Materials Engineering and Technologies for Production and Processing V
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Materials Engineering and Technologies for Production and Processing V: (Volume 299 Solid State Phenomena)
Materials Engineering and Technologies for Production and Processing V: (Volume 299 Solid State Phenomena)

Materials Engineering and Technologies for Production and Processing V: (Volume 299 Solid State Phenomena)

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

This volume contains papers presented at the 5th International Conference on Industrial Engineering (ICIE) that was held on 25-29 of March 2019, Sochi, Russian Federation. The edition reflects recent advances in the field of materials science, metallurgical and metalworking technologies, surface engineering, and coatings. We hope this collection will be useful for many engineers and researchers from various branches of industry.

Table of Contents:
Preface Chapter 1: Polymers, Composites, Functional and Building Ceramics Kurgan Clays in the Production of Ceramic Materials Activity of Zinc Oxide Based Spinels Catalytic Peculiarities of Heat and Mass Transfer in Porous Moistened Mediums at High Thermal Loads Mathematical Modeling of High-Energy Pressing Process of Graphite-Plastic Composition Improving Construction Engineering Properties of Soils Stabilized by a Cement Binder with Techno-Genic Products Improvement of Strength Parameters of Foam Ceramics for Energy-Efficient Enclosing Structures Modeling of the Transition Layer in Ceramic Matrix Composites from Coal Wastes and Clay Determination of Rational Technological Parameters of Co-Extrusion Processing of Secondary Polymeric Materials by the Method of Physical Modeling Receiving Composite Sorbents for Sewage Treatment on the Basis of Waste of Production and Processing of Micaceous Quartzite Improving the Fungus Resistance of Polymer Composites Techno-Genic Fillers in the Composition of Modern Polymer Paints Study of the Influence of Heat Treatment on the Structure and Properties of Aluminum-Copper Multilayer Systems Influence of Plasticizers on the Properties of Fine-Grained Polymer Concrete Analysis of Electron Density Distribution in the CuAlO2 System Properties of Epoxy-Diane Composites Modified by Techno-Genic Fillers Quartzitic Waste, as the Possible Component of the Cement Flooring Composite Material Investigation of Novel Polymer Composites Based on Recycled Multilayer Combined Packaging Materials Formation and Corrosion Behavior of Nickel/Alumina Nanocomposites Reaction of Spot Radioactive Source with the Energy of 661.7 KeV on the Modification in the Structure of Surface Layer of Metal Composite Material The Influence of Fiber Reinforcement on the Properties of the Self-Compacting Concrete Mix and Concrete Study оf the Diffusion Interaction between Titanium and Aluminum in the Composition AMg6-AD1-VT1-0 after Rolling with Different Compression Modeling Stress Deformed State Upon Contact with the Bodies of Two-Phase Microstructure Investigation of Composition and Technological Parameters of Highly Porous Gypsum Products Obtaining A Study of the Influence of Thickness of Anti-Diffusion Layer on the Structure and Thermal Resistance of Composite А5-Cr-St3 Improving the Bio-Resistance of Cement Concretes by Means of Fungicidal Poly-Functional Modifiers Study of the Influence of Refractories Structure on the Thermomechanical Properties of Tunnel Kiln Equipment Lining Study of the Suspension Stability of Titanium Dioxide of Anatase Modification for Self-Purifying Fine Concrete Composition Material for Radiation Protection Based on Modified Disperse Titanium Hydride and Silicate Connecting The Effect of Polyvinyl Alcohol on the System of Cement-Free Binding Alumino-Silicate Composition Composite Materials Based on Plasma Treated Basalt Fibers for Heavy-Duty Concrete Products Activating Effect of Aluminum Chloride in the Technology of Poly-Sulfides and Materials Based on them Physical-Chemical Studies and Evaluation of the Suitability of Chernoyarskoe Deposit’s Diatomite for the Synthesis of Foam Glass Compositions and Properties of Polymeric Concrete with Granulight Additive