Superplasticity in Advanced Materials - ICSAM 2018 - Bookswagon
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Industrial chemistry and manufacturing technologies > Other manufacturing technologies > Superplasticity in Advanced Materials - ICSAM 2018: (Volume 385 Defect and Diffusion Forum)
Superplasticity in Advanced Materials - ICSAM 2018: (Volume 385 Defect and Diffusion Forum)

Superplasticity in Advanced Materials - ICSAM 2018: (Volume 385 Defect and Diffusion Forum)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This volume includes selected and peer reviewed papers presented at the 13th International Conference on Superplasticity in Advanced Materials (ICSAM 2018), August 19-22, 2018, St. Petersburg, Russia. We hope this collection will be interesting and useful for many specialists whose scientific and engineering activity is related to the area of superplastic materials, research of the mechanisms of superplasticity and superplastic processing technologies.

Table of Contents:
Preface Chapter 1: Fundamentals of Superplasticity Thirty Years of Superplastic Ultrafine-Grained Materials: Examining the Legacy of Oscar Kaibyshev Superplastic Flow and Micro-Mechanical Response of Ultrafine-Grained Materials Superplasticity of Friction-Stir Welds of Zr-Modified 5083 Aluminum Alloy with Ultrafine-Grained Structure Mechanical Behavior of Twinning Induced Plasticity Steel Processed by Warm Forging and Annealing On the Nuances in the Power Law Description and Interpretation of High Homologous Temperature Creep and Superplasticity Data Mesoscopic Scale Modeling of "Superplastic" Flow in Geological and Glacial Materials Superplasticity of Aerospace 7075 (Al-Zn-Mg-Cu) Aluminium Alloy Obtained by Severe Plastic Deformation Arrhenius-Type Constitutive Equation Model of Superplastic Deformation Behaviour of Different Titanium Based Alloys Effect of Ultrasonic Treatment on the Characteristics of Superplasticity of Titanium Alloy Ti-6Al-4V Low Temperature Superplasticity in Ultrafine-Grained AZ31 Alloy Mechanisms of Superplasticity in Titanium Alloys: Measurement, In Situ Observations and Rationalization Room Temperature Superplasticity in Fine/Ultrafine-Grained Zn-Al Alloys with Different Phase Compositions On Dynamic Superplasticity of Aluminum Alloys with Initial Varying Grain Size Structure Effect of Homogenization Treatment on Superplastic Properties of Aluminum Based Alloy with Minor Zr and Sc Additions Tensile Properties of AZX612 Magnesium Alloy Sheets Processed by Friction-Assisted Extrusion Influence of Structural-Phase State on Low-Temperature Superplasticity of Ultrafine-Grained Titanium Alloys Study on the Enhanced Superplasticity of Mg-Li Based Alloy by a Stepped Deformation Method Superplastic Deformation Behavior of As-Received and Hydrogenated Ti2AlNb Alloy Superplasticity of Al-Mg-Zr Alloy On Mechanisms of “Grain Boundary Sliding”, in Light of the Kaibyshev-Valiev Data on Two Limit “Non-Equilibrium” GB States in Deformed Metallic Materials Continuous Dynamic Recrystallization in Dual-Phase Titanium Alloy in Superplasticity Superplastic Behavior of B- and Gd-Containing β-Solidifying TiAl Based Alloy Superplasticity in Fine Grain Ti-6Al-4V Alloy: Mechanical Behavior and Microstructural Evolution Microstructure Evolution and Properties of Ti-6Al-4V Alloy Doped with Fe and Mo during Deformation at 800°C Low-Temperature Superplasticity of the Ni-Based EK61 Superalloy and Application of this Effect to Obtain Sound Solid Phase Joints Local Accommodation Processes of Superplastic Grain Boundary Sliding: Their Direct Observation in Two-Dimensional Grain Boundary Sliding Chapter 2: Ultrafine-Grained Materials Molecular Dynamics Simulation of Nonequilibrium Grain Boundaries in Ultrafine-Grained Nickel and their Relaxation under Cyclic Loading Microstructure Evolution and Mechanical Behavior in Shape Memory Nanostructured TiNi Alloy Thermodynamics of FeS-PbS-In2S3 and Properties of Intermediate Phases Effect of Different Initial Lamellar Plate Thicknesses on Grain Refinement and Superplastic Behaviour in HPT-Processed Ti-6Al-4V Alloy Effect of Initial Microstructure on Grain Refinement and Enhanced Low Temperature Superplaticity in Friction Stir Processed Ti-6Al-4V Alloy Influence of Stacking Fault Energy on Microstructure Formation and Strength Properties of Cu-Zn Alloy Atomic Force Microscopy Studies of Severely Deformed Amorphous TiNiCu Alloy In Situ Observation of the Phase Transformations in Ti15Mo Alloy Deformed by High Pressure Torsion Hydrogen Effect on the Creep of Titanium Alloy of the Ti-Al-V System Phase Composition and Properties of Magnesium-Ceramic Composites after High Pressure Torsion Microstructure Homogeneity in AA6063 Alloy Processed by Cyclic Expansion Extrusion The Effect of Ultrafine-Grained Structure of Al-30Zn on the Shape Forming Ability at Sheet Metal Forming Fully Coupled Two-Phase Composite Model for Microstructure Evolution