High-Performance Ceramics V
Home > Science, Technology & Agriculture > Industrial chemistry and manufacturing technologies > Industrial chemistry and chemical engineering > Ceramic and glass technology > High-Performance Ceramics V: (Volumes 368-372 Key Engineering Materials)
High-Performance Ceramics V: (Volumes 368-372 Key Engineering Materials)

High-Performance Ceramics V: (Volumes 368-372 Key Engineering Materials)

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). This special volume presents, discusses and reviews the latest advances in the science and technology of high-performance ceramics. The editors received more than 700 contributions from which, following a strict peer-review process, more than 598 manuscripts were chosen for inclusion in this collection.

Table of Contents:
Sponsors Preface Luminescence Sensing of Temperature in Oxides Investigation on the Effects of Zn on PbTiO3 Preparation and Characterization of (1-x)BiScO3-xPbTiO3 Ceramics by Two-Step Sintering Influence of Varying the Powder Loading Content on the Homogeneity and Properties of Extruded PZT-Fibers Effect of PbO Concentration on the Templated Grain Growth of PMN-32.5PT Ceramics Pulsed Power Supply of Ferroelectric Ceramics by Shock-Induced Depoling Electrical Behavior of PSZT Ferroelectric Ceramic under Shock Wave Compression Preparation and Characterization of Relaxor-Based Ferroelectric Thick Films with Single Perovskite Structure Fabrication of Spark Plasma Sintering on Pb(Mg1/3Nb2/3)O3–PbTiO3 Ceramics Layers Prepared by Tape Casting and TGG Method Preparation and Characterization of Perovskite Pb(Mg1/3Nb2/3)O3-PbTiO3 by a Modified Polymerized Complex Process Characterization of the Bismuth-Based Piezoelectric Ceramic System (1-x)Bi(Mg1/2Zr1/2)O3-xPbTiO3 Preparation of Mg and Ti Co-Doped NiO-Based Ceramic and its High Dielectric Properties Liquid Phase Sintering of Barium Titanate Ceramics for High Energy Density Capacitors Effects of Processing on Microstructure and Dielectric Properties of Ultrafine- Grained Barium Titanate Based Ceramics for BME-MLCC Applications Synthesis, Characterization and Electrical Properties of Barium Titanate Films Fabricated by Hydrothermal Method Preparation of Barium Strontium Titanate Nanopowders by a Sol-Gel Hydrothermal Synthesis Method Low Temperature Hydrothermal Synthesis and Sintering of Ba0.6Sr0.4TiO3 Effect of Annealing Temperature on the Microstructure of Barium Strontium Titanate Films Microstructure and Dielectric Properties of Ba0.5Sr0.5TiO3 Ceramics by Spark Plasma Sintering Dielectric Behavior of (1-X)BaTiO3-XCaCu2.94Mn0.06Ti4O12 Composite Ceramics Influence of Excess Bi2O3 on the Characteristics of (Na0.5Bi0.5)TiO3-BaTiO3 Ceramics Effects of Mn-Doping on the Piezoelectric and Ferroelectric Properties of (Na0.8K0.2)0.5Bi0.5TiO3 Ceramics Effects of Mn Doping on Dielectric Properties of BSTN Ceramics Electrical and Physical Characteristics of Ba(Zr0.1Ti0.9)O3 Thin Films under Oxygen Plasma Treatment for Nonvolatile Memory Devices Application Nano-Precipitation in SrTiO3-Based Functional Ceramics Electrical Characterization and Microstructures of Tb-Doped Bi4Ti3O12 Thin Films Cation Distribution and Structural Instability in Pr-Doped Bi4Ti3O12 Electrical Characteristics and Microstructures of (Gd, Dy)-Doped Bi4Ti3O12 Ceramics Electrical Characteristics and Microstructures of Ce-Doped Bi4Ti3O12 Films Effect of Tb Substitution on Electrical Characteristics and Microstructures of Bismuth Titanate Ceramics Preparation and Dielectric Properties of the Layered Perovskite Sr4Bi4Ti7O24 Ferroelectric Ceramics Ferroelectric Properties of Sol-Gel Derived Ca1-xSrxBi4Ti4O15 Thin Films Synthesis of Nanocrystalline 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 Powder by a Citrate Method Processing and Properties of Ferroelectric Bi4-x La xTi3O12 Ceramics Bi4-xLaxTi3O12 Ferroelectric Thin Films Prepared by RF Magnetron Sputtering Preparation and Magnetic Property of Bi2Fe4O9 Nanoparticles by Hydrothermal Method Molten Salt Synthesis of CaCu3Ti4O12 Effects of the Replacement of Ti by Zr on the Dielectric Properties of CaCu3Ti4012 Ceramics Effects of CuO on the Preparation, Microstructure and Dielectric Response of CaCu3Ti4O12 Preparation and Characterization of CaCu3Ti4O12 Ceramics by Cold Isostatic Press Forming Preparation and Properties of CaCu3Ti4O12 Thick Film by Aerosol Deposition Method Dielectric Properties of Zr-Doped CaCu3Ti4O12 Ceramics Low-Temperature Sintering of Ba5(Nb1-xVx)4O15 Ceramics with H3BO3 The Characteristics of Ferroelectric Sr0.4Ba0.6Nb2-xVxO6 Dielectrics Preparation and Morphological Controlling of Nanophase NaNbO3 by Sol-Gel Method Difference in Ordering Ability Between Ca(Al1/2Nb1/2)O3 and Ca(Fe1/2Nb1/2)O3 Synthesis of (1–x) CaTiO3–xNdAlO3 Ceramic Powder via Ethylenediaminetetraacetic Acid Precursor DC and AC Electrical Properties of Sr2-xLixFeMnO6 Compound Microwave Dielectric Ceramics and Devices for Wireless Technologies Tailoring of the Dielectric Properties of Some Low Sintering Temperature Ceramics Sintering and Microwave Dielectric Characteristics of ZnTa2-xxNbxO6 Ceramics Preparation and Characterization of Citrate Sol-Gel Derived CaLa4Ti4O15 Microwave Dielectric Ceramics Low Temperature Sintering Ba3Ti5Nb6O28 Ceramics with Tunable Temperature Coefficient of Dielectric Constant Preparation and Dielectric Properties of BaO-Sm2O3-4TiO2 Microwave Ceramics with B2O3 and CuO Addition Sintered in Low Temperature Low Temperature Sinter-Ability of Microwave Dielectric Ceramics 0.4(Ca0.61Nd0.26)TiO3-0.6(Li0.5Sm0.5)TiO3 Low Temperature Sintering and Microwave Dielectric Properties of Zinc Titanate Ceramics for LTCC Applications Change of Microwave Dielectric Loss during the Solid-Reaction Synthesis of SrFeCo0.5Oy Structure and Microwave Properties of NaxCa1-xAl2-xSi2+xO8 (0 < x < 0.67) Plagioclase Feldspar Microwave Characteristics of ZnO-Doped CeO2 Dielectric Resonators Synthesis of Cordierite Powders by Low Temperature Combustion Method Automatic Multimode Measurement for Microwave Ceramics Accurate FEM/BEM Simulation of Wireless Passive Surface Acoustic Wave Sensors A Micro Piezoelectric Motor with a Disk-Pivot Structure Ultrasonic Linear Motor with a High Stiffness Support Mechanism for Precision Control A Novel