Assessment of Fire Safety of Coatings Based on Silicate Paint Sol Synthesis of Ultra-Dispersed Spherical Composite Materials Prospects for the Development of Building Ceramics, Based on Stale Slags from the Non-Ferrous Metallurgy of Orenburg The Economic Efficiency of the Development of Dry Mixes with the Supplement Based on Calcium Hydrosilicates Face Ceramic Brick of Soft Molding Based on Opoka-Like Raw Materials Fine-Grained Polymer-Cement Basalt Fibrous Concrete for 3D Printing The Use of Water Treatment Petroleum Sludge in the Manufacture of Ceramic Products To the Question of an Experimental Assessment of the Fatigue Characteristics of a Transversal Metal-Composite Compound The Conditions and Results of Ferrite Based on Multicomponent Crystal Formation in High Entropic Oxide Systems Ceramic Bricks of Semi-Dry Pressing with the Use of Fusible Loams and Non-Traditional Mineral Raw Materials The Use of Hard Alloy Waste in Composite Galvanic Coatings for the Restoration of Car Parts Regulation of Electrical, Thermal and Physical Properties of Composites Based on Carbon-Modified Portland Cement Materials Simple Universal Kelvin Equation Valid in Critical Point Vicinity, External-Internal State Correction, and their Application in Understanding of Oxygen Capillary Evaporation and Condensation in Mesoporous Silica MCM-41 Preparation of Poly-Substituted Crystals with M-Type Hexa-Ferrite Structure Using Melts of the BaO-PbO-SrO-CaO-ZnO-Fe2O3-Mn2O3-Al2O3 System Thermal Stability of Nano-Crystalline Nickel Electrodeposited into Porous Alumina Heat-Resistant Composite Materials Based on Secondary Material Resources Production of Foam Glass Materials from Silicate Raw Materials by Hydrate Mechanism Use of Natural Biopolymers to Create Nanocomposite Materials About the Possibility of Recycling Water Treatment Sludge in the Wood–Cement Composites Production The Influence of Temperature Testing on the Technical Data of Cementing Technology Production of Hybrid Polymer-Oxide Materials Based on Molybdenum Oxide Compounds Using Transient Electrolysis Method Chapter 2: Steels and Alloys, Metallurgical and Metalworking Technologies The Influence of Cylindrical Specimen Size and Material Properties on the Distribution of Deformation during Torsion Test Hardenability and Wear Resistance of Carburized to Hypereutectic Concentrations Steels The Mechanical Properties of the Pipe Steel after Rolling at the Plate Mill Simulation of High-Speed Cutting Using Deform 3D Software Formation of Bead Shape, Structure and Mechanical Properties of Cold-Resistant High-Strength Steel Produced by Direct Laser Deposition Method Theoretical Investigation of the Bending Process of the Pre-Strained Metal Sheet On the Role of Gamma-Alpha Transformation in the Increase of the Fracture Toughness of Maraging Steel Verification of a New Torsion Test Method to Study the Rheological Properties of Materials in a Cold State Increase of Weld Joint Efficiency of the Combined Band of a High-Speed Rotor of an Electric Machine by Local Strengthening Advanced Statistical Analysis of Grain Structure in Single-Phase Materials Nanostructured by High-Pressure Torsion The Use of a Magnetic Suspension for the Crucibleless Metal Melting Computer-Simulation of the Billet Shape Change during Helical Piercing Study of Electromagnetic Effect Parameters Influence on Fluidity of Fine Nd-Fe-B Powder The Peculiarities of Smelting of Wear-Resistant Cast Iron IChH28N2 in the Induction Crucible Furnace IChT10 Calculation of Phase Composition of α- and Near-α- Titanium Alloys How the Material Thickness Affects 0.08% Carbon Cold-Rolled Sheet Steel Influence of Thermomagnetic Treatment on the Damping Properties and Structure of Iron-Based Alloys Effect of Hf Doping of Commercially Pure Copper on Evolution of its Microstructure under High Pressure Torsion About Impact Strength and Thermal Properties of Steel Melts Thermodynamic Regularities of Nuclei Growth during Crystallization of Metastable Alloys Determination of Thermo-Physical and Physical Properties of Complex Alloyed Brass Increasing of Energy-Power Indicators of Mechanical Processing in a Planetary Mill by the Use of a Working Chamber