Materials Science and Processing, Environmental Engineering and Information Technologies
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Mechanical engineering > Materials Science and Processing, Environmental Engineering and Information Technologies
Materials Science and Processing, Environmental Engineering and Information Technologies

Materials Science and Processing, Environmental Engineering and Information Technologies

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Collection of selected, peer reviewed papers from the 2014 International Conference on Application of Materials Science and Environmental Materials (AMSEM 2014), July 4-6, 2014, Yichang, Hubei, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 156 papers are grouped as follows: Chapter 1: Materials for Mechanical Engineering and Technologies of Materials Processing, Chapter 2: Building Materials and Construction Technologies, Chapter 3: Chemical Materials and Chemical Engineering, Chapter 4: Environmental Friendly Materials, Chapter 5: Prevention of Pollution the Water Environment and Processing of Wastewater, Chapter 6: Solutions in Environmental Engineering, Chapter 7: Engineering Solutions in Mechanical Engineering, Chapter 8: Applied Information Technologies, Communication and Data Processing

Table of Contents:
Preface and Organizing Committee Chapter 1: Materials for Mechanical Engineering and Technologies of Materials Processing Wear Behaviors of PCBN Tools in Interrupted Turning Hardened Steel with Tool’s Chamfer Angle and Edge Preparation Considered Sintering of Frustum Shaped Polycrystalline Diamond Compact at Non-Hydrostatic Pressure Experimental Research on Fabrication Process of Metal Powder for SLS Hot Sizing Experiment Study of TC4 Titanium Alloy Bending Plate Finite Element Analysis of Coating Interface Stress Field of Laser Cladding CBN Coating on Titanium Alloy Dynamic Performance at Inner Tip of an Interfacial Crack near a Circular Cavity in Piezoelectric Bi-Materials Target Curve Setting Model for Automatic Flatness Control on Stand 5 of 2180 mm Tandem Cold Rolling Mill Synthesis, Characterization and Smart-Release Organic Inhibitor for Anticorrosion Coating Progress on the Precious Metals Used in High-Temperature Protective Coatings Erosion Resistance of TiB2 Particla Reinforced Metal Matrix Composite Coating High Temperature Oxidation Studies of Al Coating Deposited by Magnetron Sputtering Process Parameters Optimization of Plasma Spraying Nanostructured Coating Based on Particle Swarm Optimization Algorithm Influence of Grain Size on Bake Hardenability for Low Carbon Steel by Internal Friction Method State Analysis and Life Evaluation on Reformer Furnace Pipe Used for 100000hrs Sintering of Fine Grained Polycrystalline Cubic Boron Nitride Compacts without Binder Study of Process of Hot-Dipped Galfan Coating on Q235 Structural Steel Metal/Ceramic Laminar Composite Immersion Heater for Heating Hot Dip Galvanizing Zinc Kettle Influence of pH on Electroless Ni-P-γAl2O3 Composite Plating on AZ91D Magnesium Alloy by Ultrasonic Wave Fabrication of Artificial Periodic Defects in Colloidal Photonic Crystals by Photolithography Research on the Surface Topography Model of Galvanized Steels in Sheet Metal Forming Corrosion Resistance Dependence of Rare Earth NiCrMoY Alloy Coatings Simulation of InAIN/Si Single-Heterojunction Solar Cells Using wxAMPS A Novel Nickel/Iron-Layered Double Hydroxide for Supercapacitors Fabrication and Microstructure of Ge-Sb-S-CsCl Chalcogenide Glass Containing β-GeS2 Nanocrystals Theoretical Study of the Electronic Structures of Na-Doped ZnO Analysis on the Anodizing Process of AZ31 Magnesium Alloy in an Environmental Friendly Alkaline Electrolyte Molecular Modeling of the Mechanical Effect in the Chemical Mechanical Polishing Process Effect of Rapid Thermal Annealing on Resistive Switching Uniformity of HfAlOx Based RRAM Devices Chapter 2: Building Materials and Construction Technologies Review on Chloride Penetration of Recycled