Materials Science and Metallurgical Technology II
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Materials Science and Metallurgical Technology II: (Volume 989 Materials Science Forum)
Materials Science and Metallurgical Technology II: (Volume 989 Materials Science Forum)

Materials Science and Metallurgical Technology II: (Volume 989 Materials Science Forum)

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

This volume contains papers which were presented at the International Russian Conference on Materials Science and Metallurgical Technology(RusMetalCon-2019, October 1-4, 2019, Chelyabinsk, Russian Federation) and are devoted to discussion of the latest achievements in the field of material science and metallurgical technologies: design, synthesis and characterization of material, pyrometallurgical processes, foundry production, welding, metal forming, additive manufacturing. We hope this collection will be useful and interesting for many researchers and engineers from industrial enterprises.

Table of Contents:
Preface Chapter 1: Properties, Synthesis and Processing of Materials Thermodynamic Modeling of Phase Equilibria in the FeO-MgO-Al2O3 System The Influence of Heat Treatment on the Quality of Vehicle Component Parts Made of Rigid Polyurethane Foam The Research of Service Characteristics of Up-to-Date Packaging Material for Metal Products Failure Analysis of the Propylene Parts Used in Trucks Studying of Causes of Destruction of the Main Gas Pipeline Structural-Phase Analysis of the Titanium Niobium System Formed by Electro-Explosive Method on the Titanium Implant Surface Examining of Solid and Liquid Industrial Copper Blanks with Purpose for Quality Control in Respect of Defects of Technological Origin Use of Nonferrous Metallurgy Waste: Clayey Portion of the Zircon-Ilmenite Ore Gravity Tailings and Pyrite Cinders in Tile-Making Innovative Approaches to Using Kazakhstan’s Industrial Ferrous and Nonferrous Tailings in the Production of Ceramic Materials The Properties of Steel 42HMFA after Hardening and Toughening Short-Range Order in Fe-Cr Alloys: Lattice Monte Carlo Modelling Staged Local Dissolution of Stainless Steel in Chloride Solutions Changes in the Structure of Steel during Quenching in a Magnetic Field Study of Sorption of Manganese (II) Cations by Composite Sorbent The Solubility of Gd2O3 in K Cl-GdCl3 Melts The Influence of a Magnetic Field on Skin Effects Lubricated by Magnetic Lubricants Study of the Process of Heavy Metals Cations Mineralization by Poly-Component Structures Based on Calcium and Magnesium Silicates Stability of Strength Characteristics of Hardened by Deformation AMg6 Alloy during High-Speed Heating Model of Electro-Pulse Processing of Metals Melts Research on Obtaining Silica Xerogels from Nepheline and Study of some of their Physical and Chemical Properties Patterns of Fracture Initiation in Metallic Materials with a Heterogeneous Structure under Dynamic Cyclic Loading The Research of Heat-Resistant Layer Defects Formed during the Surfacing of Nickel Alloy on the Exhaust Valve Chamfer Structure, Texture and Mechanical Properties through the Section of the Hot-Extruded Tube of Titanium Alloy PT-1M The Morphology of Carbide and Nitride Coatings on Steels after Laser Irradiation Investigation of Nitrogen Containing Austenitic Stainless Steel Thermo-Physical Parameters Determination of Nano-Crystalline Fe72.5Cu1Nb2Mo1.5Si14B9 Alloy for Twisted Magnetic Cores Heat Treatment Optimization Selection Principles and Investigation of Substances for Synthesis of Composite Medium-Temperature Phase Change Materials for Space Heating and Domestic Hot Water The Microstructural Peculiarities of Beryllium Bronze after Heat Treatment Microstructure and Mechanical Properties of the Alloy Mg61Cu28Gd11 in Submicrovolumes Controlling the Properties of the Surface Layers of Parts by Forming Regular Micro-Reliefs A Study of Porosity of Products Sintered from BrS30 Alloy Electro-Erosion Powders The Effects of Alkaline Earth Metals on the Structure of Sodium Borosilicate Glasses: 11B and 29Si NMR Study Kinetics of Structural Changes in Strontium Hexa-Ferrite Powder during Milling in Beater Mill Thermodynamic Modeling of Phase Equilibria in the FeO-Al2O3-Cr2O3 and MgO-Al2O3-Cr2O3 Systems Morphology of ZnO Films Fabricated by Electrochemical Oxidation of Metallic Zn High-Temperature Ferromagnetism of Zn1-xMnxOy Thin Films Synthesized by Pulsed Laser Deposition Features of Tri-Calcium Silicate Formation Suppression by Sulphur and Possible Ways of its Preventing Features of Zinc Extraction from Sulfide Forms The Research and Simulation (Modelling) of the Destruction of a Single Abrasive Particle during Waterjet Cutting Study of the Adhesion Strength of the Coating with Different Coating Methods to the Surface of Parts of «Shaft» Type The Identification of the Mineralogical