Physical and Numerical Simulation of Materials Processing
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Physical and Numerical Simulation of Materials Processing
Physical and Numerical Simulation of Materials Processing

Physical and Numerical Simulation of Materials Processing

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

This specialist work comprises 249 peer-reviewed papers on the “Physical and Numerical Simulation of Materials Processing”.

Table of Contents:
Committees Preface Three-Dimensional Thermo-Mechanical Finite Element Simulation for Casting Ladle Structure under Thermal Loadings Experimental Research of Elevated Temperature Creep and Stress Relaxation during Continuous Straightening Derivation and Application for Time Step Model in Simulation of Solidification Process The Computer Solidification Simulation of Oceangoing Freighter Rudder Horn Microstructures of Rapidly Solidified Hypereutectic Al-Si Alloy with Low-Titanium Content Numerical Simulation of Rheo-Diecasting Mould Filling Process of Semisolid Magnesium Alloys Numerical Simulation of Induction Heating Process of Continuous Casting Slab Application of Level Set Method to the Simulation of Liquid-Gas Two-Phase Flow during Mold Filling Simulation of Gas-Solid Two-Phase Flow to Process of Filling the Foam Mould Gate Location Optimization in Injection Molding Based on Empirical Search Method Mold Filling Process Control of Molten Aluminum in Permanent Molds with a Web Gating System Thermal Simulation on Mechanical Properties of Steel Q345 for Continuous Casting Slab Simulation and Investigation on Physical Properties of Continuous Casting Slab AH36 at High Temperature Numerical Study of Liquid Core Solidification in Influence of Soft Reduction Deformation on Steel Slab Continuous Casting Process Numerical Study on Mold Filling Process of Casting Thermal Analysis of Whirling Unit Attached to Thread Whirling Machine Casting Process Simulation of the Ball Milling Machine End Cover with a Hug Diameter Numerical Simulation of Die-Casting Mold Filling Process by Using Fractional Step Method A Cellular Automata Model for Dendrite Structure Simulation Numerical Simulation on the Dendritic Spacing and Microporosity in A356 Alloy Ingot Coupled Numerical Simulation on Heat, Flow and Solution Transport in Double-Stream-Pouring Continuous Casting A New Prediction Way to Shrinkage Cavity Formation for Ductile Iron Castings Microstructure Simulation of Die Casting Magnesium Alloy The Simulation of Thermal Field in Induction Melting with Cold-Crucible and Dual Frequencies Control of Liquid Level in Tundish of Strip Caster with Automatic Pouring System Numerical Simulation of Solidified Structure Formation of Al-Si Alloy Casting Using Cellular Automaton Method Material Constants of Ferritic Spheroidal Cast Iron during Hot Deformation Numerical Simulation and Experimental Method for Auto-Panel Forming Defects Analysis Semi-Enclosed Cold Forging Process Analysis and Progressive Die Design of CPU Fin Numerical Simulation and Structure Optimization of the Main-Control Reversing Valve of Electrical-Hydraulic Hammer Intelligent Control Experiment Study for V-Shape Free Bending of Wide Sheet Metal Forecast of Discharge Voltage for Electromagnetic Tube Forming Based on FEM Analysis Investigation to the Damage Tolerance of Composite Cylinder for Vehicles by Numerical Simulation Research on Closed Die Forging Process of Car Steering Knuckle Study on Effect of Extrusion Velocity on Composites Liquid-Solid Extrusion Process Using 3D Thermo-Mechanical Simulation Torque Strength and Influencing Factors Analysis for Assembled Camshaft by Knurling Joining Study on Mechanical Behavior for Warm Extrusion of AZ61 Magnesium Alloy A Research on Steel Synchronizer Gear Ring's Precision Forging Researches on Rules of the Longitudinal Residual Stress Distribution in Straightening Deformation Zone of Heavy Rail with Multi-Rollers The Application on Initial Design of Auto Panel Based on One-Step FEM Research on Behavior of Slab Surface Defects in Forward Slip Zone during V-H Rolling Process A Goal Oriented Numerical Simulation Approach for Computing Stress Intensity Factors in Bimaterials Finite Element Analysis of Stress and Strain in Two-Wedge Cross Wedge Rolling Step-Shaft Part Analysis of Hammering Deformation Processes by the Dynamic Explicit Finite Element Method Study on Flow Stress Model of a Microalloyed High Strength Steel in CSP Hot Rolling Thermal-Mechanical Analysis of Metal Forming Based on Meshfree Method Finite Element Analysis