Aggregate Concrete Research on Strength Properties of Concrete Using Aggregates from Repeatedly Recycling Concrete Waste Studies on Key Technology and Toughness of Super Sulfate Cement-Based Compound Materials Research on Carbonation of Recycled Aggregate Concrete Using Different Recycled Concrete Aggregates Research on Frost Resistance of Recycled High Performance Concrete On Properties of Recycled Fine Aggregate for Structural Concrete from Repeatedly Recycling Concrete Waste Cathodic Prevention and Cathodic Protection of Zinc Mesh Sacrificial Anode for Reinforced Concrete in 15% Salt Water Preparation and Mixture Ratio Design of Foam Concrete with Lightweight Tailings The Test Research on Non-Destructive Concrete (Gravel) Strength Survey of Rebound Method Based on SVM Discussion the Rheological Properties of Asphalt Rubber Fire Resistance Test of Concrete Composite Box Steel Girder Floor System The Influence of Different Hydrophobic Agent on the Water Absorptivity of Foam Concrete Finite Element Analysis of Lightweight Energy-Saving Composite Floor The Mechanical Properties of Lightweight Concrete under Different Factors Experimental Study on the Mechanical Properties of Renewable Rubber Building Template The Experiment Study on Parameters of Duncan-Chang Model for Silt Based on Different Water Content The Mechanical Properties of Different Soil Moisture Content of Silt Study Based on the Experimental Mechanical Properties and Permeability of Previous Color Recycled Aggregate Concrete The Dam Anti-Seismic Dynamic Analysis of Wangwu Reservoir Reinforcement Project Chapter 3: Chemical Materials and Chemical Engineering Study on Separation/Enrichment of Trace Nickel in Water Samples Using Ammonium Sulfate-Dithizone-Cetyl Trimethyl Ammonium Bromide System Tungsten Ionic Liquid: Synthesis and Physicochemical Property Intrinsic Kinetics of Coking Crude Benzene Hydrodesulfurization on a Ti Modified Co-Mo-P/γ-Al2O3 Catalyst Colloidal Dispersion of High Solid Loading ZnO Powders with 2 wt% Al2O3 Stabilized with Polyelectrolyte Preparation and Characterization of Polymerized Rosin/Polyacrylates Composite Miniemulsions Kinetic Investigation of Thermal Decomposition Reaction of Ethane-1,2-Diamine Copper(II) Chloride, C2H8N2CuCl2 A Novel Hexaaluminate Material: Preparation, Characterization and Catalytic Activity in Methane Combustion Synthesis and Characterization of Manganese Phosphate Aluminosilicate Molecular Sieve Research of Chemical Coloring Technology on Pure Copper Preparation of a Novel Composite Nanofiltration Membrane The Structure and Properties of Lysine Doped Polypeptide Modified Polypyrrole Nanoparticles Thermal-Oxidation Degradation and Evaluation of Non-Durable Non-Woven Fabrics Formation and Photo-Degradation Performance of Titania Nanotubes Photocatalytic Water Splitting over Ag/TiO2 Nano-Wire Films Synthesis and Optical Properties of Copolymeres Bisphenol A and D-Π-A Chromophores Preparation of ZnAc/PVP Composite Fibers and ZnO Nanofibers Synthesis and Electrochromic Properties of Fluorescent PEDOT/PSS Composite A New Intumescent Flame Retardant on Epoxy Resin Molecularly Imprinted Solid-Phase Extraction: Extraction of Traditional Chinese Medicine Active Ingredients P-Toluene Sulfonic Acid Doped Polyaniline/Carbon Nanotube Nanocomposites by a Sequential Doping-Dedoping-Redoping Process Mechanical Properties of Fumed Silica/PP Composites Inhibition of TGFα-Saporin on Neointimal Hyperplasia via Inhibiting Smooth Muscle Cells Proliferation and Promoting its Apoptosis Synthesis and Characterization of Carboxyl-Terminated Hyperbranched Polyester Melting and Crystallization Properties of Crystalline/Crystalline Blends of Poly(Trimethylene Terephthalate) and Poly(Ethylene Terephthalate) Preparation of Polyethylene with Vanadium/Titanium Bi-Metal Ziegler-Natta Catalysts Desulfurization of Model Gasoline by Adsorption Process with Ruthenium Ion Modified Y-Zeolites Effect of Nano-Calcium Carbonate on the Mechanical Properties of Polypropylene Morphology, Mechanical