Keep up-to-date with the latest on adhesion and adhesives from an expert group worldwide
The present book constitutes Volume 9 in the book series Progress in Adhesion and Adhesives which was conceived as an annual publication and the premier volume made its debut in 2015. These volumes provide state-of-the-knowledge and curated reviews on many and varied topics about adhesion and adhesives.
The current book contains 14 chapters that include the Usage of Hydrophobic and Icephobic Coatings for Aircraft Icing Mitigation; Hydrophobic Coatings: An Insight into Fundamental Concepts and Modern Applications; Enhancement of Adhesion of Polymers by Plasma Treatment; Hydrophobicity Modification of Artificial Leather by Atmospheric Pressure Plasma Treatment; Sustainable Plasma Technology as Surface Treatment on Footwear Materials: Bromination - The Only Selective Plasma Process; Structural Bonding to Low Surface Energy (LSE) Materials; Review on the Effects of a Defect and/or Joint Geometry on Stress Distribution in Tubular Joints Under Tensile Loads; Failure Cases in Adhesive Joints and Coatings; Initiating Systems for Curing Anaerobic Adhesives; Progress in Using Fungal Mycelia as Adhesive in Composites; Mechanically Responsive Hydrogels as Adhesives for Clinical Applications; Polyurea Adhesives and Coatings; Adhesion Strength of Electrode Coatings in Lithium-Ion Batteries and Supercapacitors.
Audience
This book will be valuable to adhesionists, adhesive technologists, polymer scientists, and materials scientists in adhesive bonding, plasma polymerization, adhesion in polymer composites, ice adhesion and mitigation, and adhesive joint testing.
Table of Contents:
Preface xvii
1 On the Usage of Hydrophobic and Icephobic Coatings for Aircraft Icing Mitigation 1
Haiyang Hu, Linchuan Tian, Chukwudum Eluchie, Harsha Sista and Hui Hu
1.1 Introduction 2
1.2 Experimental Setup and Test Model 6
1.3 Measurement Results and Discussion 12
1.4 Summary 27
2 Hydrophobic Coatings: An Insight into Fundamental Concepts and Modern Applications 35
Sushil S. Pawar, Rupesh S. Naik, R. Baloji Naik, T. K. Mahato and D. Ratna
2.1 Introduction 36
2.2 Practical Implications and Applications 42
2.3 Emergence of Synthetic Hydrophobic Coatings 46
2.4 Advancements in Coatings 48
2.5 Emerging Approaches 52
2.6 Future Outlook and Research Opportunities 58
2.7 Summary 60
3 Enhancement of Adhesion of Polymers by Plasma Treatment: A Critical Review 65
Dipankar Pal and Sudarsan Neogi
3.1 Introduction 66
3.2 Plasma Processes 68
3.3 Plasma-Polymer Interaction 77
3.4 Effects of Plasma Treatment of Various Polymers 81
3.5 Improvement of Adhesion of Various Polymers by Plasma Treatment 98
3.6 Summary 103
4 Hydrophobicity Modification of Artificial Leather by Atmospheric Pressure Plasma Treatment 109
C.W. Kan and T.Y. Man
4.1 Introduction 109
4.2 Atmospheric Pressure Plasma Treatment 111
4.3 Applications of Atmospheric Pressure Plasma 112
4.4 Leatherette 115
4.5 Changes in Hydrophobicity of Leatherettes After the Atmospheric Plasma Treatment 116
4.6 Results 121
4.7 Summary 129
5 Sustainable Plasma Technology as Surface Treatment on Footwear Materials: A Review 135
Carlos Ruzafa-Silvestre, Carlota Hernández-Fernández, Víctor M. Serrano-Martínez and Elena Orgilés-Calpena
5.1 Introduction to Plasma Technology as Surface Treatment 136
5.2 Plasma Technology in Footwear Industry 137
5.3 Types of Plasma Technology Used for Surface Treatment 139
5.4 Plasma Surface Treatment on Footwear Materials 141
5.5 Characterization of Plasma Treated Footwear Materials 152
5.6 Plasma Technology in Combination with Other Sustainable Technologies in the Footwear Industry 153
5.7 Benefits and Limitations of Sustainable Plasma Technology for Reducing Environmental Impact 155
5.8 Tips and Best Practices 157
5.9 Summary and Prospects 159
6 Bromination - The Only Selective Plasma Process 171
