Materials for Energy Storage and Conversion: (Volume 950 Key Engineering Materials)

This special edition contains articles on the latest research results on materials properties used in devices for energy storage and energy conversion and for power electronics production. Without any doubt, this specialised publication will be useful to professionals in the field of design and production of the aforementioned devices.

Table of Contents:
Preface Chapter 1: Materials for Energy Storage and Conversion Synthesis of TiO2 Nanofiber as Photoanode of Dye Sensitized Solar Cells (DSSC) Biopolymer Kappa Carrageenan with Ammonium Chloride as Electrolyte for Potential Application in Organic Battery NaFePO4 Particles as a Cathode of Sodium Ion-Battery via Sol-Gel Method: A Review on Synthesis Performance Improvement of Dye-Sensitized Solar Cells Using a Combination of TiO2 and ZnO as Photoanodes A Rapid Synthesis of Zeolitic Imidazolate Framework-14 Cobalt (ZIF-14 Co) for Surface Modification of LiFePO4 as Lithium‑Ion Battery Cathode Material Ferrofluid Mn0.5Zn0.5Fe2O4 as Harvesting Energy: Preliminary Study Photovoltaic Characteristics of the a-C/a-C:B Homojunction from Palmyra Sugar with Nano-Spray Method Characterization and Performance Evaluation of Yttria-Stabilized Zirconia (YSZ) Thickness on ZnO Nanorods-Based Photoelectrochemical Cell The Effect of Ni Doping Variations on the Microstructure and Conductivity of LiNixFe1-xPO4/C Composite Materials Carbonization at Varying Temperatures of PVA-Derived Nanofibers Fabricated by Electrospinning Microstructural Property Investigation of LSM-4Sc4YSZ Novel Composite Electrode Prepared Using All-Alkoxide Sol-Gel and Solid-State Reaction Methods for Solid Oxide Electrochemical Cells Thin Film Fabrication and Characterization of LSM-YSZ/YSZ Half-Cell for Solid Oxide Electrolysis Cell via Screen-Printing Screen-Printing of NiO-ScSZ on YSZ Substrate Using Solid-State Reaction and Glycine-Nitrate Process Precursors for Solid Oxide Electrochemical Cells Quasi-Solid State Polymer Electrolytes Based on PVdF-HFP Host Polymer for Sodium-Ion Secondary Batteries Hierarchical Nitrogen Nanoporous Carbons by Surfactant-Assisted Synthesis of Zeolitic-Imidazolate Frameworks for High Performance Supercapacitor Chapter 2: Power Deviсes Designing The Gate Oxide Breakdown Failures of 4H-SiC MOS Devices Simulation of Threshold Voltage Instability of 4H-SiC MOSFET The Investigation of 1200V SiC MOSFET Short-Circuit Ruggedness and Turn-Off Current Tail Factors Affecting Bias Temperature Instability in 4H-SiC MOS Capacitors Reaction Kinetics Investigation of Ni Ohmic Contacts on N-Type 4H-SiC Influence of Acceptor Incomplete Ionization in p+ Emitter on SiC LTT with n-Type Blocking Base Structure and the Thermal Management of a 3-D Silicon Carbide MOSFET Module Automatic Design of a Busbar in SiC Controller