Testing and Evaluation of Inorganic Materials III
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Testing of materials > Testing and Evaluation of Inorganic Materials III
Testing and Evaluation of Inorganic Materials III

Testing and Evaluation of Inorganic Materials III

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). The focus of this special collection was set on materials properties and testing techniques, it covers most aspects of testing techniques on mechanical, chemical, physical properties and microstructures of ceramics, glass and concrete. It is hoped the collection will promoted the research and development in the field of testing and evaluation of inorganic materials.

Table of Contents:
Preface Chapter 1: Raw Materials and Processing Synthesis of Dispersed Y2O3 Nanopowder from Yttrium Stearate Preparation and Characterization of Gd2Zr2O7 Nanoparticles via the Citric Acid Chelating Agent Method Preparation of Ultrafine Al(OH)3 Powders from Scrap Aluminum Synthesis of LaFeO3 Nano-Powders by Self-Propagating Combustion Method of Sol-Gel Synthesis and Photo-Catalytic Properties Characterization of Graphene/TiO2 Nanotube Composites Preparation of the Ceramic Hollow Balls of Aluminium Titanate-Based by Rolling-Ball Method Preparation of Porous Silicon by Magnesiothermic Reduction from Serpentine Effect of Ball Milling on the Properties of Zirconia Powder Prepared by Alcohol-Aqueous Coprecipitation Method Study on Extraction of Alumina from Sericite Phyllite Preparation of High Performance SiCf/SiC Composites through PIP Process SiC-TiB2 Composite Densified by Pressureless Liquid-Phase Sintering Effect of Cerium Oxide on Sinterability, Microstructure and Properties of Anorthite-Based Glass/Ceramic Composites Preparation and Characterization of Al2O3-Kaolin Composite Porous Ceramic Used as Ceramic Membrane Support Preparation and Characterization of Nb2O5-Al2O3 System Ceramics with Different Al2O3 Additions Study on Preparation and Properties of Yttria Stabilized Zirconia Solid State Electrolyte Synthesis and Properties of Composite Stabilized ZrO2 Preparation and Characterization of Pt/YSZ Electrode of Zirconia Oxygen Sensor NiO Sensing Electrode for NOx Detection at High Temperature A Review on Fabrication Methods of BiFeO3 Thin Films Study on Performance of Ru-Ir-Ti/Ti Oxide Coating Anodes Prepared with Method of Surface Nitriding on Titanium The Mechano-Chemical Synthesis and Characteristics of PMN and PZT Preparation and Properties of Sr2NaNb5O15 Lead-Free Piezoelectric Ceramics by Sol-Gel Method Preparation of High Performance Pt Counter Electrodes on Conductive Plastic Substrate for Flexible Dye-Sensitized Solar Cells Effect of Vitique Esthetic Cementation on Tetracycline Stained Teeth-Mask with Different Simulated Staining Levels Following IPS-Empress II Ceramic Veneers Effects of Graphite Mold on Cooling Process of Fused AZS 33# Refractory Preparation of the Sulfur-Free Expanded Graphite Using Induction Heating Method Preparation and Properties of Bacteriostatic Sponge Influence of Bentonite on Properties of Glass-Based-Sintering Material for Borehole-Wall Renovation Study on Joining of ZrO2 Tape-Casting Substrates and Adhesive Mechanism Chapter 2: Chemical Composition and Microstructure Measurement and Characterization of the Particle Size of Refractory Corundum Effects of Sol Network Modifiers on Preparation, Morphology and Phase Composition of Zirconium Diboride Nano-Powders by Novel Sol-Gel Technology Preparation and Characterization of Hydrophobic Silica Aerogel by Ambient Pressure Drying Method Synthesis and Characterization of FeO+ Nanosheets The Preparation and Characteristics of MMT Nanosheets Properties Related Phase Evolution in Multilayer Silicate Ceramics Grain Boundary Phase Analysis for Y2O3-Doped AlN Ceramics Joining of C/SiC Composite and TC4 Alloy Using 70Ag28Cu2Ti Active Brazing Alloy Study on the Gemological Characteristics of Amber from Myanmar and Chinese Fushun The Study on Composition and Heat Treatment of the Fei-Color Jade Study on the Microstructure of Inorganic Fullerene-Like WS2 The Influence of Alumina Addition on the Microstructures of YSZ Microstructure Analysis of the ZrO2/Al2O3 Multi-Phase Ceramics Study on the Microstructure and Morphology of Sintering Process of SiC-TiB2 Composite Microstructure Observation and Analysis of Sintered SiC Ceramics by SEM Textural Properties of Nanocrystalline Hydroxyapatite Synthesized via a Microwave-Hydrothermal Process Influencing Factors of Macrosporous Ordering in TiO2 and ZrO2 Inverse Opals Doping Effect of Alkali Ions on the Microstructural and Electrical Properties of ZnO-Pr6O11-Based Varistor Ceramics A Review of the Influential Factors on the Ferroelectric Domain Structure in BiFeO3 Thin Films Effect of Ar Pressure on Properties of Polycrystalline CdZnTe Films Effect of Oxygen Partial Pressure on Properties of ZnO Films Deposited on Freestanding Diamond Films Properties of Li-Doped ZnO Films Deposited on Diamond Films Interfacial Reactions between Polymer Derived SiC Fiber and Ti3Si(Al)C2 Crystal Structure Stabilization of Gadolinium Aluminum Garnet (Gd3Al5O12) and Photoluminescence Properties Structural Features and Color Tunable Photoluminescence of the Binary and Ternary Layered Rare-Earth Hydroxides of (Y,Ln)2(OH)5NO3·nH2O (Ln=Tb, Eu) Structure and Luminescence