Piezoelectric Micro-Motor Using Multilayer Co-Firing Piezoelectric Ceramics A Considering Method of Density Distribution Factor for the Ceramic Motor with Soft Magnetic Composite Core A Piezoelectric Micropump Based on MEMS Fabrication Finite Element Analysis and Design of Monolithic Multilayer Piezoelectric Micromanipulator A Novel Piezoelectric Nebulizer Fabrication of Piezoelectric Cantilever Beam Based on Nanostructured PZT Film Magnitude Versus Frequency Performance of Vibration Acceleration Sensor Based on Cymbal Transducer Effects of the Top-Electrode Annealing on the Ferroelectric Properties of BiFeO3 Thin Films Electrical Characteristics of Fluorine Passivated MOCVD-TiO2 Film on (NH4)2Sx Treated GaAs Interfacial Behavior of SiC-Based Boundary Layer Capacitors Microwave Sintering of YSZ Electrolyte Materials for SOFC Properties of YSZ Electrolyte Sintered at 1250°C Fabrication and Conductivities of CeO2-Based Oxygen-Ion Conductors Doped by M2O3 (M=La, Nd, Sm and/or Ga) Synthesis of Nanocrystalline Ce0.8Sm0.2O1.9 by Citrate Gel Method Electrical Conductivity of Ceria Co-Doped with Zr and Re (Re=La,Y) Low-Temperature Combustion Synthesis and Characterization of Ce1-xPrxO2-δ Solid Solutions Effect of Moisture on Chemical Stability and Hydrogen Permeability of Ni-BaCe0.9Y0.1O3-δ Cermet Preparation of SrFe0.6Cu0.3Ti0.1O3-δ Mixed Oxygen-Ionic and Electronic Conductor Limiting Current Oxygen Sensors with LSM as Dense Diffusion Barrier Novel Mg Sensors for Application in Molten Al Preparation and Characterization of Gd1-xSrxCoO3-δ Transformation from Monoclinic LiMnO2 to Spinel LixMn2O4 during Electrochemical Cycling Effect of Mn–Doping Content on the Microstructure and Crystallite Size of LiNi0.85-xCo0.15MnxO2 Cathode Materials Structural Studies on Ceria-Carbonate Composite Electrolytes Preparation and Structural Characterization of a Needlelike Carbon from the Refined Coal Tar Pitch Fabrication of Ni-Based Anode Supported SOFCs by Aqueous Tape Casting Manufacture of Electrolyte Component of SOFC Rate Capability Fade of 18650 Li-Ion Cells Solution Combustion Synthesis of LiMn2O4 with Different Starting Reactant Compositions Effects of Fuel Content and Calcination Procedure on Phase Composition and Microstructure of LiMn2O4 Prepared by Solution Combustion Synthesis Effect of Heating Time on the Structural and Electrochemical Properties of LiFePO4 by Molten Salt Method Effect of Annealing on Laser-Ablated K3Li2-xNb5+xO15+2x Thin Films Structure and Optical Properties of SrBi2Nb2O9 Thin Films Fabricated by Pulsed Laser Deposition Pulsed Laser Deposition and Characterization of InZnO Alloyed Thin Film Influence of Mechanical Milling and Annealing Atmosphere on the Photoluminescence Properties of ZnS:Cu,Cl Phosphors Effect of Doping Mode on the Photoluminescence Property of CaS:Eu Phosphor Ultraviolet Photoluminescence on Nano-Crystalline 6H-SiC Gallium and Nitrogen Co-Doped ZnO Thin Films by Pulsed Laser Deposition Synthesis and Characterization of AZO Thin Films by Sol-Gel Process: The Influences of Precursors and Dopants Preparation and Spectral Properties of PVP-Modified ZnO Nanorods Preparation of Sm2O3 Optical Thin Film by Hydrothermal Process Photochromic Properties of WO3 Thin films Effects of Microstructure and Relative Density on the Dielectric Constant of Porous Silica Preparation and Characterization of Porous Silica Obtained by Hydrochloric Acid Selective Leaching Metakaolinite Manganite-Based Heterojunction Position-Sensitive Detectors Optical Scattering Mechanisms of Functional Nano-Material Films on Transmission Display Screen Development of A Novel Elasticoluminescent Material with Calcium Aluminosilicate Elastico-Luminescent Nanoparticles Prepared via Polymer-Coated Precursor Formed in Reverse Micelles Blue-Greenish Light Emission from Stress-Activated SrCaMgSi2O7:Eu Luminescence Property of Eu2+ Doped Strontium Silicate Yellow Phosphor for White Light Emitting Diode VUV Spectral Properties of MBPO7 Co-Doped with Tm3+ ,Gd3+ Luminescence Properties of LnZr(BO3)2:Re (Ln=Ba, Sr; Re=Eu, Ce,Tb) Luminescent Properties of Re2SiO4:Tm3+ (Re=Mg,Ba,Sr) Under VUV Preparation and Luminescent Properties of Zn2SiO4:Mn2+ Sol-Gel Deposition and Luminescence Properties of Spherical Phosphors Ca2Y8(SiO4)6O2:Eu3+ Preparation and Luminescent Properties of SrAl2O4:Eu2+,Dy3+ Preparation and Characterization of SrAl2O4: Eu,Dy Powders Synthesis of Ultrafine GSAG:Ce Phosphor by Solution Combustion Fabrication and Luminescence Properties of Y2SiWO8:Dy3+ Phosphors via Sol-Gel Process Synthesis and Properties of Ca0.85(W1-xMox)O4:Eu0.15 Rare Earth Phosphors Preparation of Upconversion Luminescent NaYF4 Co-Doped with Yb3+/Er3+ via Hydrothermal Synthesis Enhancement of Blue Emission via Upconversion in Solid-State Synthesized Hexagonal NaYF4:Ln3+ Preparation and Characterization of Transparent Nanocrystalline Ceramics Synthesis of Ultrafine MgAl2O4 Powders by Nitrate-Citrate Sol-Gel Combustion Process Preparation and Growth Mechanism of Hexagonal MgAl2O4 Spinel Fibers Dielectric Properties of MgAl2O4 Transparent Nano-Ceramic Highly doped Mn:MgAl2O4 Transparent Ceramics Optical Properties and Microstructure of Mn: MgAl2O4 Transparent Ceramic after HIP Treatment Fabrication of High Transparent YAG Ceramics by Vacuum Sintering at Low Temperature Sinterability of Nd:YAG Powder Prepared by Alcohol-Water Co-Precipitation Method Sintering of Transparent Polycrystal Nd:YAG with MgO as Additive YAG:Ce3+ Nanopowders: Synthesis, Characteristics and Luminescent Properties Preparation of Transparent Nd:Gd2O3-HfO2 Ceramic Preparation of Aluminum Oxynitride Powder by Solid State Reaction Method Influence of Raw Materials on the Carbothermal Synthesis of Single-Phase Aluminum Oxynitride Powder A New Method for the Preparation of Transparent AlON Ceramic Preparation of Transparent AlON Ceramics Using Single-Phase Powder Obtained from Carbothermal Reduction Preparation of Transparent AlON Ceramics Using Powder Synthesized from Nano-Sized Al2O3 and AlN Hot-Pressed Translucent Aluminum Oxynitride (AlON) Ceramics Nanopowder and Fine-Grained Ceramics for Multilayer PTCR Elements Microstructure and Electrical Properties of BaTiO3-Based PTC Ceramics Prepared from Nanopowders Preparation of Bi-Based High Curie