and Thermal Properties of the Blends of Poly(Trimethylene Terephthalate)/Acrylonitrile-Styrene-Acrylic Copolymer Chapter 4: Environmental Friendly Materials Design and Development of Crystal Eco-Brick Shell Synthesis and Characterization of Photocurable Biodegradable Elastomers Construction of cDNA Library of Hansenula anomala The Characterization of Chitosan Nanoparticles by Raman Spectroscopy Electrospinning of Poly(Lactic Acid)/Poly(Lactic Acid-Co-Lysine) Blend Effect of Sodium Benzoate on the Crystallization Behavior of Poly (3-Hydroxybutyrate-Co-4-Hydroxybutyrate) Preparation Eco-Cement with Semi Dry FGD Ash from Steel Plant Fabrication of Non-Load Bearing Cotton Stalks Bales and Pressure-Resistant Property Test Study on Characteristics of Lactobacillus rhamnosus on Lactic Acid Fermentation with Different Substrates Synthesis of Composite TiO2/Natural Cotton Cellulose Nanofiber with Photocatalytic Property Chapter 5: Prevention of Pollution the Water Environment and Processing of Wastewater Phosphorus Speciation and Vertical Variation in Sediments from Lake Baihua Determine the Moisture Distribution in Sewage Sludge by Drying Differential Investigation on Treatment of Phosphate-Containing Waste Water by Pyro-Modified Fly Ash Source of Heavy Metals in Sludge of Huoshaogou Wetland Park in Xining The Study of Denitrification Rate and N2O Release Rate in Shuangtaizi Estuary Wetland Water Pollutant Control for a River-Lake Region to the Northwest of Lake Taihu Impact of Nutrients and Temperature on Algal Growth and Relative Abundance of Xixi Wetland, China Study on Treatment of Landfill Leachate Using an Integrated KMnO4 Oxidation and Diatomite Adsorption Method Research on the Mechanism of Sulfate Pollution of Groundwater in Jiaozuo Area Research Progress of Coal Flocculat in Recent Years Improvement Measures of ORP in Subsurface Wastewater Infiltration System The Research on Anaerobic Bio-Hydrogen Production Using UASB Reactor from Molasses Wastewater Comparison of THMs Formation between Chlorination and Chloramination of Simulated Water with TiO2 and UV Pretreatment Effect of Cyclodextrins on Photodegradation of 4,4-Bis(4-Hydroxyphenyl)Pentanoic Acid under UV Irradiation Section Turbulent Distribution of the Stratified Shear Flow in the Braided River Distribution and Pollution Assessment of Heavy Metals in Surface Sediment in Yellow River Estuary and the Adjacent Sea Area Effects of Nitrate Concentration on Heterotrophic Denitrification in Wastewater Using Poly (Butylene Succinate) as a Carbon Source and Carrier Removal of Methylene Blue from Aqueous Solution by a Novel PAA@Fe-Si Composite Material Photocatalytic Degradation of Methyl Orange by Cu2O-MoO3 Screening and Characterization of a Bacterium Capable of Simultaneous Heterotrophic Nitrification and Aerobic Denitrification at High Concentrations of Ammonia-Nitrogen Fixed-Bed Adsorption of Methylene Blue from Aqueous Solutions by Porous Starch Selective Removal of As(V) from Aqueous Solutions Using Magnetic As(V)-Imprinted Polymers with Combination of Two Functional Monomers Electrodeposition of Porous Polyaniline Coating on an Etching Stainless Steel Wire as a Fiber for Solid-Phase Microextraction of Triclosan and Chlorophenols in Water Samples Chapter 6: Solutions in Environmental Engineering Distribution and Fractionation of Lead and Cadmium in a Long-Term Zinc Smelting Areas High Effective Utilization of Metallurgical Solid Waste in Pelletizing Process Ecological Risk Assessment of Oxytetracycline Bacteria Residue in the Process of Fertilizing Calculation of Carbon Dioxide Emission in Nanjing City and its Influencing Factors Catalytic Oxidation Removal of HCN in Tail Gas Haze Formation and the Influence of Ethanol Gasoline of Severe Cold Area on Haze Microbial Properties and Degradation of Polycyclic Aromatic Hydrocarbons in the Contaminated Farmland Soil with Bioremediation Research on a "Green" Industry Chain of Phosphate Fertilizer Growth and Physiological Effects of Model Acid Rain