Advanced Materials XII
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advanced Materials XII: (Volumes 510-511 Key Engineering Materials)
Advanced Materials XII: (Volumes 510-511 Key Engineering Materials)

Advanced Materials XII: (Volumes 510-511 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Advanced Materials XII is a compilation of selected peer-reviewed papers. Volume is indexed by Thomson Reuters CPCI-S (WoS). The ever-increasing changes and complexities that characterize the present-day needs of industry have driven a growing demand for technical information on advanced materials. The ultimate aim of this publication is to present the latest information on recent progress, achievements and innovations in the field of advanced materials research and technology. The technical data presented here is likely to aid scientists and researchers working in the field of advanced materials

Table of Contents:
Preface, Committees and Sponsors New Developments in NdFeB-Based Permanent Magnets Computational Model of Phase Transformations in Thermo-Chemical Cathodes Using Kinetic Approach Recent Advances in Fatigue Crack Growth Viscoelastic Response of HTPB Based Solid Fuel to Horizontal and Vertical Storage Slumping Conditions and it's Affect on Service Life High Temperature Oxidation Behaviour of Nickel Based Nanostructured Composite Coatings Surface Modification and Characterization of Bulk Amorphous Materials Structural, Electrical and Dielectric Properties of Nanocrystalline Mg-Zn Ferrites An Inquisitive into the Indirect Measurement and Comparison of the Viscosity of Nanoconfined Polystyrene Nanoparticles Effect of Grain Size and Load Ratio on the near Threshold Stress Intensity Factor during Fatigue Crack Propagation of Dual Phase Steel Cerium Doped Bismuth Based High Tc Superconductor: Synthesis and Study of Superconducting Properties Tempering Response to Different Morphologies of Martensite in Tensile Deformation of Dual-Phase Steel Effects on Structural, Electronic Transport & Optical Properties of Doped & Undoped ZnTe Thin Films for CdTe/CdS Solar Cells The Effect of Double Pass GMAW Process on Microstructure and Mechanical Properties of Aa 6061-T6 Joining Plates Martensitic Transformation and Microstructural Characteristics in Copper Based Shape Memory Alloys Effect of Ageing on Mechanical and Shape Memory Properties of Ti-5Cr-4Ag Alloy A Hierarchical Approach to Purify and Functionalize Pristine Carbon Nanotubes Synthesis of Single and Multi Walled Carbon Nanotubes by Improved Arc Discharge Method Effect of Substrate Temperature on the Structural and Electrical Properties of MBE Grown ZnO Synthesis, Crystallization Behavior and Surface Modification of Ni-Cr-Si-Fe Amorphous Alloy Acoustic Properties of Ho2Si2O7 Single Crystal Investigated by Brillouin Light Scattering Liner Material's Output Characteristics of Explosively Formed Projectiles (EFPs) Characterization of Physical Properties of Thermally Evaporated Doped CdS Thin Films for Photovoltaics Effect of Sintering Temperature on Structural, Electrical and Dielectric Parameters of Mn-Zn Nano Ferrites Synthesis and Thermoelectric Studies in Cr Doped Cobalt Ferrites Nano Particles Optoelectronic Properties of Cadmium Sulfide Thin Films Deposited by Thermal Evaporation Technique Synthesis, Characterization and Hall Effect Measurements of Nanocrystalline ZnO Thin Films Electrical and Dielectric Spectroscopic Characterization of Polycrystalline Dy2Si2O7 Role of Synthesis Parameters on Structural and Electrical Properties of M-Type Hexa-Ferrites Failure of the Pressure Bulkhead of a Passenger Aircraft - A Case Study Effect of Heat Treatment on Deformation Induced Martensite in Austenitic Stainless Steel Microstructures, Electrical and Magnetic Properties of Zn Doped Co Nanoferrites Investigation of Source of N-Type Conductivity in Bulk ZnO Study of Corrosion-Electrochemical Behavior of Aluminum-Beryllium Alloys Alloyed with Yttrium, Lanthanum and Cerium Effect of Zirconium Addition on the Grain Size and Mechanical Behavior of Aluminum Grain Refined by Titanium Plus Boron (Ti+B) in the as Cast and Cold Extruded Conditions Preparation, Structural and Electrical Properties of Nanocrystalline Zr-Mn Cobalt-Ferrite Synthesized by the Co-Precipitation Method Structural and Thermal Characterization of Polymorphic Er2Si2O7 Laser Induced Backside Dry Etching of BK-7 and Quartz in Vacuum Comparative Study of Temperature Dependent Barrier Heights of Pd/ZnO Schottky Diodes Grown along Zn- and O-Faces Preparation and Characterization of Carbon Supported Nano-Nickel and its Sorption Behavior for Zinc from Aqueous Solutions Effect of Cork Loading on Mechanical and Thermal Properties of Silica-Ethylene-Propylene-Diene Monomer Composite An Electrochemical Impedance Spectroscopy Study of