Advanced Materials Engineering and Technology II
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advanced Materials Engineering and Technology II: (Volumes 594-595 Key Engineering Materials)
Advanced Materials Engineering and Technology II: (Volumes 594-595 Key Engineering Materials)

Advanced Materials Engineering and Technology II: (Volumes 594-595 Key Engineering Materials)

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Collection of selected, peer reviewed papers from the 2013 International Conference on Advanced Materials Engineering and Technology (ICAMET 2013), November 28-29, 2013, Bandung, Indonesia. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 205 papers are grouped as follows: Chapter 1: Advanced Characterization; Chapter 2: Biomaterials; Chapter 3: Biotechnology and Life Sciences; Chapter 4: Building Materials; Chapter 5: Coatings and Surface Engineering; Chapter 6: Composites and Polymer Materials; Chapter 7: Computational Materials Science; Chapter 8: New Functional Materials; Chapter 9: Optical and Photonic Materials; Chapter 10: Optoelectronics; Chapter 11: Semi-Conductor and Micro-Electronic Materials; Chapter 12: Testing and Evaluation of Materials

Table of Contents:
Preface, Conference Organization and Reviewer List Chapter 1: Advanced Characterization Application of InN Based Quantum Dot in Reducing Short Circuit Current Variation of Solar Cell above Room Temperature Influence of Dolomite on the Mechanical Properties of Boiler Ash Geopolymer Paste Effect of Varying Mixed Refrigerant Composition on Main Cryogenic Heat Exchanger Performance Ionic Liquid Polymeric Membrane: Synthesis, Characterization & Performance Evaluation Investigation on Impact Resistance Foamed Concrete Reinforced by Polypropylene Fibre Characterization of Different Additives of Sintered Cobalt F-75 Alloy in Biomaterial Applications The Behaviours of Steel Fiber as Main Reinfocement in High Performance Slurry Infiltrated Fiber Reinforced Concrete Physical Characteristic of Zn Doped Soft Ferrites MxZn1-x Fe2O4 Preparation and Characterization of Activated Carbon Made from Oil Palm Empty Fruit Bunch The Effect of Hydrochloric Acid on the Surface Area, Morphology and Physico-Chemical Properties of Sayong Kaolinite Clay Effect of Filler Size on Flexural Properties of Calcium Carbonate Derived from Clam Shell Filled with Unsaturated Polyester Composites Effect of Catalyst Calcination Temperature on the Synthesis of MWCNTs-Talc Hybrid Compound Using CVD Method The Effect of Lemongrass as Lost Circulation Material (LCM) to the Filtrate and Filter Cake Formation Synthesis and Characterization of Hematite Nanoparticles as Active Photocatalyst for Water Splitting Application Compressive Strength of Fly Ash Based Geopolymer/Glass Fiber Composite via Filament Winding Microstructure Study on Volcano Ash Geopolymer Aggregate at Different Sintering Temperature The Need to Intensify Research Efforts in the Alternative to Lead Shot Contribution of RHA Granules as Filler to Improve the Impact Resistance of Foamed Concrete The Effect of Inoculation on Properties of Modified Ductile Ni-Resist Alloy Effect of Annealing Atmosphere on the Morphology of Copper Oxide Thin Films Deposited on TiO2 Substrates Prepared by Sol-Gel Process Synthesis and Characterization of Iron Produced from Iron Mill Scale A Study of Liberation and Separation Process of Metals from Printed Circuit Boards (PCBs) Scraps Effect of Pyrolysis Temperature on the Synthesis of Carbon Fiber from Natural Organic Waste On the Fatigue of Shape Memory Alloys On the Structure of Shape Memory Alloys Effect of Fly Ash/Alkaline Activator Ratio and Sodium Silicate/NaOH Ratio on Fly Ash Geopolymer Coating Strength Compressive