Jörg Florian Friedrich
6.1 Introduction 171
6.2 Reaction Mechanisms of Chemical Bromination 175
6.3 Plasmachemical Bromination 182
6.4 Reactions at C-Br Moieties 212
6.5 Summary 221
7 Structural Bonding to Low Surface Energy (LSE) Materials 231
Emmanuel Pitia
7.1 Introduction 231
7.2 Types of Low Surface Energy Materials 232
7.3 Why are LSE Materials Hard to Bond? 235
7.4 Bonding to LSE Materials 241
7.5 Summary 256
8 A Review on the Effects of a Defect and/or Joint Geometry on Stress Distribution in Tubular Joints Under Tensile Loads 261
Mohammad Shishesaz
8.1 Introduction 262
8.2 Stress Distribution in Adhesively Bonded Joints Under Tensile Loads 264
8.3 Estimation of Stress Concentration Factor in the Welded Tubular Joints Under Axial Brace Loads 288
8.4 Stress Distribution in Welded T-Joints Stiffened by Fiber-Reinforced Polymer (FRP) Under Axial Brace Load 307
8.5 Summary 308
9 Failure Cases in Adhesive Joints and Coatings 317
Alisa Buchman
9.1 Introduction 318
9.2 Case Study One -- Coating Failure in a Warehouse Construction 328
9.3 Case Study Two -- Adhesion Failure in a Cooling Device 344
9.4 Case Study Three -- Adhesion Failure in Weather Balloon Cloth 346
9.5 Case Study Four -- Adhesion Failure in a Composite Cone 357
9.6 Case Study Five -- Coating Failure in a Thermoplastic Cylindrical Tube 361
9.7 Summary 366
10 Initiating Systems for Curing Anaerobic Adhesives. Critical Review 369
D.A. Aronovich
10.1 Introduction 370
10.2 Peroxide Curing Initiators 373
10.3 Curing Accelerators for Single-Component Anaerobic Compositions 383
10.4 Peroxide-Free AA Curing Systems 446
10.5 Controlled Curing of AA Under the Influence of External Factors 454
10.6 Conclusions 455
10.7 Summary and Outlook 457
11 Progress in Using Fungal Mycelia as Adhesive in Composites 469
Wenjing Sun, Christopher G. Hunt and Mehdi Tajvidi
11.1 Introduction 469
11.2 Basics of Fungal Mycelia 471
11.3 Production Procedures 474
11.4 Adhesive Performance of Fungal Mycelia in Different Composite Systems 477
11.5 Knowledge Gaps and Commercial Challenges 484
11.6 Summary and Perspectives 485
12 Mechanically Responsive Hydrogels as Adhesives for Clinical Applications 493
Anindya Karmaker, Zarin Tasnim Juthi and Shoeb Ahmed
12.1 Introduction 494
12.2 Fundamentals of Hydrogels 495
12.3 Design and Synthesis of Mechanically Responsive Hydrogels 497
12.4 Characterization Techniques for Hydrogel Adhesives for Clinical Applications 501
12.5 Applications of Mechanically Responsive Hydrogel Adhesives 513
12.6 Summary 514
13 Polyurea Adhesives & Coatings 521
Fabio Sarcina, Marco Signorile and Eleonora Salmoiraghi
List of Abbreviations 521
13.1 Introduction 523
13.2 Formulation & Chemistry 524
13.3 Polyurea Properties 533
13.4 Health & Safety 548
13.5 Application Method 549
13.6 Uses 552
13.7 Future Directions 553
13.8 Summary 554
14 Adhesion Strength of Electrode Coatings in Lithium-Ion Batteries and Supercapacitors: Literature Review 561
Hajar Benhaddou, Leo Mahé, Caroline Richard and François Tran Van
14.1 Introduction 561
14.2 Materials, Collectors and Foils as Substrates 562
14.3 Different Delaminations in Energy Storage Systems 569
14.4 Mechanical Testing and Modeling Techniques for Characterization of Adhesion 575
14.5 Summary 588
References 589
Index 593
About the Author :
Kashmiri Lal Mittal was employed by the IBM Corporation from 1972 through 1993. Currently, he is teaching and consulting worldwide in the broad areas of adhesion and surface cleaning. He has received numerous awards and honors, including the title of doctor honoris causa from Maria Curie-Skłodowska University, Lublin, Poland. He is the editor of more than 150 books dealing with adhesion measurement, adhesion of polymeric coatings, polymer surfaces, adhesive joints, adhesion promoters, thin films, polyimides, surface modification surface cleaning, and surfactants.
