Process and Advanced Materials Engineering
Home > Medicine & Health Science textbooks > Medicine: general issues > Process and Advanced Materials Engineering: (Volume 625 Applied Mechanics and Materials)
Process and Advanced Materials Engineering: (Volume 625 Applied Mechanics and Materials)

Process and Advanced Materials Engineering: (Volume 625 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from the 3rd International Conference on Process Engineering and Advanced Materials (ICPEAM2014), June 3-5, 2014, Kuala Lumpur, Malaysia. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 213 papers are grouped as follows: Chapter 1: Advanced Materials Development and Technologies, Chapter 2: Catalysts, Inhibitors and Reaction Engineering, Chapter 3: Technological Processes, Methodology and Industrial System Engineering, Chapter 4: Separation Processes and Membranes, Thermodynamics, Chapter 5: Biomaterials and Technologies, Environmental Engineering

Table of Contents:
Preface and Organizing Committee Chapter 1: Advanced Materials Development and Technologies Effect of NaOH and Water Contents on Solidification of Sodium Silicate Free Geopolymer Phase Behavior and Ternary Diagram Construction for Membrane Forming Polycarbonate Solutions Physicochemical Properties of Diethanolamine-Functionalized Si-MCM-41 Antioxidant Activity and HPLC Analysis of Gallic Acid Phenolic Compound from Nephelium Lappaceum Leaves Study of CO2 Solubility in Aqueous Blend of Potassium Carbonate Promoted with Glycine Parametric Influence on the Physical Characterizations of Covalent Organic Framework-1 Electron-Beam Irradiation of Halogen Free Flame Retardant Polymers for Wire and Cable Applications Decentralized Control Design for Ethanol Fermentation by Zymomonas Mobilis – Multi-Scale Control Approach Mechanical Activation of Fly Ash by High Energy Planetary Ball Mill and the Effects on Physical and Morphology Properties Optimization of Temperature Rise during CO2 Absorption Process Using Response Surface Methodology Effect of Solid to Liquid Ratio on the Mechanical and Physical Properties of Fly Ash Geopolymer without Sodium Silicate Optimization of Naphthalene Extraction from its Mixture with Base Oil and Dibenzothiophene by BMIMDMP Ionic Liquid Using Response Surface Methodology (RSM) Identifying Thermal and pH Stability of Thiols Compound in Garlic Extract Citric Acid Future Prospects for Pakistan, a Short Review Heavy Metal Ions Removal Using Amine-Functionalized Mesoporous Adsorbents Effect of the Solvent Molar Ratios on the Synthesis of Zeolitic Imidazolate Framework 8 (ZIF-8) and its Performance in CO2 Adsorption An Evaluation of Fish Scales as Potential Adsorbents: pH and Concentration Effect Hybrid Model for Biopolymerization Process (ε-Caprolactone to Polycaprolactone) Study on Mechanical Properties of Zirconia-Alumina Based Ceramics Effect of Na/Al and Si/Al Ratios on Adhesion Strength of Geopolymers as Coating Material Modifying the Refractive Index of Epoxy Resins Using Reactive Diluents to Enable Optical Self-Sensing in E-Glass Fibre Composites The Effect of KOH Concentration on Setting Time and Compressive Strength of Fly Ash-Based Geopolymer Effects of Intercalated Mono-, Di- and Triethanolammonium Cations on the Structural and Surface Characteristics of Sodium Form of Bentonite Effect of NaOH Concentration on the Strength of Non Sodium Silicate Fly Ash Geopolymer Preparation and Characterization of Polysulfone/Activated Carbon Composite Bead Form Sol Gel Synthesized Nanosilica as Photoanode Material for Dye Sensitized Solar Cells (DSSCs) System Microstructure Characterization for P92 Steels Subjected to Short Term Overheating above Critical Transformation Temperatures Desulfurization of Fuel Using Ionic Liquids: Computational Selection of Cation and Anion Influence of Citric Acid and Curing Time on Water Uptake Experimental Study of Geopolymer Solidification Kinetics Optimization of Coating Thickness in a Tangential Fluidized Bed Cellulose-Modified Carbon Electrode for In Situ Lead Detection Dye Sensitized Solar Cell Based on Polyethylene Glycol/4,4’-Diphenylmethane Diisocyanate Copolymer Quasi Solid State Electrolyte Study on the Recovery