of Slab Steel in the Process of Induction Heating Research on Fast Calculation of Rigid Plasticity Finite Element Method in Hot Strip Rolling The Finite Element Analysis of Serrated Chip Formation in High-Speed Cutting Auto Panel Dies Hot Stamping Processing Experiments of Quenchable Boron Steel Research on Cold Taper-Rolling Law of the Spiral Blade Based on Finite Element Method Finite Element Analysis of Optimum Back Pressure during Equal Channel Angular Pressing The Contrast Research of the Finite Element Simulation for Ordinary and Fine Blanking with Negative Clearance Die Design of a Back Panel for a PDP TV Using 3-D Elasto-Plastic Finite Element Analysis Metal Flow Behavior on the Non-Uniform Wall Thickness Three-Way Valve Extrusion Hot Forging Process Design Optimization Based on Approximate Model and FEM Simulation Macrokinetics Hierarchies of States at Dynamic Superplasticity Qualitative Physical Modeling and Experimental Study on Forging Method with Horizontal V-Shaped Anvil A Method of Bulge Test for Determining the Work Hardening Characteristics of Sheet Metals Releasing Algorithm for Volumetric Locking in Metal Forming Process Simulation Based on Element-Free Galerkin Method Key Technologies for 3D-FE Modeling of Radial-Axial Ring Rolling Process Numerical Simulation and Response Optimizer Design of Strengthening Effects Induced by Laser Shock Peening Improvement of Consumer Properties and Stability of the Technological Process of Hot Rod Stock Production Spatial Structure Injection Molding Analysis of Suspended Bio-Carriers Simulation of Hydroformed High Strength Steel Chassis Parts Computer Simulation of Metal Forming Processes A New Optimization Method of Constitutive Equation for Hot Working Based on Physical Simulation and Numerical Simulation Process Optimization of Laser Micro-Bending Using iSIGHT Mechanics Analysis and Numerical Simulation on the Precise Forming Process of Spline Cold Rolling Simulation of Molding Flow of Sheet Molding Compound in Complicated Dies Finite Element and Experimental Analysis of Three-Dimensional Flow State of Plastic Melt in Slit Die Section Temperature Prediction of Seven-Pass Finishing Rolling of Hot Thin Strips by FEM Research on the Intramode Canning Hot Forging Process for Mn18Cr18N Retaining Ring Research of Favorable Conversion of Friction during Powder Compaction Simulation of Three-Dimensional Stress Distribution in Compression Dies Simulation of the FGH96 Superalloy Microstructural Changes under Different Deformation Conditions Investigation into the Warm Extrusion for Micropart with Laser-Aided Heating Method Strength Analysis of Elastic Bar Based on ANSYS Simulation Investigation on the Key Technologies of Mechanical Expanding of Large Diameter LSAW Pipe Shrinkage Optimization of Flat Receptacle Using the Finite Element Method Numerical Simulation of Wire-Rod Hot Continuous Rolling Process with Multi-Field Coupling Investigation of Relationship between Material Flow Direction and Local Stress Field in Plastic Deformation Heat-Stress Fields Numerical Simulation of Aluminum Profile Extrusion by Porthole Die A Mathmatical Approach for Modeling Real Hot Forming Process Using Physical Simulation Results Elasto-Plastic Dynamic Explicit Analysis of Cold Ring Rolling Process Numerical Simulation Analysis on Cold Closed-Die Forging of Differential Satellite Gear in Car Fast Prediction of Springback at Product Design Stage for Sheet Metal Forming 3D Thermal Mechanical Coupled Elasto-Plastic Finite Element Analysis in the Whole Rolling Process of H-Beam Modeling Stress Strain Curves for Nonlinear Analysis Rheological Models as the Basic Element of Metal Forming Processes Simulation Deforming Mechanisms of Two-Pass Drawing Process of an Aluminum Tube from Circular to Rectangle Section Investigation of the Billet Deformation Process in the Dies with Elastic Elements Realizing a Cross and a Longitudinal Shear Numerical Simulation on Pharmaceutical Powder Compaction The Establishment of Mathematics Model of Velocity Field in Strip Cast-Rolling Deforment Area Numerical Simulation on Laser Peen Forming of Sheet Metal A 3D Rigid-Plastic FEM Simulation on Radius of Incremental In-Plane Bending of Strip Metal Prediction of Rolling Force during Temper Rolling The Innovative Production Developments in Sheet Hydroforming Research on Simulating of Controlled Rolling and Controlled Cooling Process for Mo Micro-Alloy Steel Application Research on Expert System of Incremental In-Plane Bending Deformation Pattern of the Large Generator’s Retaining Rings