Strength and Morphology of Fly Ash Based Geopolymer as Artificial Aggregate with Different Curing Temperature Design and Development of Remote Communication System for Mines Detector Robot Carbon Dioxide Separation Using Amine Modified Zeolite in Pressure Swing Adsorption System Eco-Friendly Synthesis of Nanozeolite NaA from Rice Husk Ash and its Efficiency in Removing Ammonium Ions On the Bioremediation Potential of Inhabitant Microbes of Dredged Marine Soils: A Theoretical Framework Physicochemical Properties of Pyrolitic Carbon Black from Waste Tyres Effect of Thickness for Sound Absorption of High Density Biopolymer Foams Chapter 2: Biomaterials Halal Based Sourced EM for Turbidity Reducing in Wastewater Treatment Growth Kinetic of Fresh and Frezee-Dried Pleurotus sajor-caju (Oyster Mushroom) Mycelium for Preservation Study Effect of Beta Tricalcium Phosphate (β-TCP) on Properties of Mg-Zn Composites Potential of Five-Leaved Chaste Tree (Vitex negundo L.) Leaves as Source of Natural Dye from Supercritical Carbon Dioxide (SC-CO2) Extraction Surface Engineered Poly(lactic acid) (PLA) Microspheres by Chemical Treatment for Drug Delivery System Non-Linear Kinetic and Isotherm Modeling on the Adsorption of Lead (II) Ions from Aqueous Solution onto Monosodium Glutamate Functionalised Rubber Leaf Powder Performance Evaluation of Okra (Abelmoschus esculentus) as Coagulant for Turbidity Removal in Water Treatment Potential Use of Biofibers for Functional Immobilization of Lactobacillus rhamnosus NRRL 442 Effect of Oil Palm Empty Fruit Bunch-Grafted-Poly(Acrylic Acid-co-Acrylamide) Hydrogel Preparations on Plant Growth Performance Novel Low-Cost Activated Carbon from Coconut Shell and its Adsorptive Characteristics for Carbon Dioxide The Effect of Copigmentation on the Stability of Butterfly Pea Anthocyanins Preparation and Characterization of Co-HA Powder Using Modified Electroless Method Sintering Effects on Mechanical Properties of Co-Ha Composite Prepared by Modified Electroless Deposition Preparation of Biodegradable Poly(lactic Acid) Electrospun Membrane with Decreased Pore Size by Post Heat Treatment Adsorption Behavior of Methylene Blue on Ethylenediaminetetraacetic Dianhydride Modified Neem (Azadirachta indica) Leaf Powder Anodic Oxidation of Titanium in Mixture of β-Glycerophosphate (β-GP) and Calcium Acetate (CA) Ultrafiltration Formulation of Cellulose Acetate / Polysulfone Blended Membrane Extraction of Phenol and Acetic Acid from Synthetic Bio-Oil by Ammonium Sulfate Solution Sound Absorption of Laminated Biopolymer Foam and Epoxy Foam The Potential of Garlic Extract as Bio-Inhibitor in Urea Fertilizer Solubility of Phoenix dactylifera Seed Oil in Supercritical Carbon Dioxide (Sc-Co2) Using Empirical Model Development of Dense Hydroxyapatite-Ni by Modified Electroless Deposition Technique Effect of Different Nickel Content on the Mechanical Properties of Hydroxyapatite-Ni Composites from Coated Powders Chapter 3: Biotechnology and Life Sciences Monitoring Initial Glucose Concentration for Optimum pH Control during Fermentation of Microbial Cellulose in Rotary Discs Reactor Review on Malaysian and Thailand's Perspective towards Renewable Energy Extraction of Silica from Palm Ash Using Organic Acid Leaching Treatment Materials Research in Appropriate Technology: In the Midst of Science, Engineering, and Technology Design and Optimization of a Monomer Processing Reactor Landfill Leachate Treatment Using SSF-FWS Constructed Wetland Planted with Limnocharis flava and Eihhornia crassipes under Different Hydraulic Loading Rate Methylene Blue Dye Adsorption to Durian Shell Activated Carbon Oil Blends as Biolubricant: Screening of Effect Factors Influence to Basestock High