytic Activity and Characterization Influences of Preparation Parameters of Catalyst Support on the SCR Denitration Activity of Mn-Ce/TiO2 Photocatalytic Properties of WO3 Particles with Different Grain Sizes Effects of Eu and Ca Co-Substitution for the Improvement of Multiferroic Properties of BiFeO3 Preparation and Mechanical Properties of BiFeO3 Ceramics Hardness and Electromagnetic Properties of YSZ/NiZn Ferrite Composites SiO2-Coated Fe-Ni Alloy Core–Shell Structures Synthesized by a Facile Chemical Method Preparation and Magnetic Properties of Fe80Co20, Fe80Pt20 and Fe80Co20/Fe80Pt20 Bilayer Films The Role of Aluminium Source (Al2O3/AlN) in the Synthesis of the Ca-α-SiAlON:Eu2+ Phosphor Synthesis and Up-Conversion Luminescent Properties of Na(Y1.5Na0.5)F6 Hexagonal Prism Phase and Morphology Evolution of Manganese Oxides during Thermal Treatment Electrical Properties of Y0.06Sr0.94Ti0.6Fe0.4O3-δ-YSZ Composites as Electrode Materials Chapter 3: Ceramics for Structural Applications Preparation and Performance of Monazite Coating on Woven Alumina Ceramic Cloths Effect of Al Powder Content on Performance of MgO-Al2O3 Composite at 1700°C under N2 Atmosphere Effect of the Addition of Al Power on the Microstructure and Phase Constitution of Al2O3-MgO Composites Sintered at 1700°C under N2 Atmosphere Effect of the Addition of Al Powder on the Microstructure and Phase Constitution of Magnesia-Spinel Composites Sintered at 1800°C in N2 Preparation and Characterization of Al-Al2O3 Metal Ceramics via Powder Metallurgy Methods Microstructure and Mechanical Properties of Multiscale Zirconia Ceramics Prepared by Field Assisted Sintering Technique Preparation and Characterization of Mullite Fiber-Reinforced Al2O3-SiO2 Aerogel Composites Preparation of Small Size Ceria Stabilized Zirconia Microspheres by External Gelation: Effect of Vibration Frequency The Effect of Aging Temperature and pH Value of Aging Solution on the Microstructure of ZrO2-SiO2 Aerogels Preparation and Characterization of Al2O3/ZrO2 Composite Ceramics Thermal Insulation Property of Nanostructured Alumina Coated Zirconia Thermal Barrier Coating Effect of the Cooling Ways on the Properties and Microstructure of ZrO2/ZrW2O8 Ceramic Composites Influence of Temperature on the Order-Disorder Transition in Gd2Zr2O7 Synthesis and Characterization of LaMgAl11O19 as Thermal Barrier Coatings Material Effect of h-BN on Sintering Behavior, Microstructures and Mechanical Properties of YAG Bulk Composites Synthesis and Characterization of Magnesium Aluminate Spinel Porous Ceramics by Novel Molten Salt Method Preparation and Performance of Neutron Absorbing Dysprosium Oxide Ceramic Characterization of SiO2 Aerogel/SiO2 Fiber Composites Prepared by Sol-Gel Method Mechanically Strong and Hierarchical Porous Silica Ceramics via Gelcasting-Lyophilization Preparation and Properties of Acupuncture Quartz Fiber Reinforced Quartz-Based Composites Effect of Preparation Technology on Properties of Quartz Pore Gradient Materials Using Low-Grade Quartz Sand Preparation and Properties of Phenolic Resin Impregnated Quartz Fiber Tile Ablative Composite Performance of Nano-Silica Insulation Material Enhanced by High Humidity-Reinforcement Method Effects of Concentrations of NaCl on the Sintering and Thermal Conductivity of Forsterite The Effect of Particle Size of Expandable Graphite on the Properties of an Expandable Thermal Insulation Material Effect of Moisture Absorption on High Temperature Thermal Insulation Performance of Fiber Insulation Materials Optimized Design of Multilayer Thermal Insulations for Hypersonic Vehicles Effect of Binders on Preparation of High Temperature Rigid Thermal Insulation Materials Influence of Sintering Aids on the Sintering and Conductivity Properties of Si3N4 Composites Preparation and Properties of Si3N4-SiC Radar Wave-Absorbing Nanocomposites Preparation of Sialon/Si3N4-SiC Composite Refractories Using Kyanite Tailings Study on the Cause and Control of Defects