Temperature PTCR Ceramic Influence of Liquid Phase on Grain Growth of Ba0.998La0.002TiO3 Ceramics Influence of Rare Earth on the Electrical Properties and Microstructure of Barium Titanate Ceramics Fabrication of BaTiO3-Based Semiconducting Ceramic Thick Films by Aqueous Tape Casting One-Step Electrodeposition of CIGS Thin Films from Alcohol Solution on Flexible Substrate Preparation of ZnO Nanopowder by Chemical Liquid-Phase Method with Polyethylene Glycol Additives Roles of Dopants in Sintering Behavior of ZnO-Based Varistor Corrective Effect of Average Grain Size on Grain Boundary Number of ZnO Varistors Modification of Electrical Properties of T-ZnO Whisker by Doping Fe Influences of Twin Boundaries on Microstructural Characteristics of ZnO Varistors Simulated by Voronoi Network The Nonlinear Characteristics of Different Additives Added V2O5-ZnO Varistor Effect of B2O3 Doping on the Microstructure and Electrical Properties of ZnO-Based Varistors Influence of Pr6O11 on the Characteristics and Microstructure of Zinc Varistors Influences of Dopants on the Microstructural Nonuniformity of ZnO Varistors Effect of Ho2O3 Doping on Performance of ZnO Varistor A New Model for Simulating AC and Surge Properties of ZnO Varistors Based on Microstructural Characteristics Properties of ZnO Varistors Prepared with Nano-Sized Powders Investigation of Electron Traps in SnO2 Based Varistor Ceramics Nanocrystalline Tin Oxide Thick-Film Gas Sensor for H2S Detection Co-Doped Tin Oxide Thin Films by Spin Coating Synthesis of TiO2 Nanotube Arrays Through Multistep Anodization Self-Organized High Aspect Ratios Titanium Oxide Nanotube Arrays Prepared by Anodization Fabrication of Mn2O3 Nanowire with Ultra Fine Morphology via an Electrospinning Technology XPS Research on SrTiO3-Based Voltage-Sensitive Material Thermoelectric Properties of Bi2Te3 Alloy Prepared by Mechanical Alloying and Spark Plasma Sintering Preparation of Bi2Te3 Nano-Powders via an Aqueous Chemical Method Effect of Dopant on N-Type Bi2Te2.7Se0.3 Thermoelectric Materials Fabricated by Spark Plasma Sintering Thermoelectric Properties of n-type (Bi2Se3)x(Bi2Te3)1-x Crystals Prepared by Zone Melting Preparation and Thermoelectric Properties of AgPb18SbTe20 Materials via Hydrothermal Synthesis Method Synthesis and Thermoelectric Properties of Ba8Ga16+xSbxGe30-2x (x=0,1) Clathrate Single Crystals Preparation of Nanosized La2CuO4 Particle by Chemical Precipitation Method and its Thermoelectrical Properties Preparation and Thermoelectric Properties of (Ca1-x-yKxBiy)3Co4O9 Ceramic Preparation and Thermoelectric Properties of Al2O3-Doped ZnO Ceramics Dipole Cluster State and Dielectric Relaxation in Relaxor Ferroelectrics Properties and Numerical Simulation of Electromagnetic Meta-Materials (SRR) Based on Ceramic Substrate Cofiring Behavior of Ferroelectric Ferromagnetic Composites Microwave-Assisted Synthesis of Hexagonal Barium Ferrite Powders with Nano-Particle Hydrothermal Synthesis of Sodium-Potassium Niobate Nanopowders Synthesis of YIG Nanopowders by Sol-Gel Method Magnetic and Dielectric Properties of BST-YIG Composites Solid Phase Synthesis and Sintering Properties of Yttrium Iron Garnet Complex Permeability Spectra of Co-Substituted Lithium Zinc Perminvar Ferrite Synthesis, Microstructure and Magnetic Properties of Nanocrystalline Ni-Zn Ferrite by a Modified Wet Chemical Method Influence of Different Calcination Conditions on the Microstructure and Phase Constitution of Nickel-Zinc Ferrite Nanocrystalline Powders Prepared by a Sol-Gel Auto-Combustion Method Preparation and Magnetic Properties of Dense NiCuZn Ferrite by Spark Plasma Sintering Synthesis, Characterization and Magnetism of Nanosized Copper Ferrite Preparation of Nanosized Barium Ferrite Spinel by a Sonochemical Method Nano-Crystalline Barium Hexaferrite Powders Prepared by Mechanical Alloying Using Acetate Precursor Effect of the Combination of HTR and NTR Processes on the Magnetic Properties of Strontium Hexaferrite Preparation and Characterization of Nanometer Iron Oxide by Sol-Gel Method and Supercritical Fluid Drying Technology Preparation of Zn1-xCoxO Diluted Magnetic Semiconductor by Hydrothermal Method Low Temperature Synthesis of BiFO3 Film by Hydrothermal Method Structure and Magnetic Properties of BaLa0.5Fe11.5O19/ SiO2 Electromagnetic Property of MnZn Ferrite/SrTiO3/PTFE Composites Structure of Gd(5-x)HoxSi4 Solid Solutions Synthesis of Y2BaCuO5 Nanopowder by Co-Precipitation under Ultrasonic Irradiation Effect of Pre-Treatment on the Microstructure and Superconducting Properties of Bi-2223/Ag Tapes Effect of Lead Oxide Compounds on the Microstructure and Properties of Bi-2223/Ag Tapes Study on the Opening and Modifying of MWNTs Synthesis and Hydrogen Storage Capacity of SiC Nanotube Field Emission Characteristics of Orthorhombic Boron Nitride Films Electrical Properties of Sb-Doped BaPbO3 Ceramics An Aqueous Photocrosslinkable Chitosan-PVA (Polyvinyl Alcohol) Binder for Tapecasting Alumina Substrates Dielectric Performance of Alumina Ceramics Sintered at Different Temperatures Synthesis of CuFeO2 Powder by Sol-Gel Method P-Type Transparent Conductivity of Cu1-xAlS2 (x = 0 ~ 0.08) A Novel Temperature Induced Gelation Forming Method Formation of Regular Hexagonal Dislocation Network in Chemical-Furnace Sintered Alumina Phase Transition Activity Characteristics of Nanosized AlOOH in the Hydrothermal Synthesis of Nanosized α-Al2O3 Rheological Behavior of Modified Starch-Alumina Oxide Suspensions Preparation of High-Purity Ultrafine α-Al2O3 by Solid-State Reaction at Room Temperature On the Sintering Activation Energy of α-Al2O3 Control of Ceramic Material Microstructure with Super High Magnetic Field Synthesis Processes of Nano Alumina Abrasive Effects of Rare Earth Oxides on the Microstructure and the Mechanical Properties of High-Purity Alumina Ceramics Sintered at Low Temperature Controlling Porosity and Pore Size Distribution of Alumina Ceramics in Consolidation Forming Process Using Modified Starches Electro-Mechanical and Thermal Properties of Multiwalled Carbon Nanotube Reinforced Alumina Composites Influence of Processing Parameters on Manufacturing Al2O3 Parts by Extrusion Gelation Freeform Fabrication Study on Alumina Ceramics for Dechlorinating