Semi-Solid Processing of Alloys and Composites XII
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Semi-Solid Processing of Alloys and Composites XII: (Volumes 192-193 Solid State Phenomena)
Semi-Solid Processing of Alloys and Composites XII: (Volumes 192-193 Solid State Phenomena)

Semi-Solid Processing of Alloys and Composites XII: (Volumes 192-193 Solid State Phenomena)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

These proceedings of the 12th International Conference on Semi-Solid Processing of Alloys and Composites contain the papers which were presented at the conference, held in Cape Town (South Africa) between the 8th and 11th October 2012. The aim of these international conferences is to provide a forum where the leading researchers, engineers and industrialists in this field can gather in order to share their work and knowledge, and hold lively discussions concerning current fundamental issues in semi-solid metal processing. Volume is indexed by Thomson Reuters CPCI-S (WoS). The contents are divided into 5 distinct sections: Microstructure and Properties; Process Development; Modeling, Simulation and Rheology; Materials Development and Alloy Design and Industrial Applications.

Table of Contents:
Preface and Organizing Committees Plenary R-HPDC in South Africa Alloys for Semi-Solid Processing Applications of Semi-Solid Slurry Casting Using the Gas Induced Semi-Solid Technique Industrial Applications of Rheoforming Technology in China The Technology and Commercialization of Thixomolding® Chapter 1: Material Development and Alloy Design Semi-Solid High Pressure Die Casting of Metal Matrix Composites Produced by Liquid State Processing Production of A356/TiB2 Nanocomposite Feedstock for Thixoforming by an Ultrasonic Method The Use of High Pressure Direct Squeeze Casting for Semi-Solid Processing of Aluminum Base Nano Composites Influence of Nanodispersions on Properties and Microstructure Features of Cast and T6 Heat-Treated Al Si Hypoeutectic Alloys Continuous Production of Metal Matrix Composites from the Semisolid State Manufacturing of Composite and Hybrid Materials by Semi Solid Forming Mechanical Properties of Hypo/Hyper-Eutectic Al-Si Bi-Metal Composite Parts Prepared by Thixo-Forging Reduction of Hot Tearing of Cast Semi-Solid 206 Alloys Chapter 2: Microstructure and Properties Evolution of the Solidification Microstructure of Rheocast High Purity Aluminium Rheo-Processing of Near-Eutectic ADC12 Alloy Coarsening Mechanism of Isothermal Heat Treatment for ADC14 Semi-Solid Alloy Microstructure and Mechanical Properties of Hypereutectic Al-Si Alloy with 2% Fe Prepared by Semi-Solid Process Microstructural Evaluation of Semi-Solid and Thixoformed Parts of LM28 Aluminum Alloy Characterization of the Microstructure and Rheological Behavior of Al-4wt%Si-2.5wt%Cu Alloy Produced by Direct Chill Casting and Electromagnetic Stirring Experimental Investigation on 7075 Aluminium Response during Thixoextrusion The Heat Treatment of Rheo-High Pressure Die Cast Al-Zn-Mg Alloy 7017 Fusion Welding of Rheocast Semi-Solid Metal (SSM) Processed Aluminium Alloy 7017 Property and Quality Optimization of Laser Welded Rheo-Cast F357 Aluminum Alloy The Heat Treatment of Rheo-High Pressure Die Cast Al-Cu-Mg-Ag Alloy 2139 Globule-Globule Interactions during Deformation in Semi-Solid Al-Cu Using Time-Resolved X-Ray Tomography In Situ Study of the Altering Globule Packing-Density during Semisolid Alloy Deformation Determination of Quantity and Localization of Liquid in the Semi-Solid State Using both 3D X-Ray Microtomography and 2D Techniques for Steel Thixoforming Properties of Thixocast Spring Steel Ratchets The Influence of Reheating Profile on the Final Microstructure of the Semi-Solid S600 and K100 Tool Steels Effect of Recrystallization and Partial Melting Method on Microstructural Evolution of SKD61 Tool Steel in Semi-Solid State Micro-Compression Test of Thixoformed Austenite Microstructure of Thixoformable Hypoeutectic Cast Iron R-HPDC of Magnesium Alloys Corrosion Behaviour of High Pressure Die-Cast and Semi-Solid Cast AZ91, AM60 and AM50 Alloys Microstructural Evolution of AZ91D-1.5%Er during Semi-Solid Isothermal Treatment Study on Microstructural Evolution of Deformed Magnesium Alloy during Partial Remelting Investigation of Correlations between Shear History and Microstructure of Semi-Solid Alloys Microstructure and Mechanical Properties of Squeeze Cast Semi-Solid Materials Chapter 3: Modelling, Simulation and Rheology Squeeze Flow of Semi-Solid Slurries A Thermomechanical Model Dedicated to Thixoforming. Application to Semi-Solid Forming A Boubaker Polynomials Expansion Scheme for Solving the Flow of Nonlinear Power-Law Fluid in Semi-Solid