on Process of CVD SiC Fabrication of Mullite Coating and its Oxidation Protection for Carbon Fiber Reinforced SiC Composites Wetting and Interfacial Behavior of Molten Al on Mo-Ni(Co)-Si Coated SiC Ceramic Effect of Additives on Bond Property for Phenolic Resin-Based Adhesive Preparation and Properties of SiC/Si-B-C-N Ceramic Composites Preparation of B4C-ZrB2 Laminated Composites by Non-Aqueous Tape Casting and Hot-Press Sintering Structural-Functional Integrative Mullitef/SiBN Composites with Excellent Wave-Transparent and Mechanical Properties Effects of Viscosity and Pressure on Microstructure and Properties of Cf/SiC-ZrB2 Composites by PIP Process Microstructure and Mechanical Properties of ZrB2/h-BN Multiphase Ceramics by Low-Temperature Reactive Sintering Microstructures and Mechanical Properties of β-Sialon-cBN Composites High Pressure and High Temperature Sintered PcBN Using Al, B4C and C as Sintering Additive Influence of SiC on the Properties of PcBN Cutting Tools Fabricated by High Pressure and High Temperature Sintering Effect of Al and Si Additions on the Synthesis of Spark Plasma Sintered Zr2Al4C5 Creamic Microstructure and Ablation Property of TaC-SiC Composite Coatings Preparation and Properties of TiB2-SiC-Si Composites Fabricated by Reaction Bonding Preparation and Properties of High-Purity Porous Calcium Hexaluminate Material Gel Casting and Properties of SiCp/Al Composite Wetting and Interfacial Behaviors of Molten Ag, Cu and Ag-28Cu on WC-8Co Cemented Carbide Preparation of Glass-Ceramics by Reactive Crystallization with Waste Glass and Mullite Phase Equilibria in the BaO-SiO2-Al2O3 Ternary System at 1500 °C Nitridation Isothermal Kinetics of In Situ β-Sialon Bonded Al2O3-C Refractories Effects of Al Content on the Phase Constitution of Aluminum-Periclase Composites at 1600°C in N2 Effect of Spinel Content on the Reaction of Porous Periclase-Spinel Ceramics and Cement Clinker Influence of Contents of Pre-Synthesized Spinel on the Microstructures and Mechanical Properties of the Lightweight Corundum-Spinel Refractory Castables Effect of Sintering Temperature on the Physical Properties and Microstructure of In Situ Nitrides Bonded MgAl2O4-C Refractories Effect of Particle Size Distribution of Raw Materials on Properties of Magnesia-Alumina Refractory Preparation and Properties of Lightweight, High-Strength Insulation Materials Using Fly Ash Floating Beads Effect of Zircon Content on the Microstructure and Physical Properties of Chamotte Refractories Effects of Short PAN Fiber Contents on Mechanical Properties of Metakaolin-Blast Furnace Slag Based Geopolymers Influence of Voltage on the Biological Performance of Micro-Arc Oxide Films Based on TC4 Titanium Alloy Influence of Voltage on Microstructure of Micro-Arc Oxide Films on TC4 Titanium Alloy Effect of Thermal Oxidation Temperature on the Properties of Micro-Arc Oxidation Ceramic Coating on TC4 Alloy Chapter 4: Mechanical Properties of Ceramic Materials The Effect of Thickness on the Fracture Strength and Failure Modes of Zirconia Crowns Effects of Sintering Temperature and Excess Zr on Mechanical Properties of Reactive Hot-Pressed ZrB2-ZrCx-Zr Cermets Mechanical Properties and Microstructure of 2.5D Cf/ZrO2 Composites Prepared by Precursor Infiltration and Pyrolysis Effects of Si3N4 Additions on Creep Resistance of Al-Al2O3 Composites Mechanical Properties of Polymer-Infiltrated-Feldspar for Restorative Composite CAD/CAM Blocks Analysis on Low Cycle Fatigue Life and Fatigue Fracture Surface Morphology of TC25 Titanium Alloy Analysis on High Cycle Fatigue Properties and Fatigue Damage Evolution of TC25 Titanium Alloy Research on Transition from Short to Long Fatigue Crack Propagation of GH4133B Superalloy Used in Turbine Disk of Aero-Engine Thermal Property of Cu/Ti3SiC2 FGM ZrO2 Ceramic CompositeAdded with MgAl2O4: Thermal Shock Resistance and Corrosion Resistance in Molten Uranium The Oxidation Resistance of ZrB2-SiC Composites Fabricated by