Reactor Lining Mullite Fiber Reinforced Alumina Ceramic Matrix Composites Experimental and Numerical Researches of Dynamic Failure of a High Strength Alumina/Boride Ceramic Composite Mechanical Properties and Microstructure of Al2O3/(W, Ti)C Nanocomposite TiN/Al2O3 Composite Material Synthesized by Aluminothermic Reduction Process in Reductive Atmosphere Properties of In Situ Synthesized Alumina Ceramic Core Composites Precision Grinding of Concave Spherical Surface of High-Alumina Influence of Cosurfactant on the Structure and Properties of ZrO2 Nano-Powders Prepared in Microemulsion System Water Debinding for Zirconia Powder Injection Molding Kinetics for Supercritical CO2 Debinding of Injection Molded ZrO2 Rheological Properties and Gelcasting Behavior of Ultrafine ZrO2 Suspension Wear Properties of Y-TZP Ceramics Dispersed with Second Phase Particles Low Temperature Sintered CaTiSiO5-CaTiO3 Dielectric Ceramics Doped by 2ZnO-B2O3 Phase Composition, Mechanical and Thermal Properties of (MgO)0.1-x(YO1.5)x(ZrO2)0.9 and (MgO)0.1-x(CaO)x(ZrO2)0.9 Ceramics Low Temperature Synthesis and Characterization of CaO and MgO- Stabilized Nanocrystalline Tetragonal Zirconia by Citrate Gel Process Fabrication of Porous Zirconia Ceramics by Injection Molding Method Preparation and Characterization of Zirconia-Based Multi-Phase Nanocomposite Effect of Temperature on the Synthesis of ZrO2-Mullite Powders in Molten Sodium Sulfate Effects of Substitution SiC for SiO2 on Microwave Heating of ZrO2-Al2O3-SiO2 System Composites Microstructures, Properties and In Situ Toughening of Rapidly Solidified Al2O3/YSZ Composite Ceramics Prepared by Combustion Synthesis Preparation of SiCw/3Y-ZrO2/Al2O3 Composites Preparation and Performance of AlN-ZrO2 Multiphase Material Preparation and Characterization of Pr-CeO2 Nano-Powders by Co-Precipitation-Hydrothermal Method Influence of Preparation Temperature on Performance of Ce1-xPrxO2 Ultrafine Powder Prepared by a Microemulsion Process Preparation and Characterization of SiO2 Nanoparticles by Microemulsion Method Fabrication of the Monolithic Silica Aerogels Using Sodium Silicate and its Network Strengthening Preparation of Silicon Dioxide Fiber via Sol-Gel Process Synthesis of Core@Shell Composites with Gold Nanoparticles Trapped inside Ceramic Silica Shells by the Sol-Gel Method Effect of Heat Treatment on the Microstructure of TiO2 Nanofibers Prepared by Refluxing in Basic Solution Synthesis of Mullite Nanocomposite from Natural Kaolin Hydrothermal Synthesis of Nanosized Mullite Powders Preparation and Structure Characterization of Mullite Fiber Porous Ceramic Catalyst-Free Synthesis of Mullite Nanosticks Microstructure and Mechanical Properties of Mullite Composites via Pressure Molding and by Oxidation of an Al-Si Alloy Powder A Novel SiC Precursor with High Ceramic Yield: Antimony-Substituted Polysilane (APS) Preparation of Ultrafine SiC Powders by Carbothermal Reduction Synthesis of Silicon Carbide Platelets by Double-Heating Technique Preparation and Properties of SiC Fibers Containing Yttrium and Aluminum Synthesis of Silicon Carbide Whiskers in Electric Field Furnace Preparation of RBSC Green Bodies by Gel-Casting Transpirational Performance of Oriented Porous SiC Transpiration Cooling Materials High Porosity SiC Ceramics with a Narrow Pore Size Distribution SiC Micro-Threads Prepared within the Carbon Fiber Felt Effects of Deposition Temperature on the Growth Characteristics of CVD SiC Coatings Microstructure and Mechanical Properties of C/SiC Composites Prepared at Low Temperatures Properties of SiC/Fe Composites Prepared by Coating Process and Powder Metallurgy Method Surface Characteristics and Aqueous Dispersibility of Commercial Silicon Nitride Powders: Comparison of As-Received Powders Selective Laser Sintering of Si3N4 and Al2O3 Ceramic Powders Properties of Mechanical Activation Combustion Synthesied High α-Content Silicon Nitride Powders and Sintered Bulk Ceramics after Iteration Reactions Combustion Synthesis of β-Si3N4 and β-SiAlON with Elongated Prismatic Micro-Crystals by Adding SrCO3 and NH4F Synthesizing Silicon Nitride Whiskers by Solvothermal and Carbothermal Methods Texturing of Si3N4 Ceramics via Strong Magnetic Field Alignment Fabrication of Thick Silicon Nitride Substrates by Tape Casting Effects of Sintering Additives on Properties of Porous Silicon Nitride Ceramics Fabricated by Carbothermal Reduction Preparation of Si3N4 Ceramics by Aligning α-Si3N4 Whiskers Oxidation and Corrosion of Silicon Nitride at 1200°C and 1500°C Synthesis of Rod-Like α-SiAlON by Carbothermal Reduction-Nitridation Optimization of α-SiAlON Microstructure by Heat Treatment Abrasive Erosion Comparison for a Ceramics and a High Chrome Cast Iron Applied in a Slurry Pump Preparation of In Situ Synthesized SiC Particles Reinforced Highly Porous Si3N4 Ceramics by Gel-Casting Surface Oxidation of Carbon Fiber and its Influence on the Properties of Carbon Fiber Reinforced BN-Si3N4 Composites Sintering Temperature Study of Hot-Pressed Y-SiAlON Ceramics Multi-Step Sintering Method Study of HP Y-SiAlON Ceramics Preparation of β-Sialon from Fly Ash by Carbothermal Reduction-Nitridation Reaction Si3N4-BN-SiO2 Based Microwave-Transparent Materials Wear Property of Superfine Grained Si2N2O-Si3N4 Composites Preparation of SiOC Foam Ceramics Using Polysiloxane Fabrication of MgSiN2 Powders via Combustion Synthesis Process Preparation of SiBCN Microtubes from Melt-Spinnable Polymers Layer Structure Growth of Orthorhombic Boron Nitride Thin Films by RF-PEPLD Preparation of Microcrystalline CBN Abrasive Property and Microstructure of Machinable B4C/BN Nanocomposites Spark Plasma Sintered AlN-BN Composites and its Dielectric Properties Micro Pattern Making Method on AlN-hBN Composites Using Powder Blasting Process Machining Characteristics of AlN-hBN Composites in End-Milling and Precision Lapping Processes Synthesis of SiCW/(Mo,W)Si2 Composite by the "Chemical Oven" Self-Propagating Combustion Method Microstructure Change of Molybdenum Disilicide Heating Unit in Nitrogen Atmosphere at 1700°C Sintering and Properties of MoSi2 Matrix Composites Reinforced by Carbon Nanotubes Wear Behaviors of MoSi2 at Elevated Temperatures Preparation of Titanium Diboride Reticulated