Materials Science and Engineering II
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Materials Science and Engineering II
Materials Science and Engineering II

Materials Science and Engineering II

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Selected, peer reviewed papers from the 2nd International Conference on Materials Science and Engineering (ICMSE2013), March 8-10, 2013, Jiujiang, China. The papers are grouped as follows: Chapter 1: Composite Materials and Technologies; Chapter 2: Chemical Materials and Technologies; Chapter 3: Polymer Materials and Technologies; Chapter 4: Material Removal and Processing Technologies, Recycling Applications; Chapter 5: Nanomaterials and Nanotechnologies; Chapter 6: Control and Guided Systems; Chapter 7: Advanced Technologies in Manufacturing, Mechanical Engineering and Industry, Design, Modeling, Analysis and Simulation; Chapter 8: Dynamics and Mechanics of Physical Prosesses and Behavior in Manufacturing and Materials; Chapter 9: Materials Optical, Magnetic and Electrical Properties and Technologies, Films and Devices Applications; Chapter 10: Alloys, Steel Materials and Technologies; Chapter 11: Biomaterials, Natural Materials and Technologies; Chapter 12: Automation, Optimization, Algorithmes in Manufacturing and Industry, Applications.

Table of Contents:
Preface and Sponsors Chapter 1: Composite Materials and Technologies Preparation and Tribological Behavior of Self-Lubrication Composites Ni-W-Cr-Fe-Cu-MoS2-Graphite at Elevated Temperature Preparation and Performance Evaluation of Chitosan Local Medicine Composite Membrane Material Preparation and Photocatalytic Activity of TiO2/Opal Composite The Preparation and Dielectric Properties of BT/PANI/PVDF Composite Effects of Compounding Addition of Sintering Aids on DC Bias Superposition Characteristic of NiCuZn Ferrites Antibacterial Activity of TiO2/AgY Composite Materials Photocatalytic Activity of Ag2S/K2Ti4O9 for Rhodamine B Degradation under Visible Light Illumination Phase Structures and Mechanical Properties of SGF/PP Composites with and without Compatilizers Cell Structure Refining Mechanism of Pure Aluminum Foam with Fine Cell Structure Thermal Storage and Release Properties of Aluminum Foam - Paraffin Composite Phase Change Materials Pavement Performance of Low Dosage Cement Stabilized Gravel Powder Mixed with Aggregates Flame Retardant Properties of Two Different Synthetic Process of Ammonium Polyphosphates Water-Soluble Substance: Characteristics and Effects on the Properties of Natural Rubber Latex A Preliminary Research on Alkali-Activated Slag Concrete as Tunnel Lining in Severe Frigid Regions PZT / MWNTs / EP Piezoelectric Damping Composites Conductivity and Dynamic Mechanical Analysis Effect of Surface Modified Foamed Fe Powder on Tribological Properties of Semi-Metallic Friction Material Nano-HA Preparation and its Effects on Mechanical Properties of nHA/PLLA/PES Composite Biomaterials Compatibility and Crystallinity of Electrospun Aligned PHBV/PEG Ultrafine Fibers Scaffolds The Bioactivity of Gradient Composite Bioceramic Coating with La2O3 Fabricated by Wide Band Laser Cladding Study on New Industrial Briquette Composite Binder Using Response Surface Methodology Study on Stress Measurement of the MSG Magnetic Measurement Stress Sensor Based on Composite Properties of Materials Photocatalytic Degradation of Indigo Carmine by ZnO-Cu2O/Graphene Oxide Composites Synthesized via Hydrothermal Method Computational Study on Triphenylamine-Based Dyes Containing Benzimidazole Units for Dye-Sensitized Solar Cells The Process Research on VN-Making which Deploy Vanadium Pentoxide Powder, Graphite and Carbon Black in the Lab Chapter 2: Chemical Materials and Technologies Soot Formation in Propane/Air Diffusion Flames Preparation of Melamine Molecularly Imprinted Polymeric Microspheres by Two-Step Seed Swelling Polymerization The Saponification Extraction Process and Result Analysis of Rare Earth Organic Phase Degradation of Indoor Ammonia Using TiO2 Thin Film Doped with Iron(III) under Visible Light Illumination The Study on the Treatment of Nitrobenzene Wastewater by Heterogenious Catalysts and Electrode Oxidation Synthesis of Copper Complexes of Poly [2-(dimethylamino ethyl methacrylate)-B-Poly (oligo (ethylene glycol) monomethylether methacrylate-B-Poly [2-(dimethylamino ethyl methacrylate) Preparation of Cryolite from Industrial Grade Sodium Fluorosilicate An