with a Square Shape of the Internal Cavity Effect of Friction on Compression Test of Ti-6Al-4V with Open-Cellular Structure Investigation of the Effect of Oxygen Content in the Auxiliary Process Gas on the Quality and Speed of Laser Cutting of Steel Sheets Scientific Approaches to the Development of Titanium-Based Alloys for Medical Implants Phase Equilibria in a Liquid Metal of Fe-La-Ce-O System at 1600 °С Investigation of Sulfatization Mechanism of Iron-Manganese Concretions in Fluidized Bed Investigation of the Austenite Grain Growth in HY-TUF Steel Plastic Twisting of Erect Metal Roller Evaluation of the Friction Factor Influence on the Results of Cross-Wedge Rolling Simulation in Qform Software The Method of Testing Cylindrical Specimen for Torsion in Order to Determine the Rheological Properties of Materials Sensitive to the Strain Rate Microanalysis of Additive Products from Electro-Erosion Cobalt-Chrome Powders Modeling of Tool for Cold Extrusion of Steel and Tooling with Proportional Bandaging Prediction of Blast Furnace Thermal State in Real-Time Operation Influence of Powder Layer Thickness on Microstructure of Selective Laser Melted TiAl6V4 Cast Iron and Steel Smelting in Induction Crucible Furnaces of Industrial Frequency Young Modulus at High Temperatures Crystallographic Peculiarities of β-α Transformation in Brass Induced by Hot Extrusion Determination of Contact Pressure during Double-T Section Rolling in Universal Beam Groove Аutomatisation of Calculation Method of Technological Parameters of Wiredrawing with Account of Speed Factor and Material Properties Appication of the Complete Material Balance Method to Estimate the Transition of Elements in Flux Cored Arc Welding The Effect of Radial-Shear Rolling on the Microstructure and Mechanical Properties of Technical Titanium Effect of Powder Fraction 09CrNi2MoCu on the Structure and Properties of the Obtained Samples Using the Direct Laser Deposition Improvement of Methods of Calculation of Forces in Hot Strip Rolling Influence of Chemical Composition and Heat Treatment Modes on Mechanical Properties of Titanium Alloy VT22 Bars Modifying of the Surface of Products from Cast Iron as the Element of Production Modernization Method of Speed Mode Correction of Rolling Pipes in the Reduction Mill The Study of Structure Formation Evolution at High Pressure with a Shear in a Corrosion-Resistant Austenitic-Ferritic Steel 03Kh14N10K5M2YuT with Different Initial States Process Development for Solid Fuel Use at Siderite Ore Roasting in Shaft Furnace The Phase Composition of Products from Electro-Erosive Cobalto-Chrome Powders, Obtained by Additive Technologies Theoretical Justification of the Longitudinal Rolling Method of the Thick Sheets by the Severe Shear Deformation Features of the Use of Equilibrium State Diagrams for Description of Crystal Growth from Metastable Melts Identification for Technological Capabilities of Titanium and Aluminum Alloys in Deep Drawing Process The Research of the Possibilities of Using Purge Methods for the Manufacture of Casting Cores from Mixtures Based on Secondary Polymers and Technical Lignosulphonates The Role of the Primary Structure in the Formation of the Mechanical Properties of Steel Castings Investigation of Ti-6Al-4V Alloy In Situ Manufactured Using Selective Laser Melting from Elemental Powder Mixture Increasing Wear Resistance of Chizel Tools Working Bodies Based on Improving the Metallographic Structure of Grey Cast Iron Conceptual Approach to Development, Structure Formation and Hardening Micro-Alloyed by Steels for the Metallurgical Tool Arc Steel Furnace Operation at Changing Working Space Aerodynamic Flows Comparative Characteristics of Free-Machining Steels of Cr-Mo Type A Simulation of the Post-Bending Process of the Pipe Billets for Welded Pipe Manufacturing Efficiency Upgrading for Blast Furnace Smelting through Use of Iron Ore Raw Materials with Various Fluxing Degree Development of Energy Saving Technologies for Steel Wire Heat Treatment The Calculating Method of Thinning Pipes Ends before Rolling in the Reduction Mill Computer Simulation and Study of the New Forging Technology of Billets in a Step-Wedge Dies Thin