Porous Ceramics Influence of Microwave Sintering Environment on the Preparation of AlN Powder and Ceramic Densification of Aluminum Nitride Ceramics with CaF2 Additive Microstructure and Properties of AlN Matrix Composites Fabricated by Reaction Synthesis Microstructure and Phase Composition of AlN/Al Composite Fabricated by Directed Melt Nitridation Ablation Performance and Surface Texture of the Nitride Composites Reinforced by the Braided Silica Fibers Fabrication of High-Content Ti3AlC2 Powders by Mechanical Alloying Mapping of Composition, Phase Transitions and Properties in Oxidized Ti3SiC2 Preparation of Composites from Al and Ti3AlC2 and its Tribo-Chemistry Reactions against Low Carbon Steel Synthesis, Structure and Properties of Ti3(SixAl1-x)C2 Solid Solutions Synthesis of Ti3Si0.4Al0.8C1.8 Solid Solution Pressureless Sintering and Properties of Cu/Ti3AlC2 Composites Argon-Arc Welding of Cu/Ti3AlC2 Cermet Fabrication of Ti2AlC/TiAl Composites with the Addition of Niobium by Spark Plasma Sintering Preparation and Microstructural Evolution of Sol-Gel-Derived Enstatite Fibers Wear Properties of Basalt Fibers Reinforced Composites Preparation of Mg,Al-Hydrotalcite/PE-EVA Flame-Retardant Nanocomposite Effects of CVD C or SiC on the Mechanical and Chemical Properties of Carbon Fibers Damage of T300 Carbon Fiber during Precursor Pyrolysis Effects of Pyrolysis Temperatures on the Microstructure and Mechanical Properties of 2D-Cf/Si-O-C Composites Effects of Molding Pressure on the Microstructure and Mechanical Properties of 2D-Cf/SiC Composites by PIP Routes Complex Permittivity of 3D Textile SiC/C/SiC Composites Fabricated by Chemical Vapor Infiltration at X-Band Frequency Preparation of 3D C/SiC-Cu Composites via Precursor Pyrolysis and Property Investigation Evaluation of the Microstructure of 3D-Cf/SiC Composites Fabricated by Precursor Infiltration and Pyrolysis Improvement of Chemical Liquid Vaporized Infiltration Process for Fast Densification of Carbon/Carbon Composites Influence of Carbon Cloth Filaments Upon the Properties of 2D C/SiC via Precursor Infiltration and Pyrolysis Process Online-Joining of C/SiC-C/SiC via Precursor Infiltration and Pyrolysis Process Preparation and Properties of Hot Pressed 2D C/SiC Composites Preparation and Properties of 2D Carbon Cloth Reinforced Ultra-High Temperature Ceramic Matrix Composites Fabrication of Porous Transpiration C/SiC Composites Oxidation Resistance of 2D C/SiC Composites Fabricated by FCVI Effects of Processing Parameters of SPS on the Densification and Texture of LaPO4 Ceramics Development of Ceramic Composites for Industrial Wood-Cutting Tools Preparation and Characterization of Kaolinite-Glucose Intercalation Compound Thermal Conductivities of β-Si3N4 and BN-Filled Epoxy Molding Compounds (EMC) Heat Storage Performance of a PCM Heat Exchanger with Calcium Chloride Hexahydrate Thermal Energy Storage System of Sulfate / Fiber Matrix Composite Time-Dependent Mechanical Behaviors of Polyamide 6/Nano-SiO2 Composite Effects of Microstructure on Cavity Nucleation in Creeping Ceramics Containing Viscous Grain Boundary Phase High Temperature Tribology and Solid Lubrication of Advanced Ceramics Wear Mechanism and Self Lubrication of Engineering Ceramics at Elevated Temperatures Wear-Resistant Property of SiCp/Al Composites Properties of Carbide-Metal Cermets Prepared from Composite Powders by Direct Reduction and Carburization Process Degassing Behavior and Solid State Reaction of Nano-Ti(CN) Base Cermets in Sintering Fabrication of Superfine Ti(C,N)-Based Cermet by Mechanical Alloying and Subsequent Liquid Sintering Influence of C and Al Addition on Microstructure and Mechanical Properties of Ultrafine TiCN-Based Cermets A Comparative Research on the Compositions and Microstructure of the Ti(CN) Based Cermets in Different Sintering Atmospheres Synthesis of Aluminum Nitride by Nitridation of γ-Al2O3 Nanoparticles in Flowing Ammonia Effects of Mo(Ni) on Valence Electron Structures of TiC/Fe Cermets Preparation and Phase Analysis of Fe-SiAlON-MoSi2 Composites Feasibility Analysis of Self-Reactive Spray Forming TiC-TiB2-Based Composite Ceramic Preforms Preparation and Characterization of Ti0.6Cr0.4OxNy Nano-Sized Powder Hydration Resistance of Al/AlN Bonded Corundum Based Multiphase Material WC-Co Tool Failure Mechanism in Titanium Alloys Machining Effect of Carbon Source on In Situ Carbothermic Reduction Fabricating Steel-Bonded Cemented Carbide GT35 from Ilmenite Intermetallic Alloys Ni3Si and Ni3(Si,Ti): Microstructures and Properties Thermal Conductivity of Sol-Gel Bonded Castables Gelcasting of Alumina-Spinel Refractories Numerical Simulation of Temperature Field and Thermal Shock Resistance Property of Permeable Brick Analysis on Resistance Coefficients and Optimization of Structure and Properties of Porous Permeable Refractory Effects of Rare Earth Oxides on Microstructures and Properties of Magnesia Refractories Tissue Engineering Scaffolds of Bioceramics and New Bone Growth Preparation and Characterization of ß-Tricalcium Phosphate via Wet Mechanochemical Treatment Synthesis of Biomimetic Hydroxyapatite in Syntetic Body Fluids Calcium Polyphosphate Bioceramics with Different Ca/P Ratios Synthesis and Properties of Polyethylene Glycol Diacrylate /2-Hydroxyethyl Mathacrylate Hydrogels Preparation of Calcium-Deficient Carbonated Hydroxyapatite Nanoparticles by Microwave Process Dense Calcium Phosphate Bioceramics Sintered by Microwave Plasma Growth of Apatite in Bovine Serums on Porous HA/TCP Ceramics Structure of Carbonated Hydroxyapatite Based on Rietveld Method Preparation and Characterization of the Porous Hydroxyapatite/Silk Fibroin Composite Scaffolds with Interconnected Ducts Bioactivity, Wear and Corrosion Resistant Properties of Rare Earth/Calcium Phosphate Composite Coatings Bioactive and Stability of Calcium Phosphate-Polypyrrole Composite Coatings by Electrochemical Deposition Bioactive Porous Film Produced on Titanium Substrate by Micro-Arc Oxidation Fabrication and Biocompatibility of Gradient Bioceramic Coatings on Titanium Alloy Substrate by Laser Cladding In Vitro Dissolution Behavior of Biphasic Tricalcium Phosphate Composite Powders Composed of α-Tricalcium Phosphate and β-Tricalcium Phosphate Influence