Yield Synthesis of Kojic Ester Using Dual Enzymes System and their Antibacterial Activity Protein Produced by Bacillus subtilis ATCC21332 in the Presence of Cymbopogon flexuosus Essential Oil Fabrication and Characterization of Multiwalled Carbon Nanotubes-Alumina Hybrid Compound: Comparison of Various Supported Catalyst Chapter 4: Building Materials The Effect of Cement Replacement Materials to the Hydration of Petroleum Sludge in OPC Load versus Displacement Validation between Ruaumoko Hysteresis Program and Experimental Work on CFRP Retrofitted Precast Beam-Column Exterior Joint Potential of RHA in Foamed Concrete Subjected to Dynamic Impact Loading Feasibility Study on Composition and Mechanical Properties of Marine Clay Based Geopolymer Brick New Processing Method of Kaolin-Based Geopolymer Brick by Using Geopolymer Brick Machine Effect of Parawood Ash on Drying Shrinkage, Compressive Strength and Microstructural Characterization of Metakaolin-Based Geopolymer Mortar Experimental Investigation of Flax FRP Tube Confined Coconut Fibre Reinforced Concrete Experimental Evaluation of Profiled Steel Sheet Dry Board Wall Panel System Fire Resistance Evaluation of Lightweight Geopolymer Concrete System Exposed to Elevated Temperatures of 100-800 °C A Review on Ductile Self-Compacting Concrete Experimental Analysis of Interlocking Load Bearing Wall Brickool System Influence of Casting Direction on Fracture Energy of Fiber-Reinforced Cement Composites Structural System of Safe House against Tornado and Earthquakes The Utilization of Aluminum Waste as Sand Replacement in Concrete Green Lightweight Concrete Made from Natural Para Rubber Product An Overview of Fly Ash and Bottom Ash Replacement in Self-Compaction Concrete Effect of Coconut Fibers Addition to early Age Unfired Soil Lime Bricks Strength The Application of Brick Wall and Bamboo Reinforced Concrete Frame for Redevelopment of Traditional Houses in Pengotan Village Properties of Lightweight Concrete Composites with Mixture of Fly Ash and Concrete Sludge Aggregate Potential Use of Cameron Highlands Reservoir Sediment in Compressed Bricks Performance of Simplified Damage Assessment Tools for Reinforced Concrete Panels under Blast Loading Structural Lightweight Aggregate Concrete Containing High Volume Waste Materials New Lightweight Construction Material: Cellular Mat Using Recycled Plastic Challenges of Gathering User Requirement in eXtreme Programming Project: A Case Study of Highway Construction Monitoring System Immediate Deflection of Pretensioned Inverted T-Beam with Circular Web Openings Strengthened with GFRP Using Response Surface Methodology Strength - Ultrasonic Pulse Velocity Relationship of Thermally Activated Alum Sludge Multiple Blended High Performance Concretes Compressive Strength and Density of Cementless Unfired Lightweight Brick Utilizing Coal Ash from Coal-Fired Thermal Power Plant Chapter 5: Coatings and Surface Engineering Investigation of Workpiece Positioning Methods for Machining Oil-Pocket on Hip-Implant Spherical Surface Study on Properties and Morphology of Kaolin Based Geopolymer Coating on Clay Substrates Effect of Surface Roughness of Pure Aluminium A1100 on the Cold Work Extrusion by Using Different Angles of Taper Die Chemical Composition Analysis of TiAlBN Nanocomposite Coating Deposited via RF Magnetron Sputtering Modeling of TiN Coating Thickness Using RSM Approach Different Concentration of Al(NO3)3 in ZrO2/Al2O3 Double Layer Coating Steel Prepared by Electrolytic Method Dynamic Contact Angle of Modified Biopolymer Droplet on Urea Surface: Temperature Effects Characteristic and Corrosion Studies of Rare Earth (REE) Based Anodizing on AZ91D Magnesium Alloy Effect on Strength and