Buy High-Performance Ceramics VI by Wei Pan at Bookstore UAE
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > High-Performance Ceramics VI: (Volumes 434-435 Key Engineering Materials)
High-Performance Ceramics VI: (Volumes 434-435 Key Engineering Materials)

High-Performance Ceramics VI: (Volumes 434-435 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This special volume presents the latest advances in the science and technology of high-performance ceramics. More than 600 excellent contributions were further refined, using a strict peer-review process, to give the more than 243 manuscripts included in this collection. The contributions cover almost all aspects of the field including: functional ceramics, structural ceramics, processing of ceramics, and the evaluation of ceramics. The volume will therefore be of great interest to any scientist or engineer working in the field of high-performance ceramics.

Table of Contents:
Preface and Sponsors Current Status of Oxide Fibre-Reinforced Oxide Ceramic Matrix Composites for Gas Turbine Applications Fabrication of Textured β-Si3N4 and β-Sialon by Slip Casting in a Strong Magnetic Field and Reaction-Sintering Large Bulk Al2O3/ZrO2 (Y2O3) Nanocrystalline Composites Prepared by Combustion Synthesis under High Gravity Ultra-High-Hard Composites of TiC-TiB2 Prepared by Combustion Synthesis under High Gravity A Study on the Porous Microstructure of Yakbone Bioceramic Effect of Microstructure on Removal Mechanism of Solid State Sintered Silicon Carbide in Polishing Procedure Densification and Mechanical Properties of B4C Based Composites Sintered by Reaction Hot-Pressing Mechanical and Tribological Properties of 3D Carbon Fiber Reinforced SiC Composites Prepared by Liquid Silicon Infiltration Structure and Performance of Self-Reactive Spray Formed Ti(C,N)-TiB2 Multi-Phased Ceramic Materials Microstructure and Performance of the Hot-Pressed Silicon Nitride Ceramics with Lu2O3 Additives Effects of CeO2 on the Mechanical Property and Microstructure of 3Y-TZP Nanocomposite Ceramic Die Material Microstructure and Mechanical Property of Three-Dimensional Needled C/SiC Composites Prepared by Precursor Pyrolysis Property and Microstructure of CNTs/AlN Ceramics Microstructures and Mechanical Properties of B4C-TiB2 Composite Prepared by Hot Pressure Sintering Effects of Adding SiC Powder on the Properties of Carbon Fiber Reinforced Si-O-C Composites Fabricated via Precursor Pyrolysis Damage Detection in Fibre Reinforced Ceramic and Metal Matrix Composites by Acoustic Emission Defects Analysis of Large Size Silicon Nitride Balls Sintered by Gas Pressure Sintering Effects of SiO2 and Fe2O3 on Morphological of Mullite Preparation and Characterization of Fe/SiC Ceramic-Metal Composites Comprehensive Evaluation of Machinabilities of Dental Ceramics Mechanical Property and Ballistic Performance of Silicon Carbide Effect of Ball Milling on Microstructure and Flexural Strength of Ti(C,N)-Ni Cermets Preparation of Porous SiO2 Ceramics by Gelcasting Preparation of Porous Mullite Ceramics by Fly Ash/Al Compositions Preparation of Mullite by Coating Al(OH)3 on the Surface of Fly Ash Preparation of Complicated SiC Green Bodies via Aqueous Slip Casting Influence of Calcination Time on Pozzolanic Activity of Metakaoline Base on a Novel Evaluation Method The Microstructure and Tribological Properties of Carbon Fibre Reinforced Carbon/SiC Dual Matrix Composites Synthesis and Properties of Al4SiC4 by Carbothermal Reduction Preparation of Cf/SiC Composites by Liquid Silicon Infiltration Si3N4/BN Composite Ceramics with Nd2O3-Al2O3-Y2O3 Ternary Additives by