Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III, Volume 30, Issue 8
Home > Mathematics and Science Textbooks > Physics > Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III, Volume 30, Issue 8: (512 Ceramic Engineering and Science Proceedings)
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III, Volume 30, Issue 8: (512 Ceramic Engineering and Science Proceedings)

Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III, Volume 30, Issue 8: (512 Ceramic Engineering and Science Proceedings)

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

This issue contains 25 invited and contributed papers, all peer reviewed according to the American Ceramic Society Review Process. The latest developments in processing and manufacturing technologies are covered, including smart processing, advanced composite manufacturing, novel forming and sintering technologies, microwave-processing, polymer-based processing, and film deposition technologies. These papers discuss the most important aspects necessary for understanding and further development of processing and manufacturing of ceramic materials and systems.

Table of Contents:
Preface. Introduction. Solid-State Reactive Sintering of Polycrystalline Nd:YAG Ceramic Laser Host Materials Using an 83GHz Millimeter Wave System. Microwave Assisted Large Scale Sintering of Multi-Layer Electroceramic Devices. Influence of the Secondary Phase Composition on the Microwave Sintering Process. Optimization of Microwave-Assisted Rapid Debinding of CIM Parts in Multi-Mode Applicators. Characterization of a Potential Superplastic Zirconia Spinel Nanocomposite processed by Spark Plasma Sintering. Densification Enhancement of Alumina by Sandwich Process Design. Processing Factors Involved in Sintering B-SI3-N4 Based Ceramics in an Air Atmosphere Furnace. Pressureless Sintering of Boron Carbide in an Ar Atmosphere Containing Gaseous Metal Species. Strategy for Producing Ultra-Highly Porous Cordierite. Issues in the Synthesis and Fabrication of Refractory Carbides, Borides, Silicides and their Mixtures. Shrinkage Reduction of Clay Through Addition of Alumina. ITO Thin Film Coatings Obtained from Developed Ceramic Rotary Sputtering Targets. Ultrasonic Non Destructive Testing of Ceramic Sputtering Targets. Morphology Control of Metal Oxides for Environmental Sensors. Basic Study of Joint Interface Formation in Magnetic Pressure Seam Welding. Joining of Silicon Nitride by Slurry or Paste. Segregation Mechanism in (M=Al, Ga) Zn 1-xMxO Ceramics and Its Influence on the Thermoelectric Properties. Production of Novel Architectures Through Controlled Degradation of Electrospun Precursors. Millimeter Wave Properties of Titania Photonic Crystals with Diamond Structures Fabricated by Using Micro-stereolithography. Sintering Kinetic Study of 2Y-TZP/Al2O3 Composite during Initial Stage of Sintering. Investigations of Phenolic Resins as Carbon Precursors for C-Fiber Reinforced Composites. Aluminum Nitride Multi-Walled Nanotube (MWNTs) Nanocomposite by Direct In-situ Growth of CNTs on Aluminum Nitride Particles. Microstructural Characterization of C/C-SiC Composites after Oxidation with Oxyacetylene Gas in Open Atmosphere. The Effect of Interparticles Interactions on the Rheological Properties of Paraffin-Wax Suspensions. Preparation of Highly Concentrated Nanosized Alumina Suspensions of Spray-Drying. Author Index.


Best Sellers


Product Details
  • ISBN-13: 9780470584385
  • Publisher: John Wiley & Sons Inc
  • Publisher Imprint: Wiley-American Ceramic Society
  • Language: English
  • Series Title: 512 Ceramic Engineering and Science Proceedings
  • ISBN-10: 0470584386
  • Publisher Date: 17 Dec 2009
  • Binding: Digital (delivered electronically)
  • No of Pages: 231

Related Categories

Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III, Volume 30, Issue 8: (512 Ceramic Engineering and Science Proceedings)
John Wiley & Sons Inc -
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III, Volume 30, Issue 8: (512 Ceramic Engineering and Science Proceedings)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials III, Volume 30, Issue 8: (512 Ceramic Engineering and Science Proceedings)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!