Buy High-Performance Ceramics IV by Wei Pan at Bookstore UAE
close menu
Bookswagon
search
My Account
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > High-Performance Ceramics IV: (Volumes 336-338 Key Engineering Materials)
High-Performance Ceramics IV: (Volumes 336-338 Key Engineering Materials)

High-Performance Ceramics IV: (Volumes 336-338 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

The special volume aims to promote the interactions among scientists, engineers, technicians and students engaged in advanced ceramics research, development and production and provides a forum for the presentation, discussion and review of the latest advances in the field of the science and technology in the field of advanced ceramics successfully. More than 767 peer reviewed papers present the most up-to-date knowledge in this field.This volume will therefore be of great interest to any scientist or engineer working in the field of high-performance ceramics.

Table of Contents:
Processing, Properties and Possible Applications of PZT-Based Thin Films High Piezoelectric Property and Low Dielectric Constant PZN-PZT Ceramics Molten Salts Synthesis of Relaxor Ferroelectrics PMN-PT Powders Effect of PbO-Based Glass Frit Additives on Physical and Electrical Properties of 0.125PMN-0.875PZT Piezoelectric Ceramics near the Morphotropic Phase Boundary Electrical Properties of (1–x)(0.8PMN-0.2PNN)-xPT Ceramics near the Morphotropic Phase Boundary Effects of Rare Earth Gd Doping on Ferroelectric Properties of PbZr0.52Ti0.48O3 Thin Films Prepared by Sol–Gel Methods <001> Textured Pb(Mg1/3Nb2/3)O3–PbTiO3 Ceramics Prepared by Reactive Templated Grain Growth The Effect of Zn2+ Deficiency on Ordered Micro-Regions and Dielectric Properties of Pb(Zn1/3Nb2/3)O3-Based Relaxor Ceramics Structure and Electrical Properties of Pb(Ni1/3Nb2/3)O3-Pb(Zr/Ti)O3 Relaxors Pb(Mg1/3Nb2/3)O3- Pb(Ni1/3Nb2/3)O3-PbTiO3 Crystals by Solid State Growth Effect of Different Doping on the Structure and Field-Stability of PMNT Ceramics Structure and Electrical Properties of Rapid Thermally Annealed PZT Films Deposited through Sol-Gel Process Dielectric Properties and Phase Transition of [110]-Oriented 0.68PMN-0.32PT Single Crystals Induced by Temperature and DC Electric Field Preparation of Pb(Mg1/3Nb2/3)O3 Relaxor Ferroelectric by Sol-Gel Route Dielectric Properties of (Bi1/2Na1/2)TiO3-SrTiO3 Ferroelectric Ceramics Dielectric Properties of Y3+-Doped Ba0.62Sr0.38TiO3 Ceramics Piezoelectric and Dielectric Properties of (Bi0.5Na0.5)TiO3- (Bi0.5K0.5)TiO3-BaTiO3 Lead-Free Piezoelectric Ceramics Investigation of Field-Induced Piezoelectric Properties in Pb(Mg1/3Nb2/3)O3-PbTiO3 Ceramics for Transducer Applications Low Temperature Sintering (Ba1-xSrx)TiO3 Ceramics by Using CuO-TiO2 Mixture as Sintering Aid Preparation of Plank-Like BaTiO3 by Hydrothermal Soft Chemical Process from Layered Titanate Precursors Preferred Orientation Growth of Ba0.6Sr0.4TiO3 Thin Films with Epitaxial MgO Buffer Layer on Si(100) Substrate Reliability of Ba(Zr0.1Ti0.9)O3 Ferroelectric Thin Films under Various Frequencies for Nonvolatile Memory Application Preparation and Characterization of Citrate Sol-Gel Derived Ba(Zr,Ti)O3 Ceramics with Al2O3 Addition Effect of Deposition Parameters on Crystallization of RF Magnetron Sputtered BST Thin Films The Effect of Different Doping Methods of Sintering Aids on the Barium Titanate Based X7R Ceramics Preparation of Ferroelectric BaTiO3 Films by Electrophoretic Deposition Technique Preparation and Dielectric Properties of the Nb and Co Doped Barium Titanate by Sol-Gel Auto-Ignition Synthesis Process Fabrication of (Ba,Sr)TiO3 Thin Films by Hydrothermal Crystallization of Sol-Gel Precursor Dielectric Properties of HGRP BaTiO3 Based X7R Materials Synthesis and Characteristics of Infrared-to-Visible Upconversion Nanoparticles through a Microemulsion System Influence of Different Dopants on the Piezoelectric Properties of the Na1/2Bi1/2TiO3-BaTiO3- Lead-Free Ceramics Tape Casting of Ba0.7Sr0.3TiO3 for Tunable Microwave Devices Electrophoretic Deposition Ba0.65Sr0.35TiO3 Thick Films for Tunable Microwave Devices (Ca,Sr,Ba)TiO3-Based Dielectrics Sintered in Reducing Atmosphere Electric and Damping Properties of PU Based IPNs-BaTiO3 Nanocomposites Texture Development in Na1/2Bi1/2TiO3-BaTiO3 Ceramics by Reactive-Templated Grain Growth Effect of Sr/Ba Ratio on Dielectric Properties of BSTN Ceramics The Influence of Thin Film Thickness on the Characteristics of Bismuth Titanate Oxide Structure and Dielectric Properties of Homogeneous Srm-3Bi4TimO3m+3 (m = 3, 4, 5, and 6) Ceramics The Influence of Precursor on the Microstructure and Characterization for Sr0.5Ba0.5Bi4Ti4O15 Thin Films Synthesis and Properties of (Bi0.5Na0.5)TiO3 Powders by Hydrothermal Method Fabrication and Properties of SrBi2(Ta1-xNbx)2O9 Ferroelectric Ceramics Study on Ferroelectric Properties of Nd-Doped Bi4Ti3O12 Thin Films Prepared by Sol-Gel Method Electrical Characteristics and Microstructures of Gd-Doped Bi4Ti3O12 Ceramics Electrical Characteristics and Microstructures of Nd2O3-Doped Bi4Ti3O12 Thin Films Dielectric Characterization and Microstructures of Pr6O11-Doped Bi4Ti3O12 Thin Films Dielectric Characteristics of Doped Strontium Titanate within Broad Temperature Range Hydrothermal Preparation of Bismuth Titanate Nanopowders Fabrication of Bi3NbTiO9 Thick Films by Air Flow Deposition The Crystalline, Dielectric and Pyroelectric Properties of (1-x)Pb(Sc0.5Ta0.5)O3-xPb(Zr0.52Ti0.48)O3 Relaxor Ferroelectric Ceramics Epitaxial Growth and Electrical Characterization of PBZT Thin Films by RF Magnetron Sputtering Deposition Microstructure Characteristics in the BaTiO3-La2O3-Nb2O5 Ternary System Ferroelectric Properties of Bi3.4Y0.6Ti3O12 Thin Films Prepared by a Modified Sol-Gel Process Phase Structure and Electrical Properties of Bi1/2Na1/2TiO3-KNbO3 Lead-Free Piezoelectric Ceramics Sintering and Dielectric Properties of Excess Bi2O3 Doped BaBi2Nb2O9 Ceramics Preparation of Bi-Layered SrBi2Ta2-xVxO9 Ceramics (0.1 ≦ x ≦ 0.4) Microwave Dielectric Properties of Ca[(Li1/3Nb2/3)0.95Zr0.15]O3+δ Ceramics with Ba2+ Substitution at A-Site Influence MnO2 on the Properties of (LixNayK1-x-y)NbO3 Ceramics Preparation of Ferroelectric K0.5Na0.5NbO3 Films by Sol-Gel Processing Composition Range of Morphotropic Phase Boundary and Electrical Properties of NBT-BT System Effects of Processing Conditions on the Dielectric Properties of CaCu3Ti4O12 Ceramics Preparation and Characterization of LiNbO3 Thin Films Derived from Metal Carboxylate Gels Bridgman Growth of a Novel Piezoelectric Single-Crystal Material: Ca3NbGa3Si2O14 Preparation and Properties of (La, Sr) MnO3 Thin Films Prepared by Sol-Gel Method Na1-xKxNbO3 (x=0.2~0.8) Lead-Free Piezoelectric Ceramics Prepared by Spark Plasma Sintering Effect of TiO2 Nanopowders on the Sintering and Electric Properties of Lead Zirconate Titanate Ceramics Stability of the Perovskite Structure in BSPT-Based Ferroelectric Ceramics Properties of Ultrafine High Curie Temperature (1-x)BiScO3-xPbTiO3 Ferroelectric Ceramics Preparation of Composite Ceramics of NiFe2O4/PZT by Sol-Gel Method and their Magnetoelectric Effect Investigation of High-Quality ZnO Film on Polycrystalline Diamond Wafer for Fabrication of High Frequency SAW Filter Preparation of BaTi4O9 - BaPr2Ti4O12 Composite Powders via Ethylenediaminetetraacetic Acid Precursor The Influence of La2O3 Additive on the Dielectric Properties of Ba0.6Sr0.4TiO3-MgO Bulk Ceramics Preparation of BaSm2Ti4O12 Microwave Dielectric Ceramics via a Polyacrylamide Precursor Phase Development and Microwave Dielectric Properties of Ba4(Sm1−yNdy)9.33Ti18O54 Fabrication of Ba6-3x(Sm0.2Nd0.8)8+2xTi18O54(x=2/3) Ceramics by Solid State Reaction The Microwave Characteristics of Glass-Ba2Ti9O20 Ceramics Effects of Ta5+ Substitution on Structure Transition and Microwave Dielectric Properties of Zn(Nb1-xTax)2O6 Ceramics Influence of Hydrothermal Conditions on ZST Powders for Microwave Ceramics Dielectric Properties of Ba(Mg0.2/3Zn0.8/3Nb2/3)O3 and Ba1-xSrx(Mg0.2/3Zn0.8/3Nb2/3)O3 Microwave Ceramics Effects of CeO2 Additive on Property of Ba0.6Sr0.4TiO3-MgO Ceramics for Phase Shifter Effects of CuO and V2O5 Addition on Sintering Behavior and Microwave Dielectric Properties of (1-x)Ca2P2O7-xTiO2 Structure