Semi-Solid Processing of Alloys and Composites - Bookswagon
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Industrial chemistry and manufacturing technologies > Other manufacturing technologies > Metals technology / metallurgy > Semi-Solid Processing of Alloys and Composites: (Volumes 116-117 Solid State Phenomena)
Semi-Solid Processing of Alloys and Composites: (Volumes 116-117 Solid State Phenomena)

Semi-Solid Processing of Alloys and Composites: (Volumes 116-117 Solid State Phenomena)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This volume is dedicated to the science and technology of the semi-solid processing of metals. The papers within are grouped into 8 sections: Alloy Design, Industrial Applications, Microstructure and Properties, Novel Processes, Rheocasting, Rheological Behavior and Modeling and Simulation, Semi-Solid Processing of High Melting-Point Materials and Semi-Solid Processing of Wrought Alloys. Readers will find it to be an invaluable guide to the exciting possibilities of this underused processing technique.

Table of Contents:
Principles of Microstructural Formation in Semi-Solid Metal Processing Integrated Development of Controled Semi-Solid Casting Technology for Super-Cooled Ductile Iron Experimental Determination of the Parameters for Modelling Semi-Solid Processing Interaction of Key Variables During Rheocasting: Importance of Microstructure, Fraction Solid and Flow Velocity Semi Solid Casting and Forging of Steel Development of an Advanced Rheocasting Process and Its Applications Determination of Solidification Parameters Used for the Prediction of the Thixoformability of Several Steel Alloys Design and Production of New Aluminum Thixotropic Alloys for the Manufacture of Structural Components by Semisolid Die Casting Application of the Continuous Rheoconversion Process (CRPTM) to Low Temperature HPDC-Part II: Alloy Development & Validation Development of Heat Resistant Mg-Al-Ca Based Alloys for Casting and Semi-Solid Forming Thixoforming and Industrial Application of the Semi-Solid Alloy Al-6Si-2Mg Hot Tearing Susceptibility and Fluidity of Semi-Solid Gravity Cast Al-Cu Alloy Anodic Oxide Layer Formation on A357 Aluminium Alloy Produced by Thixocasting Application of PVD Coatings for Improvement of Die Performance in Copper Semi-Solid Processing Semisolid Casting of Automotive Component: Water Pump Lid Opportunities and Challenges for Use of SSM Forming in the Aerospace Industry Variable-Runner System for Family Mold Filling Balance SSM Technology Unit Design Requirements Numerical Modeling of Planar Flow Casting Process Development of Al-15%Si Hypereutectic Alloy Automotive Part by Local Squeeze and Vacuum Diecasting A Study on the Methodology of Safety Diagnosis for Urban Railway Vehicle Flash Design for Automatic Transfer System of Bearing Hub in Hot Forging Process Comparative Evaluation of TiN/CrN, AlN/CrN, TiAlN/CrN Multilayer Films for the Use of Semi-Solid Processing of Cu Alloys Effects of Casting Variables on Soundness of A356 Alloy Products in Rheo-Diecasting Microstructure Evolution of AZ91D Magnesium Alloy Semi-solid Billets Prepared by a New SIMA Method TEM Study of a Creep-Resistant Mg-5Al-2Sr Alloy after Semisolid Molding Investigation on Fracture Mechanism of A356 during Thixo-Forging Optimal Filling of Test Dies for Evaluating Properties of Semi-Solid Alloys Research Progress of Semi-Solid Processing in China Influence of Rapid Shear-Rate Changes on Microstructure Formation during Semi-Solid Processing Microstructure Changes in Alloy AZ31B in Semisolid State and Its Mechanical Properties SiC Nanoparticles Reinforced Magnesium Alloys by Semisolid Process Numerical Simulation of Pressure Influence on Workpiece Properties during Thixoforging Laser Welding of SSM Cast A356 Aluminium Alloy Processed with CSIR-Rheo Technology Microstructure Control and Structure Analysis in the Semi-Solid State of Different Feedstock Materials for the Bearing Steel 100Cr6 Heat Treatments Effect on A357 Components Produced by SSM Coarsening Kinetics and Coarsened Si Size Distribution of Spray-Formed High Loading Hypereutectic Al-Si Alloys in the Semisolid State Investigation of Flow Behaviour and Microstructure on X210CrW12 Steel in Semi-Solid State In Situ Observation of SSM Microstructure Formation during Cooling Slope Casting of an NH4Cl-H2O Alloy with Vibrating the Slope