Semi-Solid Casting of Structural Materials
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Semi-Solid Casting of Structural Materials: (Volume 347 Solid State Phenomena)
Semi-Solid Casting of Structural Materials: (Volume 347 Solid State Phenomena)

Semi-Solid Casting of Structural Materials: (Volume 347 Solid State Phenomena)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This special edition is devoted to studying the properties of the semi-solid casting of non-ferrous alloys and corresponding metal matrix composites and will be helpful to metallurgists and engineers from mechanical engineering.

Table of Contents:
Preface Chapter 1: Materials Development and Characterization Variation of Semi-Solid Microstructure and Mechanical Properties of Mg98.5Ni0.5Y1.0 Alloy with Solidification Pressure Heat-Treatment Characteristics and Structure-Property Relationships of Thixomolded AZ91 and Ultralight LAZ771 Magnesium Alloys Fatigue Properties of Thixoformed Al-6wt%Si-2.5wt%Cu Comparison of Solidification Microstructure Evolution of Al-10Si and Recycled Aluminium Beverage Can Strips Made in a Strip Caster Characterisation of Residual Stresses of Rheocast Al Alloy Influence of Reinforcement Particle Parameters on the Homogeneity of Particle Distribution in Semi-Solid Formed Aluminium Matrix Composites Mechanical and Microstructural Investigations on a Symmetric Mould Processed with Semi-Solid Aluminum RheoMetalTM: Analysis of the As-Cast Proprieties A Comparative Study on Microstructure, Mechanical Property, and Electrical Conductivity of Al-7Si-0.6Mg Alloy Produced by High Pressure Die Casting and Semisolid Die Casting A Comparison of Microstructure and Casting Defects of Rheocasting and Thixocasting Al-Si-Mg Alloy Effect of Mn Addition on Microstructure, Mechanical Properties and Die Soldering of Rheocasting Al-7Si-0.3Mg Alloys Abrasive Wear Properties Evaluation of the Thixoformed A380/NbC Composite Preliminary Investigation on the Use of Recycled A356 Alloy for Semi-Solid Processing Semi-Solid Casting of AlN Reinforced Mg-Matrix Composites and their Thermophysical Properties Development of High Strength and High Thermal Conductivity Semi-Solid Magnesium Alloy by Thixomolding Process Rheological Behaviour of Secondary AlSi7Mg Alloy for Semi-Solid Processing Effect of Ingate Length on Microstructure and Properties of Semi-Solid Squeeze Casting CuSn10P1 Alloy Microstructure Evolution during Cooling Slope Rheoprocessing of Novel Al-15Mg2Si-4.5Si Composite Evolution of Microstructure and Mechanical Properties of the Rheo-Diecast Mg-12Gd-3Y-1Zn-0.4Zr Alloy during Heat Treatment Chapter 2: Rheology, Modelling and Numerical Analysis Rheological Behavior in the Semisolid State of Al-Si-Cu Alloys Produced by ECAP Numerical Simulations of the Squeeze Flow of Thixotropic Semisolid Slurries Semi-Solid Deformation Behavior, Flow Stress Prediction and Deformed Microstructure of GH3536 Superalloy On the Possibility of Replacing Scheil-Gulliver Modeling with Machine Learning and Neural Network Models Rheological Modeling of 7075 Aluminum Alloy Semi-Solid Slurry and its Application in the Simulation of SEED Rheocasting Process CALPHAD Optimization of the Composition of EN AC-46000 Secondary Alloys for Semi-Solid Casting Processes Comparison of Rheological Models to Simulate Die Filling Process of A356 Semisolid Alloy Thixomolding of Magnesium - Efficient Process Industrialization by Combining a Digital Twin and Systematic Casting Trials Quality Control of Semi-Solid Die Casting by Filling Pressure Based on Machine Learning Method A Molecular Dynamics Study of Nucleation and Grain Growth of Novel Al-15Mg2Si-4.5Si Composite during Rapid Cooling Based Semi Solid Slurry Preparation


Best Sellers


Product Details
  • ISBN-13: 9783036413846
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 347 Solid State Phenomena
  • ISBN-10: 3036413847
  • Publisher Date: 24 Aug 2023
  • Binding: Digital download and online
  • No of Pages: 218


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Semi-Solid Casting of Structural Materials: (Volume 347 Solid State Phenomena)
Trans Tech Publications Ltd -
Semi-Solid Casting of Structural Materials: (Volume 347 Solid State Phenomena)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Semi-Solid Casting of Structural Materials: (Volume 347 Solid State Phenomena)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!