and Dielectric Properties of Zn Doped PST Thin Films Prepared by Sol-Gel Method Microwave Dielectric Properties of (1-x)(Ca0.61Nd0.26)TiO3–x(Li0.5Sm0.5)TiO3 Temperature Compensated (1-x)(Na0.5La0.5)TiO3+xCeO2 Microwave Dielectric Ceramics Incorporated with Copper Oxide Preparation and Microwave Dielectric Properties of (1-x)Ca2/5Sm2/5TiO3 -x Li1/2Nd1/2TiO3 Ceramics Effect of ZnO-V2O5 Co-Doping on Phase Stability and Microwave Dielectric Properties of ZnTiO3 Ceramics Effect of V2O5 Addition on the Microwave Dielectric Properties of Ba(Mg1/3Nb2/3)O3 Ceramics Structure and Dielectric Properties of Citrate Sol-Gel Derived Microwave Ceramics in CaO-ZnO-TiO2 System Microwave Dielectric Property of Porous Silicon Nitride Ceramics Preparation and Microwave Permittivity of SiC-AlN Solid Solution Powders Properties of Silicon Nitride Using Cordierite as Sintering Additives Research on Sintering Dynamics and Microwave Dielectric Properties of Bi and Mn Doped Lead-Based Ceramics A Piezoelectric Actuator for Transporting Living Cells Organic-Inorganic Nanocomposite Electrodes for Dielectric Elastomer Actuator Electro-Mechanical Coupling Performances of a Piezoelectric Bimorph Mechanical Properties of Piezoelectric Stack Actuators under Electro-Mechanical Loading Analysis of Dynamic Response for Piezoelectric Vibration Converter by Finite Element Simulation A Novel Cylinder Driving Ultrasonic Motor Actuative Properties of CP Actuator Consisting of Polypyrrole Film and Solid Polymer Electrolyte Resonant Modes of Piezoelectric Disc Structure and their Application in Micro Ultrasonic Motors Dynamic Properties of Fine-Scale 1-3 PZT/Epoxy Piezoelectric Composites A-Site Cational Size Disorder Effects in La0.55Ca0.45MnO3 Electric Fatigue of PZT Piezoelectric Ceramics under Bias and Unipolar Pulse Cycling Field Bipolar Electric Fatigue in Ferroelectric Nb-Doped PZST Ceramics Propagation and Deflection of Electric-Field-Induced Microcracks in 0.69Pb(Mg1/3Nb2/3)O3-0.31PbTiO3 Ferroelectric Single Crystals Degradation of Lead Zirconate Titanate Piezoelectric Ceramics Induced by Water and AC Voltages Degradation Aging of BaTiO3 Microwave Ceramic Capacitors for EMI Applications at High-Voltage The Interfacial Characteristics of Ba0.6Sr0.4TiO3 Films Deposited by Radio Frequency Magnetron Sputtering Dielectric and Magnetic Properties of BaTiO3/NiFe2O4 Composites Dielectric Properties of Pb(Zr,Ti)O3 Heterolayered Thick Films Fabricated by Screen-Printing Method Fabrication and Electrical Conductivity of a YSZ-NiCr Cermet Preparation and SEM of Ni/Ce-YSZ Anode Materials Proton Conductivity of Amorphous Hydrated Zirconia-Yttria Solid Solutions Synthesis and Characterization of (Gd, Y)-Doped Ceria Electrolytes for Solid Oxide Fuel Cell Preparation and Properties of Ce0.9Sm0.1O1.95 as the Electrolytes of IT-SOFC Nitrate-Citrate Combustion Synthesis and Properties of Ce1-xGdxO2-x/2 Solid Solutions Structural and Morphological Transformation of NaX Zeolite Crystals at High Temperature A Study on SrCe0.9Y0.1O3-α Synthesized by Solid State Reaction and the Liquid Citrate Method High Performance Low Temperature Ceramic Fuel Cell with Zinc Doped Ceria-Carbonates Composite Electrolyte Limiting Current Oxygen Sensors with LSF as Dense Diffusion Barrier Structure and Ionic Conductivity of Ln2Zr2O7-Type Rare Earth Zirconates Electrical Conductivity of Mixed Conductors (YO1.5)x-(CeO2)y-(ZrO2)1-x-y Novel Catalytic Electrodes for High Performance Solid Oxide Fuel Cells Operated at Intermediate Temperatures Fabrication of YSZ/Ni Composites by Gelcasting Microstructure and Electrical Conductivity of Ni-YSZ Cermets Prepared by Combustion Synthesis Method NiO-SDC Powder for Solid Oxide Fuel Cell Anode Applications by Buffer Solution Method Preparation and Characterization of Sm1-xSrxCoO3 Ceramics by the Gelcasting Process Preparation and Electrical Properties of Interconnect Material Made by Substituting Mixed Rare Earth Oxides (Sm2O3, Gd2O3, Eu2O3 and CeO2) for La2O3 in La On the Sealing Materials for SOFC Investigation on Structure and Electrochemical Properties of Li[Ni1/3Co1/3Mn1/3]O2 for Lithium Ion Batteries Electrochemical Performance of Al2O3-Coated LiNi1/3Co1/3Mn1/3O2 Cathode Materials for Li-Ion Batteries Synthesis and Electrochemical Properties of a LiNi0.7Co0.3O1.9Cl0.1 Cathode Material for Lithium-Ion Battery Improvement of the Electrochemical Performance of LiFePO4 Cathode Composite Material Using a In Situ Pyrolysis Carbon Synthesis Procedure Preparation and Electrochemical Characterization of Mn/Pb Composite Oxides for Supercapacitors Design and Preparation of Nano-Electrodes for Dye-Sensitized Solar Cell Preparation of Spherical Spinel LiMn2O4 Cathode Material for Lithium Ion Batteries Ultra Stable Sealing Glass for Intermediate Temperature Solid Oxide Fuel Cells Preparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel Cells Fuel Cell Studies Using the CeO2-La2O3 Based Electrolytes Novel AC-MO-CSC Anode for Direct Methanol Low Temperature Ceramic Fuel Cells Manufacturing Processes of Solid Oxide Fuel Cell Components Electrochemical Performance of AA Size MCMB/LiCoO2 Lithium-Ion Battery Using Three-Electrode Cell LiNiO2 Thin Films Fabricated by Diffusion of Li on Ni Tapes Improvement of Electrochemical Properties of LiFePO4/Carbon Composite Doped by Al3+ Ions Spinel Li4Ti5O12/C Composites as Potential Anode Materials of Lithium Batteries Al2O3 Coating of Spherical LiNi0.8Co0.2O2 for Li-Ion Batteries Fine Lithium Iron(II) Phospho-Olivine Prepared by Different Methods Fine-Particle Lithium Iron Phosho-Olivine Synthesized by a Novel Modified Solid-State Reaction The Effect of Silicate Layers on Electrochemical Properties in Nanocomposite Solid Polymer Electrolytes Low Temperature Electrolyte for Li-Ion Batteries Poly(Acrylonitrile-Methyl Methacrylate) Based Microporous Gel Electrolyte for Li-Ion Battery Novel-SiO2-Doped Proton Exchange Membrane for Self-Humidifying Fuel Cell Nano Sulfur Composite for Li/S Polymer Secondary Batteries Optical Property of Spark Plasma Sintered Translucent AlN Ceramics Modification of Optical Waveguide Material PMMA with Nano-Silicon by Sol-Gel Approach Synthesis and Second-Order Optical Nonlinearity of Inorganic-Organic Hybrid Films Bearing Y-Type NLO Active Chromophore Optical Properties of Nanocrystalline Ag Doped Silica Inverse Opals Large Nonlinear Optical Property of SrBi2Nb2O9 Thin Films Prepared by RF Magnetron Sputtering Up-Conversion Luminescence in Thulium Doped Barium Titanate Inverted Opal Dependence of Electrical and Optical Properties of the Al Doped ZnO for Transparent Conductors Deposited by rf–Magnetron Sputtering on the O2/Ar Gas Flow Ratio Crystallinity and Photoluminescence Properties of ZnO Films on Zn Buffer Layers Deposited by rf Magnetron Sputtering Fabrication, Properties and Theoretical Simulation of Multi-Layer Ceramic Structure Meta-Materials Influence of Coumarin Dyes on the Laser Performance of Pyrromethene and Perylene Dyes Co-Doped into ORMOSILs Growth and Characterization of Zinc Oxide Films by Pulsed Laser Deposition for Ultraviolet Detection Enhancement of the Quality of the ZnO Thin Films by Optimizing the Process Parameters of High-Temperature RF Magnetron Sputtering Preparation and Characterization of ZnO Thin Film Doped with Eu via Sol-Gel Method Zinc Oxide Thin Films with Reduced Native Compensative Defects Grown by Ultrasonic Spray Pyrolysis at Atmosphere Synthesis and Characterization of Y2O3:Eu3+ Film Derived by Sol-Gel Processing Luminescence Properties of MO-Re2O3-B2O3:Eu3+ (M= Mg, Sr; Re=Y, Gd ) under VUV Excitation Preparation and Properties of Ti, Eu Co-Doped Y2O2S:0.06Ti,0.08Eu Phosphor with Red Long Afterglow Luminescence Reducing Mechanism of Cd Doped Y2O2S:Ti,Cd Long Afterglow Phosphor Modification of Ce-Doped YAG Phosphor with Flux and Ion Substitution Synthesis of Green-Emitting Phosphor Y3Al5O12: Tb, Ce, Gd by Sol-Gel Method Study on the Synthesis of Long Afterglow Nano-Phosphors SrAl2O4:Eu,Dy by Microemulsion Method Preparation of a New Red Long Afterglow Phosphor Strontium Aluminate Composition Luminescence Properties of Spherical Phosphors SrSiO3:Eu3+ Luminescence Properties of M2MgSi2O7: Re (M = Ba, Sr, Ca) (Re = Eu2+, Ce3+, Tb3+) Luminescent Properties of Sr2B5O9Cl Phosphor Doped with Eu Synthesis and Luminescent