Buy High-Performance Ceramics X by Wei Pan at Bookstore UAE
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > High-Performance Ceramics X: (Volume 281 Solid State Phenomena)
High-Performance Ceramics X: (Volume 281 Solid State Phenomena)

High-Performance Ceramics X: (Volume 281 Solid State Phenomena)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This book contains the papers presented at the Tenth International Conference on High-Performance Ceramics (CICC-10), which was held from November 4 to 7, 2017, in Nanchang, China. The Collection covers most aspects in the field of high-performance ceramics (advanced ceramics), including processing, microstructures, and properties of structural and functional ceramics. Especially, the papers gave an overview of the most recent development in high-performance ceramics in China.

Table of Contents:
Preface Chapter 1: Powder Synthesis and Characterization Influence of Sulfate Ion on Phase and Dispersion of Y3Al5O12 Nanopowders with the Co-Crystallization Method Effect of Ammonia on CeO2 Microspheres Prepared by Internal Gelation Process Research on the Densification Process of the Mechanically-Alloyed Amorphous 2Si-B-3C-N Powder Preparation and Characterization of SiC Nanoparticles for ATF-FCM Fabrication and Characterization of Li4SiO4 Ceramic Pebbles Doped with Y2O3 and Nb2O5 Oxidation Behavior of β-Sialon Ultrafine Powders Prepared by the Combined Sol-Gel and Microwave Carbothermal Reduction Nitridation Method Effect of the Synthesis Method on the Properties of Ultrafine YAG Powder Effect of Synthetic Technology on the Properties of Co2O3 Powder Preparation of Zirconium Sol by Precipitation Method Preparation of Al2O3-SiC Composite Powder by Carbothermal Reduction of Coal Gangue and its Influence on Properties of Blast Furnace Stemming Preparation of Spherical Silica with Controllable Size Fabricating Uniform Tetragonal Barium Titanate Nanocrystals via Sand Milling Assisted by an Innovative Two-Step Calcination The Microstructure and Growth Behavior of Bi2Fe4O9 Superfine Particles Synthesized by Hydrothermal Method Preparation of β"-Alumina with η Type Nanometer Alumina Powder via Solid Phase Synthesis Chapter 2: Oxide Ceramics and Composites for Structural Applications The Effect of Dispersion Method on the Mechanical Properties of Graphene Reinforced Alumina Composites Effect of WO3 on the Performances of Cordierite Ceramics Synthesized by Using Kyanite as Raw Materials Improvement of Thermal Stability of ZrO2-SiO2 Aerogel Modified by Ca(II) Cations The In Situ Preparation of MgAl2O4/YAG Eutectic Composites by Reaction Sintering Using Induction Heating Corrosion of MgAl2O4 Spinel with Different Al2O3 Contents in Iron-Containing Gasifier Slag Fabrication of MgO/Graphene Composites by Combustion Synthesis and Spark Plasma Sintering Preparation and Properties of Phase Change Thermal Insulation Materials Rheological Behaviors of Calcium Aluminate Cement-Hydratable Alumina Bonded Corundum-Spinel Castables Suspensions with Different Dispersants Potash Erosion Resistance of Chromium-Containing Materials Preparation of Lightweight Mullite-Anorthite Refractories by Different Routes Light Burning Condition of Preparing Dolomite Clinker Using Natural Dolomite Crystallization and Optical Properties of Sr3Al2O6-SrAl2O4 Eutectic Glass Thermal Expansion of SrZr4-xTix(PO4)6 Ceramics The Mechanical Properties and Thermal Resistance of Fly Ash Geopolymer Foams Thermal Resistance of Fly Ash Geopolymers with Alumina as Additive Preparation and Characterization of 3Y-ZrO2 Composite Ceramics The Effects of Carbon Content on ZrCO Microspheres Prepared by Internal Gelation Process with Carbon Black Toughened Laminated Alumina/Silica Ceramics Formed by Weakening Interlayer Bonded Strength Preparation and Properties of Cf/Mullite Composites by PIP Effect of Nano-Al2O3 Particles Addition on Thermal Shock Resistance of