Hardness of Clay Ceramic Substrate after Treatment Using Koalin Based Geopolymer Glaze Protective CuO Coating Synthesis via Electrodeposition of Copper on AISI 430 Ferritic Steel for SOFC Interconnect Applications Surface Morphology and Corrosion Behavior of Electrolytic Coatings in Different Aqueous Solutions Chapter 6: Composites and Polymer Materials Warpage Analysis with Straight Drilled and Conformal Cooling Channels on Front Panel Housing by Using Taguchi Method Investigation on the Effect of TiO2 Nanofiller to the Structural and Conductivity Characteristics of Poly(vinylidene fluoride-co-hexafluoropropylene)/Poly(ethyl methacrylate) Based Polymer Electrolytes System Structural and Electrical Characterization of Hexanoyl Chitosan-LiClO4-TiO2-DMC Polymer Electrolytes Effects of Trans-Polyoctylene Rubber in Polypropylene/Recycled Acrylonitrile Butadiene/Rice Husk Powder Composites Effect of Empty Fruit Bunch (EFB) Fiber on Mechanical Properties of HDPE/EVA/MMT/EFB Nanohybrid Biocomposite General Lifetime Damage Model for Glass Fibre Reinforced Epoxy (GRE) Composite Pipes under Multiaxial Loading Properties of Fresh and Hardened Glass Fiber Reinforced Fly Ash Based Geopolymer Concrete Natural Rubber/Styrene Butadiene Rubber/Recycled Nitrile Glove (NR/SBR/rNBRg) Ternary Blend: Curing Characteristics and Swelling Test Modification of Pin on Disc Test to Measure Railway Brake Block Friction Coefficient Kenaf Bast-Unsaturated Polyester Composite: The Effect of Different Alkaline Treatment Condition on Tensile Properties The Effect of Chloride Environment on Mechanical Properties Geopolymer Binder with Fly Ash Hexanoyl Chitosan-Polystyrene Blend Based Composite Polymer Electrolyte with Surface Treated TiO2 Fillers Effects of Drilling Generated Heat on Damage Factor in GFRP Low and High Temperature Isothermal Aging Effect on Morphology and Diffusion Kinetics of Intermetallic Compound (IMC) for Sn-Cu-Si3N4 Composite Solder Polyolefin Layered Silicates Nanocomposites – A Review Warpage Analysis between Straight and Conformal Cooling Channels on Thin Shallow Shell Effect of Carbon Nanotubes on the Compression Test and Energy Absorption of Aluminium/Polyurethane-Carbon Nanotubes Foam Sandwich Effect of Chemical Treatment on the Mechanical Properties of Pultruded Kenaf Fibre Reinforced Polyester Composites Ionic Conductivity, Morphology and Transference Number of Sodium Ion in PMMA Based Gel Polymer Electrolytes The Outcome of Sintering Parameters Study toward the Thermal Properties of CuSiC Composite Axial Crushes on Composite Laminated Square Tubes under Compressive Loading Crush Force Efficiency of Composite Square Profile under Off-Axis Loading Tensile and Morphological Properties of Low Density Polyethylene/Spear Grass Composites Effect of Alkali Treatment on Crystalline Structure of Cellulose Fiber from Mendong (Fimbristylis globulosa) Straw Properties of Natural Rubber/Ethylene Propylene Diene Monomer/Recycled Latex Catheter (NR/EPDM/rLC) Ternary Blends: Cure Characteristics and Hardness Structure and Properties of SiC Coated R6M5 High-Speed Steel The Influence of Cure Characteristics and Crosslink Density of Virgin Acrylonitrile Butadiene Rubber/Recycled Acrylonitrile Butadiene Rubber (vNBR/rNBR) Blends Production of Silicon Carbide via Grinding and Heat Treatment Process Rubber Toughened Polyamide 6/High Density Polyethylene/HDPE-g-MAH Nanocomposites with Ethylene Vinyl Acetate Influence of Multilayer Textile Biopolymer Foam Doped with Titanium Dioxide for Sound Absorption Materials Influence of High Doping of TiO2 of Polymeric Foam for Acoustic Study Utilization of Treated Red Meranti Wood Dust as Polymer Foam Composite for Acoustic Study Mixing Optimization of Sn-Cu-Si3N4 