Properties of Ce3+-Activated SrGa2O4 and Sr(Ga-Al)2O4 Microstructural and Micromorphological Studies on ZnSe Single Crystals Using AFM/FE-SEM/RO-XRD Ga2O3 Films Grown on Sapphire by the Thermal Evaporation of GaN Powders Synthesis of Ultrafine Lu2Hf2O7/Tb Phosphor by Solution Combustion Process White Anodic Coatings on Aluminum Alloy with Low Ratio of Solar Absorptance to Infrared Emittance Near-Infrared Luminescence and Energy Transfer Characteristics of Dy3+-Tm3+ Co-Doped Selenide Glasses Effects of Glass Frits on the Properties of Luminescent Ceramics Strong Near-Infrared Luminescence from NiSi2-Passivated Silicon Nanocrystals Embedded in SiOx Films Annealing Environment Effect on the Nanocrystalline Silicon Related Photoluminescence in Silicon Rich Alumina Films On the Multilayered Chip-Type PTC Elements Prepared by Roll-Forming Process Liquid Desiccant Drying Method for Gelcasting PTC Ceramics Based on BaTiO3 Microwave Synthesis of BaTiO3 from BaCO3 and TiO2 Relations between the Morphology of ZnO Powders and the Electrical Performance of ZnO Varistors Equivalent Model of Modified Bismuth Oxides Described by Fractional Derivatives Microstructure and Electrical Properties of ZnO-Pr6O11-Dy2O3-Based Varistor Ceramics Doped with La2O3 Preparation and Acetone Sensitive Characteristics of Pure and Cu2+-Doped LaFeO3 Semiconductor Thin Films Synthesis of La-Mn Substituted M-Type Ba Hexaferrites by Sol-Gel Method Ferromagnetic Properties of Ni0.2Cu0.2Zn0.6Fe2O4-PZT Composites A New Low-Temperature Sintering Method for NiCuZn Ferrite An Investigation on the Optimum Conditions for Preparation of Pure Mn-Mg-Zn Ferrite Powder Optimization of the Effective Parameters on the Synthesis of the Mn-Zn Ferrite Powder with a High Saturation Magnetization Using Different Iranian Routs of Iron Oxide Effect of Phase Formation on Magnetism of Sol-Gel Derived PbTiO3/(Ni, Pb) Ferrite Composite Powders Complex Impedance Spectroscopy of Bi-Substituted Yttrium Iron Garnet (YIG) Application of Rare Earth Permanent Magnet on Magnetic Abrasive Machining Growth and Characterization of BaZrO3 Buffer Layer for Textured YBCO Thin Films Growth on MgO (00l) Substrate The Stability Range of Lead Oxide Compounds in Bi-System High Temperature Superconducting Materials Synthesis of MgB2 from Anhydrous B2O3 by Ball Milling Method and Determination of Superconductivity Properties CeO2 Buffer with (200) Preferential Orientation on R-Cut Sapphire by a Solution Deposition Technique Preparation of BaRuO3 and BaIrO3 Films by Laser Ablation Effects of Different Antimony Dopants on ZnO-V2O5 Based Varistor Ceramics Fabrication of High Performance Multilayer ZnO Varistors with Chemically Synthesized Doped Zinc Oxide Powder Effect of V2O5 Additive on the Microstructure and Electrical Properties of Mn-Co-NiO NTC Thermistor Modification of Thick-Film Conductors Used in IP Technology for Reduction of Warpage during Co-Firing of LTCC (Low Temperature Co-Fired Ceramic) Modules Morphologies and Microstructures of Antimony-Doped Tin Oxide Films Derived by Sol-Gel Dip-Coating Processing The Optical and Electrical Properties of Antimony-Doped Tin Oxide Transparent Conducting Thin Films Prepared by Sol-Gel Dip-Coating Technique Improved Electrodeposition of CuIn1-xGaxSe2 Films Study of In2O3 Thin Films Prepared on TiN Substrates Using a Triethylindium and Oxygen Mixture Resistivity-Temperature Properties of La(TixMn1-x)O3 Ceramics Control of Shrinkage Behavior and Thermal Expansion Coefficient in BaTiO3-Added Ni Electrodes Fabrication of Heater Element in Release System A Novel Ceramic Pressure Sensor Effect of Treatment Process on the Structure and Properties of Sr0.48Ba0.24Ca0.28TiO3-Based Varistor Ceramics Microstructure and Properties of Ni0.5Zn0.5Fe2O4-BaTiO3 Ceramic Dielectric Properties of LTCC System of Al2O3 and Borosilicate Glass Fabrication of BN-AlN-TiB2 Compound Conductive Ceramics by Self-Propagating High Temperature Synthesis and Hot Isostatic Pressing Effect of Raw Materials on the Thermal Conductivity and Microstructure of Aluminum Nitride SrTiO3 Based Dual-Functional Ceramics with Nano-Additives Dielectric Properties of Boron Nitride-Aluminium Nitride Composites Prepared by Spark Plasma Sintering Preparation and Properties of Ni-Si-O Thin Film Prepared by Sol-Gel Method Na-Site Doping of NaCo2O4 Thermoelectric Materials Preparation and High Temperature Thermoelectric Properties of [Ca2(Co0.65Cu0.35)2O4]0.624CoO2 Compound Large Thermoelectric Response of Ti-Containing Perovskite Oxides Progress in Researches on the Layered Cobalt Oxides for Thermoelectric Devices Modulated Structure of Bi1.8Sr2.0Rh1.6Ox Preparation and Properties of Zinc Oxide and Titanium Oxide Ultra-Fine Composite Particles for Attenuation of Ultraviolet Radiation Static and Dynamic Characteristics of Thermoelectric Ceramics Synthesis and Thermal Properties of Nanoscale Skutterudite via Cross-Coprecipitation Microstructure and Thermoelectric Properties of CoSb3 Synthesized by MA-SPS Method Synthesis and Lattice Thermal Conductivity of Double Atoms Filling p-Type CamCenFexCo4-xSb12 Compounds High Temperature Thermoelectric Property of Sr-Filled Skutterudite SryCo4Sb12 Influence of Extrusion Temperature on the Thermoelectric Properties of p-Type Ag Added (Bi0.25Sb0.75)2Te3 Alloys Prepared by MA-PDS Preparation of AgxPbmSbTe2+m-Based Thermoelectric Materials by MA-SPS Method and Evaluation of their Thermoelectric Properties Thermoelectric Properties of Ag1-xPbmSbTe2+m Compounds High Temperature Thermoelectric Properties of AgPb18+xSbTe20 Annealing Effects on Powder Metallurgy Based Pb1-xSnxTe Materials for Thermoelectric Applications Thermoelectric Properties of Bismuth Telluride Based Materials Prepared by Powder Metallurgy Processing Electrical Properties of P-Type Thermoelectric AgxBi0.5Sb1.5-xTe3 (x=0.05~0.4) Alloys Prepared by Spark Plasma Sintering Template Synthesis of Bismuth Porous Films and Networked X-Shape Nanowires The Influence of Oxygen on the Electrical Properties of Bulk and Thin Films of PbTe Semiconductors Structural Evolution of Nb/NbC Multilayer Coatings Heat to Electricity Conversion Efficiency Measurement for Thermoelectric Unicouple High-Efficiency Thermoelectric Air-Conditioner Novel High-Intensity Thermoelectric Generator and its Application on Hybrid Electric Vehicle Preparation and Characterization of Sr, Ba Filled Type-I Ge Clathrate Single Crystals Thermoelectric Properties and Mechanism on Porous Silicon Wafer Structural and Optical Ceramics: Yesterday, Today, and Tomorrow On the Progress of Combustion Synthesis of Si3N4 Ceramic: From Laboratory Research to Industrial Production Fabrication and Characteristics of Al2O3/Cu Composite Particles by MA & PCS Preparation of Submicron Silica Powders from Sodium Silicate Using Ultrasonic Energy Preparation of Mullite Powder by Aluminum Sulfate and Silica in Molten Sodium Sulfate Preparation of Ultrafine β-Sialon Powder by Citrate Sol-Gel and Carbothermal Reduction Nitridation Preparation of (Ca+M) (M=Mg, Yb, Sr) Co-Doped α-SiAlON Powders by Combustion Synthesis Preparation of Sialon Using Fly Ash with High Content of Al2O3 Combustion Synthesis of Magnesium Silicon Nitride Powders in the Mg-Si-N System SiC Platelets Synthesized by Powder-Heating Technique Synthesis of Sialon-Mullite Composites Using Fly Ash by Carbon-Thermal Reduction Nitridation Carbothermal Preparation of Ultra-Fine TiB2 Powders Using Solution-Derived Precursors via Sol-Gel Method Large-Scale Fabrication of Ti3AlC2 Powder with High-Purity Study of Ti3Si1.2-xAlxC2 (x = 0~1.2) Solid Solution via X-Ray Diffraction Mechanically Activated Low-Temperature Synthesis of Ti2SnC Fabrication and Mechanical Properties of High-Pure Ti3SiC2 Bulk Materials Directly by Hot-Pressing its Powder Surface Coating of Anhydrite Powders with CaCO3 Nano-Particles Prepared in Ca(OH)2-H2O-CO2 System Tribochemical Effects of MoSi2 Powder in Ball Milling Preparation and Characterization of Ca0.8Sr0.2ZrO3 Powders Prepared by Soft Chemical Route Synthesis of Mixed Conducting Oxides SrFeCo0.5Oy Powder by Citrate Method A New Homogeneous Precipitation Route to Ammonium Aluminum Carbonate Hydroxide A Novel 3D Patterning Technique for Forming Advanced Ceramics Application of Acetate Starch to Colloidal In Situ Consolidation Molding Process of