Composition of Converter Slags on the Basis of Testing and Diagnostics Effect of Chemical Composition of Glassy Phase of Porcelain Stoneware on Product Brittleness Effect of Hydrogen Absorption on the Composition of the Amorphous Alloys Surface Layers Investigation of CaSO4-KPO3-Na2B4O7 System as a Basis for Synthesis of Low-Melting Glasses Used as a Glass-Solder Material The Influence of Temperature and Deformation Ratio on Structure Formation and Physico-Mechanical Properties of Powder Materials Experimental and Numerical Investigation of the Catalytic Gas Carburization of Steel The Study of the Complex Mechanical Properties of Rolled Bars of VT6 Alloy as a Function of Chemical Composition and Structure Type Effect of the Lattice Parameter on Brittle Fracture of Metals at Low Temperatures Features of Laser Treatment of Corrosion-Resistant Steels of Austenitic and Carbide Classes Statistical Analysis of Grain Structures Formed by Solid-State Diffusion at Annealing Regulation of the Properties of Construction Composites Depending on the Material Composition Cavitation Erosion-Corrosion Behavior of Fe-Cr Steel Induced by Ultrasonic Vibration Surface Electric Arc Hardening of Low-Carbon Steels Microstructure and Mechanical Properties of the Heat Treated Hy-TUF Steel The Effect of Manganese-Containing Pigment on the Strength of Ceramic Bricks Influence of Homogenization Heat Treatment and Cooling Modes on Microstructure of AA7475 Aluminum Alloy Ingot The Creation of Multicomponent Octahedral Crystals with Spinel Structure Using Solid-Phase Synthesis in the Al2O3-BaO-CuO-Fe2O3-Mn2O3-NiO-SrO-TiO2- ZnO and Al2O3-BaO-CuO-Fe2O3-NiO-SrO-TiO2-WO3- ZnO Systems The Chemical Reactivity Comparison of High-Modulus and High-Strength Carbon Fibers Prediction of Fracture Toughness of Steels According to the Microstructure and Chemical Composition RETRACTED: Studies of the Electrodynamic Parameters of a Powdered Material Depending on the Fractional Composition in the Frequency Range of 8-12 Ghz Peculiar Properties of Temperature Modification of Carbonate Precipitate The Influence of Hardening Curve on the Shape and Size of the Neck of Specimen in Tensile Test Chapter 2: Technologies of Pyrometallurgical Processes Objective Laws of Nitrogen Removal in the Vacuum Tank Degasser Removal of Copper from the Sulphide Copper Smelting Waste Slag Mathematical Modeling оf the Silicon Production Process from Pelletized Charge Improving the Efficiency of Steel De-Oxidation at the Ural Steel Research for the Processing of Stale Slag from the Ural Region by the Pyro-Metallurgical Method Non-Metallic Impurities in Continuous Cast Billets Optimization of Siderite Ore Sintering Operation Conditions Technologies Development for Thermo-Temporal Melt Processing in Order to Improve the Quality of Metal Products The Metallurgical Characterization of Iron-Containing Concentrate Research on Siderite Ore Reducing Firing Kinetics of the Natural Wolframite Interaction with Sodium and Potassium Carbonates Study of Sulphatizing Roasting Process Using Iron Sulphates for the Treatment of Zinc Leach Residue Silver-Containing Concentrate Processing Thermal Properties of High-Magnesia Oxidized Nickel Ore Analysis of the Engineering Process of Reforming Dead Catalysts for the Extraction of Platinum Group Metals Prospects for the Use of Hollow Electrodes for Deep Desulfurization of Steel in the Ladle-Furnace Unit Single Pellet Heating in Natural Gas Combustion Products in Mixture with Air and Oxygen Specific Features of Thermal Performance of the Arc Steel Furnace in Unstable Properties Conditions of Burden Materials Forming and Utilizing Ferrochromium Production Waste Reduction Smelting of Iron-Manganese-Ree Ores of the Tomtor Deposit Thermodynamic Model of Silicon Smelting in Ore-Smelting Furnaces A Study of Nickel and Iron Reduction Silicothermic Process by Thermodynamic Simulation Chapter 3: Technologies of Hydrometallurgical Processes Studies on Hydrometallurgical Treatment of Oxydized Gold-Bearing Copper Ore Optimization of Alkaline Sulfide Leaching of Gold-Antimony Concentrates Mechanochemical Processes in the System “Titanium - Heptane” during Ball Milling Investigation of Flotation Separation of Elemental Sulfur and Sulfides from Lead Sulfate from Low-Temperature Leaching of Lead Concentrates Gold Cementation by Dendritic Zinc Powders in Percolation Mode Perspective Method for Regeneration of Spent Solutions from Printed Circuit Boards Etching Selective Acid Leaching of Copper and Zinc from Old Flotation Tailings Uranium Bioleaching from Low Grade Ore Fine Gold Extraction Problem from Industrial Sludge Anodic Dissolution of Non-Ferrous Metals in a Glycerate-Alkali Electrolyte Chapter 4: Modern Approaches in Foundry Production Structural Changes in the Aluminum - Magnesium System Alloy Development of Cryptocrystalline Graphite Desulfurization