of 1-butyl-3-methylimidazolium-based Ionic Liquids The Effect of Surface Area, Pore Volume, and Pore Size Distribution on the Modified Multiwalled Carbon Nanotubes Ecotoxicity of Pyridinium Based Ionic Liquids: A Review Screening of Microalgae for Antioxidant Activities, Carotenoids and Phenolic Contents Evaluation of Antioxidants, Pigments and Secondary Metabolites Contents in Spirulina platensis Ionic Liquid – Assisted Synthesis and Characterization of Cerium Oxide Nanocubes for Degradation of Methylene Blue Enhance the Colloidal Stability of Magnetite Nanoparticles Using Poly(sodium 4-styrene sulfonate) Stabilizers Polyethersulfone (PES) Membranes for CO2/CH4 Separation: Effect of Polymer Blending Mathematical Modelling for Hydrogen Production from Steam Gasification of Cellulose Effect of Sintering Temperature on Microstructure and Mechanical Properties of Ti-Nb-Sn-HA Composites Produced by Powder Metallurgy Evaluation of Carbon Dioxide Adsorption on Malaysian Coals for Potential Sequestration Modelling of CO2 Loading in DEA by Using Peak Ratio of Raman Spectroscopy Relationships between Microstructure and Mechanical Properties of Polycristalline Alumina The Impact of the Composition of the Crude Oils on the Wax Crystallization Effect of Mixing Methods on the Precipitation of Basic Copper Acetate Extractive Desulphurization of Model Oil Using Sulphonium Based Ionic Liquids Fine Structural Analysis of Solvent Activated Cu-BTC for Carbon Dioxide Capture Synthesis and Characterization of Hybrid Flocculant Kenaf Based Application of Minute-Bubble Technique to Reactive Crystallization of Hydroxyapatite Developments in Mercury Removal from Natural Gas - A Short Review Study of Simultaneous Mass Transfer and Nucleation in Cryogenic Packed Bed for the Removal of CO2 from Natural Gas Solubility of CO2 in Piperazine (PZ) Activated Aqueous Solutions of 2-Amino-2-methyl-1-propanol (AMP) at Elevated Pressures A Review on Robustness of Covalent Organic Polymers for CO2 Capture Removal of Methylene Blue from Aqueous Solution by Ionic Liquid Linear and Non-Linear Regression Analysis of Boron Adsorption Kinetics on New Radiation Grafted Fibrous Adsorbent Chapter 2: Catalysts, Inhibitors and Reaction Engineering Kinetic Analysis on Catalytic Co-Gasification of Rubber Seed Shell and High Density Polyethylene Mixtures A Review of Bio-Oil Upgrading by Catalytic Hydrodeoxygenation Catalytic Cracking of Synthetic Bio-Oil: Kinetic Studies Kinetic Studies on Gold Nanoparticle Formation in Aqueous Medium Microwave Energy Pretreated In Situ Transesterification of Jatropha Curcas L in the Presence of Phase Transfer Catalyst Ethanol Steam Reforming over Calcium Doped Ni/Al2O3 Catalyst Catalytic Decomposition of Methane over La2O3 Supported Mono- and Bimetallic Catalysts Spontaneous Ignition Behavior of Nitrocellulose–Sulfuric Acid Mixtures Reaction Engineering of Microchannel Catalytic Reactors for Green Process Effect of Mn and Pb Promoters on the Performance of Cu/ZnO-Catalyst in CO2 Hydrogenation to Methanol Photocatalytic Degradation with WO3/TiO2 Composites under UV and Visible Light Conversion of Biomass-Derived Oxygen-Containing Intermediates into Chemical Raw Materials with Zeolite Reaction Kinetics of In Situ Methanolysis of Jatropha curcas Seeds Conversion of Inedible Biomass Wastes as Alternative Petroleum-Related Chemicals Using Iron Oxide Catalysts Time-Series Analysis for Kinetic Interpretation of Catalytic Cracking of 1-Octene with a Model Involving Dominant Reactions Hydrogen Production by Methane Dry Reforming on Supported Nickel Catalysts – Enhanced Stability of the Reforming Process Transesterification of Pongamia pinnata Oil into Biodiesel Using Quick Lime Based Calcium Methoxide as Catalyst Synthesis and Characterization of Co/CNTs Catalysts Prepared by Strong Electrostatic Adsorption (SEA) Method Laccase Incorporated into PEG-PLA Polymer as Active and Stable Biocatalyst for Ionic Liquids Media Study of 1-(2-Hydroxyethyle) 3-methylimidazolium Halide as Thermodynamic Inhibitors Conversion of Lignocellulose into Fermentable Sugars Using Solid Acid Catalysis – A Review Effect of Modification Techniques on Surface of Carbon Nanofiber