Shell Structures: Theory and Applications (Vol. 2)
Home > Science, Technology & Agriculture > Environmental science, engineering and technology > Shell Structures: Theory and Applications (Vol. 2): Proceedings of the 9th SSTA Conference, Jurata, Poland, 14-16 October 2009
Shell Structures: Theory and Applications (Vol. 2): Proceedings of the 9th SSTA Conference, Jurata, Poland, 14-16 October 2009

Shell Structures: Theory and Applications (Vol. 2): Proceedings of the 9th SSTA Conference, Jurata, Poland, 14-16 October 2009

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Shell Structures. Theory and Applications, Volume 2 contains 77 contributions from over 17 countries, reflecting a wide spectrum of scientific and engineering problems of shell structures. The papers are divided into six broad groups: 1. General lectures; 2. Theoretical modeling; 3. Stability; 4. Dynamics; 5. Numerical analysis; 6. Engineering design, and will be of interest to academics, researchers, designers and engineers dealing with theoretical modelling, computerized analyses and engineering design of thin-walled structures and shell structural elements.

Table of Contents:
General lectures Developments in strength and stability of shell components used in submersibles J. Błachut Recent developments in the analysis of carbon nanotubes and nonlinear shell theories J.N. Reddy, R.A. Arciniega & C.M. Wang Recent developments in the theory of nonlinearly elastic plates and shells D.J. Steigmann Modeling of failure mechanisms in laminated composite shell structures W. Wagner Recent improvements in formulation of mixed and mixed/enhanced shell elements K. Wiśniewski Theoretical modelling On the shell and plate theories with surface stresses H. Altenbach &V.A. Eremeyev On evolution of notion of the capillarity tensor J. Badur & M. Karcz Continuous dependence and instability in the linear theory of elastic shells M. Bîrsan & H. Altenbach The free material optimization of elastic plates and membrane shells. The case of two loading conditions S. Czarnecki & T. Lewiński On tension of a two-phase elastic tube V.A. Eremeyev & W. Pietraszkiewicz Modelling of thin functionally graded shells J. Jędrysiak & Cz. Woźniak Compression of nonlinear elastic membranes between rigid surfaces A.M. Kolesnikov On exact two-dimensional kinematics for the branching shells V. Konopińska & W. Pietraszkiewicz Stiffness maximization of plates and shells made of elastic material with fixed Kelvin moduli T. Lewiński & G. Dzierżanowski The dynamic modelling of thin skeletonal shallow shells B. Michalak & Cz. Woźniak Modeling of carbon nanotubes with the use of thin shell theory A. Muc The Reissner-Mindlin plate is the -limit of linear Cosserat elasticity P. Neff& K.-I. Hong On displacemental version of the non–linear theory of thin shells S. Opoka & W. Pietraszkiewicz Towards a theory of shells of variable thickness M.L. Szwabowicz Nonlinear Saint-Venant problem of torsion and tension of the cylindrical shell L.M. Zubov & V.A. Eremeyev Stability Buckling of circular ring joint with cylindrical shell 1 S.B. Filippov Stability of roof trusses stiffened by corrugated sheets P. Iwicki Elastic-plastic stability analysis of unbalanced sandwich cylindrical shells under longitudinal and shear loading L. Jaskuła & J. Zielnica Stability equations for thin elastic barelled shells under external pressure P. Jasion & K. Magnucki Influence of the axial mode on interactive buckling of thin-walled channels Z. Kołakowski & K. Kowal-Michalska Refined results on buckling of the axially compressed circular cylinder S. Opoka & W. Pietraszkiewicz Static and kinetic limit loads of spherical shells J. Pontow & D. Dinkier Imperfection sensitivity of multilayered composite shells A. Sabik & I. Kreja Stability of elastic cylindrical micropolar shells subject to combined loads D.N. Sheydakov Tests on the buckling capacity of cylindrical shells under circumferential imperfection H. Showkati, M. Pourmirza & A. Yousefieh Numerical stability analysis of shell structures revisited R.G. Winkler & F.-J. Falkner Axisymmetric imperfections interaction effect on the buckling of cylindrical shells A. Yousefieh, M. Pourmirza & H. Showkati Dynamics Modeling of vibration of pre-stressed liquid filled tank J. Badur, M. Karcz, M. Lemański, R. Kucharski, A. Wiśniewski, W. Zakrzewski, D. Sławiński & L. Nastałek Nonlinear dynamics of shallow shells with complex base coupled to quiescent fluid I.D. Breslavsky, K.V. Avramov & E.A. Strelnikova Vibrations of composite fibre-reinforced beam induced by inertialess moving load J. Gołaś, A. Podhorecki & M. Jarząb Non-linear FEM analysis of earthquake-induced pounding between two buildings modelled by shell elements R. Jankowski Investigation of nonlinear dissipative chaotic dynamics of plates and shells V.A. Krysko, M. Zhigalov, V. Soldatov, S. Mitskevitch, E.S. Kuznetsova, K.F. Shagivaleev, J. Awrejcewicz & J. Mrozowski Influence of HE location on