Sheet Forming with 3D Printed Plastic Tool Staged Local Dissolution of Stainless Steel in Chloride Solutions Effect of Process Parameters on Quality of Ti-6Al-4V Multi-Layer Single Pass Wall during Direct Laser Deposition with Beam Oscillation Investigation of Grey Iron Primary Structure Influence on Hollow Castings Strength Grey Cast Iron Strength аs Function оf Primary Austenite Dendrites Volume Fraction Chapter 3: Surface Engineering and Coatings The Effect of Silicon in Al-Si Alloys and Electrical Treatment Modes on Structure and Properties of MAO-Coatings Formation of Coatings under the Action of Laser Radiation in Liquid Media Corrosion Resistance of MAO Coatings on Al-Si Alloys The Application of Catalytic Coatings Ion Implantation Method Kinetics of Diffusion Interaction in Cr15Ni60-AD1 Layered Composite Connection of the Steel Pipes Having a Polymeric Covering on Internal and External Surfaces Structural Formation in the Zone of Interaction under Laser Processing of Bimetal M1 + VT1-0 Researching of Steel Grade Influence on Structure and Properties of Silicate-Enamel Coatings of Pipelines Theory and Practice of Long Products with a Metal Coating Production Optimizing the Performance of Electroplating Gas-Cleaning Equipment Main Directions of the Electrochemical Chrome Plating Process Intensification Development of Technological Bases for Manufacturing Blanks of Friction Disks with Molybdenum Gas-Thermal Coating for Working in Oil in Units of Transport Machines Study of the Micro-Hardness of Anti-Friction Coating after Plastic Deformation in Bimetallic Sliding Bearings Comparative Study of High-Chromium Cast Iron Coatings Modified with WС-W2C/Co+B4С+Ni/Al Complexes and Cr3C2/PG-US25 Ceramet Analysis of Galvanized Coatings Applied on General Purpose Wire Formation of Coatings on Details from Valve Metals Alloys by Micro-Arc Oxidation in Internal Cavities of Counter Electrodes Increase Effectiveness of Shaving by Using Wear-Resistant Coatings and Preliminary Modeling Cutting The Abrasive Properties of Coal Power Plants Ash and Slag Materials The Processing of the Profile Surface of the Work-Pieces, Characterized by Low Rigidity Wear Resistance and Characteristics of the Friction Surface of Metal Coatings with Nitride-Boride Alloying Choice of Protective Coating of Metal Molds for Casting Non-Ferrous Alloys Morphology and Properties of Solid Chrome Plating, Obtained by the Galvano-Mechanical Method Features of the Formation of Various Functional Coatings of SHS Mechanical Composites Using Gas Detonation Spraying Technology Wetting of Low Carbon Steel by High-Entropy Melts CuSnBiPbGa, CuSnBiPbIn and CuSnBiInCd and Formed Structure of Diffusion Layers Study of Cavitation Erosion-Corrosion Resistance of Thermally Sprayed Ni-Based Coatings Prepared by HVAF Process Investigation of the Influence of Kinematic and Geometric Parameters of the Thermo- Sprayer Location on the Adhesion Strength of Anti-Friction Coating Cavitation Erosion-Corrosion Resistance of Deposited Austenitic Stainless Steel/E308L-17 Electrode Formation of Intermetallic Coating on 20880 Steel in the Liquid-Phase Inter-Reaction with Aluminum Technologies and Materials for Boriding of Steelworks Multifractal Analysis of Microstructures after Laser Treatment of Steels Quantitative Assessment of Dissipative Properties of Superficial Structure of the Steel 25XM Strengthened by Pulse Laser Influence Study of the Influence of Technological Factors on the Surface Structure of Aluminum 6000 Series Alloys Ingots Study of Metal Surface with Color Image Obtained with Laser Marking The Qualitative Assessment of Gas-Thermal Coating’s Cohesive Strength Estimation Methods Influence of Phase Composition of Steel on a Damage Rate from Bio-Corrosion Chapter 4: Chemical and Hydrometallurgical Technologies An Influence of EAF Dust Calcining Conditions on Zinc Leaching Efficiency in Ammonium-Chloride Media Investigating of Nitric Acid Leaching of High-Sulfur Copper Concentrate Study of Pyrolysis of Annual Crop Refuse under Reduced Pressure Arsenic Precipitation from Solutions in Autoclave-Hydrometallurgical Technology of Processing Sulphide Concentrates Strength Properties