Alumina Ceramic Rheological Behavior of Alumina Aqueous Suspension for Extrusion Gelation Freeform Fabrication Rheological Properties of Boron Nitride-Silica Composite Suspensions Effect of Various Dispersants on the Gel-Casting of Silicon Nitride Effect of SiC Powder Characteristic on the Rheological Properties of Feedstock Simulation of Ceramic Injection Molding for Zirconia Optical Ferrule Superplastic Deformation of Nano-Sized α-Sialon Ceramics Forming of Large Thin Walled Fused Silica Shapes by Gelcasting Study on Processing Parameters of Ceramic Injection Moulding A New Dewaxing Method and its Effect on the Properties of Low-Pressure Injection Molded Ceramics Injection Molding of Zirconia Ceramics Using Water-Soluble Binder The Influences of Solid Loading and Molding Variables on Alumina Injection Molding On the Defects in Injection-Moulded Technical Ceramics Effects of Different Debinding Atmosphere on the Properties of Powder Injection Molded AlN Ceramics Near-Net Shaping of Microwave Ceramics by Gel-Casting with Carrageenan Extrusion Forming of Cordierite Honeycomb with Hexagonal Open Cells Preparation of PZT Slurry with High Solids Loading and Low Viscosity for Gelcasting Magnetic Alignments of Ba-Ferrite Particles in Suspension Synthesis of Fine Grain Ti3SiC2 by Spark Plasma Sintering with Additive of Aluminum Fabrication of TiAl Intermetallic by Spark Plasma Sintering Spark Plasma Sintering of CBN-WC-10Co Composites Preparation of Porous Alumina Ceramics by Spark Plasma Sintering Comparison of Spark Plasma Sintering and Hot Pressing of MgAlON Liquid Phase Sintering of α-Si3N4 by Spark Plasma Sintering Effect of Aluminum on Fabrication of Ti3SiC2 by Mechanical Alloying and Spark Plasma Sintering Liquid Phase Sintering Behavior of Amorphous Nano-Sized Silicon Nitride Powders Microwave Sintering of Alumina-Silicon Carbide Nanocomposites Fabrication and Characterization of Porous TiB2 Ceramic with Three-Dimensional Interconnected Skeleton Synthesis of a Novel B3CN3 Compound by Pyrolysis of Precursor The Effect of Diluent on Combustion Synthesis of Si3N4-SiC-TiN Ceramics with Small Diameter Preparation of Porous Si3N4 Based Ceramics by Combustion Synthesis Low Temperature Fabrication and Characterization of Porous SiC Ceramics Using Polycarbosilane as Binder Processing and Characterization of Carbothermal Reduction and Nitridation from Kaolinite-Polyacrylamide Intercalation Compound Fabrication of Reticulated Porous Ceramics with Controlled Structure by Centrifuging Process Preparation of Porous Ceramic Support with Inorganic Filtration Membrane Preparation of Porous Wollastonite Ceramics for Filtration Fabrication of Porous Silicon Nitride with High Porosity Properties and Application of Oriented Porous SiC as Transpiration Cooling Materials Fabrication of Porous Cellular SiC Ceramics from Wood by Embedding in Si/SiO2 Powder Mixture Study of Affecting Factors on Porosity in Gel-Casting Foam Preparation and Characterization of ZrO2 Microspheres by Internal Gelation Process Preparation and Microstructure of Bauxite Ceramic Microsphere Homogeneity of Aqueous Al2O3/3Y-TZP Feedstock by Plastic Kneading Effects of Adding Form of Additives on the Structure and Properties of High-Purity Alumina Ceramics Preparation and Properties of Al2O3-Mullite-SiC Nano-Composite by Slip Casting in a High Magnetic Field and Reaction Sintering Preparation of Zirconia-Toughened Alumina Ceramics through the Dispersal Basic Carbonate Precursors Structural Characterization, Crosslinking and Pyrolysis Investigation of Carbosilane Oligomers RB-SiC Ceramics Derived from the Phenol Resin Added with Starch TiC/Ti Composite Layers Fabricated by Laser Surface Alloying Fabrication of Lightweight SiC Space Mirror Advanced Engineering Ceramics for Semiconductor Package Technology Ultra-High Temperature Ceramics (UHTCs) via Reactive Sintering Effects of Rapid Heat Treatment on Microstructure and Mechanical Properties of Ti2AlC/TiAl Composite Microstructure and Properties of Carbon-Ceramic Composite Prepared by Hot-Pressing Sintering Microstructural Evolution and Mechanical Properties in Yb2O3–Fluxed Silicon Nitride Ceramics Processing and Properties of Highly Textured Si3N4 Materials A Comparison Study on Microstructure and Mechanical Properties of Si3N4 Ceramic Prepared from MACS Powders Microstructure of Different Rare-Earth-Doped α-Sialon Ceramics The Influence of Sintering Process on the Microstructure of Submicron Alumina Fabricated by Gelcasting Low Temperature Degradation of Yttria Stabilized Zirconia Effect of Al2O3 on the Phase Stability of Y-Ce-TZP/Al2O3 Composites at Low Temperature Microstructure and Phase Composition of (Ce, Mg)-PSZ Ceramics Microstructure and Mechanical Properties of Ce-Y-TZP Ceramic Composites for Ceramic Plunger and Ball Valve Effect of HIP on the Properties and Microstructure of Transparent Polycrystalline Spinel Processing of Zinc-Based MgAl2O4 Composite and Effect of Fly Ash Addition A Study on Toughening and Strengthening of Mg-Al Spinel Transparent Ceramics Study on the Properties of Alumina Ceramics after Implanted by Titanium Ions with MEVVA Sources Microstructures and Mechanical Properties of Nano-Composite Ti(C,N)-Based Cermets Preparation of Amorphous Si-B-C-N Powders and Nano-Sized Ceramics Synthesis and Properties of Ternary Carbide Ti3AlC2 Ceramics Preparation of ZnSe by CVD with the Solid Starting Materials Novel Visible-Band Transparent Ceramic Laser Material Mn:MgAl2O4 Synthesis, Characterization of Perhydropolysilazane and its Application in the Preparation of 3D SiO2f/Si 3N4 Composites Influence of Pressure on the Crystallization in SiO2f/SiO2 Composites Ablated Transformation and Dielectric of SiO2/SiO2 Nanocomposites Dipped with Silicon Resin Preparation and Property Study of 3D Cf/Si-Ti-C-O Composites Fabricated with Polytitanocarbosilane by PIP Process Mechanical Properties of C/SiC Composites via Precursor Pyrolysis with Pretreated Carbon Fiber Microstructure of Cf/SiC Composite with Precursor of Hexamethyldisilazane by Chemical Vapor Infiltration Processing and Properties of 2D Cf/Si-O-C Composites Using Silicone Resin Fabrication and Mechanical Properties of SiCf/SiC Composites via Polycarbosilane Pyrolysis Fabrication of SiC/SiC Composites Using both Chopped Fiber and a Hybrid Reinforcement of Chopped and Continuous Fibers Transient Liquid Phase Bonding of 2D Fiber Reinforced Carbon-Carbon Composites Effect of the Formation of SiC Whisker on the Properties of Al2O3-ZrO2-C Materials Dielectric and Mechanical Properties of Unidirectional SiC Fiber-Reinforced Aluminum Phosphates Composite Microstructure of Pyrolytic Carbon Matrix in Carbon/Carbon Composites after Graphitization Tensile Behavior of Aluminum Matrix Composites Reinforced by Aluminum Borate Whiskers and Magnetic Ceramic Particles CNTs/Si3N4 Composites Fabricated by Reaction Bonded Processing Phase Evolution of Aluminum-Chromium-Phosphate Binders during Heat-Treatment Effect of PCS Pyrolysis Process on C Fiber in Cf/SiC Composite Effect of Oxygen on the Mechanical Properties of Polymer-Derived Si-Al-C-O Fibers Effect of Heat Treatment on the Microstructure and Mechanical Properties of Cf/SiC Composites Silicon Carbide Whiskers Synthesized by Double-Heating Technique Composition, Structure and Properties of Low Oxygen Content SiC Fibers SAXS Characterization of Nanochannels in Polymer-Derived SiC Fibers Effect of Catalyst on the Preparation of Silicon Carbide Whiskers from Silica and Carbon Synthesis of the Fiber Coating by FP-CVI Process Microstructural Characterization of In Situ TiB Whiskers in Ti MMCs Fabricated by SPS Preparation and Morphology of Mullite Whiskers by Sol-Gel Method The Preparation of Fibrous MCM-41 Using Microwave Heating Influence of Fabricated Process on Mechanical Properties of Porous SiC-Particle/Si3N4 Composites Effect of Second Sintering on Intragranular Structure and Mechanical Properties of 10vol%Al2O3/3Y-TZP Composites Synthesis of Aluminum Titanate Solid Solution by Solid State Reaction of Fine Commercial Al2O3, TiO2 and MgO Powders Preparation of LiTaO3 Ceramic Powders Effect of Aluminium Sol on Microstructure and Properties of Corundum-Mullite Ceramic Fabrication of Al2O3-SiC-Mullite Composites from Fly Ash Preparation of TiB2 Nanoparticles Reinforced