Plastic Deformation Characteristics of A356 Alloy with the Variation of Cast Microstructure Effect of Slope Plate Variables and Reheating on the Semi-Solid Structure of Al Alloys Kinetics of Coarsening and Solid Sphericity during Reheating of Ductile Iron and Al Alloys Influence of Experimental Parameters on Properties and Microstructure of the Steel X210CrW12 in the Semi-Solid State The Effect of Frequency of Electromagnetic Vibration on the Micro Structure in Hypoeutectic Al-Si Alloy Microstructural Evolution and Wear Properties of In Situ Al-4.5Cu-5TiB2 Composite Processed in Mushy State Design of Experiments for the Optimization the Process Parameters of Thixotropic Aluminum Alloy Phase Segregation Susceptibility of ZA27 Alloy at Different Shear Rates In-Situ 3D Investigation by Fast X-Ray Microtomography of the Microstructural Changes Occurring during Partial Remelting of Al-Cu Alloys The Effect of Differential Speed Rolling on Microstructure and Mechanical Properties of an AZ31 Alloy Sheet Effect of Isothermal Holding Temperature on Globularization of Primary Solid Phase in Multiplex-Type Slurry Cup Optimization of Manufacturing Conditions of Semi-Solid Slurry in Multiplex-Type Slurry Cup A New Deformation-Semi-Solid Casting Process of Highly Concentrated Fe Containing Al-Si-Cu-Fe Cast Alloys Microstructural Evolution of AZ31 Mg Wrought Alloy during Partial Remelting for Thixoextrusion Dynamic Characteristics of the Sinter-Forged Cu-Cr Alloys with the Variation of Chrome Content Dynamic Tensile Tests of Auto-Body Steel Sheets with the Variation of Temperature Pressure-Composition-Isotherm Behavior of Partially Remelted Magnesium Alloys Research on Thixoforging Magazine Plate of AZ91D Magnesium Alloy in Semi-Solid State Fabrication of Rheological Material with Rotational Pressure Type Equipment Microstructural Evolution of Semi-Solid AZ61 Magnesium Alloy during Reheating Process Study on Partial Remelting Microstructures and Mechanical Properties of ZK60-RE Magnesium Alloy Semi-Solid Forming of Al-Mg-Zn Based High Strength Alloys Microstructure and Mechanical Properties of Cast and Semi-Solid Formed Mg-Al-Zn Alloys Microstructure and Damping Capacity of Semi-Solid AM50 Alloy Effect of Disturbing Conditions in Semi-Solid State on Microstructure Evolution of Magnesium Alloy A Study on the Microstructural Defects in Slots of Thixoformed Copper Rotor Mechanical and Adhesive Properties of Plasma CVD Coatings on Various Substrates Using Scratch Test Microstructural Study of Primary Solid Particles in High Density Semi-Solid Al-Zn-Mg Alloy during Stirring The Effect of Frequency of Electromagnetic Vibration on the Primary Silicon Size in Hypereutectic Al-Si Alloy Development of Abnormal Grain Growth in Cold Rolled and Recrystallized AA 5182 Sheet Evolution of Texture and Strain States in AA 3003 Sheet during Sandwich Rolling Sheet Formability of AA 1050 Al Alloy Sheet by Equal Channel Angular Pressing of Route C Type An Experimental Study on the Oriented Mechanical Properties of Aluminum Micro Thin Foil Material Effect of Preheating Temperature of Multiplex-Type Slurry Cup on the Morphology of Primary Solid Phase of Semi-Solid Slurry Effect of Partial Remelting Procedure on the Microstructural Evolution of 7075 Al Wrought Alloy for Thixoextrusion Dynamic Mechanical Properties of Continuously Cast Al Alloy in Electromagnetic Stirrer Effect of Vertical Electromagnetic Stirring on the Grain Refinement of A356 Aluminum Alloy Inoculated by Al-5Ti-B Microstructure and Aging Behavior of AZ91 Mg Alloy Fabricated by Inclined Cooling Plate Fabrication, Microstructure and Mechanical Properties of a SiCw/ZK51A Mg Composite by Semi-Solid Extrusion Directly Following Liquid Infiltration Development of Cup-Cast Method; Semi-Solid Slurry Preparation without External Stirring Force The MSCP Process for Semi-Solid Slurry Production A Novel Technique to Produce Metal Slurries for Semi-Solid Metal Processing Fiber Reinforced Light Metal Composites by Thixoforging of Thermally Sprayed Prepregs Thermal Spray Manufacturing of Semi-Finished Parts for Thixoforming of Fiber and Particle Reinforced Metal Matrix Composites Semisolid Roll Casting of Aluminum Alloy Strip and Its Properties Automated Semi-Solid Forging of Steel Components by Means of Thixojoining Structural Process: Efficient Manufacture of Ductile and Weldable Die Cast Aluminum