Pressureless Sintering Oxidation Resistance Behave of Stainless Steel /TiC Nano Powders Impact Properties of TiC/Fe at Elevated Temperatures Oxidation Behavior of TiC/ Fe Ceramics Produced by Self-Propagating High-Temperature Synthesis Wear Resistance of TiC Ceramic Particulate-Reinforced Metal Matrix Cermets Thermal Conductivities of LaPO4/Al2O3 Composites Fabricated by SPS Preparation and Antibacterial Effect of Silver-Carrying Nano-Hydroxyapatite Powder Thermal Shock Behavior of Nd-Doped α-Sialon Ceramics Effect of Silica Coating on the Thermal Stability of Tantalum Based Nitrides Pigments Influences of SrSO4 and Ag on High Temperature Tribological Properties of Spark-Plasma-Sintered ZrO2(Y2O3)-Al2O3 Composites Liquid Oxide Flow during Oxidation of Zirconium Diboride-Silicon Carbide Ultra High Temperature Ceramics Nonlinear Elastic Deformation of MAX Phases Finite Element Analysis on Temperature-Stress of Permeable Refractory Ceramic under Working Process in Ladle Convective Heat Transfer Steady Thermal Stress in a ZrO2/FGM/Ti-6Al-4V Composite ECBF Plate with Temperature-Dependent Material Properties Processing and Characterization of Nano Silicon Carbide Ceramics via Precursor Pyrolysis Synthesis, Microstructure and Mechanical Properties of ZrB2 Ceramic Prepared by Mechanical Alloying and Spark Plasma Sintering Detection of Amorphous Silica in Air-Oxidized Ti3SiC2 at 500–1000°C by NMR and SIMS Microstructure and Mechanical Properties of Hot Pressed ZrC-SiC-ZrB2 Composites Electronic Structures and Chemical Bonding of the Layered Tungsten Borides: An Ab Initio Calculation Hot-Pressed TiB2 Ceramics with B4C and C Additives Effects of Carbon Black on Microstructure and Mechanical Properties of Hot Pressed ZrB2-SiC Ceramics Influence of Hot Pressing Temperature and SiC Content on the Microstructure and Mechanical Properties of ZrB2-SiC Pressureless Sintering of ZrB2-SiC Ceramics Incorporating Sol-Gel Synthesized Ultra-Fine Ceramic Powders Joining of Advanced Ceramics, Glasses and Composites at Politecnico di Torino, Italy Reaction Layer Microstructure of SiC/SiC Joints Brazed by Ag-Cu-Ti Filler Metal Estimating Energy Dissipation of Ceramics via H-E Ratio Comparison and Relative Error of Elastic Modulus in Glass Measured by Three Test Techniques Synthesis and Luminescent Properties of Mn2+-Doped Zinc Silicate Phosphors by Sol-Gel Method Microwave Dielectric Properties of RENbO4 (RE=Y, Yb,Ce) Ceramics Preparation of ZnNb2O6 Nano-Powders by Pechini Method Low-Temperature Firing and Microwave Dielectric Properties of Zn3Nb2O8 Ceramics with CuO-V2O5-Bi2O3 Microstructure and Leakage Current Characteristics of ZrTiO4 Thin Films by Sol-Gel Method Preparation and Microwave-Absorption Property of SiO2-SiC-Based Composites Microstructures and Microwave Properties of CaTiO3 Doped (ZnMg)TiO3 Dielectrics with CaO-B2O3-SiO2 Addition Magnetic Properties of Manganese-Titanium Substituted Barium Ferrite Ba(TiMn)xFe12-2xO19(x=0.0, 0.5, 1.0, 1.5, 2.0) Prepared by the Molten Salt Method Characterization of Microwave Ceramics with Low Permittivity and High Quality Factors Fabrication of Barium Titanate Inverse Opals by Sol-Gel Electrophoretic Deposition Process Dielectric Properties of CaCu3Ti4O12 Ceramics Sol-Gel Process for the Synthesis of Single-Phased BaTi2O5 Powder Develop Single-Phase High Dielectric Constant SiO2-Based Composite Gate Dielectric The Influence of Annealing Temperature on the Characteristics of 0.95 (Na0.5Bi0.5)TiO3-0.05 BaTiO3 Thin Films The Influence of Oxygen Plasma Treatment on the Electrical Properties of (Ba0.7Sr0.3)(Ti0.9Zr0.1)O3 Thin Films The Electrical and Physical Properties of (Ba0.7Sr0.3)(Ti0.9Zr0.1)O3 Thin Films under Conventional Annealing Process Fabrication and Characterization of Sr0.7Ca0.3TiO3 Substrates Using Aqueous Tape Casting Process Dielectric Properties of BiFeO3 Ceramics with Equal and Unequal Substitutions of Ti for Fe Ferroelectric Properties and Microstructures of Pr6O11-Doped Bi4Ti3O12 Thin Films Dielectric Characteristics of the Lead-Free Piezoelectric Ceramics K0.50Na0.50Nb0.95Ta0.05O3 The Influence of Annealing Treatment on Physics and Electrical Characteristics of Ba(Zr0.1Ti0.9)O3 Ferroelectric Films on ITO/Glass Substrate Extrinsic Scaling Effects on the Dielectric Response of Grained BaTiO3 Films Bi4Ti3O12 and Bi3.25La0.75Ti3O12 Thin Films Prepared by RF Magnetron Sputtering Effect of Cooling Rate on the Properties of the Grain Boundary of CaCu3Ti4O12 Ceramic Memory Properties of SrBi2Ta2O9/ Ba(Zr0.1Ti0.9)O3 Thin Films Prepared on Si Substrate Structural and Dielectrics Properties of (1-x)Pb(Fe2/3W1/3)O3-xPbTiO3 Ceramics Hydrothermal Synthesis of Nano-Structured Barium Titanate from Metatitanic Acid Preparation of BiFeO3 Nanopowders Using Acetylacetone as Stabilizer Microstructure and Electrical Properties of Bi3+ Modified ZnO Ceramics Low Sintering of the Temperature-Stable Dielectric Ceramics Based on Barium Titanate in Reducing Atmosphere Synthesis of BaTiO3 Nanorods at Room Temperature and Normal Pressure Preparation and Characteristics of BiFeO3 Ceramics Doped by MnO2 and Co2O3 Effect of Gel-Calcination on Piezoelectric Property in (1-x)BiScO3-xPbTiO3Ferroelectrics Effects of Co2O3 on the Piezoelectric Properties of Na0.5Bi0.5TiO3 Lead-Free Piezoelectric Ceramics The Left-Handed Properties of the Composite Medium Composed of Ferrite Cubes’ Array and Copper Net Effect of Specific Surface Area on Growth and Porosity of Oxide Superconducting Ceramic YBCO Single Domain Comparative Study on Ni-Zn Ferrites by One-Step Synthesis and Conventional Two-Step Synthesis Synthesis of Magnetic Nano-Composite by Partial Reduction of Barium Hexaferrite via High-Energy Ball Milling Low Temperature Sintering of Ferro-Materials with Both Capacitance and Inductance Properties Co2Z, Co2Y and CoM-Type Hexagonal Ferrites for Multilayer Inductors Glass Binder in Thick Film Metallization Paste for AlN Microwave Assisted Deposit Oxide Ceramic Coating onto Metal Dielectric and Sintering Properties of the Doping CaO-B2O3-SiO2 System Low Temperature Co-Fired Ceramics Control of the Shrinkage during Hybrid Microwave Sintering of Nano-Sized ZnO Based Powder for Varistors Admittance Spectroscopy of Y2O3-Doped ZnO Varistors Sintered at Different Temperature Origin of Leakage Currents in ZnO Based Varistor Ceramics with Al(NO3)3 Dopant ZnO-Pr6O11-Co3O4-TiO2-Based Ceramic Varistor Materials Rapid Synthesis of Bi Substituted Ca3Co4O9 by a Polyacrylamide Gel Method and its High-Temperature Thermoelectric Power Factor Effects of pH Value on the Structures and Optical Properties of Bi2S3 Thin Films Synthesis and Thermoelectric Properties of Ca2Co2O5 Ceramics Preparation and Thermoelectric Properties of LaCoO3 Ceramics Effect of Mn2O3 Addition on the Electric and Physical Properties of Lead-Free 0.98(Na0.5Bi0.5)TiO3-0.02 Ba(Sn0.08Ti0.92)O3 Piezoelectric Ceramics Effect of Bi2O3 Addition on the Electrical and Physical Properties of Lead-Free 0.98(Na0.5K0.5)NbO3-0.02 Ba(Zr0.04Ti0.96)O3 Piezoelectric Ceramics Influence of Processing Factors on the Phases and Morphologies of ZnS Optical Thin Films Reversible Surface Wettability Conversion of ZnO Film Preparation and Dielectric Properties of Oriented PZT Thin Films by LB Technique Analysis and Test of An Optical Scanner