during Non-Proportional Severe Plastic Deformation Variability of Twin Boundary Structure in Computer Simulations of Tensile Twins in Magnesium Comparative Study of the Ultrafine-Grained Structure 316L Stainless Steel and Ti-6-4 Alloy Produced by Selective Laser Melting Mechanical Properties of Multi-Directional Forged Al-7Si-4Zn-3Cu Alloy Analytical Modeling of Strength and Electrical Conductivity of Nanostructured Cu-Cr Alloys Evaluation of Wear Resistance of Copper at Sliding against TiC Based Coatings under Load Effect of Grain Refinement on the Elemental Composition and Nanohardness of the Surface Layers in AISI 316L Austenitic Steel Subjected to Ion-Plasma Hardening Influence of Temperature of Severe Plastic Deformation and Aging on Microstructure, Mechanical Properties and Electrical Conductivitiy of the Cu-Cr-Zr Alloy Thermal Stability of Microstructure and Properties of Cu-0.5Cr-0.2Zr Alloy Subjected to ECAP and Cold Rolling Influence of Inhomogeneity on Mechanical Properties of Commercially Pure Titanium Processed by HPT Effect of ECAP Prior to Aging on Microstructure, Precipitation Behaviour and Mechanical Properties of an Al-Cu-Mg Alloy Influence of High Pressure Torsion on Thermoelastic and Thermoelectric Response of Pure Copper and Aluminum under Pulsed Laser Radiation Novel Method of Severe Plastic Deformation - Continuous Closed Die Forging: CP Aluminum Case Study Microstructure and Mechanical Properties of an Ultrafine Grained Medium-Mn Steel Analysis of the Evolution of Mechanical Properties of Metallic Materials by AMD-Methods for Thermomechanical Impacts Multiple Shear Bands in Zr-Based Bulk Metallic Glass Processed by Severe Plastic Deformation On the Hierarchy of Structural-Phase States of 1561 Aluminum Alloy Enhanced Strength and Ductility of an Ultrafine-Grained Ti Alloy Processed by HPT On Primary Recrystallization of High-Mn Austenitic Steels Annealing Behavior and Kinetics of Primary Recrystallization of Copper Friction Stir Processing Trials of SP-700 (Ti-4.5Al-3V-2Fe-2Mo) Titanium Alloy Effect of Pre-Strain Rolling on Annealing Behavior of Friction-Stir Welded AA6061-T6 Aluminum Alloy Friction-Stir Welding of Work-Hardened Al-Mg Alloy with Nanoscale Particles Effect of Pre-Straining Method on Mechanical Properties of Thermo-Mechanically Processed Al-Cu-Mg Alloy Chapter 3: Design, Testing, Modeling and Application Solution Treatment Process of Haynes 230 Cylindrical Blank Used for Hot Flow Spinning On the Effect of the Complexity of the Constitutive Model in Simulating Superplastic Forming Increase of the Elasticity and Strength of the Welded Joints for the Al-Mg-Li Alloy Made by the Laser Welding by Means of the Thermal Mechanical Processing Numerical and Experimental Investigation on the Hybrid Superplastic Forming of the Conical Mg Alloy Component Establishment of the High Temperature Constitutive Relationship of the Haynes 230 Ni-Based Superalloy Tensile Deformation Behaviors of Aluminum Alloy 2219 at High Temperatures from 415°C to 515°C Simulation and Experiment Investigation on Superplastic Forming/Diffusion Bonding Process of a Ti-6Al-4V Alloy Rear Fuselage Part Mechanical Behavior of Ti-6Al-2Sn-4Zr-2Mo Titanium Alloy under Hot and Superplastic Forming Conditions: Experiment and Modeling Studies on Titanium Alloys for Aerospace Application Microstructure Evolution of Nickel-Based Superalloys Induced by Thermomechanical Processing - Simulation and Verification Influence of Oblique Edge Blanking on the Online Punching Quality after Stretch Bending Formability Analysis on Superplastic Forming of AZ91 Magnesium Alloy Sheet Characterization of Stress-Strain Behavior of Superplastic Titanium Alloy by Free Bulging Tests with Pressure Jumps Simulation of Deformation Behavior and Microstructure Evolution during Hot Forging of TC11 Titanium Alloy FEM Simulation of Influence of Asymmetric Cold Rolling on Through-Thickness Strain Gradient in Low-Carbon Steel Sheets Modification of the Shear-Compression Specimen and Development of a Special Technique for the Physical Simulation of Asymmetric Rolling with a Large Strain Research on Quick Superplastic Forming Technology of Industrial Aluminum Alloys for Rail Traffic


Best Sellers


Product Details
  • ISBN-13: 9783035733457
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 385 Defect and Diffusion Forum
  • ISBN-10: 3035733457
  • Publisher Date: 20 Jul 2018
  • Binding: Digital download and online
  • No of Pages: 494


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Superplasticity in Advanced Materials - ICSAM 2018: (Volume 385 Defect and Diffusion Forum)
Trans Tech Publications Ltd -
Superplasticity in Advanced Materials - ICSAM 2018: (Volume 385 Defect and Diffusion Forum)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Superplasticity in Advanced Materials - ICSAM 2018: (Volume 385 Defect and Diffusion Forum)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!