Characteristics of Yttrium Hydroxide Nanosheets Doped with Tb3+ Chapter 3: Mechanical and Physical Properties Theoretical and Experimental Studies on Strength and Stiffness of Vacuum Glazing Mechanical Properties of Dental Porcelain Discs by Different Producing Methods Preparation and Mechanical Properties of a Novel Biomedical Magnesium-Based Scaffold Effect of Nb2O5/La2O3 Additions on Mechanical Properties of Al2O3 Ceramics Prepared by Microwave Sintering Effects of Calcium Hexaluminate Addition on the Mechanical Properties of Zirconia-Toughened-Alumina Study on Mechanical Properties and Toughening Mechanism of MWCNTs/Ti(C, N) Cermets-Based Composites Comparisons of Microstructures and Hardness Distribution between Clinocardium Californiense and Veined Rapa Whelk Shells Effects on Cold Modulus of Rupture and Cold Crushing Strength of One Low Cement Refractory Castable (LCRC) The Influence of Steel Cover Thickness on Ballistic Performance of Confined TiC-TiB2 Ceramic Tiles against the Impact of Long-Rod Tungsten Alloy Penetrator of 1.4 km · s-1 Ballistic Performance of TiC-TiB2 Composite Armour under the Impact of Long-Rod Tungsten Alloy Projectiles of 1.4 km · s-1 Properties Analysis of Corundum Castables and Corundum MA Spinel Castables Evaluation of High Temperature Interfacial Bonding Strength of Ti3SiC2-Al2O3 Joint in Air Cyclic Contact Fatigue of Dental Porcelain Effect of Coupled Conditions of Thermal Cycle and Dump Environment on Microstructure of 5mol% Yttria Stabilized Zirconia The Chemical Plating Copper of the SiC Particles and Thermal Expansion Behavior of the SiCp/Cu Composites Thermal Stress Analysis of Photovoltaic Hollow Glass Based on ANSYS Effect of CrTiAlN Coatings on High-Temperature Oxidation Behavior of H13 Steel Fabrication and Oxidation-Resistance Property of Coated ZrB2-YAG-Al2O3 Multi-Phase Ceramics Corrosion Behavior of ZrO2-Mo Composite in Na2SO4 Solution Preparation and Thermoelectric Properties of Ca3Co4O9 Ceramics with Parallel Sheet Shaped Pores Photoluminescence Characteristics of Sol–Gel Derived ZnTiO3 Doped with Ni2+ Ion Research on Electrode Propertie of Heater for Planar Oxygen Sensor NO2 Response of Solid Electrolyte Sensors Made Using ZnFe2O4 Electrode Effect of NO2 Concentration on Sensitivity for High Temperature Impedancemetric NOx Sensors Bonding and Electrochemical Property Test of Zirconia Ceramics The Effect of Liner Thickness on the Color of Y-TZP Based All-Ceramic Restorations Study on Biocompatibility of Nano-TiO2 / Titanium Alloy Test of Relative Translucency for Four All-Ceramic Core Material after Veneering Ceramic A Comparative Study on Relative Translucency of Four Dental All-Ceramic Core Materials Effect of Post-Core Materials on the Color Value of Four Dental All-Ceramic Cores Performance Research on Photovoltaic/Thermovoltaic Solar System in Building Integrated Photovoltaic (BIPV) Research on Performance of Photovoltaic Insulating Glass Modules in Building Integrated Photovoltaic (BIPV) Early Age Property Study of Phosphate Cement by Electrical Conductivity Measurement Testing and Evaluation on the Chloride Ion Penetrability of Concrete under Compressive Stress The Research on Jadeite-Jade Lavender Based on CIE DE2000 Absorption Enhancing Effect of Sodium Dodecyl Sulfate on Metformin Hydrochloride in Rat Colon Chapter 4: Testing Technique and Devices A Sample Holder for X-Ray Powder Diffraction Studies of Flakiness and Block Sample Investigation about Dilution Ratio Effect on X-Ray Intensity Research on Influence of Diffractometer Slits on XRD Pattern Determination and Evaluation of Dead Time for X-Ray Fluorescence Spectrometer Resonant Inspection of Ceramic Tiles Thermal Fatigue of Ceramics: Theory, Life Predication and Characterization Methods Measuring Isostatic Pressing Strength of Hollow Glass Microspheres’ by Mercury-Injection Apparatus Experimental Research on Granule Moisture Measurement by Microwave Resonance Technology in a Fluidized Bed Dryer Testing and Evaluation of Mechanical Properties for Anisotropic Engineering Materials with Varied Loads The Study of Equipment for Testing High Temperature Elastic Modulus Based on the Acoustical Resonance Method Development of the Coaxiality Calibration System Based on the American Standard ASTME1012 Usability of Effective Medium Model for Microwave Absorbing Ceramics Three-Dimension Impedance Representation for Microwave Absorptive Ceramics The Difference of Jadeite-Jade Lavender under Three Light Sources Study on Minimum Teeth without Undercutting of Involute Gears with 14.5 Degree Pressure Angle The Programming of Dentistry CCS/CCM Software Improve the Profit from Principal Operations of Our Listed Ceramic Companies through Test Technology and Quality Management


Best Sellers


Product Details
  • ISBN-13: 9783037856178
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 540
  • Weight: 1100 gr
  • ISBN-10: 3037856173
  • Publisher Date: 11 Apr 2013
  • Binding: Paperback
  • Language: English
  • Spine Width: 27 mm
  • Width: 170 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Testing and Evaluation of Inorganic Materials III
Trans Tech Publications Ltd -
Testing and Evaluation of Inorganic Materials III
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Testing and Evaluation of Inorganic Materials III

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!