ZTA/Cordierite Composites Effect of SiCp Addition on Microstructure and Mechanical Properties of ZTA Ceramics by Microwave Sintering Effect of Sintering Temperature on Properties of YAG Porous Ceramics via Atmospheric Sintering Method The Influences of Addition of MgCO3 on the Properties of the Magnesia Prepared Using Magnesite Effect of Silicon Addition on the Properties of Carbon Fiber Reinforced Mullite Based Castable Composites Fabrication of Porous Mullite Ceramics with Different Phase of Alumina for Insulation Materials Effect of Micro-Sized Alumina Powder on the Hydration Process of Calcium Aluminate Cement Mechanical and Thermal Properties of MgAl2O4-Y3Al5O12 Ceramic Composites Sintering and Crystallization of Al2O3-La2O3-ZrO2 Eutectic Glass Preparation and Performances of Geopolymer-Based Plant Fiber Composites Research on the Performance of Carbon Fiber Reinforced Inorganic Polymer Composite Molten Salt Synthesis and Formation Mechanism of Plate-Like MgAl2O4 Spinel Cryomilling and Characterization of Ti/Al2O3 Powders Densification Technique of Al2O3/Al Metal Ceramics Using Powder Metallurgy Method Effect of Sintering Aids Sorts on Properties of Prepared Al2O3-Al Cermet Effect of Molding Processing on Properties of Al2O3-Al Cermet Prepared via Powder Metallurgy Method Chapter 3: Non-Oxide Ceramics and Composites for Structural Applications Low-Temperature Sintering of Porous Silicon Carbide Ceramics with H3PO4 as an Additive Co-Catalyzed Si3N4/Sialon Nanofibers Reinforced SiC Refractories A Mechanically-Alloyed Amorphous 2Si-B-3C-N Ceramic with a Crystallization Temperature up to 1800°C Characterization of Fiber-Like SiCN Formed during the Nitridation of Silicon Characterization of Cf/SiC Composite Fiber Bundle Surface Based on an Optical System Joining SiC Ceramics with Ti3SiC2/TixCy Multi-Interlayer by Spark Plasma Sintering Modification of the Fiber-Matrix Interface in the Carbon Fiber Reinforced ZrB2- Based Ultra-High Temperature Ceramic Composites Polymer-Derived Nano-Sized SiC-Containing ZrB2 Composites: Densification, Microstructure and Flexural Strength Preparation and Ablation Performance of BN Fiber Fabrics Reinforced Nitrides Composites The Microstructure and Shear Properties of SiC/SiC Composite Pins with Designed SiC Fiber Preform The Matrix Cracking Stress and Residual Thermal Stress of 2D SiC/SiC Composite Fabricated by PIP Process Synthesis of the ZrB2-SiC Ceramic from Polymeric Precursor Pyrolysis Thermal Expansion of Ca1-xSrxZr4(PO4)6 Ceramics Quartz Fibers Reinforced SiNB Ceramic Matrix Composites Prepared by PIP Preparation and Performance of C/C-SiC Ceramic Matrix Composites Influence of Carbon Fiber Treatment on Flexural Properties of C/SiC Composites Spark Plasma Sintering and Characterization of Mixed h-BN Powders with Different Grain Sizes Influence of Technological Conditions on the Properties of PcBN Composites Fabricated by Spark Plasma Sintering Study on the Microstructure and the Machining Performance of Ti3SiC2-TiB2- TiC Composite Ceramic The Preparation of Cf/ SiC-ZrC Composite Material by Adding SiC and ZrC Powders in Organic Precursors Processing and Properties of (Zr,Hf)B2-SiC Ceramic Composites Isothermal Oxidation Resistance of Zr3[Al(Si)]4C6-Based Composite Ceramics at 1000-1300°C in Air Preparation and Properties of NZP Family Ceramics Fabrication of Dense Silica Ceramics through a Stereo Lithography-Based Additive Manufacturing Chapter 4: Coatings and Films Preparation of Dense Al2O3 Film on 8YSZ Coating by Sol-Gel Method Thermal Shock Resistance of Yb2SiO5/Si and Yb2Si2O7/Si Coatings Deposited on C/SiC Composites Stress Evolution and Element Diffusion in Bi-Layered Yb2SiO5/ Mullite Environmental Barrier Coatings under High-Temperature Molten Salt Corrosion Study of Glass-Ceramic Coating on the SUS430 Stainless Steel Plate with High Temperature Oxidation Resistance Thermal Shock Behavior and Bonding Strength of MoSi2-BaO-Al2O3-SiO2 Gradient Porous Coating with Polymethyl Methacrylate Addition for Porous Fibrous Insulations Synthesis of Boron Nitride Coating on Graphene Deposition and Electrical Resistivity of Oxygen-Deficient Tin Oxide Films Prepared by RF Magnetron Sputtering at Different Powers The Impedance Spectroscopy Study of the Oxides Layer in Thermal Barrier Coatings Ablation Behaviors of ZrC-20vol.