Al-Zn and Al-Zn-Sn Alloys in Tropical Seawater A Comparison of the Electrical and Thermal Behavior of ZrO2-Ni Interpenetrating Phase Composite Produced by Microwave and Conventional Sintering Electrical, Dielectrical and Magnetic Properties of Zr-Mn Doped Nano-Ferrites Isotropic and Anisotropic Nanocrystalline NdFeB-Based Magnets Prepared by Spark Plasma Sintering and Hot Deformation Single Step Heat Treatment Cycle for Development of Isotropic Fe-Cr-Co Magnets Influence of Contact Materials on Phenomena in a Short Electrical Arc Anomalous Behavior of Chemically Synthesized Magnetoplumbite Strontium Ferrite Nano Particles Effect of Thermal Treatments on the Structural and Optical Properties of Thermally Deposited Polycrystalline Cu Thin Films Proficient Ni-Zn-Cr Ferrites: Synthesis and Characterization Effect of Sintering Temperature on Nanostructured Multiferroic BiFeO3 Ceramics Effect of Zirconium Addition on Welding of Aluminum Grain Refined by Titanium Effect of Thermal Treatment on Nano-Crystallites and Phase Transformation of CaZrO3Thermal Barrier Coatings Improved Hydrogen Desorption Kinetics of MgH2 Nanoparticles by Using TiC Nanocatalyst Software Development for Specific Geometry and Safe Design of Isotropic Material Multicell Beams Material Selection for Design, Manufacturing and Application Role of Heat Treatment in Magnetic Properties of Fe-Co-Ni-Al-Cu-Ti Alloy Failure Analysis of a Helicopter's Main Rotor Bearing Combustion Characteristics of the Mustard Methyl Esters Resistance Pressure Sensor Based on Ag/Cu2O-PEPC-NiPc/Al Composite Role of Equiaxed Primary Alpha (α׳) and Mechanical Properties of Ti-6Al-4V Alloy Comparison of Structural Properties of Thermally Evaporated CdTe Thin Films on Different Substrates Effect of Strain Rate on Cavity Closure during Compression between Flat Platens Using Superplastic Tin-Lead Alloy SEM Examination and Analysis of the Interface Character in Surface Modified Aramid-Epoxy Composite Variations in Structural and Electrical Properties of Ba-Hexaferrite due to Pb Substitution Synthesis of Phase Pure Strontium Doped Lead Zirconate Titanate Nano Crystalline Powder by Sol-Gel Approach Non-Destructive Evaluation of Plasma Sprayed CaZrO3 Coatings by Eddy Current Technique Effect of Post-Deposition Annealing Treatment on the Structural, Optical and Gas Sensing Properties of TiO2 Thin Films Characterization of Cold Rolled Austenitic Stainless Steel by Ultrasonic Longitudinal Velocity Effect of Vanadium Addition to Aluminum and Aluminum Grain Refined by Titanium on their Chemical Corrosion Rate in Acidic Solution, HCL, at Different Temperatures Correlation of Microstructures with Electrical Transport Properties in Mn Doped Co Nanoferrite Particles Synthesis of Laser Beam Rapidly Solidified Novel Surfaces on D2 Tool Steel Influence of Solid Particle Size on Burning and Mechanical Properties of AP/Al/HTPB Composites Development of Fe-Cr-Co Permanent Magnets by Single Step Thermo-Magnetic Treatment Failure Analysis of Engine Bearing Piezoelectricity in 0-3 PZT-PVDF Nano Composites Prepared via a Modified Solution Casting Process Synthesis and AC Electrical Characterization of Co Doped Bismuth Manganite Nanoparticles Effect of Carbon Black on Curing Behavior, Mechanical Properties and Viscoelastic Behavior of Natural Sponge Rubber-Based Nano-Composites Effect of Air Plasma Spraying Parameters on WC-Co Cermet Coating Plasma Sprayed Alumina Coating on Ti6Al4V Alloy for Orthopaedic Implants: Microstructure and Phase Analysis Influence of Degree of Deformation on Anisotropy in Mechanical Properties in Wrought Magnesium Alloy ZK60 Design of Axially Loaded Helical Spring Isolation Systems Comparative Performance of Locally Made and the Foreign Made Dynamic Compression Plates Investigation of Fiber-Reinforced Modified Epoxy Resin Composites Effects of Sintering Temperature on Structural and Electrical Transport Properties of Zinc Ferrites Prepared by Sol-Gel Route Use of Flexible Engineered Cementitious Composite in Buildings Measurement of Loose Powder Density Permeability Measurement of some Barrier Materials as a Function of Temperature and Pressure Development of APDL Program for Analysis of Composite Material Multicell Beams


Best Sellers


Product Details
  • ISBN-13: 9783038138815
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 510-511 Key Engineering Materials
  • ISBN-10: 3038138819
  • Publisher Date: 14 May 2012
  • Binding: Digital download and online
  • No of Pages: 650


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Materials XII: (Volumes 510-511 Key Engineering Materials)
Trans Tech Publications Ltd -
Advanced Materials XII: (Volumes 510-511 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Materials XII: (Volumes 510-511 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!