elastic-plastic tube response under blast loading J. Malachowski Elasto-plastic dynamic response of thin-walled columns subjected to pulse compression R.J. Mania & K. Kowal-Michalska Free vibrations of cylindrical shells with delaminations A. Muc & P. Kędziora Influence of rotation velocity of a thick-walled pipe on its corrosive wear E.A. Nuriyev Experiments on damage development in metallic plates subjected to explosions Ł. Pyrzowski, P. Kłosowski, K. Woznica & O. Pennetier Free vibrations of shell rotor blades in a compressor R. Rządkowski, L. Kwapisz & R. Szczepanik Dynamic and tomography analysis of granular flow in cylindrical shell K. Wilde, J. Tejchman, M. Rucka & M. Niedostatkiewicz Dynamic behaviour of thin annular plates made from functionally graded material A. Wirowski Wave propagation in the periodically ribbed elastic plates Cz. Woźniak & E. Wierzbicki Dynamic analysis of functionally graded cylindrical shell with finite length M.H. Yas & R. Najmee Numerical analysis Analysis of bearing capacity of cylindrical panel subjected to corrosion A.N. Alizada Numerical simulation of local instabilities of membranes reinforced with cables W. Bereza & M. Stanuszek Laminated shells in nonlinear six-parameter shell theory J. Chróścielewski, I. Kreja, A. Sabik & W. Witkowski Inf-sup condition tests for shell/plate finite elements W. Gilewski & M. Sitek Application of discrete Fourier series in the boundary value problems of plates and shells Ya.M. Grigorenko & L.S. Rozhok Static problems for noncircular cylindrical shells: Classical and refined theories A.Ya. Grigorenko & S.M. Yaremchenko Solving stationary problems of shell theory with allowance for transverse reduction Ya.M. Grigorenko, E.I. Bespalova & G.P. Urusova Multiscale modeling for cancellous bone by using shell elements K. Hackl, S. Ilic & R. Gilbert Three-node planar DCT type finite element in nonlinear shell analysis M.K. Jasina Non-linear geometrically exact solid-shell element under follower loads G.M. Kulikov & S.V. Plotnikova A thermopiezomechanical finite rotation shell element S. Lentzen On an efficient implementation of `Solid-Shell’ finite elements with quadratic shape functions for explicit time integration S. Mattern & K. Schweizerhof The helicoidal modeling in the approximation of shell structures mechanics T. Merlini & M. Morandini Remarks on the selective reduced integration in 9-node shell elements P. Panasz & K. Wiśniewski Engineering design Plastic limit load of piping branched junctions under pure bending moment R. Akbari Alashti Numerical modelling of the hysteretic behaviour of piezoactuated structures H. Bossong, R. Schmidt & D. Weichert Influence of geometric imperfections on capacities of silo structures loaded with pressure below atmospheric M. Gołota, J. Górski, T. Mikulski & K. Winkelmann Metamodels in optimisation of plywood sandwich panels K. Kalnins, G. Jekabsons, K. Zudrags & R. Beitlers Safety of defected cooling tower shell T. Kasprzak, P. Konderla & G. Waśniewski Strength of stiffened hybrid steel girders under shear T. Kinomura & S. Shimizu Form-finding of textile hanging roof of Opera Lesna open-air theatre in Sopot P. Kłosowski Strength analysis of ascissors-AVLB type bridge W. Krason A FEM membrane model of human fascia–Synthetic implant system in a case of a stiff ventral hernia orifice I. Lubowiecka, C. Szymczak, A. Tomaszewska & M. Śmietański Collapse mechanics in externally loaded pressure vessels with simulated corrosion damage J.R. MacKay, F. van Keulen, M.J. Smith & N.G. Pegg Experimental research and integrated modelling with shell finite elements for sheet roof covering M. Piekarczyk, E. Pięciorak, H. Pasternak & G. Kubieniec Limit load of the panel with elliptical opening G.H. Rahimi, R. Akbari Alashti & M. Arefi Global approach in modelling of riveted joints E. Szymczyk, J. Jachimowicz & G. Slawinski A method for response of stiffened panels subject to combined loading M. Taczała Updating of steel plate FE model on experimental modal pairs K. Wilde & M. Hirsz Stressed skin action of the roof systems with hat-shaped purlins A.M. Wrzesien, J.B.P. Lim & R.M. Lawson


Best Sellers


Product Details
  • ISBN-13: 9781135166878
  • Binding: Digital (delivered electronically)
  • No of Pages: 361
  • Sub Title: Proceedings of the 9th SSTA Conference, Jurata, Poland, 14-16 October 2009
  • ISBN-10: 1135166870
  • Language: English
  • No of Pages: 361


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Shell Structures: Theory and Applications (Vol. 2): Proceedings of the 9th SSTA Conference, Jurata, Poland, 14-16 October 2009
-
Shell Structures: Theory and Applications (Vol. 2): Proceedings of the 9th SSTA Conference, Jurata, Poland, 14-16 October 2009
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Shell Structures: Theory and Applications (Vol. 2): Proceedings of the 9th SSTA Conference, Jurata, Poland, 14-16 October 2009

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!