Cu-Matrix Composite by Direct Combustion Synthesis Preparation of Warm Compacted and Sintered WC/Carbon Steel Composite and its Wear-Resistance The Preparation and Properties of Si3N4-Filled Epoxy Resin Composites for Electronic Packaging Preparation and Properties of β-Si3N4/Epoxy Matrix Composite Manufacturing of Polymer Matrix Composite Material Using Marble Dust and Fly Ash Performance Analysis and Experimental Verification for FBG Sensors Applied for Smart Structure Multilayer SiC/Si Composites Derived from Papers An Investigation of the Reaction Hot-Pressing Synthesis of MoSi2/Ti3SiC2/Al Composites Reaction Path and Microstructures of Ti3SiC2/SiC Composite by Spark Plasma Sintering Interformational Exfoliation of Ti3Al2 Induced by Cu The Reaction between Ti3AlC2 and Cu in the Synthesis Process of Cu/Ti3AlC2 Composites High Performance Composite of Silicon Carbide/ Bismaleimide In Situ Formation of TiC Reinforced Intermetallic-Matrix Composite Layers Produced by Laser Cladding Effect of Ti3SiC2 Content on Mechanical Properties of Ti5Si3-TiC-Ti3SiC2 Composites Slip Casting of Green Compact of SiAlON Multiphase Ceramics from River Sand Steel-Bonded Cemented Carbide GT35 by In Situ Reduction of Natural Ilmenite Unusual Microstructures and Strength Characteristics of Cu/Ti3AlC2 Cermets Reaction Synthesis of TiAl-Al2O3 Composite Synthesis and Structure of Sol-Gel Derived PST/Bi2Ti2O7 Composite Thin Films Preparation and Characterization of Copper-Coated Alumina Powders Manufacture and Microstructures of Fe-Cr-C Hypereutectic In Situ Composites Microstructure and Mechanical Properties of Heat-Resistant Silicon Carbide Ceramics Defect and its Influence on Mechanical Property of Titanium Diboride-Copper Matrix Composite Mechanical Properties of Al2TiO5 Ceramics High Temperature Creep Strength of Si3N4-Y2Si2O7 Ceramics by Stress Relaxation Based on a New Interpretation Model Mechanical Properties and Microstructure of Al2O3-TiC Composite by Hot-Pressing Preparation and Properties of BN-SiO2 Composite Ceramics Spark Plasma Sintered ZrO2(Y2O3)-Al2O3-SrSO4 Self-Lubricating Nanocomposites for High Temperature Tribological Applications Effect of Y2O3 on Properties of Al/Ti3SiC2 Composite A New Ti3AlC2/Cu Cermet Exhibiting Excellent Tribological Properties Effect of Micro-Pores after Sintering on Wear Behavior of Zirconium Silicate Composite Microbeads Fabrication of TiC Particles Reinforced Hadfield Steel Matrix Composite and its Wear-Resistance Plating Copper on Al2O3 Powder in Ceramal A Study on the Grinding Performance of Y-TZP/Al2O3 Ceramics Precision Machining of Si3N4 Refrigerator Friction Couple Based on FEA Grinding of TZP/Al2O3 Composite with Vitrified CBN Wheels High Speed Lapping of SiC Ceramic Material with Fixed Abrasive Micro Groove Machining Characteristics of Si3N4-hBN Composites Wear Characteristics of Twist Drills in Machining Fluorophlogopite Surface Behaviors of ELID Ground Engineering Ceramics In-Process Electrolytic Dressing Lapping (IEDL) of Al2O3-BN Machinable Ceramics Fabrication of SiCN MEMS by UV Lithography of Polysilazane Thermodynamic Properties of Gangue Properties of Sol-Gel Bonding Castables Fabrication and Characterization of Mullite Whisker-Reinforced Porous Refractory Colloidal Processing of Alumina-Carbon Ceramic Refractories Densification of Unfired Alumina Refractories by the In Situ Spinel Formation during Application Preparation and High Temperature Performance of β-Sialon Bonded Corundum Multiphase Material Fabrication of Fe-Al Intermetallic/TiC-Al2O3 Ceramic Composites from Ilmenite by Reaction Sintering Preparation of Nanoporous Super Thermal Insulation Material Compounded with Xonotlite-SiO2-Aerogel and Characterization of the Pore Structure Synthesis and Properties of Silica Aerogel by Using Acid Silica Sol and TEOS as Silicon Sources Thermal Shock Resistance and Ablation Behavior of TiB2-Cu-Ni Composite via Combustion Synthesis A Novel Approach to Prepare Ni-Coated TiB2 Cermet Microstructure and Properties of (Ti,W)(C,N)/(Ni,Mo) Cermets after a Heat-Treatment at High Nitrogen Pressure Effect of Cr2C3 Addition on Microstructure and Mechanical Properties of Ti(CN)-Based Cermets Residual Stress Field of Ellipsoidal Ceramic Particles Ni-Base Alloy Composite Coating FEM Analysis on Thermal Stress of Desulphurization Injection Lance Investigation on the Porous Biomaterial for Bone Reconstruction with Addition of Bio-Mimetic Nano-Sized Inorganic Particles Inhibitory Effect of Synthetic Nano-Hydroxyapatite on Dental Caries Apatite Formation on the Surface of Dense HA/TCP in Animals' Serums In Vitro Degradation of β-TCP/PLLA Scaffolds with Different Proportions of β-TCP Application of Multilayer Collagen/HA Scaffold in Cartilage Tissue Engineering AFM Study on the Surface Dissolution of Hydroxyapatite Solution Behavior of CaO-MgO-SiO2 System Bio-Soluble Refractory Ceramic Fibers The Interface Reaction between an Ag+-Doped TiO2 Film and Stainless Steel Substrate Preparation of Antibacterial Ceramics with Silver-Carrying Nano-Hydroxyapatite Effect of Reaction Conditions on Pore Configuration and Mechanical Property for Porous Hydroxyapatite Prepared by Polymer Sponge Method Factors Affecting the Pore Size in Porous Hydroxyapatite Produced by Stir-Froth-Polymerization Method Biomimetic Fabrication and Characterization of BG/COL/HCA Scaffolds for Bone Tissue Engineering FCVA-Synthesized Tetrahedral Amorphous Carbon Films for Biomedical Applications A Study on Biomineralization Behavior of Silk Fibroin Film MicroCT Aided Scaffold Design and Preparation Mechanical Properties of Machinable Zirconia Dental Composites Microstructure and Crystallization Behavior of Glasses in the ZrO2-ZnO-Al2O3-SiO2 System Low-Temperature Sintering of 3Y-TZP/Glass Composites as All-Ceramic Dental Materials Structure and In Vitro Bioactivity of Si Enriched Hydroxyapatite/TiO2 Coatings on Pure Titanium by Micro-Arc Oxidation Microstructure Analysis of a Composite System Composed of Zirconia/Alumina Composites and Vita Alpha Coating-Glass for Dental Applications Effect of Surface Roughness on Matching Properties between Ceramic Framework and Coating-Glass for Dental Applications Effect of CNTs on Property of Calcium Phosphate Cement Preparation of Unsintering Calcium Phosphate Macroporous Materials with Hydroxyapatite Nanowhisker In Situ Growth Porous Hydroxyapatite Bioceramics Prepared by Polymeric Sponge Impregnation Process Self-Setting Biphase Porous Calcium Phosphate Cement Characterization of Porous Calcium Phosphate Bioceramics Modified by Porosifier Effects of Setting Liquid on α-Calcium Phosphate-Tetracalcium Phosphate Bone Cement In Vivo Behavior of Injectable Fast-Setting Calcium Phosphate Cement Improvement of Anti-Washout Performance of Calcium Phosphate Cement Using Modified Starch Electrochemically Assisted Co-Precipitation of Electrically Conducting Polymer with Calcium Phosphate Coatings on Ti Alloys Degradation Behavior of Calcium Sulfate/β-Tricalcium Phosphate Composites in Tris Exploring the Osteoinductivity of Calcium Phosphate Ceramics/PLA or Collagen Composites Preparation of β-TCP/HAP Composite Bioceramics Preparation and Characterization of Biodegradable β-TCP-Based Composite Microspheres as Bone Tissue Engineering Scaffolds Degradation Behavior of β-Ca3 (PO4)2/β-Ca2P2O7 Bioceramics Physicochemical and Mechanical Properties of Composite of Chitosan Microspheres/Calcium Phosphate Cement Rheological Properties of an Injectable Calcium Phosphate Bone Cement and their Relationship with the Phase Evolution Repairing the Dog's Femoral Defect with the Autologous Osteoblast Integrated the Nano-Calcium Phosphate/Zirconia Scaffold Bone Formation in Non-Osseous Tissues of Biphasic HA/β-TCP Bioceramics Sintered by Different Ways Hydroxyapatite Coatings Deposited on Titanium Substrate by Pulsed Laser Deposition Preparation of Bioactive β-Tricalcium Phosphate Scaffold with Bone-Like Structure TEM Analysis on Bio-Functional Gradient Hydroxyapatite/ZrO2 Coatings Improvement of Biocompatibility and Osteointegration of Zirconia Implants by Means of Bioactive Glass Coating: An Experimental Study in Animal Bioactive Ceramics - New Processing Technologies for Immobilization of Microorganisms for Filtration and Bioreactor Applications Preparation of Biphasic Calcium Phosphate