Components Effect of Ultrasonic Vibration on the Dispersion of Carbon Nano-Fibre Reinforcement through Semi-Solid AZ91D Magnesium Alloy Joining Metals by Combining Mechanical Stirring and Thermomechanical Treatment to Form a Globular Weld Structure Application of the Continuous Rheoconversion Process (CRP) to Low Temperature HPDC-Part I: Microstructure Formation of Bulk Metal Ingots with Homogeneous Fine-Grained Structure Using Novel Semisolid Casting Technique Research on the Composite Slurry Preparation and Rheocasting of Aluminum Alloy Effect of Roll Gap Geometry on the Evolution of Strain States and Textures during Asymmetrical Rolling in AA 1050 Hybrid Preform for Metal Matrix Composites: Processing and Characterization Continuous Fabrication of Sound Semi-Solid Slurry for Rheoforming Parameter Estimation for Semi-Solid Aluminum Alloys Using Transient Experiments Evaluation of Strip Rolling Directly from the Semi-Solid State Microstructure Evolution during Semi-Solid Processing of SCN-Water and Sn-Pb Alloys Effect of Solid Fraction on Microstructure and Casting Faults of AZ91D Alloys in New Type Semi-Solid Injection Process Rheology Forming Process of Cast Aluminum Alloys with Electromagnetic Applications The Effect of Initial Microstructure of A356 Alloys on the Mechanical Behavior in the Semisolid State Study on Microstructures and Mechanical Properties of Rheo-Die Casting Semi-Solid A356 Aluminum Alloy Fluid Flow Investigation of Die Cast Tensile Test Bars Rheoforging of Steel Influence of Slurry Temperature and Gate Velocity on Injection Molding of Magnesium Alloys The SEED Technology for Semi-Solid Processing of Aluminum Alloys: A Metallurgical and Process Overview Semi-Solid Casting of Metal Matrix Nanocomposites Potential of the Rheocasting Process, Demonstrated on Different Aluminum Based Alloy Systems Mechanical and Microstructural Properties Investigation on Rheocast Automotive Parts Using A356 Alloy Evolution of Primary Particles Morphology during Secondary Cooling in SSR® Process. Semi-Solid Casting of Al-7wt%Si Alloy in Expendable Molds Application of CSIR Rheocasting Technology for the Production of an Automotive Component Optimization of Heat Treatment Cycles for Automotive Parts Produced by Rheocasting Process Flow Characteristics of Thin Plate for Rheo-Diecasting Process in Commercial A356 Alloys Development of Aluminum-Lithium Alloys Processed by the Rheo Container Process Development of In-Ladle Direct Thermal Control (DTC) Rheocasting Process Analysis of the Age-Hardening T5 Treatment in a Al-7%Si-0.6%Mg-0.5%Cu Rheo-Cast Alloy The Effect of Stirring Current and Stirring Time on Microstructure and Mechanical Properties in Rheo Die Casting Process Mechanical Behavior of Processed AZ91D by Equal Channel Angular Extrusion during Semi-Solid Isothermal Compression Fluidity and Microstructures Characteristics of AZ 91D by Using New Type Semi-Solid Injection Process Microstructural Evolution of A206 Al Alloy by In-Ladle DTC Rheocasting The Effect of Electromagnetic Stirring on the Semi-Solid Microstructure of High-Melting Alloys Control of Semi-Solid Microstructure of AZ91D Mg Alloys by the Electromagnetic Stirring Aging Behavior of Al-Cu Alloys Produced by Melt Extrusion Process Numerical Simulation of Mould Filling in Rheo-Diecasting Process of Semi-Solid Magnesium Alloys Rheology and Rheometry of Aluminum Alloys: Influence of Shear and Vibration on Aluminum Flow Properties Rheological Behaviour and Microstructural Evolution of Semi-Solid A356 Alloy Produced by Different Routes Analytical Model for Heat Transfer Phenomena in Cup-Cast Method Investigation on the Numerical Simulation for the Dynamic Transition from Liquid to Solid during Liquid-Solid Extruding Forming A New Integration Method Proposed for Hyperbolic Sine Constitutive Equation Used in Semi-Solid Forming Numerical Simulation of Semi-Solid Magnesium Alloy in Continuous Roll-Casting Process Dynamic and Static Yield Stress of Metallic Suspensions Fluid-Structural Interaction Analysis of the MMC-Thixoforging Process Thermo-Mechanical Modeling of the Cooling Process during Thixoforging of Fiber Reinforced Light Metal Composites Influence of Morphology on the Rheological Behavior of Semi-Solid A356 Aluminum Alloy Rheology of Semi-Solid Steel Alloys at Temperatures up to 1500°C Comparison of Rheological Measurement Techniques for Semi-Solid