State Experimental and Simulation Study of Microstructure of the Aluminium Alloy 319s in Induction Reheating Process Numerical Simulation on Rheo-Diecasting of Magnesium Matrix Composites Numerical Simulation on the Filling Process of Rheological Die Casting and Forming Defects Analysis Investigate on Flexible Thixo-Extrusion of Complex Part Friction Welding of Thixocast A356 Aluminium Alloy Flow Behaviour of M2 Steel Alloy during Semi Solid Isothermal Rapid Compression The Rheological Behavior of HS6-5-2 Tool Steel for Non-Isothermal Processing Rheological Properties and Microstructure of Hypereutectic Semi-Solid Al-Si-Mg Alloys Using Rheocasting Route Rheological Characterization of Semi-Solid A356 Aluminium Alloy Study on Thixotropic Property of A356 Alloy in Semi-Solid State Studies on Rheocasting Using Cooling Slope On the Filling of Semi-Solid during Thixocasting Wall Slip Effect in Couette Rheometers A High-Precision Rotational Rheometer for Temperatures up to 1700 °C High Temperature Flow Behaviour of Semi-Solid Steel Alloys Chapter 4: Process Development New Developments with the SEED Technology Investigation of Semi-Solid Slurries Prepared by Helical Curve Duct Microstructure of Al Alloy Semi-Solid Slurry Made in Metallic Vessel Using Vibrating Plate Effect of Superheat on Melting Rate of EEM of Al Alloys during Stirring Using the RheoMetal Process Preparation of AlSi9Mg Alloy Semi-Solid Slurry by Electromagnetic Stirring Combined with Mechanical Vibration Preparation and Rheo-Die Casting of Semi-Solid A356 Aluminum Alloy Slurry through a Serpentine Pouring Channel Experimental Study on Semi-Solid Indirect Squeeze Casting Effect of the Parameters in Inverted Cone-Shaped Pouring Channel Process on the Microstructure of Semi-Solid 7075 Aluminum Alloy Slurry Forced Convection Rheomoulding Process for Semisolid Slurry Preparation and Microstructure Evolution of 7075 Aluminum Alloy Effect of Ultrasounds during the Solidification Process of the A357 Aluminium Alloy On Non-Dendritic Microstructure Formation during Sand Casting of A356 Alloy Development of Generation Technology of High Quality Semi-Solid Slurry by Double-Axis-Electromagnetic Stirrer Combined with Properly Designed Cup Development of Aluminum Die Casting Products with High Accuracy as Well as Superior Die-to-Casting Transcriptional Capability by Using Semi-Solid Method A357 Aluminium Cast Alloys for Extrusion Processes Study on the Semi-Solid Thixo-Diecasting Process of Aluminum Alloys and Die Design Application Research on Annular Electromagnetic Stirring Casting Process of Al-Zn-Mg-Cu Alloy Rheo-Extrusion of AZ91D Experimental Study on Rheoforming of Quality Magnesium Alloys Microstructure Characteristics and Semi-Solid Slurry Formation in Binary Mg-Al Alloys Produced by the RheoMetal Process Improvement of Free Solidified Surface of Strip Cast Using a Single Roll Caster by Scribing Semisolid Layer Refining and Recycling of Metal Scraps by Semisolid Processing Mini-Thixoforming of a Steel Produced by Powder Metallurgy Casting Wear-Resistant Functionally Gradient Ferrous Alloys via Partial Solidification Processing Chapter 5: Industrial Applications Production of Titanium Alloy Components by Semi-Solid Forming Some Approaches on Industrial Installation of Steel Thixoforged Processes Tooling Materials and Solutions for Thixoforming of Steel Industrial Heat Treatment of R-HPDC A356 Automotive Brake Callipers On the Rheocasting of High Integrity Hollow Shape Components for Automotive Applications Using 357 Aluminum Alloy Extremely Light Weight Rheocast Components for Automotive Space Frame Semisolid Forging of Hypereutectic Al-Si Alloy for Automobile AC Compressor Components Casting and Heat Treatment of Turbocharger Impellers Thixocast from Alloy 201 Semisolid Processing of Al-Sn-Cu Alloys for Bearing Applications Semi-Solid Preparation and Performance of Magnesium Based Thermoelectric Materials


Best Sellers


Product Details
  • ISBN-13: 9783037854815
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 600
  • Spine Width: 30 mm
  • Width: 170 mm
  • ISBN-10: 3037854812
  • Publisher Date: 03 Jan 2013
  • Binding: Paperback
  • Language: English
  • Series Title: Volumes 192-193 Solid State Phenomena
  • Weight: 1200 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Semi-Solid Processing of Alloys and Composites XII: (Volumes 192-193 Solid State Phenomena)
Trans Tech Publications Ltd -
Semi-Solid Processing of Alloys and Composites XII: (Volumes 192-193 Solid State Phenomena)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Semi-Solid Processing of Alloys and Composites XII: (Volumes 192-193 Solid State Phenomena)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!