and Lead Contamination to Tall Fescue Seedlings Investigation on Soil Physiochemical Properties and Heavy Metal Contamination Characteristics in Two Types of Sites Application of Machine Vision Coupling Pattern Matching Technology in Environment Design Inhibitory Effects of Aqueous Extracts from Leaves of Common Tropical Green Plants on Nitrification in Soils Predicting Carcinogenicity of Anilines by Quantitative Structure-Toxicity Relationship Harvesting of Polycyclic Aromatic Hydrocarbons (PAHs)-Degrading Bacteria by Magnetic Flocculation QSTR Study for the Carcinogenicity of Alkylbenzenes Quantitative Structure-Toxicity Relationship for Predicting Acute Toxicity of Alkylbenzenes Photodegradation of Bis(4-Hydroxyphenyl) Methane Based on the Inclusion of Two Cyclodextrins under Ultraviolet Irradiation Adsorption of Bisphenol A from the Solution by β-Cyclodextrin Modified TiO2 Effect of ZnO Nanoparticles on Medicago sativa at the Germination Stage Chapter 7: Engineering Solutions in Mechanical Engineering About Discretization of the Horizontal Drill-String Model with Uncertainty on the Frictional Force by the Lumped Parameters Method Stability Analysis of Drill Rods as Shells in the Gas Stream Double-Rotor Continuous Mixer Mixing Rubber Components of a Computer Simulation Analysis Design and Drop Test of Aircraft Landing Gear’s Shock Absorber Based on Magnetorheological Damper Characteristics Study of Sewage Source Heat Pump System Based on Heat Transfer Enhancement and Acoustic Cavitation Decontamination The Combustion and Emission Characteristics of Rapeseed Oil/Diesel Blended Fuel Performance Improvement of Dye Sensitized Solar Cells by Using a Novel Operation Mode PID and LQR Control for Two-Wheeled Vehicles with Hand Sensors A SAW Filter of Elliptic Structure IDT Outdoor Mobile Robot Navigation System Based on BCI and Dual Laser Radar The Design of Control System of Cursor Movement Based EEG Chapter 8: Applied Information Technologies, Communication and Data Processing Sparse Incremental Delta-Bar-Delta for System Identification A Leakproof Secret Sharing Scheme Based on Environment Sensing Key Management in Wireless Sensor Networks: Development and Challenges A Proposed Architecture for Instrumentation Cloud Rule Extraction Based on Interval-Valued Rough Fuzzy Sets The Analysis of the Loss Rate of Information Packet of Double Queue Single Server in Bi-Directional Cable TV Network Regional Economic and Social Harmonious Degree Evaluation Model Using Intuitionistic Fuzzy Set The Application of Image Entropy in the Recognition of Free Fluid Spread Motion The Collaborative Exploitation of Vehicle Electrical and Electronic Research on the Simulation Technology of Virtual Hand Interventional Manipulation in the Virtual Environment Feature Extraction Method for Network Intrusion Detection Based on RS-KPCA Rigid Medical Image Registration Based on Genetic Algorithms and Mutual Information The Research of Reconfigurable Embedded System Based on FPGA Study on the Optimal Image Resolution for Image Segmentation FPGA-Based Dual-Polling Control System Design in WSN Research of Drug Name Entity Recognition Based on Constructed Dictionary and Conditional Random Field Improvement of Clustering Algorithm for WSNs Enhancing Operations of Supply Chain Management through a Responsive Information Framework


Best Sellers


Product Details
  • ISBN-13: 9783038266549
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 303826654X
  • Publisher Date: 01 Oct 2014
  • Binding: Digital download and online
  • No of Pages: 786


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Materials Science and Processing, Environmental Engineering and Information Technologies
Trans Tech Publications Ltd -
Materials Science and Processing, Environmental Engineering and Information Technologies
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Materials Science and Processing, Environmental Engineering and Information Technologies

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!