during Hydraulic Bulging Strengthening Density Functional Theory Applying in the Computation to the Properties of Copper Surface Finite Element Simulation for Evolutions of Profiles during Hot Compression Simulation of Internal Stress in Injection Molded Parts A Study of the Microstructure and Grain Size at the Welding Heat Affected Zone of a Ferrite Stainless Steel Study on Temperature Distribution of Plasma Surface Alloying Furnace Reliability Calculation of Welded Pressure Pipe with Circumferential Crack Based on 3-D Elastic-Plastic SFEM Numerical Simulation of Basal Parameters for Fatigue Evaluation of Electromotor Rotor Welded Structure Numerical Simulation of Temperature Field and Stress Field of Electron Beam Brazing Stainless Steel Radiator The Research of a Pulse Laser Powder Materials' Sintering Process Numerical Simulation on Temperature Field of Electron Beam Welding of Magnesium Alloy and Study on Properties and Microstructure of Joint Numerical Simulation of Residual Stress in the Glass-to-Metal Diffusion Seals Investigation of the Influence of Shot Peening on Stress Corrosion Cracking of Stainless Steel Welded Joints Numerical Simulation of Laser Surface Micro-Texturing Analysis and Evaluation for Usability of the Low Hydrogen Type Structural Steel Covered Electrode Investigation on M-A Constituent in Weld CGHAZ of High-Strength Microalloyed Steel FE Simulation of Complex Contour Forming of Sheet Metals Based on Laser Bending Numerical Analysis on Temperature Field of Axial Alternating Magnetic Field-Assisted Electric Field-Activated Sintering Investigation on the Simulation System of GTAW Operation Based on Virtual Reality Technology Numerical Simulation and Analysis of Flow Field in TIG Arc Brazed Filler Metal Droplet Quality Measure and Control System for the Whole Process of Arc Welding Research on One New Type of Rapid Prototyping Based on Laser-Induced Chemical Liquid Deposition Simplified Heat Model of the Weaving Welding Processes Grain Refinement Behavior of Pipeline Steel in Welding Heat Affected Zone Numerical Simulation of Welding Residual Stress and Post-Weld Heat Treatment for Dissimilar Steel Welded Joint The Electrical Contact Resistance in Resistance Welding Evaluated by Gleeble Testing Machine Numerical Modeling of High Power MAG Welding on the Plate Analysis of Arc Welded Thin-Walled Cylinders to Investigate the Effects of Welding Process Parameters on Residual Stresses Optimization of Welding Process Parameters for Rotating Arc Welding Sensor Based on Genetic Algorithm Numerical Simulation on Temperature Field in Laser Welding for Aluminum Alloy with Different Thickness Evaluation of Corrosion Property for Repair Welding Zone of Exhaust Valve Numerical Simulation of Pulsed Arc Welding by Melting Electrode Numerical Simulation of Hydrostatic Extruding Cu/Al Bimetal Clad through Equal-Strain Contour Concave Die A Study on Numerical Analysis and Residual Stress Evaluation of Welded Joint Overview of Modeling Strength Evolution during Friction Stir Welding Numerical Computation of a Linear Friction Welding Process The Simulation of Residual Stress for Stud Welding and Establishment of Strength Estimating Model The Application of Welding Heat Cycle Computer Software NiCr Alloy Coating Deposited on the Surface of 35CrMo Steel by the Electrospark Process Computer Simulation of Thermo-Mechanical Processes at Fusion Welding of Alloyed Steels Gas Tungsten Arc Welding and Hybrid Laser-TIG Welding Temperature Field Analysis of AZ31B Magnesium Alloy Study on Computer Emulation of PTFE’s Wearability Improvement by Al3+ Ion Implantation Influence of Temperature on Field-Induced Reorientation Strain in Magnetic Shape Memory Alloy Application and Research of Numerical Simulation for Rubber Like Material with MSC.Marc Optimization Design for the Interface Modulus of Csf/Al Composite A Study of the Environment–Friendly Chrome-Free Chemical Conversion Coating on 2024 Aluminium Alloy Numerical Simulation of Interfacial Bonding Degradation of Composites under Two-Stage Loading Study on the Freeze-to-Crack Test of Asphalt Modified by Waste-PE in Packing Mullite Interlayer of C/Si-C-N Composites Fabricated by PIP Numerical Simulation of Thermal Induced Crack Propagation in Laminated Composites Modified Tartagli Method for Calculation of Jominy Hardenability Curve Study on Deformation Induced Ferrite Transformation in Mild Steels with or without Niobium Determination of the Kinetics for Dynamic and Static Recrystallization by Using the Flow Curves Microstructures and Toughness in