Actuated by PZT Films Enhanced Brightness and Efficiency in Single-Layer White Polymer Light-Emitting Diodes (PLEDs) Synthesis of the Gold Nanocubes by Electrochemical Method with Surfactant Solution and Acetone Solvent Addition Improvement Luminance of Flexible Organic Light-Emitting Diode (FOLED) by Alignment Thickness Rate Preparation of La1-xCexNiO3 (x= 0 ~ 0.4) Perovskite-Type Oxide by Sol-Gel Using Polyvinyl Alcohol Zinc-Doped TiO2 Nanotube Arrays First Principle Study of the Electronic Structure of Gd2SrAl2O7 Preparation and Characterization of Unique Foamy Zirconia Single Crystals via Sol-Gel-Hydrothermal Method Fabrication of Self-Healing Ceramic Coatings Against Oxidation for Carbon/Carbon Composites Using Polysilazane and B4C Filler Preparation and Thermal Conductivity of Hf6Ta2O17 Ceramic Improving Ag-DLC Film Adherence on High-Speed Steel by Varying Ag Contents in A Mid-Frequency Dual-Magnetron Sputtering Microstructure and Mechanical Properties of TiN/NbN Multilayered Coating Preparation and Oxidation Resistance of the Borate Glass Coating on Graphite Anode Tribological Behaviors of W-Doped DLC Films W-Doped DLC Films by IBD and MS Titanium Nitride Coatings on Ti Alloys by PIRAC for Orthopedic Implants In Situ-Fabrication of TiCN Ceramic Coating on Titanium Alloy by Laser Cladding Technology Influence of Electrophoretic Deposition Voltage on the Phase, Microstructure and Property of a Nano-SiC Coating Deposition Kinetics of the Cristobalite Aluminum Phosphate Coating on SiC Coated Carbon/Carbon Composites Prepared by Hydrothermal Electrophoretic Technique Fabrication of Superhydrophobic Surfaces of Titanium Dioxide and Nickel through Electrochemical Deposition on Stainless Steel Substrate Characterization of Silicon Carbide Grown on RB-SiC by Chemical Vapor Deposition Preparation of Hydroxyapatite/Chitosan Biological Coatings on Carbon/Carbon Composites Influence of Annealing Temperatures on the Properties of Dual-Layer W-TiO2 Thin Films Characteristic of Palladium Coated Tubular Alumina Composite Membrane for Hydrogen Separation A Study of Different Sintering Routes on Properties of Ni-Al2O3 Hydrogen Separation Membrane Preparation and Characterization of Different Composition Mg-Cu Tapes Preparation of Electroless Ni-Mo Coated TiC Powder Reaction Synthesis of TiC-Ni Composite Coating on Copper Substrate Using Electro-Thermal Explosion Ultra-High Speed Spraying Evaluating Absolute Hardness of Ceramic Coatings Using Relative Method Fabrication of Superhydrophobic Surfaces on Al Substrates for Anti-Adhesion and Self-Cleaning Applications Superoleophobic and Superhydrophobic Surfaces from Microtextured ZnO-Based Surfaces on Si Substrate The Study of Nanostructured Interfacial Coatings on SiC Fibers by Atomic Force Microscopy Synthesis of TiO2/Muti-Walled Carbon Nanotubes Composite Influence of the Processing Parameters on the Coating Hardness on LD10 A-Alloy Synthesis and Characterterization of Flower-Like NiO Nano-Architectures by Homogeneous Precipitation Evaluation of Hardness, Local Strength and Contact Fatigue of Brittle Ceramic Coatings at High Temperatures by Hertz Indentation Preparation of Compositionally Graded CVD SiC Oxidation-Resistant Coating Structure and Morphology of Sol-Gel Nanocrystalline TiO2 Films Coated on Glass Substrates Influence of Liquid Evaporation on the Components of SiC High Emissivity Coating Phase Evolution and Microstructure Characteristics of Calcium Phosphate Based Glass Ceramics Prepared by Sol-Gel Technique Deposition of Bioactive Titania Layers on Non-Metallic Substrates under Ambient Conditions due to Hydrolysis of Titanium Oxysulfate