Enzyme-Catalytic Chemiluminescence Method for Detection of Ethanol Using HAuCl4-H2O2-Luminol System Biodiesel Production through Direct Transesterification of Microalgae with Alcohol via Ultrasonic Wave Investigation of Potentiostatic Electrodeposition of Ir in LiCl-KCl Molten Salt Emission Characteristics of Particulate Number in an On-Board Test of a Diesel Passenger Car Fueled with Biodiesel Investigation of the Solubility and Absorption Rate of CO2 in DEA Promoted K2CO3 Aqueous Solution Effects of Different Sodic Deflocculants on Rheological Properties of Acid-Resistant Overglaze Slip Physicochemical and Slow-Release Antibacterial Properties of Clove Oil/β-Cyclodextrin Inclusion Complex Flotation Test Research on Refractory Copper Oxide Ore by Using Combined Activators Effect of Black Carbon in Soil and Sediment on Organic Chemical Sorption and Carbon Sequestration Replica Exchange Molecular Dynamics Simulations of Coarse-Grained Polymethylmethacrylate Chains Selection of Dehydration Temperature to Prepare Ammonium Polyphosphate with Crystalline Form V by Phosphoric Acid Process Pereparation of Hollow Silica Core/Mesoporous Silica Shell Monodisperse Uniform Spheres Study on Treatment of Ammonia Nitrogen Waste Water by Zeolite-Granule-Adsorbent Chapter 3: Polymer Materials and Technologies A Fast Responsive Thermosensivtive P(NIPAM/AA-Na) Hydrogel and its Fire Suppressing Experiment Research on Performance of Epoxy Electronic Packaging Materials Preparation and Capacitive Properties of Polyaniline/Au Film Kinetics and Substrates Optimization on a Facultative and Methanotrophic Bacterium Removal of Chromium from Aqueous Solution by Polymer Enhanced Ultrafiltration Using Copolymer of Maleic Acid and Acrylic Acid Synthesis of RAFT Molecularly Imprinting Polymer Based on Ionic Liquid Synthesis and Properties of Novel Polymer Electronic-Phosphorescent Materials Temperature Dependent Photoluminescence from Polysilsesquioxane Xerogels Preparation of Two Novel Ionic Electroconductive Polyurethanes Functionalized with the Backbone of Ionic Liquid Chapter 4: Material Removal and Processing Technologies, Recycling Applications Surface Modification of Coronary Stents for Intravascular Gene Delivery The Theoretical Research on Development Direction of Cement Grinding Aids Preparation and Characterization of Metronidazole Liposome by Supercritical Reverse Phase Evaporation Method Improvement of Porous Medium Permeability by Injecting Overheated Steam Dissolution Behavior of Cast WC Particles in NiCrBSi-WC Coatings by Laser Induction Hybrid Cladding The Removal of In2O3SnO4 Thin Film Using an Arc-Form Tool for the Precision Recycling of Defective Digital-Paper Pavement Performance of Hot In-Place Recycling for Waste Asphalt Mixtures Review of Status and Development of Research of Lead-Free Solder Molten Salt Synthesis of Chlorapatite Whiskers The Performance of Recycled Asphalt Materials II The Performance of Recycled Asphalt Materials I Simultaneous Photocatalytic Removal of Cr(IV) Ions and Methylene Blue Using InVO4/TiO2 Nanocomposites under the Sunlight Irradiation The Removal of Manganese from Underground Water by the Immobilized Manganese-Oxidizing Bacteria Double-Electrode GMAW Welding Process Research Based on the DSC Chapter 5: Nanomaterials and Nanotechnologies The Dynamical Property and Abrasion Performance of Polyester Polyurethane/SiO2 Nanocomposite Preparation and Characterization of NiO Nanowires via Single-Phase Precipitation Synthesis and Aqueous Dispersion of Monodisperse Magnetic Fe3O4 Nanoparticles Structure and Properties Evolution of Nanostructed AgBr/TiO2 Visible Light Photocatalyst in Cyclic Running Analysis on Crack Propagation Mechanism of Nanosingle Crystal Copper about Holes Influence Fabrication of Nano Porous PVDF Beads Investigation of Micromechanical Deformation Mechanisms in Sinter Powder Metals Nanotubes Could Be a Useful Tool for Protein Folding Study Preparation of Aerogel-Modified Expanded Perlite and its Application in Heat Insulation Coating An Aptamer-Nanogold Probe for Trace PDGF Using Resonance Rayleigh Scattering as Detection Technique A Dithiothreitol-Modified Nanogold Resonance Rayleigh Scattering Spectral Probe for Detection of Trace Cr(VI) An Aptamer-Au/MnO2 Nanoprobe for Trace Hg2+ Using Resonance Scattering Method Preparation of Ag-TiO2@MnO2 and Degradation of Toxic Organic Pollutants under Visible Light Irradiation Preparation and Study of