Simulated Coarse Grain Heat-Affected Zones of Copper-Bearing Steel Structure Optimization in the Stacked Package of IC Microstructures Influence of Delamination of Epoxy/Dielectric Interfaces on Pattern Shift and Passivation Cracking under Aeronautical Conditions (225)A Martensite Transformation and Kurdjumow-Sachs Mechanism Numerical Modeling of the Electrical Resistivity of Carbon Black Filled Rubber Numerical Simulation of Thermal Stress Fields during Gas Quenching Effects of Thermal Treatment on the Morphology and Properties of CSM/Poly(Urethane-Isocyanurate) Composites Formed by SRIM Process High Temperature Mechanical Behavior of 16Mnq under Constant Constraint Conditions Phase Formation and Structure of Mullite-Alumina-Zirconia and Spinel-Enstatite Ceramics Developed from Synthetic and Mineral Raw Materials Mechanical and Processing Characterisation of Effective Behaviour of Wood-Plastic Composites by Analytical and Numerical Simulation The In Situ Study on the Micro-Structural Characters of IF Steel at Early Stage of Recrystallization Using High-Energy X-Ray Topology Optimization of Orthotropic Material Structure Investigating the Mechanical Property and Rolling Contact Fatigue Life of Diamond-Like Carbon Films on Bearing Steel Finite-Element Analysis of Thermal Stresses in Diamond Film Deposition on Mo Substrate with Ti Interlayer Application of Physical Simulation for Developing New Steel Types Dislocation Distribution Function of Two Fracture Dynamics Problems Concerning Aluminum Alloys A New Optimization Algorithm for Inverse Analysis to Material Parameters Nonlinear Bending of the FGM Circular Plates with Temperature-Dependent Properties Influence of Ceramic Aggregate on the Microstructure of Filtration Materials The Effect of Nonequilibrium Structure State on the Creep and Superplastic Behaviour of Materials Research on the Accurate Control of Initial and Finishing Cooling Temperatures for X70 Pipeline Steels Residual Stresses of Fiber-Reinforced Functionally Graded Composites Research on Creep Constitutive Model of TC11 Titanium Alloy Based on RBFNN Hot Ductility of Fe-18Cr-12Mn-0.55N High Nitrogen Austenitic Stainless Steel Simulation of Intercritical Austenization of a C-Mn Cold Rolled Dual Phase Steel Research on Heat Treatment Techniques and Structure Properties of CuNi2TiCrZr Alloy Effect of Molybdenum on Hot Deformation and Processing Maps of Austenitic Stainless Steels Physical Simulation of Dynamic Recrystallization Behavior of 7050 Aluminum Alloy Study on Preparation of Ti Powder by Self-Propagating High-Temperature Synthesis (SHS) with Magnesiothermit Reductive Process Effect of Zinc Content on the Ageing Behavior of Al-Zn-Mg-Cu-Li Alloys Effects of Gas Multicomponent Thermochemical Treatment Process on Structure and Properties of Steel 20 Study on High Temperature Mechanical Properties of Bearing Steel GCr15 Predicting Modulus of Elasticity for Wood-Based Composites Amorphous Compositions for Production of Thick Films Achieving the Dual Phase Structure in Low Alloyed Steel with Slow Cooling Rate Influence of High Shearing Stress-Induced Strengthen Effect on GF/HDPE Composites Computer Simulation of Heat Treatment Process for 125MN Plunger Simulation of the Processes of Aluminum Alloys Preforms and Semifinished Products Manufacture under Influence of Technological Heredity and Phase Transitions Finite Element Simulation for Forging Process Using Euler’s Fixed Meshing Method Research on the Mechanisms of Laser Forming for the Micro-Structural Element Application of Time-Ageing Time and Time-Temperature-Stress Equivalence to Nonlinear Creep of Polymeric Materials The Influence of Temperature on Cr-Ti Coating in Carbon Steel A Study on Fatigue Crack Propagation Properties Using the X-Ray Diffraction Method A Study on Tribology Characteristics of SM53C by High Frequency Heat Treatment The Austenite Inverse Phase Transformation Quenching in Zero Time Holding of 20MnV Steel Comparison of Microstructural Aspects by Electron Microscopy Observed in Al-Mg Based Alloys Obtained by Conventional and P/M Processes After Thermomechanical Treatments The Corrosion Behaviors of Heat-Treated SAE 8620 Steels Displacement Field Simulation and Deformation Prediction of Longitudinal Straight Seam Welding of Thin-Wall Aluminium Alloys Cylinder Simulation of Mold Filling and Solidification on Gravity Casting of Al-Si Alloy (A357) A Study on Constitutive Model and Parameters of Rock Slope Stability Analysis and Simulation of Sensor Structure Parameters and Filling Materials Characteristics