Solution UV-Enhanced Bioactivity of PS/TiO2 Coating Prepared by Layer-by-Layer Self-Assembly Method The Color of Fe2O3 and Bi2O3 Pigmented Dental Zirconia Ceramic Effect of Ceria Additive on Microstructure and Properties of Laser-Cladded Bioceramic Coating Preparation and Properties of Injectable Hydroxyapatite for Bone Repair Materials Microstructure and Mechanical Property of Zirconia Nanocomposites Controlled Growth and Self-Assembly of CaCO3 Superstructures between the Organic-Water Interfaces Mechanical Characterizations of Saxidomus purpuratus Shells Mineralization of Bone-Like Apatite in Chitosan Hydrogel Comparative Study of Biomorphic Silicon/Silicon Carbide Ceramic from Birch and Compressed Birch In Vivo Study of Carbon Artificial Femoral Head Preparation of Porous HAW/ß-TCP Ceramics with In Situ Synthesis of HA Whiskers Porous β-Tricalcium Phosphate Composite Scaffold Reinforced by K2HPO4 and Gelatin In-Situ Templating Synthesis of Thermally Stable Hydroxyapatite with Ordered Nanostructures Preparation of Carbon Fiber Reinforced Si-HA Bone Cements Composites Develop an Implantable CPW-Fed Antenna on the MgTa1.5Nb0.5O6 Ceramic Substrate Ceramic Coatings of Magnesium Alloy for Biomaterial Applications DSCs Modules Fabricated by Screen Printing Application of Vertically Oriented TiO2 Nanotube Arrays on Dye Sensitized Solar Cells Characteristic of Al-Doped ZnO Nanorods by a Hydrothermal Process Development of Transparent MgAl2O4 Spinel Ceramics Influence of Deposition Parameters on the Characteristics of AZOY Transparent Conducting Oxide Thin Film Effects of Vacuum Heat Treatment of Nano Powder on Sintering of Transparent Nano-Crystalline MgAl2O4 Ceramics Preparation and Properties of Translucent Y-α-Sialon Ceramics by Two-Steps Hot Pressing Fabrication and Optical Properties of Cr3+:YSAG Transparent Ceramics Large Scale Translucent Y-α-Sialon Ceramics Prepared by Two-Steps Hot Pressing Frequency Dependence of AC Conductivity in Iron Phosphate Glasses Effects of the Starting Powders on Microstructure and Properties of Porous Silica Ceramics Preparation and Grain Growth of Pb(Zr0.95Ti0.05)O3 Porous Ceramics Prepared by One-Step Pyrolysis Process Using Non-Aqueous Pechini Method Preparation of Porous Mullite Ceramics Using Al as Foaming Agent Preparation and Properties of Porous Diamond Preforms Effects of Infrared Scattering Powders on the Thermal Properties of Porous SiO2 Insulation Material Mechanical Behaviors of Foam Nickel Ceramic Effect of Hexagonal BN on the Microstructure and Mechanical Properties of Pressureless Sintered Porous Si3N4 Ceramics Dielectric Properties of Porous Si3N4 Ceramics Prepared by In Situ Cordierite Bonding Fabrication and Characterizations of YSZ Electrolyte Films for SOFC Influence of Thickness on Oxide Ionic Conductivity in Sm3+ and Nd3+ Co-Doped CeO2 Electrolyte A Facile Template-Free Synthesis of Praseodymium-Doped Ceria Nanorods Preparation of GDC Nanopowders and GDC/YSZ Core-Shell Nanocomposites Zircontes/Sulfates Composites: Perfect Combination of High- and Low-Temperature Protonic Conductors Synthesis and Impedance Spectroscopy of Ga-Doped La9.33(SiO4)6O2 Apatite Oxide Ion Conductor Preparation and Electrochemical Performance of Hydrogen Electrode and Electrolyte for SOEC by Tape Casting and Lamination Ni/SDC Materials for Solid Oxide Fuel Cell Anode Applications by the Glycine-Nitrate Method Fabrication of YSZ Film by Aqueous Tape Casting Using PVA-B1070 Cobinder for IT-SOFC W Gradedly-Doped Diamond-Like Carbon Thin Films Effect of Al2O3 Xerogel on the Microstructure and the Properties of Laser Cladding Coating of Fe-Based Alloy Resonance