of Applied Voltage on the Structure of Micro-Plasma Oxidized Titania-Based Coatings Formed in an Electrolyte Containing Nano-HA and Calcium Salts and Phosphate Study on Porous Titanium Biomedical Materials Preparation and Characterization of APTES Modified Bioglass Biomineralization Properties of Polyvinyl Alcohol/Bioglass Biocomposite Hydrogels Preparation of ZrO2(f)/PMMA-PMA Composites by a Suspension Polymerization Process Preparation of Porous Polycaprolactone Scaffolds by Using Freeze-Drying Combined Porogen-Leaching Methods Effect of Carbonate on the Properties of Bone Cement Containing PCCP and DCPA Improved Principal Component Analysis on the Comprehensive Hemocompatibility Evaluation of Biomaterials Reconstruction of Cranial Bone Defects Using a Compound of Bone Marrow Stromal Cells and Hydroxyapatite-Tricalcium Phosphate Preparation of Hydroxyapatite Coatings on Carbon/Carbon Composites by a Hydrothermal Electrodeposition Process Residual Stress and Reliability of Glass/Alumina Dental Bi-Layer Ceramics Effect of Multiple Firing on Wear Behavior of Dental Veneering Ceramic Strength and Fracture Mode for Dental Colored ZrO2 Ceramics Coated with Dental Porcelain Mechanical Properties and Microstructure of Partially Sintered Zirconia Ceramics Study on Dental Colored Zirconia Restoration Bond Strengths of Alumina-Glass and Zirconia-Glass Composites to Opaque-Dentine Porcelain In Vitro Biocompatibility Evaluations of Four Dental Ceramics Biological Performance of Dental Biphasic Calcium Phosphate Ceramics Modified by Cold Plasma Effect of SnO Coatings on the Bond Strength between Titanium and Porcelain Tribological Performance of Ultra-Hard Ceramic Composite Coatings Obtained through the Microplasma Oxidation Properties of Al2O3-TiO2 Coating Prepared by Plasma Spraying with an Internally-Fed Powder System XPS Studies on ZrO2 Thin Films Deposited on Glass Substrate by Sol-Gel Mechanical Properties of Nanostructured Zirconia Coatings Fabricated by Air Plasma Spraying Preparation of TiO2-Ni Wear-Resistant Film on Metal Surface Preparation of Molybdate Conversion Coatings on the Anodizing Surface of Aluminum Alloy Hydrothermal Electrophoretic Deposition of Yttrium Silicates Coating on SiC-C/C Composites Fabrication and Evaluation of the Nano-Ceramics Modified Epoxy Coatings Ceramic Coatings on Graphite via Polymer Vapor Pyrolysis Deposition Process Fabrication and Characterization of Ceramic/Metal Composite Wear Preventive Coating Fabrication of TiC Coating on Carbon Steel Surface by SHS/PHIP Friction and Wear Behavior of TiN/TiAlN Coated Ti(C,N)-Based Cermets An Investigation of Structure and Wear Properties of TiN/NbN Films Deposited by Reactive Magnetron Sputtering Reactive Electric Spark Deposition of Ti(CN)–Based Ceramics Coating on Titanium Alloy Substrate Characterization of Laser Cladding WC-Ti Composite Coatings Effect of Cr Additives on the Microstructures and Properties of Laser Cladded Ni3Si Preparation of Ceramic Composite Coatings on Ti-6Al-4V Alloy by Surface Nanocrystallization/Micro-Arc Oxidation Perturbation Molecular Dynamics Simulation of Thermal Conductivity of Zirconia A Promising LaSmZr2O7 Ceramic with Pyrochlore Structure for Thermal Barrier Coatings Thermal Conductivity of (La0.5Sm0.5)2(Zr0.9Ce0.1)2O7 Ceramic for Thermal Barrier Coatings Preparation and Thermophysical Properties of (La0.4Sm0.5Yb0.1)2(Zr0.7Ce0.3)2O7 Ceramic for Thermal Barrier Coatings Modeling and Simulation of Ceramic/Metal Gradient Thermal Barrier Coating Coupled Thermomechanical Analyses for Thermal Shock of Ceramic/Metal Gradient Thermal Barrier Coatings Residual Stress and Stability of Thermal Barrier Coatings during Cyclic Thermal Loading A XPS Study of Atmospheric Plasma Sprayed TiB2 Coatings In Situ Formation of NbC Reinforced Ni3Si Intermetallic Compounds by Laser Cladding Pressure-Dependent Characteristics and Properties of Al2O3-SiO2 Thin Films Deposited on PET Effects of SrAl2O4 Homo-Buffer Layer on SrAl2O4:Eu Phosphors Film Grown on Glass by RF Sputtering Triboluminescence of SrAl2O4:Eu Film with Strong Adhesion Fabricated by a Combination of RF Magnetron Sputtering and Post-Annealing Treatment Magnetite Nanoparticles Surface Coating SiO2 and Magnetic Properties Evaluation Fabrication and Characterization of Bioactive Cancellous-Like Surface on Titanium Rapid Reversible Superhydrophobicity to Superhydrophilicity Conversion of HF-Tuned ZnO Flower-Like Micro-Sphere Films Preparation of Cu Coated ZrW2O8 Composite Powders via Heterogeneous Precipitation Process On the Microstructure of Aluminum Titanate Powders Coated with Mullite Sol Structure and Dielectric Properties of AlN Multilayered Film on Al Substrate Formation of ZrO2-Al2O3 Coating Layers on SiC Fiber by Dip-Coating Process Preparation and Characterization of the Ordered SiO2 Colloidal Crystallization Films Interfacial Coatings on Inorganic Fibers for High Temperature Ceramic Matrix Composites Study on Coating Method to the Stainless Steel Substrate Top of Ag/Al2O3 Catalyst System A Novel Technique for Viewing Stress Distribution with Mechanoluminescence Materials Influences of Alkaline-Earth Metal Oxides on the Properties of Vitrified Bond Influence of Nucleating Additions on the Crystallization in the CaO-MgO-Al2O3-SiO2 Glass-Ceramics Effects of Phosphorus and Fluorine on the Crystallization and Structure of CaO-A12O3-SiO2 System Glass-Ceramic Microstructure and Crystallization Kinetics Analysis of MO-B2O3-Al2O3-SiO2(M=Mg, Ca, Ba) Glass-Ceramics Phase Separation and Nanocrystal TiO2 Formation in Na2O-B2O3-SiO2-TiO2 System Microstructure and Properties of Calcium Borosilicate and Borosilicate Glass-Ceramic Composites Use of Angang Slag for the Production of Glass-Ceramic Materials Effect of ZrO2 on Mechanical and Biological Properties of Calcium Phosphate-Based Glass-Ceramics for Biomedical Applications Properties and Structure of BaO-ZnO-B2O3 Glasses Li2O-Al2O3-SiO2 Glass-Ceramics Used As Anodic Bonding Materials Laser Induced Crystallization of LAS Glass System Doped with Samarium Ion Optical Properties of Ag Nanoparticle-Glass Composites Electrical Conductivity in Alkali Iron Phosphate Glasses Comparison of the DC and AC Conductivities of Li2O-P2O5 Glass Analysis of Electric Conductive Activation Energy