Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, Volume 36, Issue 6
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, Volume 36, Issue 6: (Ceramic Engineering and Science Proceedings)
Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, Volume 36, Issue 6: (Ceramic Engineering and Science Proceedings)

Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, Volume 36, Issue 6: (Ceramic Engineering and Science Proceedings)

|
     0     
5
4
3
2
1




Available


About the Book

The Ceramic Engineering and Science Proceeding has been published by The American Ceramic Society since 1980. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

Table of Contents:
Preface ix Introduction xi ADVANCED PROCESSING AND MANUFACTURING Development of High Temperature Joining and Thermomechanical Characterization Approaches for SiC/SiC Composites 3 Michael C. Halbig, Mrityunjay Singh, and Jerry Lang Microstructural Observation of Interfaces in Diffusion Bonded Silicon Carbide Ceramics by TEM 13 Hiroshi Tsuda, Shigeo Mori, Michael C. Halbig, Mrityunjay Singh, and Rajiv Asthana Preparation and Characterization of Rb-SiC Ceramics Fabricated from Phenolic Resin/SiC 21 Akihiro Shimamura, Mikinori Hotta, Tatsuki Ohji, and Naoki Kondo New Combined Method of MPS and FEM for Simulating Friction Stir Processing 27 Hisashi Serizawa and Fumikazu Miyasaka Novel Visualizing Technique of the Tips of the Cracks for Indentation Fracture Resistance Method 37 H. Miyazaki and Y. Yoshizawa Slip-Casting by Water-Absorbing Resin Mold Enables Crack-Free Ceramic Molding System and Products with Partially Different Thicknesses 45 Akio Matsumoto Influence of Lanthanoid Dopant and N/O Substitution on the Electronic Structure and Luminescent Properties of Lanthanum Silicon Oxynitride Phosphors  55 I.A.M. Ibrahim, Z. Len éš, L. Benco, and P. Šajgalík Effect of Ti3SiC2 Particulates on the Mechanical and Tribological Behavior of Sn Matrix Composites 65 T. Hammann, R. Johnson, M. F. Riyad, and S. Gupta Field Assisted Sintering of Silicate Glass-Containing Alumina 75 Mattia Biesuz and Vincenzo M. Sglavo Modeling the First Activation Stages of the Fe(hfa)2TMEDA CVD Precursor on a Heated Growth Surface 83 Gloria Tabacchi, Ettore Fois, Davide Barreca, Giorgio Carraro, Alberto Gasparotto, and Chiara Maccato Development of High Aspect Ratio Hexagonal Boron Nitride Filler by Mechanical Exfoliation 91 Yuichi Tominaga, Kimiyasu Sato, Daisuke Shimamoto, Yusuke Imai, and Yuji Hotta Preparation and Characterization of Nanostructured Films: Study of Hydrophobicity and Antibacterial Properties for Surface Protection 101 M. Barberio, S. Veltri, E. Sokullu, F. Xu, M.A. Gauthier, and P. Antici ADDITIVE MANUFACTURING AND 3D PRINTING 3-D Printing and Characterization of Polymer Composites with Different Reinforcements 115 Anton Salem, Mrityunjay Singh, and Michael C. Halbig Additive Manufacturing of Drainage Segments for Cooling System of Crucible Melting Furnaces 123 Miranda Fateri, Andreas Gebhardt, and Georg Renftle Additive Manufacturing of Silicon Carbide-Based Ceramics by 3-D Printing Technologies 133 Shirley X. Zhu, Michael C. Halbig, and Mrityunjay Singh Additive Manufacturing of Light Weight Ceramic Matrix Composites for Gas Turbine Engine Applications 145 Mrityunjay Singh, Michael C. Halbig, and Joseph E. Grady Application of Selective Separation Sintering in Ceramics 3D Printing 151 J. Zhang and B. Khoshnevis Contour Crafting of Advanced Ceramic Materials 159 Mahmood Shirooyeh, Mohammadaref Vali, David Shackleford, Payman Torabi, Paul W. Rehrig, Oh-Hun Kwon, and Behrokh Khoshnevis Author Index 169


Best Sellers


Product Details
  • ISBN-13: 9781119211655
  • Publisher: John Wiley & Sons Inc
  • Publisher Imprint: Wiley-American Ceramic Society
  • Height: 241 mm
  • No of Pages: 192
  • Returnable: N
  • Spine Width: 18 mm
  • Width: 160 mm
  • ISBN-10: 1119211654
  • Publisher Date: 16 Feb 2016
  • Binding: Hardback
  • Language: English
  • Returnable: N
  • Series Title: Ceramic Engineering and Science Proceedings
  • Weight: 454 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, Volume 36, Issue 6: (Ceramic Engineering and Science Proceedings)
John Wiley & Sons Inc -
Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, Volume 36, Issue 6: (Ceramic Engineering and Science Proceedings)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II, Volume 36, Issue 6: (Ceramic Engineering and Science Proceedings)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!