Properties of a Functionally Gradient Piezoelectric Actuator Based on PNN-PZ-PT Ceramics Novel Fabrication Method of FGM Containing Nano-Particles - Centrifugal Mixed-Powder Method - Fabrication of Tailored Powder Structures by Electrophoretic Deposition and Sintering Single Walled Carbon Nanotubes (SWCNTs) Assembled Site-Selectively on Flexible Substrate Preparation of Si3N4-Al2O3 Functional Gradient Joining Material Using Transient β-Sialon Interlayer Fabrication of MoSi2 Nanocrystal by Mechanical Alloying Large Particle-Sized Starting Powders Working Principle and Design of a Cylindrical Standing Wave Ultrasonic Motor Using Cantilever Type Bending Transducer Actuating Mechanism and Design of a Double Driving Feet Linear Ultrasonic Motor Using Longitudinal Vibration Transducer Dependence of Particle Parameters in Flight and Coating Character on Power of the Electric Supply at Plasma Spraying of TiO2 Fabrication of High Thermal Conductivity β-Si3N4 Ceramics at Relatively Low Temperature Using MgSiN2 as Additives Preparation of Xonotlite Whiskers from Carbide Slag Preparation of Zinc Oxide Whisker on Carbon Fibers Comparative Analysis of Adding Hydrogen Peroxide or Ethanol in Preparation of Zirconia Nano-Powder by Coprecipitation Methods Microwave Absorption Properties of Nano-Iron Epoxy Resin-Based Composite Material Synthesis of Fe-Core/Au-Shell Nanoparticles under Ambient Pressure First-Principles Study on the Three-Dimensional Structure of Graphane Luminescent Properties of Eu3+-Doped HfO2 Powders Prepared by Combustion Finite Element Modeling of Temperature Distribution in Spark Plasma Sintering A Novel Technique of Flyash Utilization: Preparation of Silica from Flyash by Alkali Leaching Morphology Control of Si-Based Nanostructures by Catalyst-Assisted Pyrolysis of Preceramic Precursors Analysis of Profitability in Chinese Listed Ceramic Companies Environmental Pollution and Pollution Control in Chinese Ceramic Industry Preparation of Ni – MgO– La2O3 Catalyst on Alumina Support for Catalytic Tar Cracking Process Properties of Nanosize Aluminum Nitride Powders Synthesized by Chemical Vapor Synthesis Properties of AlN Powder Synthesized by Self-Propagating High Temperature Synthesis Process Properties of Silica Ceramic Made from Amorphous Silica Redesign and Optimization for Ceramic Injection Mould of ZrO2 Fiber Ferrule Growth Mechanism and Optical Property of a Novel ZnO Mesoscale Superstructure Crystallization Behavior of Mg-Doped Titania Preparation and Characterization of Monodisperse Ceria Microspheres Machining Behavior of Green RBSC Body Prepared by Gel-Casting Phase Relationships of Al2O3-ZrO2-SiO2 System with Microwave Heating Unusual Reuniting of Barium Titanate Nanoparticles A Polymer Complexing Route for Low Temperature Synthesis of Perovskite Lanthanum Aluminate Powder Combustion Synthesis of Nanocrystalline Al2O3 Powders Using Urea as Fuel: Influence of Different Combustion Aids


Best Sellers


Product Details
  • ISBN-13: 9780878492749
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 930
  • Spine Width: 47 mm
  • Width: 170 mm
  • ISBN-10: 0878492747
  • Publisher Date: 01 Jul 2010
  • Binding: Paperback
  • Language: English
  • Series Title: Volumes 434-435 Key Engineering Materials
  • Weight: 1800 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
High-Performance Ceramics VI: (Volumes 434-435 Key Engineering Materials)
Trans Tech Publications Ltd -
High-Performance Ceramics VI: (Volumes 434-435 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

High-Performance Ceramics VI: (Volumes 434-435 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!