Porous Ceramics Prepared from Fine Powders with Different Particle Size and its Dissolution Behavior in Simulated Body Fluid Apatite Forming on the Surface of Apatite-Wollastonite/β-Tricalcium Phosphate Bioactive Ceramic Simulation In Vitro of Subsonic Flame Sprayed Titanium/Biological Glass Composite Coating Biomimetic Synthesis of PEC-HA Composite Analogous to Bone Development of Ultrafine Fibrous Hydroxyapatite/Polymer Scaffold by Electrospinning Experimental Study of Biomimetic Mineralization on the Surface of Piezoelectric Pulp-Cap Film Bisphosphonate Pamidronate Modifying Hydroxyapatite Bioceramics for Hard Tissue Repair Microstructure and In Vitro Bioactivities of HA/Ti Composites Prepared by Hot Isostatic Pressing Improvement in the Sensitivity of the Response of Diamond Thin Films to X-Ray Microstructure of Ceramic Layer in Composite Pipe Made by SHS-Gravitational Process Microstructure and Properties of In Situ Synthesis of TiC Particle Reinforced Composite Coating by Induction Cladding Adhesion of Diamond Film to Co- Deficient Cemented Tungsten Carbide Substrate Wear Behavior of Plasma Sprayed Ni-WC Composite Coatings Microstructure and Dry Sliding Tribological Behavior of Microarc Oxidation Coating Formed on Ti6Al4V against Steel Preparation of DLC Scratch-Resistant Coating on PC Glass Lenses Micro-Tribological Behavior of Boron Carbide Self-Mated Pairs Frictional Performance of Brake Pads against Al Metal Matrix Composites with Different Sizes of SiC Particles Effects of Pre-Oxide Layer Thickness on Thermal Cyclic Behavior of Thermal Barrier Coatings Cyclic Oxidation Behavior of Thermal Barrier Coatings in Environments Containing Water Vapor Design and Properties of Fire-Proof Coating for Tunnels Influence of Infiltration Additives on the Phase, Microstructure and Oxidation Resistance of SiC Coating for Graphite Materials Thermal Cycling Behavior of Lanthanum-Cerium Oxide Thermal Barrier Coatings Prepared by Air Plasma Spraying A Promising Sm1.9Ca0.1Zr2O6.95 Ceramic for Thermal Barrier Coatings Low Thermal Conductivity Ceramics for Thermal Barrier Coatings Fabrication and Isothermal Oxidation Behavior of the Co-Deposited EB-PVD (NiAl + YSZ) Coating A Comparative Study of Two-Layer NiAl Bond Coat TBC and its Failure Mechanism Thermophysical Properties of Samarium-Cerium Oxide for Thermal Barrier Coatings Application A Comparison of the Surface Properties of DLC and Nanocrystalline Diamond Influence of Impurities on the High-Temperature Water-Vapour Corrosion of Environmental Barrier Rare-Earth Silicates Analysis of Heat Transfer and Thermal Stress in Thermal and Environmental Barrier Coatings Investigation of YSZ Thin Films on Silicon Wafer and NiO/YSZ Deposited by Ion Beam Sputtering Deposition (IBSD) Influence of Agglomerate Size on the Properties of Al2O3-Al2Cu3 Multiphase Ceramic Coatings Effect of Heat Treatment on Coloration of Ag Doped TiO2-SiO2 Films Photo-Hydrophilicity and Photo-Catalysis of TiO2-SiO2 Coating on Ceramics AFM Investigation of Nano Particle Incorporated Sb Doped SnO2 Films Development and Characterization of Nano-TiO2/HA Composite Bioceramic Coating on Titanium Surface Interface Biomechanical Properties between Femora and Bioactive Ceramic Coatings Prostheses during the Initial Implant Stage Two-Steps Digital Image Correlation and Application to Studies of Micromechanics Behavior of Coating Interface Adsorption of Human Serum Proteins on Carbonaceous Materials Thermal Shock Experiment and Simulation of Ceramic/Metal Gradient Thermal Barrier Coating Mechanisms and Kinetics of Silica-Rich Binary Na2O-SiO2 Glass Corrosion in 100°C Water at pH=7 Effect of Heat Treatment on the DC Conductivity and Activity Energy of Li2O-Fe2O3-P2O5 Glasses Crystallization of a SiO2-MgO-Al2O3-K2O-Fe2O3-F Glass Making Fluorophlogopite Ceramics through Ceramic Processing Preparation of Decorative Building Glass-Ceramics by Using Cracked-Glass Panel as Precursor Sintering and Crystallization of Glass-Ceramics for Optical Fiber Ferrule Manufacture Process of Light Calcium Carbonate from Limestone Upconversion Emission of Infrared Excited Er3+-Doped Transparent Glass Ceramics Containing CaF2 Nano-Crystals Structuration and Fabrication of Sensors Based on LTCC (Low Temperature Co-Fired Ceramic) Technology Fabrication of Ba-Ti-B-Si-O Glass-Ceramics for LTCC Crystallization of Cordierite-Based Glass-Ceramics Adding with Fe2O3-TiO2 The Influence of Li+ on the Sintering of Cordierite Glass Ceramic Composition and Properties of the LZS Glass-Ceramics Used as Anodic Bonding Material Preparation of SiO2-TiO2 Films of High Photo-Catalytic Activity in the Electric Field Heating-Treatment Sintering AlN Ceramics Below 1500°C with MgO-CaO-Al2O3-SiO2 Glass Addition Synthesis of Glass Ceramic from Goldmine Tailings Method for Estimating the Critical Cooling Rate for Glass Formation from Isothermal TTT Data Effect of Phenolic Resin on the Basic Properties of Woodceramics and Biomorphic SiC Ceramics Manufacturing Process of Activated Magnesia from Bittern and Dolomite Activated Alumina Adsorbent Developed from Waste Aluminum Sludge A New Method for Effective Utilization of Melted Solid Waste Development of Glass Ceramic by Sintering and Crystallization of Glass from Phosphorus Slag Sialite Technology and Cycle Economy Preparation and Characterization of Porous Cordierite Ceramics from Coal Fly Ash Photo-Catalytic Properties of Ceramic Coating of TiO2 Microporous Ceramics Made by Silicon Carbide Whiskers Clay Minerals as a Feasible Additive to Stabilize Cadmium in Contaminated Soils Preparation and Photocatalytic Performance of Ag-Doped Titanium Dioxide Whiskers A Novel Hydroxyapatite Carrier for Enrichment of Hydrocarbon Degradation Bacteria Practice of Simulation to Formation of Rock Theory Effect of Deposition Conditions on TiO2 Thin Film on Silica Glass Fibers by Liquid Phase Deposition Effects of Boron-Doped on Photocatalysis and Hydrophilicity of TiO2 Film Preparation of Sialon from Solid Wastes by Colloidal Process Oxidation Resistance of Mild Steels Coated with Ce4+-Modified TiO2 Nanofilms Hierarchically Nanostructured Porous Functional Ceramics Preparation and Photocatalytic Property of Platinum-Modified TiO2 Ceramic Film Using Different Compound Techniques Preparation and Photocatalytic Properties of Nanosized La3+ and Co2+ Co-Doped TiO2 by Microemulsions Preparation of Rare-Earth Element Doped Titanium Oxide Thin Films and Photocatalysis Properties Influence of La3+ Ions on the Photo-Catalytic Activity of TiO2 Films Prepared by Micro-Plasma Oxidation Method Dispersion and Electrophoretic Deposition of Titania Particles Photo-Catalytic Activity of Fe3+/Sn4+ Co-Doped Titanium Dioxide Nano-Crystalline Thin Films for Methyl Orange Degradation Preparation of TiO2/SiO2/(γ-Fe2O3-SiO2) Magnetic Photocatalyst Preparation of N-Doped TiO2 Photocatalytic Paint and its Sterilization Performance under Visible-Light Irradiation Factors Influencing the Photocatalytic Efficiency in the Experimental for the TiO2 Powder Slurry Systems Photocatalytic Degradation of Methylene Blue Aqueous Solution under Visible Light Irradiation by Using N-Doped Titanium Dioxide Growth of TiO2 Thin Film on Glass Substrate by Air-Opened MOCVD Preparation of WOx-TiO2 and the Photocatalytic Activity under Visible Irradiation Photocatalytic Degradation of Methyl Orange on ZnO in Aqueous Photocatalytic Properties of Nanocrystalline Tin Oxide Synthesized by Using Molten Boric Acid as a Flux Effects of Heat Treatment Temperature on the Photocatalytic Properties of TiO2 Prepared by Melt-Phase Separation Process Effect of CeO2 Supports on CO Oxidation Activity of Pd-Cu Catalyst Synthesis and Catalytic Activity Studies of V/K/Ca and V/Ks/Ce Based Catalysts for Diesel Soot Oxidation Preparation of Nanosized Ca-Zn Ferrite Particles by a Sol-Gel Method and its Magnetic Properties Synthesis of Bi4-xYbxTi3O12 Nanopowders by a Modified Sol-Gel Process Synthesis of Ce0.8Gd0.05Y0.15O1.9 Nanopowders Nano-Scaled Anatase Phase Titanium Oxide Converted from Ammonium Oxotrifluorotitanate Prepared by Aqueous Solution of Ammonium Hexafluorotitanate and Boric Acid Effect of Low Frequency and Power Ultrasonic Treatment on the Surface Adsorbed Organics and Visible Light Photocatalysis Activity of Nanosized TiO2 Photocatalyst Effect of