%MoSi2 Composite Coating under Different Heat Fluxes Oxidation Resistance of ZrB2-SiC-WSi2 Coating Prepared by Vacuum Plasma Spraying Preparation of YAM Coating on the ZrB2 Composites and their Ablation Resistance Effects of Bias Voltage on Microstructure, Hardness and Bonding Strength of TiN Coating Deposited by High Power Pulsed Magnetron Sputtering Tribological Performances of CrSiN Coatings Deposited by High Power Pulse Magnetron Sputtering Oxidation Behavior of Cr1-xAlxN Coatings Deposited by Closed Field Unbalanced Magnetron Sputtering at 800°C Microstructure and Erosion Properties of HVOF Sprayed Cermet Coatings via Different Feedstock Powders Bonding Strength and Thermal Insulation Property of Thermal Barrier Coating with Nanometer Alumina Coated Zirconia Enhanced Bioactivity of Chemically Oxidization-Modified Titanium Alloys Fabrication and Growth Mechanism of Nanoleaf Sodium Titanate Coating on High-Purity Titanium Surface Chapter 5: Dielectric and Piezoelectric Ceramics Preparation and Characterization of PrAlO3-Doped 0.95MgTiO3-0.05CaTiO3 Microwave Dielectric Ceramics Structural Evolution and Microwave Dielectric Properties of Ba(Co1/3(Nb1-xW5x/6)2/3)O3 Ceramics Preparation, Performances and Reaction Process of NiZrNb2O8 Microwave Dielectric Ceramics Polarity Effect and Dielectric Breakdown of Composite Ferroelectric Films as the Dielectric for Electrowetting Systems Using Superhydrophobic SU-8 Film as the Dielectric for Electrowetting-on-Dielectric Preparation of Low Dielectric Constant Porous Silicon Nitride Ceramics for Radome Application BaTiO3/ Teflon Nanocomposite Ferroelectric Thin Films for Low Voltage Electrowetting Systems Topochemical Synthesis of High-Aspect-Ratio Lead-Free (K, Na)NbO3 Plate-Like Structures High Piezoelectric Properties and High TC in KNN-Based Lead-Free Ceramics Sintered in Reducing Atmosphere Effect of Sintering Process on Microstructures and Dielectric Properties of Nb-Doped BaTiO3-(Bi0.5Na0.5)TiO3 Ceramics for X9R MLCC Applications Dielectric Breakdown Strength and Microwave Dielectric Properties of Alumina Ceramics with CaO-SiO2- MgO, Yb2O3 and ZrO2 Additives Preparation and Properties of Si3N4-BaTiO3 Composite Ceramics Chapter 6: Transparent Ceramics and Luminescent Materials Calculation of Pore Scattering in Transparent Ceramics Fabrication of High Dense ZnSe Ceramic by Spark Plasma Sintering: The Effect of the Powder Process Method The Effects of Halogen Exchange on the Structural Features, Thermal Behavior and Photoluminescence of Y/Eu Layered Rare-Earth Hydroxide (LRH) Nanosheets Influence of Annealing Atmosphere on Microstructure and Optical Properties of ZnO Thin Films A Facile Co-Precipitation Synthesis and Luminescence Properties of Red-Emitting La2O2SO4: x%Eu3+ Nanophosphors Energy Transfer and Spectroscopic Characterization of New Green Emitting Li3Ba2Gd3(WO4)8:Tb3+ Phosphor Preparation and Characterization of Na2O-Y2O3-P2O5-SiO2 Transparent Glass Ceramics Influence of Synthesis Temperature on the Properties of SnO2 Thin Films via Hydrothermal Precipitation Method Effect of the Adjuvants on the Properties of Superfine SnO2 Powders Transparent Ultraviolet Photodetectors Based on Ga2O3 Electrospun Nanowires Effect of L-Cysteine on Photoluminescence of Zns:F Quantum Dots Preparation and Properties of Cr,Nd:YAG Transparent Ceramics by Slip Casting A Comparative Study of Relative Translucency of Six All-Ceramic Restorations Synthesis and Property Investigation on the Spherical Lu3Al5O12:Tb3+ Phosphor with Green Emitting Chapter 7: Materials for Energy and Environmental Applications Effect of Rare Earth Doping on Electrochemical Properties of Fe2O3 Nanoparticle for Supercapacitor Fabrication of YSZ/SNDC Bilayer Electrolytes by Spark Plasma Sintering Preparation and Property of LSGM-Carbonate Composite Electrolyte for Low Temperature Solid Oxide Fuel Cell Enhanced Ionic Conductivity in Ce0.8Gd0.2O2-δ Nanofiber: Effect of the Crystallite Size Electronic Structure and Transport Properties of La2Zr2O7 Pyrochlore from First Principles On the Sol-Gel Synthesis and Structure, Electronic and Ionic Conductivities and Impedance Behavior of Y, Fe Co-Doped SrTiO3 Mixed Conductor Effects of Prilling Process on the Microstructures and Electrical Properties of Lanthanum Chromite Ceramics Design and Simulation of a Novel Thermoelectric Micro-Device with Electrodeposited Bi-Te Alloys Preparation and Lithium Storage Performances of Porous Co3O4 Nanorods Hydrothermal Synthesis of Fe3O4@C Spheres as Anode Material for Lithium-Ion Batteries Fabrication of Graphitic Carbon Spheres via a Hydrothermal Carbonization Combined Catalytic Graphitization Method Using Cobalt as Catalysts Effect of pH on the Properties of BiVO4 by Hydrothermal Synthesis Method Synthesis and Characterization of Novel Multipods-Branched Cd-Se-S Micro-/Nano-Structures Enhanced Photocatalytic Activity of Cu1.8Se/CuAgSe for Organic Pollutants under Visible and Near-Infrared Light Effect of Anionic Surfactant on Adsorption Properties of Nano Calcium Carbonate Zn-Cr Layered Double Hydroxides Composites for Methyl Orange (MO) Absorption The Synthesis and Application of the Hollow Mesoporous SiO2/ Dense SiO2/Fe3O4 Composite Particles Synthesis and Photocatalytic Degradation Performance of g-C3N4/ CoAPO-5/rGO Ternary Composite A Facile Synthesis of NiFe2O4 with High Specific Capacitance as Supercapacitor Electrode Material Synthesis of La2NiO4+δ Nanofibers by Electrospinning Method and their Application Preparation and Optical Properties of ZnO Nanocrystals by Chemical Bath Deposition Hydrothermal Method Preparation of Flower-Like Ce-Doped ZnO as an Efficient Photocatalyst The Synthesis, Characterization and Visible-Light Photodegradation Performance of Graphitic Carbon Nitride Coupling with CoAPO-5 Chapter 8: Ceramics-Related Materials P-Type Molecular Sieve Antibacterial Agent and Hydrothermal Control Growth of Highly (110) Oriented Diamond Film by Microwave Plasma Chemical Vapor Deposition The Tribological Properties of Water Lubricated Ceramics with Silica Nanoparticle Additives Investigation on Magnetoviscous Effects of Water-Based Magnetic Fluid Preparation and Performance of Zirconia Fiber Board Computer Modeling of Ceramics Sintering: Effects of Inhomogeneity on Sintering Kinetics The Study of Heating Mode of an Expansion Insulation Material Effect of Alkali Activator on Preparation, and Mechanical and Thermal Properties of Iron Mine Tailing-Based Lightweight Materials Temperature Field Simulation of TC4/SiC Bilayer in Laser Forming Mechanism and Technics to Produce Geographical Indication Products of Chinese Blue-and-White Porcelain Effect of B4C and SiO2 on Bond Property for Phenolic Resin-Based Adhesive


Best Sellers


Product Details
  • ISBN-13: 9783035711769
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 994
  • Spine Width: 50 mm
  • Width: 170 mm
  • ISBN-10: 3035711763
  • Publisher Date: 05 Oct 2018
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 281 Solid State Phenomena
  • Weight: 1790 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
High-Performance Ceramics X: (Volume 281 Solid State Phenomena)
Trans Tech Publications Ltd -
High-Performance Ceramics X: (Volume 281 Solid State Phenomena)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

High-Performance Ceramics X: (Volume 281 Solid State Phenomena)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!