of Composite Board Materials Based on Ligno-Cellulose Fiber, Modified by Steam Explosion Treatment Oxygen Passivation of Rhodium and Platinum with Direct Current Polarization in 12 m Hydrochloric Acid Solution Copper Recovery from Rinse Waters after Ammoniac Etching of Printed Circuit Boards Investigation of Stagnant Zones in Centrifuges Electrolytic Behavior of Nickel in Polarization by Variable Asymmetric Rectangular Current in Alkaline Solutions New Chemical Fibers Obtained from Wood, Activated by Steam Explosion Treatment Creating and Studying of Enterosorbent with Harsh-Fixed Antioxidants which Have Enzymatic Properties Novel Catalytic Systems Based on Platinum Catalysts The Role of Surface Phenomena in Modified Cement Dispersions at Studying Poly-Functional Modifiers' Mechanism of Action Studies on Microwave-Plasma Treatment of Froth Flotation Tailings Pressure Leaching of Chalcopyrite Concentrate: Iron Removal from Leaching Residues Atomic Layer Deposition of Lithium-Silicon-Tin Oxide Nanofilms for High Performance Thin Film Batteries Anodes Bioleaching of Non-Ferrous Metals from Arsenic-Bearing Sulfide Concentrate Influence of Polyelectrolytes on the Processes of Structure Formation of Copper Powders Centrifugation of Interphase Suspension with the Use of Surfactants Plasma-Chemical Simulation Fragmentation of Chloroform in the Liquid Phase by Direct Electrical Discharges Influence of Gypsum Binder Phase Composition on Operational and Mechanical Properties of the Hydration Product Processing of Used Wooden Slippers by Thermal Method An Effect of the Epoxy Cementing Technology on the Deformation of the Optical External Surfaces Made of Quartz Glass The Effect of Different Oxidants on Extraction of Uranium from Low Grade Ore Pressure Leaching of Chalcopyrite Concentrate: Ultra-Fine Milling as Process Acceleration Method Investigation of Hydrometallurgical Processing of Titanomagnetite Ore Enrichment Waste Sodium Lignosulfonate and Sodium Dodecyl-Sulfate Mixtures Influence on Zinc Concentrate Pressure Leaching and Zinc Electro-Winning Obtaining of High Quality Iron Oxide from Nitric Acid Leaching Solution Extraction of Nickel and Cobalt from Nickel Slag Wastes by the Thermo-Diffusion Method Zinc Techno-Genic Formations: Physico-Chemical Features of its Extraction Comparison of Iron and Chromium Reduction from Chrome Ore Concentrates by Solid Carbon and Carbon Monoxide Chapter 5: Testing and Controlling Technologies Quality Control of Building Materials According to Uncertainty of Measurement and Stability of the Technological Process of Production Device for Testing Pipe Billet Indentation Size Effect during Measuring the Hardness of Materials by Spherical Indenter Analysis of Fatigue Damage Accumulation in Structural Materials under Quasi-Random Load Determination of the Load Carrying Capacity of Honeycomb Panels at Fixing Points under an External Load Engineering Method for Analysis of the Ability to Strain-Hardening of Steels Improvement of the Method for the High-Carbon Wire Rod Pearlite Grain Grade Identification Investigation of Magnetic Properties of Various Structural Classes Steels in Weak Magnetic Fields Characteristic for Generation of Thermoelectric Currents in Electron Beam Welding Test for Anticorrosive Properties of Packing Paper under the Conditions of Increased Humidity and Presence of Chlorides


Best Sellers


Product Details
  • ISBN-13: 9783035715002
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1250
  • Spine Width: 63 mm
  • Width: 170 mm
  • ISBN-10: 3035715009
  • Publisher Date: 14 Feb 2020
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 299 Solid State Phenomena
  • Weight: 2210 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Materials Engineering and Technologies for Production and Processing V: (Volume 299 Solid State Phenomena)
Trans Tech Publications Ltd -
Materials Engineering and Technologies for Production and Processing V: (Volume 299 Solid State Phenomena)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Materials Engineering and Technologies for Production and Processing V: (Volume 299 Solid State Phenomena)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!