High Pressure and High Temperature Sintering Ablation Behavior of Low Pressure Plasma Sprayed TiB2-MoSi2 Composite Coatings Chapter 5: Emerging Inorganic Non-Metallic Materials Synthesis of Carbon Nanotubes from Phenolic Resin Using Nickel Nitrate as a Catalyst Precursor Effects of Solvent on the Optical Nonlinearities of Multi-Walled Carbon Nanotubes under the Picosecond Laser Pulses Preparation and Characterization of ZrO2 Nanofibers and Nanobelts by Electrospinning Preparation and Characterization of Vanadium Pentoxide Hollow Microspheres with Tunable Sizes Synthesis of V6O13 Flowers-Like with Control pH for Li-Ion Battery Cathodes Synthesis and Antibacterial Activities of Ag/ZnO Nanoparticles Effects of Annealing Temperature and Coating Layers on Properties of ZnO Thin Films Prepared by Sol-Gel Immerse Technique Composition, Structure and Electrical Resistivity of ZnO1-x Films Deposited by RF Magnetron Sputtering under Various O2/Ar Gas Ratios A Single-Phase Full-Color Ca4Si2O7F2:Ce3+, Tb3+, Sm3+ Micron Belt Mat for White-Light Emitting Diode Application Liquid Phase Deposited TiO2 Films on Stainless Steel Mesh for Corrosion Resistance Application A Metastable Ion (III) Oxide Phase (ε-Fe2O3): Preparation and Gas Sensing Properties Influence of Addition of Fe2O3 and CaO on the Performance of Manual SHS Welding Slag Photocatalytic Behaviors Observed in Microstructured PbS under Visible Light Immobilization of Laccase in Glycidoxypropyl-Functionalized Magnetic Mesoporous SiO2/Fe3O4 Hollow Microspheres Control of Preferential Orientation of La1-xSrxMnO3 Thin Films by Pulsed Laser Deposition Study on Zeolite X Complexing Dimethyl Potassium Research Progress of Adsorption on Heavy Metals from Aqueous Solutions by Modified Diatomite Formation Mechanisms of the Point Defects from the 4H-SiC (0001) Surface to the Interior Layers: First Principle Calculation Effect of Bias Voltage on Microstructure and Mechanical Properties of CrN Coatings Prepared by Single Target Magnetron Sputtering Dual-Functional Phase Change Nanocapsules Based on n-Octadecane Core and Polypyrrole Shell Influence of Pre-Oxidation on the Morphology of Mesocarbon Microbeads Coalescence of the Fullerenes in SWNT with Bend Junction Chapter 6: Ceramics for Next Generation Nuclear Power Principle Design of Graphite Components for HTTR and R&D on Nuclear Graphite for HTGR in JAEA Sintering of SiC Coating Layer on Graphite Spheres Prepared by Pack Cementation Preparation of Li4SiO4 Ceramic Pebbles by Agar Method Using Li2SiO3 and Li2CO3 as Raw Materials Preparation and Characterization of Lithium Orthosilicate Ceramic Pebbles by Melt Spraying Method Characterization of the Tracer YSZ/CoO Microspheres with YSZ Ceramic Coating for HTR Fuel Element Processing and Thermal Properties of Multiwall Carbon Nanotube/Bismuth Antimony Telluride Composites for Nuclear Energy Applications Preparation of UCO Microspheres by Internal Gelation Process Preparation and Performance of Fully Ceramic Fuel Element Using Silicon Carbide as Coating Layers Preparation of Silicon Carbide Nanowires and Nanochains Using Chemical Vapor Deposition Method Preparation of Silicon Carbide Coating Layer by Fluidized Bed Chemical Vapor Deposition Using a Halogen-Free Precursor Effect of PyC Thermal Behavior on the Stress of TRISO-Coated Fuel Particles


Best Sellers


Product Details
  • ISBN-13: 9783035710656
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 894
  • Spine Width: 45 mm
  • Width: 170 mm
  • ISBN-10: 3035710651
  • Publisher Date: 11 Aug 2016
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 697 Key Engineering Materials
  • Weight: 1630 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
High-Performance Ceramics IX: (Volume 697 Key Engineering Materials)
Trans Tech Publications Ltd -
High-Performance Ceramics IX: (Volume 697 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

High-Performance Ceramics IX: (Volume 697 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!