Aluminium Alloys Semisolid Structure Simulation in Controlled Nucleation Process Simulation of Thixoforming: Comparison of Different Constitutive Equations Modeling of Semi-Solid A356 Alloy under Upsetting Process The Use of ADINA Software to Simulate Thixocasting Processes Application of Computer Simulation in Developing Automotive Parts of Al Alloy by Using Semi-Solid Die Cast Process Microstructures and Mechanical Properties of Melt Extruded Al-Cu Alloys Constitutive Model of Thixotropic Plastic Forming for Semi-Solid AZ61 Magnesium Alloy Microstructure and Stress Variation of Semi-Solid Magnesium Alloy during Isothermal Compression and Its Relationship to Thixotropy Thixotropic Behavior of Semi-Solid Magnesium Alloy Filling and Solidification Characteristics during Thixoforming of Copper Rotor for the Electrical Motors Rheological Properties of Molten Al-Cu Alloys for Manufacturing Metallic Foam The Use of Small Punch Sample for Testing of Mechanics Properties of Aluminium Alloy Welded Joint Effect of Electromagnetic Stirring during Solidification on the Morphological Evolution of Primary Solid Phase of Al Alloy Development of Computer Assisted Tool Design for Material Forming Processes Numerical Analysis of Two-Phase Thermal Flow for Rheology Forging Process Viscosity–Shear Rate Relationship during the Thixoforming of HP9/4/30 Steel Microstructural Evolution and Deformation Behavior of Stainless Steel in Semi-Solid State Series Production of Thixoformed Steel Parts Design, Construction and Performance of Silicon Nitride Tool Parts in Steel Thixoforming Development of a Self-Heating Ceramic Tool for the Thixoextrusion of High Melting Point Alloys In Situ Environmental Scanning Electron Microscopy (ESEM) of Semi-Solid Samples Alumina PVD Tool Coatings for the Use in Semi Solid Metal Forming of Steel Steels with Different Carbon Content for High Pressure Die Casting in Semisolid State Steel Grades Adapted to the Thixoforging Process: Metallurgical Structures and Mechanical Properties Thixoforming of Carbon Steels: Inductive Heating and Process Control Thixoforming of Steel – Influence of Thermal Parameters High Volume Fraction Al2O3/Al Composite Thixoforging in Pseudo-Semi-Solid State Application of Semi-Solid Process for Production of the Induction Motor Squirrel Cage Inductive Reheating of Steel Billets into the Semi-Solid State Based on Pyrometer Measurements Study on Static Shear-Rheologic Characteristics of Semi-Solid AZ91D Magnesium Alloy by Reheating Hot Compressive Deformation of Rheocast AZ31 Magnesium Alloy Simple Manufacturing Method for A7075 Aluminum Alloy Slurry with Fine Granules and Application to Rheo-Extrusion Continuous Strip Casting, Microstructure and Performance of Ag-Cu Brazing Alloy Optimization of the Microstructural Evolution of Al-8%Si in Cooling Slope Device Semisolid Forging of 7000 Series Aluminum Alloys Thixoforging of 7075 Aluminium Alloys at High Solid Fraction Flatness Based Inductive Reheating of A356 Billets into the Semi-Solid State Development of Thixoextrusion Process for 7000 Series Al Wrought Alloys Structural Evolution and Deformation Behavior of Extruded AZ91 with Ca Addition in the Semi-Solid State Effect of Crystal Orientation on Textures of Electromagnetic Stirred Aluminum Alloy Grain Size Control of Wrought Aluminum Alloy for Rheology Forging by Electromagnetic Stirring and Its Mechanical Properties Thixoextrusion Process of AZ31 Mg Wrought Alloy Hot Forging of Semi Solidified High Strength Brass A Study on the Composition Determination of Cu Alloys by Image Processing Technology


Best Sellers


Product Details
  • ISBN-13: 9783908451266
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 824
  • Series Title: Volumes 116-117 Solid State Phenomena
  • Weight: 1200 gr
  • ISBN-10: 3908451264
  • Publisher Date: 07 Oct 2006
  • Binding: Paperback
  • Language: English
  • No of Pages: 824
  • Spine Width: 41 mm
  • Width: 170 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Semi-Solid Processing of Alloys and Composites: (Volumes 116-117 Solid State Phenomena)
Trans Tech Publications Ltd -
Semi-Solid Processing of Alloys and Composites: (Volumes 116-117 Solid State Phenomena)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Semi-Solid Processing of Alloys and Composites: (Volumes 116-117 Solid State Phenomena)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!