Methods Improving the Quality of Production of Sand Core on Core Shooting Machines Assessment of Mold Filling Rate Influence on Amount of Oxide Films in Castings by Numerical Simulation Production Technology of Synthetic Iron to Ensure the Efficiency of Casting Production Chapter 5: Research and Development of Metal Forming Technologies Improvement of Process Parameters Calculation for Coil Rolling at the Steckel Mill The Numerical Mathematical Modeling of Gradient Hardening Processes under Conditions of Complex Local Loading of the Center of Deformation Mechanics of the H-Beam Rolling in the Universal Beam Groove Rolls Geometry Calculating Mathematical Model for Rotational Bar Surface Drawing Investigation into the Flanging Process with Minimal Thickness Variation Residual Stresses of Round Steel Rod at Elastoplastic Twisting Shot Blasting Process Schematization for Rollers Using Slip-Line Method Role of Surface Roughness in the Interlayer Boundary Formation during Manufacturing of Clad Metal Composites Forecasting Increase of Quality of Large-Sized Forgings Used for Stamping, Piercing, and Rolling of High-Duty Products Investigation of Plastic Properties of Ø8 Rod Made of Fire-Refined Copper of Kmor Grade The Ways of Reaching the Specified Mode of Testing Samples for Torsion with Variable Strain Rate The Optimal Content of Liquid Glass in the Raw Material Mixtures in the Briquettes Production Computer Simulation of Micro-Mechanic in Pearlitic Steel Wire Drawing Application of Statistical Representation of Microstructure during Simulation of Ferritic-Pearlitic Steel Wire Drawing Experience of Hot Pack Rolling Application for Production of Specific Steels or Creep Resistant Alloys Kinematic and Dynamic Conditions in Metal Rolling of Porous Materials Mathematical Model of Temperature Conditions of Sheet Mills with Furnace Coilers Chapter 6: Technologies of Welding Production Investigation of the Effect of Welding Heat Input and Focal Distance of Laser Beam on Penetration Depth and Dynamics of Welding Pool Using a High-Speed Video Camera Regularities in Bimetal Joint Formation at Explosion Welding with Simultaneous Stamping Research the Effect of Stress-Pulse Regulation on the Process of Manual Arc Welding Technological Plates Made of AMg6 Alloy Sheet Material 4mm Thickness Development of Technology for Welding Repair of Steel Housings Using a Combination of Ultrasonic Vibrations and Forced Cooling Analysis of the Formation of Welded Joints from Non-Ferrous Alloy The Selection of Parameters for Automatic Welding of the Nuclear Reactors Pipelines Automated Orbital Welding of Carbon and Low-Alloy Steels Pipelines with Small Diameter Chapter 7: Technologies for Plasma Processing of Materials Study of the Processes of High Temperature Material Heating for Plasma Recycling Effect of the Gas-Vortex Stabilization Method on the Plasma Cutting Quality Influence of Electrolyte-Plasma Hardening Technological Parameters on the Structure and Properties of Banding Steel 2 Research of Electrolyte Plasma Treatment Impact on Wear Resistance and Roughness of 18HN3MA-SH Steel Chapter 8: Additive Manufacturing Obtaining and Research of Additive Products from Electro-Erosive Cobalt-Chrome Powders Studying Gas-Phase Flows in the Laser Exposure Zone during Selective Laser Melting Rheological Properties and Microstructure of PH1 Stainless Steel Produced by Selective Laser Melting Influence of the Powder Particle Size on the Denudated Zone Width at Selective Laser Melting Investigation of Mechanical Properties of Anisotropic Materials Used in Rapid Prototyping Technologies Improvement of Composite Filaments for Extrusive 3D Printing The Roughness of the Contact Surfaces of Plastic Cylindrical Gears with a Circular Tooth during Additive Shaping Directed Energy Deposition Heat-Resistant Nickel Alloy with Vibration Assisted Selective Laser Melting of Stainless Steel with Subsequent Processing Numerical Simulation of the Selective Laser Melting Process Using the Example of a Turbine Blade Finite Element Simulation of Cellular Structure Built from Orthogonal Cylindrical Struts


Best Sellers


Product Details
  • ISBN-13: 9783035715767
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 890
  • Spine Width: 45 mm
  • Width: 170 mm
  • ISBN-10: 3035715769
  • Publisher Date: 04 Jun 2020
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 989 Materials Science Forum
  • Weight: 1620 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Materials Science and Metallurgical Technology II: (Volume 989 Materials Science Forum)
Trans Tech Publications Ltd -
Materials Science and Metallurgical Technology II: (Volume 989 Materials Science Forum)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Materials Science and Metallurgical Technology II: (Volume 989 Materials Science Forum)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!