via Powder Metallurgy Route for Composite Solder Fabrication Effect Maleic Anhydride Polypropylene on Properties of Calcium Carbonate Filled Polypropylene/Ethylene Propylene Diene Terpolymer Composites Tensile and Morphology Properties of Polylactic Acid/Treated Typha latifolia Composites Effect of Organic Space Holder in Fabrication of Cloced-Cell Aluminium Foam Studies on Sodium Ion Conducting Gel Polymer Electrolytes Removal of Nickel Ions from Aqueous Solution by Polypyrrole Conducting Polymer Lignin Loading Effect on Biodegradability and Nitrogen Release Properties of Urea Modified Tapioca Starch in Wet Soil The Effects of Dynamic Vulcanization in Virgin Polyethylene (vPE)/Recycled Polyethylene (rPE)/Ethylene Propylene Diene Terpolymer (EPDM) Blends: Tensile Properties and Morphology The Influence of CB, Silica and CaCO3 on Tensile and Morphological Properties of vPE/rPE/EPDM Blends Strain Distribution on Reinforcement of Concrete Beams Reinforced with Glass Fiber Reinforced Polymer (GFRP) Bars Conductivity and Dielectric Studies of Methylcellulose/Chitosan-NH4CF3SO3 Polymer Electrolyte The Effect of Methylene Diphenyl Diisocyanate on the Nonisothermal Properties of Polylactic Acid/Elaeis guineensis Fibres Biocomposites Effect of Different Tex Number and Surfacing Veil Application on the Pultruded Kenaf Reinforced Composites (PKRC) under Natural Weathering Exposure Comparison Study in Consolidation of Yttria Reinforced Iron-Chromium Composites Using Conventional and Microwave Sintering Technique Properties of Recycled High Density Polyethylene/Recycled Polypropylene Blends: Effect of Maleic Anhydride Polypropylene Comparison between Single and Multi Gates for Minimization of Warpage Using Taguchi Method in Injection Molding Process for ABS Material Cu-SiCp Composites as Advanced Electronic Packaging Materials Thermal Expansion Behavior of the Electroless Copper Coated Cu-SiCp Composites Fabricated via the Conventional Powder Metallurgical Technique Physical and Morphological Properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) Blends - The Effects of TOR as a Compatibilizer The Effects of Carbon Black and Calcium Carbonate as a Filler on Cure Characteristic and Physical Properties of SBR/CRr Blends High Sensitivity Humidity Sensor Based on ZnSnO3 Composite Nanocube Preparation of Polyethersulfone Ultrafiltration Membrane Surface Coated with TiO2 Nanoparticles and Irradiated under UV Light Effect of Volume Plasticizers on the Thermal Performance of Tacca leontopetaloides Starch Biopolymer Chapter 7: Computational Materials Science Filling Missing Data Using Interpolation Methods: Study on the Effect of Fitting Distribution Evaluation Grain Homogeneity of Aluminium after ECAP Process by ECAP Geometry Analysis Using Taguchi Method Mean Imputation Techniques for Filling the Missing Observations in Air Pollution Dataset Compressive Behavior of AA6061 at Room Temperature and Validation of the FE Model Based on Optical 3D Measurement Technique Photovoltaic Powered Uninterruptible Power Supply Using Microcontroller PIC16F628-I/P Design and Development of Tracking System for Mines Detector Robot Design and Development of Sensing System for Mines Detector Robot Numerical Stress Analysis of Epoxy Adhesively Bonded Dissimilar Joint Experimental Validation on Time Base Analysis of Various Aircraft CFRP Panel Conditions for Structural Health Monitoring Chapter 8: New Functional Materials Estimation of Bioethanol Production from Jatropha curcas Using Neural Network Carbon Powder as Additive in Near-Net-Shaping of Mechanical Components through Warm Forming Route Thermophysical Properties of Ionic Liquid with Thiocyanate and Dicynamide Anions The Fabrication of Codoped ZnO