as Catalyst Support Development of Morphology Dependent Titania Nanomaterial for Photo Degradation of Dyes Effect of Ball Milling on the Catalytic Conversion of Cellulose to Levulinic Acid Upgrading of Pyrolysis Bio-Oil to Fuel over Supported Nanomaterials - A Review Catalytic Conversion of Oil Palm Fronds to Levulinic Acid in Ionic Liquid Chapter 3: Technological Processes, Methodology and Industrial System Engineering Flow Dynamics Investigation of CO2/CH4 Gas Mixture through Porous Media Using Computational Approach Heat Exchanger Network Optimization Using Differential Evolution with Stream Splitting Study of the Effect of Surface Roughness on Droplet Spreading Behavior Using CFD Modeling A Comparison Study between Integrated OBFARX-NN and OBF-NN for Modeling of Nonlinear Systems in Extended Regions of Operation CO2 Rich Gas Mixture Hydrate-Liquid Water-Vapor (H-Lw-V) Equilibrium Measurement and Prediction An Integrated Framework for Refinery Scheduling and Operational Optimization CFD Simulation of Droplet Formation under Various Parameters in Prilling Process Detection of Model Parameter Mismatch Using Simplified Partial Correlation Analysis for Closed-Loop System Dynamics of Wall Heated Packed Bed Reactors Compliance Audit Model for Managing Process Safety in Process Industries CFD Study on Syngas Dispersion for Biomass Process Industry Identification of Multi-Input Multi-Output Systems Using Combined Direct and Indirect Methods Compliance of Hot Work Permit to Process Safety Management (PSM) Regulation Economic Optimization of CO2 Capture Process Using MEA-MDEA Mixtures Three-Tier Inherent Safety Quantification (3-TISQ) for Toxic Release at Preliminary Design Stage Dynamic Studies of Refinery Sludge Gasification in Updraft Reactor Isolation of Interacting Channels in Decentralized Control Systems Using Instrumental Variables Method Evaluation of Electrical Capacitance Tomography Thresholding Techniques for Void Fraction Measurement of Gas-Liquid System Comparison of Image Processing Methods for the Detection of Particle from Digital Hologram Molecular Simulation for Piperazinium Based ILs: Effects of Alkyl Chain, Concentration and Anions on Henry’s Constants Recent Developments in Advanced Process Integration: Learning the Lessons from Industrial Implementations An Investigation into the Need of Process Safety Management (PSM) in the Palm Oil Industry Optimization of Condensate Fractionation Unit Using Response Surface Methodology Sustainable Integrated Process Design and Control for a Continuous-Stirred Tank Reactor System Sustainable Integrated Process Design and Control for a Distillation Column System Consequence Study of Pressurized CO2 Release Containing Impurities with Obstacles Robust and Effective PID Controller Identification for Delay Dominant Systems Effect of Bulk Temperature on Formation of Crude Oil Fouling Precursors on Heat Transfer Surfaces Development of Process Safety Management System (PSMS): Mechanical Integrity (MI) Methodology Development of a Flexible and Operable Energy Integrated Distillation Columns Parametric Study and Improvement in Fuel Properties of Pre-Blended Methyl Esters from Crude Palm and Rubber Seed Oil Preparation and Characterization of Rice Husk Ash for Adsorption of Phenol from Aqueous Solutions Preparation and Characterization of Hydrophobic Silica Zirconium Nanoparticles Preparation and Quantification of Radioactive Particles for Tracking Hydrodynamic Behaviour in Multiphase Reactors CFD Modeling of a Thin Liquid Film Flow over Horizontal Spinning Disk Saccharomyces cerevisiae from Baker’s Yeast for Lower Oil Viscosity and Beneficial Metabolite to Improve Oil Recovery: An Overview The Effects of Glass Bubbles, Clay, Xanthan Gum and Starch Concentrations on the Density of Lightweight Biopolymer Drilling Fluid Chapter 4: Separation Processes and Membranes, Thermodynamics Fabrication and Characterization of Facilitated Transport Membrane for Gas Separation Modeling of CO2 Capture by Amine Solution (MDEA) in Hollow Fiber Membranes Comparative Study of Linear Co-Volume Based Mixing Rules for Equation of State/ Excess Gibbs Energy (EOS/GE) Models for CO2 – MEA and CO2 – MDEA Systems