for Electrical Capacitance Tomography System Pad Effects on Slurry Flows in CMP System Dynamic Characteristic Analysis of the Micropump Considering the Diaphragm Stiffness Numerical Simulation of Gas-Solid Flow in a Precalciner of Cement Industry Thermodynamic Analysis of Friction Pairs inside a High Temperature Flow Rate Control Valve for Scramjet Engines Application of RFPA2D in Sublevel Caving Mining Extra-Thick Coal Seams The Fabrication of 2-D Global Fiducial Grid with High Resolution for Spatial Phase Locked e-Beam Lithography Analyses of the Influencing Factors of Rotating Impeller Degassing Process and Water Simulation Experiment Modelling Fabric’s Optical Behaviors Study on Medicinal Properties of Red 1%NaOH Extractives of Castanopsis Fissa Wood by GC/MS The Effects of Substrate Temperature on the Residual Stress for EBPVD TBCs Study on Temperature Distribution in Double Glow Discharge Zone Stability Analysis of Diversion Tunnels in Jinping II Hydropower Station Project Study on Method of the Multi Control Task and Synchronized Data Acquisition of the Themo-mechanical Simulator Analysis and Experiments of Eddy Current Brakes with Moving Magnets Flashover Condition Analysis on Passenger Carriage Fire by Using Swallowtail Catastrophe Theory Numerical Simulation of Temperature Distribution in Conductive Asphalt Solar Collector due to Pavement Material Parameters Study on Healthful Function of Superheated Water Extractives of Phyllostachys Heterocycla by GC/MS Determination of Chemical Components of Red 1%NaOH Extractives of E. Urograndis Wood by GC-MS An Abrasive Wear Model of Interpenetrating Composites The Effect of Temperature and Content of Conductive Filler on the Conductivity of Conductive Rubber Study of Electroplating Zn-Sn-Ni Alloy The Influence of Surveying Method on Mechanical-Electrical Properties of Smart Mortar Calculation on Temperature Rise of CMP Process: Roughness Effects Considered Weight Calculation of Steel Pipe by Visual Basic Programme Research on the Proper Selection of Soil Constitutive Relation in Modeling Underground Excavation Research on Hydrogen Induced Cracking of 08Cr2AlMo Steel Based on the Empirical Electron Theory A FEM Study on Chip Formation in Orthogonal Turning Nickel-Based Superalloy GH80A Numerical Analysis of Electromagnetic Field of Solid Rotor Asynchronous Permanent Magnetic Coupling by Finite Element Method Comparison between Plasma-MIG and MIG Procedures on 5A06 Aluminum Alloy Numerical Simulation for Low Pressure Die Casting of Al-Alloy Motor Enclosure and Technology Improvement Investigation of Forming Conditions on Microstructure Development and Mechanical Stability of Trip Steel Analysis of Worm Cutting Characteristics in Whirling Process Analysis on Section Effect of Heavy Plate by Finite Element Method during Controlled Cooling Effects of Vanadium and Rare-Earth on Carbides and Properties of High Chromium Cast Iron The Multi Physical Fields Modeling for 7B50 Aluminum Alloy Semi-Continuous Casting Process Development and Application of Experimental Facilities for Steel Forming The Multi-Scale FEM Simulation of Wire Fracture during Drawing of Perlitic Steel Research and Simulation of Influence of Different Pressing Velocity on Powder Metallurgic Products Properties Impact of Rolling Conditions on Propagation of a Potential Crack Applications of Dyes in Material Science Research Finite Element Analysis on Microstructure Evolution of Hot Ring Rolling Process Finite Element Analysis of the Rolling Contact Fatigue Life of Railcar Wheels Effect of Scanning Frequency on Temperature Distribution Study on One Kind of Antenna Radomes Materials Numerical Algorithm Simulation Based on DBEM Diffusion Interaction between Two Metals, One of Which is in Liquid State The Study of Thermal Boundary Condition for CFRP Pressure Vessel with Metallic Liner during Manufacture Process Numerical Simulation of Process of Cavity Filling and Solidifying in TiAl Alloy Investment Casting


Best Sellers


Product Details
  • ISBN-13: 9783038131748
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3038131741
  • Publisher Date: 08 Apr 2008
  • Binding: Digital download and online
  • No of Pages: 1570


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Physical and Numerical Simulation of Materials Processing
Trans Tech Publications Ltd -
Physical and Numerical Simulation of Materials Processing
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Physical and Numerical Simulation of Materials Processing

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!