Drying Methods on Photocatalytic Activity of Nanosized Titanium Dioxide Preparation of Nanosize Anatase TiO2 Powders by Hydrothermal Synthesis Synthesis of VO2 Nanocrystalline via Hydrothermal Method Synthesis of LaMnO3 via a Mechanochemical Activated Process Synthesis and Characterization of Regular Hexagonal NiCo2O4 Nanosheets Preparation and Characterization of CdSe Synthesized from Non-Aqueous Media Preparation and Characterization of CdSe Nanoparticles Prepared by Using Ultrasonic Irradiation Synthesis of Hollow Sphere CdSe from CdCl2 Aqueous Solution Containing Ethylenediamine Preparation and Characterization of Gallium-Doped Zinc Oxide Nanopowders with High Electrical Conductivity Preparation of Conductive Composite Particles by Impact Coating Process The Preparation of Alumina Nanopowders from Solution Derived Precipitates through Polymer Gel Method Preparation of Nanoscale High-Purity α-Alumina Powders Effect of Phase of YAG Powder Synthesized by Co-Precipitation on Transparent Ceramic Sintering A Novel Preparation Route of YAG:Ce via Polymer Gel Precursor A Novel Non-Aqueous Solvent Chemical Process to Synthesize Nano-ZrO2 Preparation of Pottery from Shale Effect of Novel Bivalent Mineralizers on the Synthesis of Nano-Sized Y2O3 Doped ZrO2 Powder by Hydrothermal Method Coloring Mechanism of Pr-CeO2 Nano-Crystalline Red Lanthanide Pigments Prepared by Low-Temperature Combustion Synthesis Preparation and Thermal Decomposition Mechanism of Zn2+-Doped Mg,Al-Hydrotalcite Nanocrystalline Photoluminescence and Structural Properties of Si Nanoparticles Embedded in SiO2 Matrix by Reactive RF Magnetron Sputtering Preparation and Synthetic Mechanism of Silicon Carbide Nanometer Whiskers Synthesizing Nano-Scale Titanium Nitride Powders by Solvothermal and Carbothermal Methods Preparation and Some Properties of Ni-TiN and Ni-TiC Nanocomposite Particles by DC Arc-Plasma Synthesis of WC Nanosized Powder by the Plasma Arc Discharge Process Preparation and Property of Self-Dispersed Nanometer γ-AlOOH Influence of Ultrasonic Irradiation Power on the Synthesis Kinetics of Nano-Hydroxyapatite Prepared by a Wet Chemical Process Effects of Acidic Amino Acids on Hydroxyapatite Morphology Surface Nano-Particle Coating of Fly Ash Microstructure and Mechanical Properties of Silica Xerogels Doped with SiC Whisker and Short Carbon Fiber Preparation of Nanocrystalline Nickel Powders by Chemical Reduction in Nonaqueous Media Preparation and Characterization of Nano-Sized Ni Powders inside a Nonionic Polymer Network Preparation of Nano-Ag Particles and Antibacterial Dope Loaded Silver Effect of Dispersant on the Particle Size Distribution of Cu Powders Prepared by Wet-Reduction Process Growth of Oxide Nanorod, Nanotube and Nanocable Arrays through Template-Based Sol Electrophoretic Deposition One-Dimensional Oxide Nanomaterials through Rheological Self-Assembling Synthesis and Electrochemical Properties of V2O5 Nanostructures Catalyst-Assisted Pyrolysis of Polymeric Precursors: A New Method to Synthesize Low-Dimensional Nanomaterials Corrosion Resistance Properties of Carbon Nanotube Reinforced Electroless Composite Coating Self-Assembled Monolayer of Silver Nanorods for Surface-Enhanced Raman Scattering Synthesis and Characterization of La2(MoO4)3 Microcrystals via Hydrothermal Microemulsion Synthesis of Yttrium Oxide Hydroxide Nitrate Nanorods by Hydrothermal Method Preparation of PPy Nanowires and its Amperometric Response to Nitrate Structural and Optical Properties of Lead Titanate Nanowires Synthesized by Hydrothermal Method SnO2 Nanowires with Branched Structures Synthesized by Thermal Evaporation of Sn Powders Synthesis of Sulfide Nanowire Arrays through Template-Assisted Electrodeposition Synthesis and Characterization of Boron Carbide Nanobelts Large-Scale Fabrication of ZnO Hexagonal Rods Arrays by a Simple Chemical Solution Method Luminescent Properties of Aluminum Doped Zinc Oxide Nanofibers Prepared by Electrospinning Influence of pH on the Morphology of Yttrium Oxide Hydroxide Nitrate Nanocrystal Fabrication of LaNiO3 Chain-Like Ceramics from Nanocable Precursors Preparation and Characterization of Cerium Hydrate Fiber Preparation of a Novel Carbon Nano-Material Studded Iron Granules from Needle Coke by Arc Method Synthesis and Characterization of Refluxed Sols and TiO2 Thin Films Using TiOSO4 Preparation of TiO2 Nanocrystalline Films by Electrophoretic Deposition and their Application in Dye-Sensitized Solar Cells Dye-Sensitized Nanocrystalline TiO2 Ceramic Film and its Photoelectricity Property In Situ Template Synthesis of TiO2 Nanotube Array Films Anticorrosion Behaviours of the TiO2 / WO3 Composite Photoelectrodes for 304 Stainless Steel Hydrothermal Conversion Deposition of ZnFe2O4 Doped TiO2 Thin Films and their Photovoltaic Response The Photo-Induced Cathodal Protection of 304SS with Graded Bandgap Ferrite/TiO2 Nanostructures Microstructure and Resistivity of Iridium Oxide Thin Films by Pulsed Laser Deposition Technique Effects of Nanosized Iron Oxide with Different Morphology on Nanomechanical Properties of Nanocomposite Coating Transparent and Compact Zinc Oxide Thin Films via Two-Step Electrodeposition from Aqueous Solution Microstructure and Mechanical Properties of Cr-C-N, Cr-Si-N and Cr-Si-C-N Coatings by a Hybrid Coating System Structure and Optical Properties of Si Films Deposited by Inductively Coupled Plasma CVD at Room Temperature Microstructure Control and Phase Structure Study of Porous Alumina Membrane Fabrication and Characterization of the Multilayer Film Containing Polyoxometalate with Pendant Support-Ligand Surface Morphology of Thin Film Deposited on Rotating Substrate by EB-PVD Nanocomposites – Toughened Ceramics Multifunctional BN/Si3N4 and TiN/Si3N4 Nanocomposites Prepared by In Situ Nitridation Method Microstructure and Mechanical Properties of SiC-Al2O3 Nanocomposite Prepared by Surface Modified SiC Nanopowders Preparation and Properties of Al2O3 Particle Dispersed 3Y-TZP Nanoceramics Doped with TiO2 Microstructures and Multi-Toughening of ZrO2 Nano-Micron Fibers Self-Toughening Al2O3 Ceramics from In Situ Growth in the Melts Produced by Combustion Synthesis Microstructures and Properties of Al2O3/ZrO2 Composite Ceramics from In Situ Growth in the Melts Produced by Combustion Synthesis From Kaolins (with Addition of Al2O3) to Mullite Composite Nanocrystals: Experiments and Analysis Spectroscopic Study of Rod-Like Mesoporous ZnO-SiO2 Composites Role of Amorphous Silicon Carbide in Microstructure and Mechanical Properties of nc-TiC/a-SiC Nanocomposite Coatings Prepared by PECVD Preparation and Characterization of CdSe/SiO2 Nanocomposites by Sol Gel Method and In Situ Growth Properties of Nano-Hybrid Sol-Gel Materials Synthesized from Colloidal Silica-Silane Containing Epoxy Silane Preparation and Structural Characterization of SiO2-ZrO2 Aerogels Synthesis and Structural Characterization of SiO2-Al2O3 Xerogels Influence of Binder Additives on the Sintering of Nano-3Y-TZP Sintering Behavior of Pure and Nb-Doped BaTiO3 Powder Prepared by High-Gravity Reactive Precipitation Preparation of MgAl2O4 Transparent Nano-Ceramics and their Light Transmission Properties Processing and Properties of Nanocrystalline Tetragonal Zirconia Analysis of the Surface Adsorbed Organics of Nanosized TiO2 Photocatalyst with High Visible-Light Photocatalysis Activity by Ultrasonic Treatment under Water and Ethanol Solution Low-Temperature Synthesis and Micro-Morphology Observation of Transparent MgAl2O4 Nano-Ceramics Evaluation of a Shoe Cushioning System Using Shock Absorber by Biomechanics Phase Transformation Behavior of ZrO2-TiO2 Thin Films in Electric Field Phase-Transformation Kinetics of TiO2 in TiO2/(O′+β′)-Sialon Multi-Phase Ceramics Effect of Er3+ Doping on Crystallization of PbF2-SiO2 Based Bulk Xerogels Phase Evolutions of High Energy Ball Milled Ni-66.7at% Si Thermal Expansion Behavior of Solid Solution Y1.9R0.1Mo4O15 (R = Sm, Nd, Dy) Thermal Expansion Coefficients of Sm2Zr2O7 Doped with MgO Improved Stability of Mn-Doped WO3 Varistor via Doping Cr2O3 Effect of the Addition of Ti3+ into TiO2 Film on the Performance of Dye Sensitized Solar Cells Reaction Process of Al-TiO2-C-Ti-Fe Multiphase System during Combustion Synthesis Sintering Behavior of Fe-Si Composite