Effect of Acetone on Physical Properties of PES Membrane Solubility of CO2 in an Aqueous Ammonium Based Ionic Liquid Hydration Behavior Study of Imidazolium Based ILs in Water Impact of Gas Phase Composition on Gas Hydrate Process for Carbon Dioxide Capturing from Gaseous Mixtures Supersaturated Gas Bubble Formation across an Orifice Effect of Superficial Gas Velocity on the Separation Efficiency of Inline Horizontal Swirl Tube Separator Separation of Naphthenic Acid Using Hydroxide Based Ionic Liquids Phase Diagram of an Aqueous Salt-Polymer System Composed of Poly Ethylene Glycol 4000 + Na3C6H5O7+ H2O Separation of Benzene and Cyclohexane with Mixed Solvent Using Extractive Distillation An Equation of State for the Liquid Phase Thermodynamic Properties of Flufenamic Ionic Liquids Characterization Study of a Highly Specific Affinity Membrane for Trypsin Purification Removal of Lactose from Highly Goat’s Milk Concentration through Ultrafiltration Membrane Novel Approach and Setup for Multi Component Mixtures Separation and Analysis at Offshore Conditions Physiochemical Properties of Pyrolysis Oil Derived from Fast Pyrolysis of Wet and Dried Rice Husk in a Free Fall Reactor Fast Pyrolysis of Oil Palm Kernel Shell in a Fluidized Bed Reactor: The Effect of Biomass Size on the Yields of Pyrolysis Products Effects of the Heat Carrier’s Temperature and Particle Size on the Pyrolysis of Imperata cylindrica in a Transported Bed Reactor Fast Pyrolysis of Oil Palm Kernel Shell in a Fluidized Bed Reactor: The Effect of Pyrolysis Temperature on the Yields of Pyrolysis Products Experimental Study on Heat and Mass Transfer during Fast Pyrolysis of Biomass Particle Comparison of the Yield and Properties of Bio-Oil Produced by Slow and Fast Pyrolysis of Rice Husks and Coconut Shells Studies on Pyrolysis of Rice Husk Using Taguchi's L9 Orthogonal Array Techno-Economic Evaluation of Cryogenic Networks for Separation of CO2 from Natural Gas Removal of Amines from Wastewater Using Membrane Separation Processes Hydrogen and Syngas Generation from Gasification of Coal in an Integrated Fuel Processor Ba-SAPO-34 Zeolite Membrane for CO2/N2 Separation: Process Optimization Interfacial Defects on Mixed Matrix Membranes and Mitigation Techniques for Gas Separation: A Review Effect of Column Height on Mass Transfer Characteristics of Spray Column Synthesis and Characterization of ZIF-8 Mixed Matrix Membranes Development of Membrane Reformer System for Hydrogen Production from Natural Gas Novel Approach and Setup for Multi Phase Mixtures Separation and Analysis at Offshore Conditions Pyrolyzed Waste Engine Oil Properties by Microwave-Induced Reactor Simulation and Analysis of Process Behavior of Ultrasonic Distillation System for Separation Azeotropic Mixtures Effects of Ionic Liquid Blending in Polymeric Membrane: Physical Properties and Performance Evaluation Characterization and Assessment of Cockle Shell as Potential CO2 Adsorbents Polymer-Nanoclay Mixed Matrix Membranes for CO2/CH4 Separation: A Review Effects of Montmorillonite (MMT) Inorganic Fillers on Polyvinylidene (PVDF) Mixed Matrix Membrane A Review on Glassy Polymeric Membranes for Gas Separation Gas Permeability Study of Amine-Polymer Blend Membranes to Separate Carbondioxide from Natural Gas Raman Spectroscopic Study for the Determination of Monoethanolamine Concentration Review on Pyrolysis of Hardwood Residue to Biofuel Influence of Orifice Shape on Reaction Rate by Hydrodynamic Cavitation Heat Transfer with Chemical Reaction in Wall Heated Packed Bed Reactor Mathematical Modeling of the Radial Crossflow Hollow Fiber Membrane Module for Multi-Component Gas Separation Thermodynamic Analysis of Autothermal Reforming of Oxygenated Hydrocarbons at Thermoneutral Condition for Hydrogen Production Chapter 5: Biomaterials and Technologies, Environmental Engineering Use of Waste Coconut Oil Obtained from Waste Water Pond of Coconut Milk Plant to Produce Biodiesel Delignification of Empty Fruit Bunch (EFB) Using Low Transition Temperature Mixtures (LTTMs): A Review Study the Release of Urea from Agrium® Coated Urea Using UV-Vis Spectrometer Biosorption of Heavy Metal Ions, Oil and Grease from Industrial