Thin Films by DC Magnetron Sputtering Two-Step Sintering of Fine Barium Cerate-Zirconate Ceramics Electrolyte Newly Developed Starch-Based Hydroxyethyl Cellulose Film with Wide Spectrum of pH-Colour Indicator A Robust Approach for Detecting QRS Complexes of Electrocardiogram Signal with Different Morphologies Influence of Additive on the Performance of Energy Conversion Solar Cell Study on Physical and Chemical Properties of Fly Ash from Different Area in Malaysia Feasibility Study of Waste Motor Recycling through Manual Dismantling and Hydrometallurgical Process Short Term and Long Term Aging Effects of Asphalt Binder Modified with Montmorillonite Sol-Gel Synthesis of Novel Silica Hybrid Xerogels: Porous Studies Sol-Gel Synthesis and Preliminary Characterizations of Novel Silica Hybrid Xerogels Radiation Shielding Characteristics of Concretes Incorporates Different Waste Materials Seismic Performance of Insulated Sandwich Wall Panel Subjected to Lateral Cyclic Loading Chapter 9: Optical and Photonic Materials Enhance the Performance of Free Space Optical (FSO) Communication due to Atmospheric Turbulence via the Dual Diffuser Modulation (DDM) A Tomography System Based on Optical and Electrodynamic Sensors Comparison of Single Mode Fiber and Multimode Fiber in Deployment of SCM-OCDMA in Local Area Network Increasing Capacity and Suppress the Crosstalk by Using Hybrid Optical OFDM/WDM System Chapter 10: Optoelectronics Effective Design for Fiber-to-the-Home Access Network Using Flexible Cross Correlation (FCC) Code Realization of Wavelength-Time Modified Double Weight Codes Optical Code Division Multiple Access System Channel Spacing Effect on SAC-OCDMA System Based Modified-AND Subtraction Detection Scheme Chapter 11: Semi-Conductor and Micro-Electronic Materials Defects Generation in Ge/GeO2 Structure Analysis of Wetting of Perylene Diimide Thin Films-on-Glass by Water Data-Driven Subspace Predictive Control for a MIMO System Characterization of ProTEX® PSB Thin Film as a Photosensitive Layer for MEMS Capacitive Pressure Sensor Diaphragm Based on SiC-on-Si Wafer Chapter 12: Testing and Evaluation of Materials Drop Weight Impact Analysis of Laminated Polyurethane Foam/Cloisite 30B Clay Leachability of Metal Ions in TCLP Leachate of Solidified Petroleum Sludge Determination of Non-Linear Material Constants of RTV Silicone Applied to a Soft Actuator for Robotic Applications Fatigue Crack Initiation and Growth of Aluminum Alloy with Stress Ratio Effects A Study on Relationship between Porosity and Compressive Strength for Geopolymer Paste Wear-Resistance of Nitrided W-Mo-High Speed Steel in Abrasive Wear Conditions Performance of Thermoelectric Cooling System: Effect of Aluminium Heat Sink and Heat Dissipation Effects of Knife Shapes and Cutting Speeds of a Mower on the Power Consumption for Pulverizing Sweet Potato Vine The Effect of Solution Temperature on Electrodeposit-ZnO Thin Film Effect Different Limb of Transformer Core Assemble on Performance


Best Sellers


Product Details
  • ISBN-13: 9783037859377
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1194
  • Spine Width: 60 mm
  • Width: 170 mm
  • ISBN-10: 3037859377
  • Publisher Date: 20 Mar 2014
  • Binding: Paperback
  • Language: English
  • Series Title: Volumes 594-595 Key Engineering Materials
  • Weight: 2150 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Materials Engineering and Technology II: (Volumes 594-595 Key Engineering Materials)
Trans Tech Publications Ltd -
Advanced Materials Engineering and Technology II: (Volumes 594-595 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Materials Engineering and Technology II: (Volumes 594-595 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!