from the Electric Conductivity of Silicate and Borate Glasses Preparation and Characterization of the Sol-Gel Derived Bioactive Glass-Fibers The Possibility of Glass Storage Device with Long Term Preservation and High Density Adopted Nd:YAG Laser Microwave Hydrothermal Synthesis of Nanosize TiO2 Preparation of Layered Potassium Titanate Structure Property of Titanium Dioxide Thin Films in Sintered Temperature by the Sol-Gel Method Preparation of Titania Film by Pyrolysis of Chelated Tetrabutyl Titanate Preparation of Titania Film by Vapor Decomposition of Chelated Tetrabutyl Titanate Photocatalyses of Nano-Scaled ZnSe/TiO2 and ZnS/TiO2 Heterojunctions XPS Investigation on Nano-TiO2 Modified by Titanate Coupling Agent Preparation and Characterization of Raspberry-Like TiO2/Cu Composite Particles Influence of Cu2+ Doping on the Photocatalytic Activity of TiO2 Film Visible Light Photoreduction Properties of N-Doped TiO2 Nanostructured Films Hydrothermal Synthesis of Fe/N Co-Doped Titanium Dioxide and its Sterilization Activity via E. Coli under Visible Light Irradiation Sterilization of E. Coli by Fe-Doped TiO2 Modified Photocatalytic Paint under Visible Light Irradiation Nanoporous TiO2/SiO2 Composite Prepared by a Combined Sol-Gel and Hybrid Method Preparation and Photocatalytic Property of WO3-TiO2 /Ti Ceramic Film via Anodic Oxidation Treatment A Series of Bi-Based Oxychlorides as Efficient Photocatalysts Tri-Metallic Catalyst for Mass Production of Quasi-Aligned Carbon Nanotubes by Thermal Chemical Vapor Deposition Self-Organized Zirconia Nanotube Arrays Prepared by Anodization Preparation and Characterization of Macroporous Pumice-Porcelain Composite Foams Preparation of Molybdates with Antibacterial Property Preparation and Bactericidal Properties of Nano-SiO2 Grafted with Macromolecular Quaternary Ammonium Salts Derivative of Alkylated Polyethylenimines Preparation and Characterization of CPC Interclating α-ZrP as VOCs Adsorbent Combustion Synthesis of Alumina-Based Multiphase Foam Ceramic High Temperature Properties of Geopolymeric Ceramic Phase Transformation of Tangshan Ironstone-Tailings at Different Temperatures Preparation of Wear-Resistant Ceramics with Tangshan Ironstone-Tailings Synthesis of Aluminium Titanate Ceramics from Waste Sludge of Aluminium Factory Adsorption of Soluble Metal Ions from Red Mud by Modified Activated Carbon Effect of Calcination Temperature on Mineral Composition of Carbide Slag, Lime Activity and Synthesized Xonotlite Preparation and Characterization of Desulfurization Sorbent from Hydrated Lime and Blast Furnace Slag Local Structures and Decomposed Phases of Laser-Melted ZrSiO4 Effect of Calcination Temperature on the Microstructure and Morphology of Bi3.25La0.75Ti3O12 Powders Synthesized from Polymerized Precursors Mass Loss in SiC Crystal Growth Process Growth and Characterization of Silicon Carbide by Sublimation Reaction Processes and Thermodynamic Modeling for SiAlON Structural Ceramic Powders Synthesized from Nonmetallic Mine Synthesis of Low Agglomerating Spherical α-Fe2O3 Nanopowders Preparation and Thermal Decomposition Mechanism of Sr2+-Doped Mg,Al-Hydrotalcite Nanocrystalline Formation of Mg2Si - 10vol%Al Composite via Solid-State Reaction Thermal Decomposition Kinetics of Ammonium Aluminum Carbonate Hydroxide Analysis of Mechanisms of Spark-Plasma Sintering Practical Evolutions and Computer Simulation of Pores in BaTiO3 Ceramics during Sintering Process Application of Master Sintering Curve Theory to Predict and Control the Sintering of Nanocrystalline TiO2 Ceramic Effect of Sn on the Sintering of Fe-Si Alloys Joining ZrO2 to Al2O3 Ceramics Using Al2O3-ZrO2-SiC Slurries Consolidation of Porous Ceramics Using Protein Foam by Microwave Heating Structure Design for the Joining of Ceramics and Metal Joining of SiC Ceramic to Graphite Using Ni-51Cr Powders as Filler Expansion Coefficient of Sealing Material for Ceramic Metal Halide Lamps Phase Structure and Microstructure of the Interface between WC Steel Bond Hard Alloy and Carbon Steel Joining TiB2-Ni Cermets with Ti6Al4V by Pulse Current Heating Microwave Joining of 95Al2O3 Using Interlayer Containing SiC Interface Microstructure of TiC Cermets/Steel Explosive Cladding Plate On the Interface between Porcelain and Titanium Wettability of Graphite/Ni plus Cr System Stiffness of Cermets Containing Interfacial Arc-Microcracks Strength Analyses of Interference Fit between Ceramic Column and Metal Sleeve Corrosion Behavior of SrZrO3@SiO2 Composite in Sodium Hydroxide Microstructure and Thermal Shock Resistance of LaPO4-ZrO2 Preparation and Characterization of Coated ZnO Nanoparticles Effect of Heat Treatment on Specific Surface Area of Si-C-O Fibers Prediction of the Properties of an Alumina Green Body Using an Artificial Neural Network by a New PSO-Gain Backpropagation Algorithm Optimal Design for Mechanical Properties of Composite with Combination of Genetic Algorithm and Artificial Neural Network Strength Model of Melt-Growth Composite Ceramics Enhanced Mechanism of Fracture Toughness in Cannon Bone Damage Model and Failure Stress of Ceramic Particle Ni Base Alloy Composite Damage Finite Element Analysis of Nano- Composite Ceramics Size Dependent Thermal Expansion Coefficient of Rod-Shaped Oxide Eutectic Ceramic Negative Thermal Expansion of Yb2Mo3O12 and Lu2Mo3O12 Structure and Thermal Expansion Behavior of Dy2-xGdxMo4O15 Solid Solution Multi-Scale Modelling of Sintering Monte-Carlo Simulation for the Grain Growth of Si3N4 during Sintering Process Molecular Dynamics Study of Diffusion Behavior in Amorphous Silica with Hydroxyl Group Application of Improved Back-Propagation Neural Network and Genetic Algorithm to the Preparation Processing of the Mg,Al-Hydrotalcite/Polymer Nanocomposite Modeling on Falling Velocity of Sodiumtetraborate Aqueous Solution Drops before the Gelation of PVA-TiO2 Suspensions by the Runge-Kutta Method in Matlab 6.5 Flying Combustion Experiments and Numerical Simulation for Ti-B4C-C Agglomerated Particles during the Self-Reactive Spray Forming Process Atomistic Simulation of Defect Energy in Pyrochlores and its Effect on Disorder Simulation of the Grain Boundary Effects in PTCR Ceramics Lambdoidal Reinforced Microstructure of Mactridae Shell Ab-Initio