Waste Water by Banana Peel Curing Characteristics and Tensile Properties of White Fly Ash Filled Natural Rubber Compounds pH Dependence on Biosorption of Pb (II) by P. amaryllifolius Roxb Recent Advancements on Superabsorbent Polymers to Produce Controlled Release Urea (Short Review) Optimization of Ethanol Production from Mango Peels Using Response Surface Methodology Adsorption of Azo Dye Orange II by Supported TiO2: A Review Aspects of Carbon Dioxide Mitigation by Nannochloropsis oculata Cultured in a Photobioreactor Modelling of Carbon Dioxide Leakage in Abandon Wells Using Computational Fluid Dynamics Chitosan-Grafted Nanocellulose Derived from Empty Fruit Bunch for Ethyl Orange Removal Modelling of Adams-Bohart and Yoon-Nelson on the Removal of Oil from Water Using Microwave Incinerated Rice Husk Ash (MIRHA) Monoethanolamine (MEA) Wastewater Treatment Using Photo-Fenton Oxidation The Potential of Thiosulfinates in Garlic Extract as Urease Bioinhibitor Palm Bio-Oil Upgrading Research-Towards Effective Utilization of Waste Removal of Phosphate and Fluoride from Industrial Wastewater – A Short Review Screen-Printed Carbon Electrodes for the Detection of Boldenone Bismuth-Modified Hydroxyapatite Carbon Electrode for Heavy Metal Detection in Biomatrices Biomethane Production and Palm Oil Mill Effluent Treatment by Co-Cultivation of Nannochloropsis oculata Continuous Heavy Metal Removal from Palm Oil Mill Effluent Using Natural Ceiba pentandra Packed-Bed Column Determination of Antioxidant Activities and Total Phenolic Contents of Three Cyanobacterial Species Starch Biodegradation in a Lignin Modified Slow Release Fertilizer: Effect of Thickness Recent Advances of Using Ionic Liquid in Lignocellulosic Biomass Degradation Mechanical Pretreatment of Lignocellulosic Biomass for Biofuel Production Zinc Removal from Wastewater Using Hydrogel Modified Biochar Photodegradation of Aqueous Diisopropanolamine Using Cu/TiO2: Effect of Calcination Temperature and Duration Chemical Pretreatment Comparison for Oil Palm Empty Fruit Bunch: A Review Application of Experimental Statistical Method in Optimizing Preparation Variables for Cu-Ni/TiO2 Photocatalyst Water Based Paint with Java Citronella Oil as Mosquito Repellent Agent Methylene Blue Removal from Aqueous Solution by Hylocereus undatus (Dragon Fruit) Foliage Effect of Modified MIL-53 with Multi-Wall Carbon Nanotubes and Nanofibers on CO2 Adsorption Preparation of Biodiesel from Waste Cooking Oil Catalyzed by Basic Ionic Liquid Starch Based Soil Conditioner and Slow Release System Bio-Oil Production under Sub- and Supercritical Hydrothermal Liquefaction of Oil Palm Empty Fruit Bunch and Kernel Shell Adsorption of Chlorate from Chlor-Alkali Plant Purged Brine Stream Heavy Metal Removal by Oil Palm Empty Fruit Bunches (OPEFB) Biosorbent Adsorptive Removal of Ni2+ from Aqueous Solution onto Rice Husk-Based Activated Carbon Biodiesel Production from the High Free Fatty Acid “Hevea brasiliensis” and Fuel Properties Characterization Degradation Kinetic of Oxytetracycline Antibiotic inside UV Reactor in the Presence of H2O2 Effect of Nanofillers on the Spreading Behavior of Biopolymer Materials on Urea Surface Effect of Ultrasonic Pre-Treatment Durations on the Formation of Zeolite-T Review on Extraction and Characterization of Castor Seed Oil Optimization of Pectin Extraction from Nephrolepis biserrata Leaves Using Response Surface Methodology Synthesis and Dehumidification Performance of Calcium Chloride Derived from the Waste Shells of Anadaragranosa


Best Sellers


Product Details
  • ISBN-13: 9783038265641
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 625 Applied Mechanics and Materials
  • ISBN-10: 3038265640
  • Publisher Date: 12 Sep 2014
  • Binding: Digital download and online
  • No of Pages: 954


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Process and Advanced Materials Engineering: (Volume 625 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Process and Advanced Materials Engineering: (Volume 625 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Process and Advanced Materials Engineering: (Volume 625 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!