Powder by DPR Technique Reaction Process of Al2(1-x)MgxTi1+xO5 Composite Powder by Chemical Co-Precipitation and Subsequent Sintering Preparation and Investigation of TiO2 Sol Containing Nanometer Anatase Crystalline Grains Pressure Sensitivity of SiC/Cu Composites Prepared by SPS Sintering Kinetic of Fine α-Alumina Powder with ZrO2 Impurity On the Grain Size Distribution of MnO Doped ZnO Ceramics Effect of Sintering Process on Microstructure of Al2O3/LiTaO3 Composite Ceramics Kinetics Model for the Initial Stage of Spark Plasma Sintering Study on the Critical Time and Diffusion Coefficient in Grain-Boundary Segregation of Phosphorus Fabrication of Highly Microstructure Controlled Ceramics by Novel Colloidal Processing Shrinkages during from Liquid to Solid in Colloidal Forming Suspension Characteristics and Rheological Properties of Aqueous Alumina/Zirconia Freeze Casting Slurries The Stability of TZP-YSZ Binary Suspensions Silicon Nitride Ceramic Prepared by Colloidal Process Mechanical Properties of Filler Metal in Si3N4/Austenitic Stainless Steel/Si3N4 Joints as Measured by Nanoindentation and its Relationship to the Interfacial Strength Joining of SiC Ceramic by High Temperature Brazing Using Ni-Cr-SiC Powders as Filler Joining of SiC Ceramic by Hot Pressing Reaction Joining Process Using Ni-51Cr Powders as Filler Fractal Dimension of Al(OH)3 Particle and Fractal Simulation of Boundary Micro-Topography Evaluating Mechanical Properties of Ceramics by Relative Methods The Compressive Strength of Ceramic Microbeads Spherical Indentation on Glass-Coated Al2TiO5-Mullite Composites Indentation Fracture Toughness and Hardness of Solid Oxide Fuel Cell Electrolyte Material Description of the Nanoindentation Unloading Behavior of Brittle Ceramics with a Modified Surface Cyclic Fatigue of Alumina Ceramics as Evaluated by Modified Small Punch Tests Dynamic Fatigue of Y-TZP Ceramics at the Room Temperature Cracking Stress of Nano-Fibers Composite Ceramics Experimental Study of Micro Displacement Field of Microstate of Crack Tips of Ceramics Plasticized with Zirconia and Stabilized by Yttrium Oxide – Application of Digital Image Correlation Method Based on Analysis by Scanning Electron Microscope Lower and Upper Bounds of Mechanical and Thermal Properties of Ceramic/Metal Composites Fracture Enhancement of Mixed Mode I-II Transformation Toughened Ceramics Crack Healing, Reopening and Thermal Expansion Behavior of Al2TiO5 Ceramics at High Temperature Corrosion Resistance of the Ceramic Coating Formed by Micro-Plasma Arc Oxidation on AZ91D Alloy Influences of Duty Ratio on Structure and Corrosion Resistance of Ceramic Coatings on Ti-6Al-4V by Micro-Plasma Oxidation Preparation and Wet Erosive Wear Characteristics of Porous Al2O3 Ceramics Erosive Wear Performance and Mechanism of Engineering Ceramic Materials Erosion Wear Characteristics and Mechanism of Si3N4 Ceramics: Effect of Impact Angle Effect of Testing Parameters on Wear Properties of Alumina Strengthen 3Y-TZP Ceramics Dry Friction Behaviour of Reaction-Bonded Silicon Carbide at High Temperature Wear Mechanism of Ceramic Microbeads as Grinding Media Oxidation Behavior and Mechanical Property of Si3N4 Ceramics with Rare Earth Oxide Addition Influences of Calcination Ambiences on Phase Composition and High Temperature Oxidation Resistance Property of Ceramic Coatings on Ti–6Al–4V Alloy by Micro-Plasma Oxidation Geometric Design of Cycloidal Drives with Ceramic Ball Meshing Elements Design of Ceramic Composite Based on the Impact Resistance and its Machining Application Parallel Simulation of Ceramic Grain Growth on the Platform of MPI Quantitative Evaluation for New Bone Growth of Bone Repairing Biomaterial Based on Color Image Segmentation Application of Improved BP Neural Network in the Preparation Processing of the SrTiO3 Nanocrystalline Finite Element Method for Thermal Analysis and Ablative Calculation of Heat Protection Materials Lifetime Control and Prediction of ZrO2/CePO4 Composites First-Principles Study of Nonmetal-Doped Titanium Oxides First Principle Study on Electronic Structure of Nanocrystalline BaTiO3 Ceramics A Method to Evaluate the Elastic Properties of Ceramics-Enhanced Composites Undertaking Interfacial Delamination First-Principles Calculations on Crystal Structure and Thermodynamic Properties of Ceramics Adsorption of the Au Atom on Si(001) Surface Area-Perimeter Relation of the Grains in Stabilized Cubic Zirconia Effective Stiffness of Nano and Transformation Composite Ceramics Lambdoidal Layup of Aragonite Sheets in Conch Shell Serial Simulation of Ceramic Grain Growth Based on Ternary-Tree Structure and Space Partition Electronic Structure Study of Ni/Al2O3/Ni from First-Principles Assessment of the Surface Morphology of Diamond Film Based on Fractal Effects of Ceramic Fillers on Light Reflectance and Arc Resistance of PTFE for Circuit Breaker Preparation of Yellow Color Pearlescent Pigments of CeO2-Mica Study of Carbonizing Processes for Sintered Dolomite Preliminary Analysis of the Citations to Articles Published in Two Academic Journals Grain Characteristics of Nanocrystalline ZrO2 Powders Analysis of Capacity to Make Profits in Chinese Listed Ceramic Companies Structural Micro-Layered Ceramics with Surfaces under Tension and Compression with Increasing Apparent Fracture Toughness Research on Morphology and Phase Structure of Al/Cu Interfaces Formed by Explosive Cladding Fabrication of Layered Ti3SiC2/α-SiAlON Material Microstructure and Optical Characterization of Au/SiO2 Nano-Composite Multilayer Films ZrO2-Ni Functional Gradient Bonding Interlayer Microstructure and Mechanical Properties of Freeze Cast Alumina/Silicon Carbide Layered Composites Mechanical and Electrical Properties of Boron-Oxygen-Nitrogen Film as Buffer Layer Characteristics of Surfactant-Zirconium Phosphate Composites with Expanded Interlayer Separation Resistance of the Transitional Region of Laser-Clad Coating on Electrolytic Low Titanium Aluminium Alloys to Multiple Impact Loading Development of Functionally Structured Materials: Ceramic Photonic Crystals and Fractals Functionally Graded Thermoelectric Materials Microstructure and Properties of WCP Reinforced Ferrous Gradient Composites Functionally Graded Piezoelectric Ceramics for Ultrasonic Transducers Preparation of Functionally Graded Cu/AlN/Cu Electrode Materials for Thermoelectric Devices A New Silver-Based Graded Composite as Electrical Contact Material Bending Behavior of Functionally Graded Piezoelectric Laminated Actuators under Electric Fields Thermal Shock Behavior of Nano-Structured Functionally Graded Thermal Barrier Coatings Deposited by Supersonic Plasma Spray Numerical Simulation Method of Heat-Resistant Hetergeneous Graded Ceramics Structure on Vehicle Experimental Study and Modeling of a Differential SMA Spring Actuator Microstructure and Dielectric Properties of LiTiNiO Thin Films Effect of Ti Content on Microstructure and Dielectric Properties of Li and Ti Co-Doped NiO Thin Films Fabrication and Characterization of Ceramic/Metal Gradient Thermal Barrier Coating Microstructure and Corrosion Behaviour of Ni/Al-Al2O3 Gradient Ceramic Coatings on Q235 Steel Macro-Residual Stress in 304 Stainless Steel Coated with ZrO2-CeO2 Thin Films by Sol-Gel Process XPS Studies on Composite ZrO2-CeO2 Thin Films Deposited on Metal Substrate by Sol-Gel Preparation of Copper Particles Coated with Amorphous Titania Interfacial Cracks Control of Y-TZP/Stainless Steel FGM Fabricated by Slip Casting Surface Aluminizing and Internal Oxidation of Cu-Al-Y Alloy


Best Sellers


Product Details
  • ISBN-13: 9780878494101
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 2800
  • Series Title: Volumes 336-338 Key Engineering Materials
  • Weight: 6000 gr
  • ISBN-10: 0878494103
  • Publisher Date: 06 Apr 2007
  • Binding: Paperback
  • Language: English
  • No of Pages: 2800
  • Spine Width: 140 mm
  • Width: 170 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
High-Performance Ceramics IV: (Volumes 336-338 Key Engineering Materials)
Trans Tech Publications Ltd -
High-Performance Ceramics IV: (Volumes 336-338 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

High-Performance Ceramics IV: (Volumes 336-338 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!
    Hello, User