Spherical Nickel Hydroxide Coated by Cobalt Oxy-Hydroxide Preparation of Antibacterial WPU Nanometer Titanium Dioxide Composite Resonance Rayleigh Scattering Effect of Te Particles and its Analytical Application Chapter 6: Control and Guided Systems Design of Fuzzy Controllers in AC Servo System Modeling and Control for GMA Based on Hammerstein Model Structure Research of the Workpiece-Stage Control System Based on the ACR9000 in the Composite Coating Equipment of MEVVAII and FAD The CO-Simulation Research of Vehicle Active Suspension Based on Fuzzy Control Simulation Analysis of Proportional Valve Controlled Cylinder Hydraulic System Based on AMESim Study on Intelligent Control of Laser 3D Rapid Prototyping Based on PMAC Chapter 7: Advanced Technologies in Manufacturing, Mechanical Engineering and Industry, Design, Modeling, Analysis and Simulation Simulation of Isolation Performance of Hydraulic Suspension System Evaluation of Deformation Characters in Edgesof Hot Rolled Slab by Lode Parameter Entertainment Commercial Space of Lighting Design An Optimum Design of Piling Machine Column with FEM Research on the Manufacture of Multi-Sipe Radial Tire Molds by EDM Shearing Edging Investigation in High-Speed Blanking Process Applying Precision Progressive Die The Study of the Simulation of Low Rigidity, Variable Cross-Section Shaft Electrolytic Grinding Stiffness Analysis of a Novel Hybrid Manipulator for Mould Repairing Based on ANSYS Analysis of the Fracture for Transmission Output Shaft Based on ANSYS Workbench Study on Naval Vessel Repair Risk Evaluation Model Based on Fuzzy Cognitive Map Analysis of Specific Load Capacity of Radial Hybrid Magnetic Bearing A Comprehensive Fuzzy Method in Seismic Disaster Prediction of Urban Rail Transit Girder Bridges FEM Analysis of Stress on Shaft-Sleeve Interference Fits Analysis on Insulation Resistance Performance in Airport Lighting Circuit High Frequency Impedance Model of Electric Vehicle Traction Battery Electromagnetic Performance Analysis of Claw-Pole Alternator with Changing Permeance Study on the Automobile Exhaust Thermoelectric Generator Test Bench Chapter 8: Dynamics and Mechanics of Physical Prosesses and Behavior in Manufacturing and Materials The Mechanism for the Production of Coherent Structures near Wall of a Turbulent Boundary Layer Excited by Wall Local Impulse Disturbance The Thermo-Mechanical Coupling Analysis of Disc Brakes Transient Temperature Field Nano Mechanical Behaviors of Hindleg Cuticle in Beetle Dorcus titanus (Coleoptera: Lucanidae) Numerical Simulation of Laser Soldering about Electronic Connectors Influence of Preheated Wire on GMAW Process Structure Evolving at Bonding Interface of Dual-Alloys Jointed with Different Method under Coupling Action of Heat and Force Preparation of Several Ionic Liquids with Excellent Friction-Reducing and Antiwear Properties Thermal Stratification Effects on Surge Line Fatigue Life Based on Finite Element Analysis Coupled Heat Transfer Analysis of Interlayer Active Cooling Barrel of Large Caliber Gun Based on CFX Research of Explosive Welding: Numerical Simulation and Analysis A Study of Strain Distribution and Cell Adhesion of MicroHA/CS Composite Scaffold under Mechanical Loading Comparison of Conductivity of Al2O3 Nanofluids between Experiments and Maxwell Model Mechanical Characteristic Study of the Roller Forks' Main Girder Using Different Materials The Thermal Stress Analysis of Langmuir Probe and its Heat Dissipation System Based on the Finite Element Method A Novel Interior Ballistic Prediction of Gun Propellants Based on Experimental Pressure-Apparent Burning Rate Model in Closed Vessel Calculation Analysis of Natural Frequency of Pipe Conveying Fluid Resting on Pasternak Foundation The Multiaxial Creep Strength Analysis Coupling with Damage Evolution for 3D Innercasing of the USC Turbine System Static Coupling Analysis of a Six-Axis Force Sensor Based on Double Layer E-Type Membrane Investigation on Heat Transfer Performance and Mechanism of New Condensation Enhanced Tubes with Machined Surface An Investigation of the Unstable Oscillation Phenomenas of Two-Phase Closed Thermosyphon The Comparative Modal Analysis of Simulation and Experiment on the Electronic Button-Sewing Machine Shell On Determining Elastic Modulus from Instrumented Indentation Analysis on Crack Types and Causes of Junshan Bridge’s Steel Box Girder Orthotropic Plate The Effect of Specimen Orientation