Study on Adsorption and Diffusion of Au Atoms on Clean Si(001) and H-Si(001) Surface Practical Advances on the Hot Wire Technique An Original Process of Nanoporous Materials via Templating Nickel Phosphate Colloidal Particles Preparation and Heat Treatment of High Purity Al(OH)3 and Sr(OH)2 Composite Powder Preparation and Characterization of Silica-Alumina-Pillared Montmorillonites with High Surface Area Study of Different TiO2 Electrode Structures on Dye-Sensitized Solar Cell Analysis of Profitability in Chinese Listed Ceramic Companies Characteristics and Mechanisms of Dynamic Oxidation for ZrB2-SiC Based UHTC Effect of Glass Phase on the Thermal Shock Resistance of ZrB2-SiC Ultra High Temperature Ceramic Microstructure and Mechanical Properties of SiC Whisker-Reinforced ZrB2 Ultra-High Temperature Ceramic Efficient Synthesis/Sintering Routes to Obtain Fully Dense ZrB2-SiC UHTC Materials Microstructure and Mechanical Properties of ZrB2-Based UHTC via Reactive Hot Pressing Effect of the Rare Earth Oxides on Sintering Behavior and Microstructure of ZrB2-SiC Ceramics Microstructure of ZrB2–SiC Composite Fabricated by Spark Plasma Sintering Pressureless Sintering of Ultra-High Temperature ZrB2-SiC Ceramics Oxidation Kinetics of ZrB2-SiC Composites Oxidation of Short Carbon Fiber Reinforced ZrB2-SiC Ceramics under Atmospheric and Oxyacetylene Torch Conditions Preparation and Characterization of Stable ZrB2-Based Ultra-High Temperature Ceramics Slurry by Aqueous Gelcasting Reactive Synthesis and Mechanical Properties of ZrB2-SiC-ZrC Composites Properties and Microstructure of an HfB2-HfC-SiC Ultra High Temperature Ceramics Effect of Iron Additive on the Sintering Behavior of Hot-Pressed ZrC-W Composites Combustion Synthesis of Si3N4 from Si/NH4Cl at Low Nitrogen Pressure Preparation and Properties of 2D C/SiC-TaC Composites Effects of Oxygen Content on the Properties of Ultra-High-Temperature Resistant Si-Al-C Fibers Processing and Characterization of Ultra-High Temperature Oxide Fiber-Reinforced Oxide Ceramic Matrix Composites with Improved Thermomechanical Properties Thermal Shock Resistance of Ultra-High Temperature Ceramics Fracture Strength of Ultra-High Temperature Ceramics Microstructure and Mechanical Properties of High Density PCBN Aggregates Mechanical Properties Evaluation of Ultra-High Temperature Ceramics Layered and Graded Coatings as Plasma Facing Materials for Fusion in LSCPM Toughness and Superplastic Deformation of Laminated Ceramic Effect of Residual Stress on the Mechanical Capacity of Layered Composite Transient Thermal Stress Analysis of a Plate with Double-Sided FGM Coatings Temperature Dependency of Dielectric Properties in Epitaxially Grown SrBi4Ti4O15 Films with Different Orientation 0.75SrBi2Ta2O9-0.25Bi3TiTaO9 Layered Structural Thin Films: Microstructure and Ferroelectric Properties Microstructure and Dielectric Properties of LixTixNi1-2xO Thin Films A Stepwise Control Route for the Preparation of Mg-Al, Zn-Al, and Mg-Fe Layered Double Hydroxides (LDHs) Fabrication of ZrO2-SUS Functionally Graded Materials by Slip Casting Preparation of Nano-Laminated Composite by Electrophoretic Deposition Preparation of Glass-Alumina Functionally Gradient Materials by Rapid Prototyping Technology Ti/Al2O3 and Ni/Al2O3 Laminates Prepared by Plasma Activated Sintering (PAS) TiN/Al2O3 Functionally Graded Material Fabricated by In Situ Reaction Corrosion Protection of Stainless Steel by ZrO2-CeO2 Sol-Gel Coatings Fabrication of SiC Dense-Porous Laminates by Electrophoretic Deposition Process Effect of Silicon Carbide Interlayers on the Mechanical Behavior of T800-HB-Fiber-Reinforced Silicon Carbide-Matrix Composites Dynamic Observation of Fracture Process in a Silicon Carbide- Matrix Laminated Ceramic Composite Preparation of Ternary Layered Ti3SiC2 Ceramic by SHS/PHIP Fabrication and Mechanical Properties of B4C/BN Laminated Ceramics Joining CoSb3 to Metal Surface of FGM Electrode for Thermoelectric Modules by SPS Splat Formation of Plasma Sprayed Functionally Graded YSZ/NiCrCoAlY Thermal Barrier Coatings Preparation and Characterization of Multilayered Mullite/Mo Functionally Gradient Materials Preparation of Mg-W Graded Materials by Spark Plasma Sintering Cladding of WC-Cr3C2 Cermet Coating by Laser Controlled Reactive Synthesis Microstructure and Mechanical Properties of Graded Materials Prepared by Field-Activated and Pressure-Assisted Combustion Synthesis Material Design of Alkaline Niobate Piezoelectric Ceramics Preparation of KNbO3 Powder by Modified Pechini Method from Layered Perovskite Aqueous Solution Phase Development during Mixed–Oxide Processing of a [Na0.5K0.5NbO3]1-x -[LiTaO3]x Powder Influence of Sintering Temperature and Sintering Aid on Electrical Properties of (K, Na)NbO3-LT Ceramics Temperature Dependence of Raman Spectrum of Lead-Free Piezoelectric (Na0.5K0.5)NbO3-LiNbO3 Ceramics (1-x)(K0.44Na0.52Li0.04)(Nb0.84Ta0.10Sb0.06)O3-xSrTiO3 Lead Free Piezoelectric Ceramics Hydrothermal Synthesis of Na(Nb1-xTax)O3 Powder for Fabrication of Lead-Free Piezoelectric Ceramics Fabrication and Characterization of Li2O Excess (Na0.49K0.49Li0.02)(Nb0.8Ta0.2)O3 Piezoelectric Ceramics Preparation and Characterization of High Textured KSr2Nb5O15 Lead-Free Piezoelectric Ceramics Morphotropic Phase Boundary Study of the BNT-BKT Lead-Free Piezoelectric Ceramics Piezoelectric and Dielectric Properties of (Bi0.5Na0.5)0.94(Ba1-xSrx)0.06TiO3 Lead-Free Piezoelectric Ceramics Piezoelectric and Dielectric Properties of Bi2O3-Doped (Bi0.5Na0.5)0.94Ba0.06TiO3 Lead-Free Piezoelectric Ceramics Grain Growth and Electric Properties of Lead-Free BaTiO3 Ceramics


Best Sellers


Product Details
  • ISBN-13: 9783038131939
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 368-372 Key Engineering Materials
  • ISBN-10: 3038131938
  • Publisher Date: 11 Feb 2008
  • Binding: Digital download and online
  • No of Pages: 2000


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
High-Performance Ceramics V: (Volumes 368-372 Key Engineering Materials)
Trans Tech Publications Ltd -
High-Performance Ceramics V: (Volumes 368-372 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

High-Performance Ceramics V: (Volumes 368-372 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!