and Thickness on the Initiation of Delamination Crack in X80 Pipeline Steel Microstructure-Mechanical Properties Correlations in Composite Grid Structures Research on Constitutive Model for Cartridge Case Materials Experimental Research on Stress-Strain Curve of Carbon Fiber Reinforced Concrete Experimental Study on the Viscoelastic Properties of Asphalt Concrete under Chloride Corrosion Steel Truss Girder Bridge Reinforcement Removing Phase Analysis of Stress Dynamic Monitoring Chapter 9: Materials Optical, Magnetic and Electrical Properties and Technologies, Films and Devices Applications Experimental Study of Nd:YVO4/KTP Solid Laser Pumped by Diode Laser InAsSb Single Crystals and Photoconductors with Cutoff Wavelengths Longer than 8 µm Sintering of Ultrahigh Density and Highly Conductive ZnO-Ga2O3 Ceramic Targets The Study of the Influence of Surface Geometric Error on Optical Properties p-Type Field Effect Transistor and UV-Photoconductive Characteristics of Na Doped ZnMgO Thin Films Sintering of Ti-Doped Tungsten Trioxide Ceramic Targets Synthesis of Highly Luminescent Glutathione-Capped CdTe-Mn/ZnS Quantum Dots Synthesis and Solution Self-Assembly Behavior of Porphyrin Tethered by Fullerene C60 Synthesis of Pyrrolidine Substituted Perylene Imide End Capped with POSS Nanoparticle and a Preliminary Study of its Electronic Properties Microstructure and Magnetic Properties of La-Doped Barium-Ferrite First Principle Study of the Optical Properties of Transition Metal Nitrides XN (X=Ti, Zr, Hf) The Simulation of Soft Magnetic Materials’ Shielding Characteristic in the near Field Communication System The DC-Bias-Superposition Characteristics of Low Sinter Temperature NiCuZn Ferrite Electron Paramagnetic Resonance Study and Magnetic Property of Ni-Doped Titanate Nanorods Research of Micropore Electric Spark Machining Based on Hymu 80 Soft Magnetic Alloy Material Micromagnetic Simulation on the Microwave Magnetic Properties of Glass-Coated Amorphous Alloy Microwires Electromagnetic Noise Suppression Characteristics of FeCoBM-Al2O3 Amorphous Soft Magnetic Films Influence of Microwave Calcination on Microstructure and Magnetic Properties of Sr-Hexagonal Ferrite Influence of Si-Ca Oxide on Microstructure and Magnetic Properties of Calcined Sr1-xLaxFe2n-xCoxOα Study on Preparation and the Noise Suppression Effect of Co2Z Ferrite Films Micro-Structure and Magnetic Properties of Hexagonal M-Type Ferrite Thick Films Prepared by Tape Casting Effect of Growth Atmosphere on the Structural, Optical and Magnetic Properties of Fe-Doped In2O3 Films Room Temperature Magnetoelectric Coupling in Bi5Ti3FeO15 Ceramics Single Wafer Atomic Layer Deposition Reactor Design Low RCS Antenna Based on EBG Structure Effect of Duty Cycle on Microstructure and Corrosion Resistance of MAO Coatings Fabricated on AZ91D Magnesium Alloy in an Optimized Dual Electrolyte Investigation of the Microstructure Evolution of 6016 Aluminum Alloy during Homogenization A Significant Improvement in Mechanical Properties of near Eutectic Nb-Si Alloys Research and Verification on Damping Performance of Magnesium Alloy Structure and Properties of Mo Wear Resistant Coating Prepared on TC4 through Glow Plasma Deposition A New Method of Directional Solidification of Cu-Cr Alloy Study on Corrosion Behavior of Ti-Ni-Nb Shape Memory Alloy and 1Cr18Ni9Ti Stainless Steel Aeroplane Pipe System Low Cycle Fatigue Life Prediction of Ti-6Al-4V Titanium Alloy under Multi-Axial Non Proportional Cyclic Loading The Study of the Microstructure and Mechanical Properties of Friction Stir Spot Welding Joint between AZ31B Magnesium Alloy and Steel Effects of Hot Extrusion and Aging on Microstructure and Mechanical Properties of Mg-Zn-Si-Ca Magnesium Alloy Sol-Gel Derived TiO2 Coating on Hydrothermally Roughened NiTi Alloy Review of Status about the Effect of Ultrasonic Impact on Fatigue Properties of Welded Joints of Magnesium Alloy Transformation Behavior of Austenite Continuous Cooling of Nb-V Micro-Alloyed Low Carbon Steel Effect of Process Parameters on Temperature Field during Laser Sintering of 316L Stainless Steel Powder The Effect of Calcium Treatment on the Corrosion Resistance of Manganese Steels Experimental Study on Heat Transfer Boundary Conditions for Steel Hot Extrusion Process Dynamic Strain Aging in the Fe-Mn-Cu-C TWIP Steels The Formation Mechanism of Equiaxed Crystals in Pure Aluminum Solidification Structure under the Al-Ti-C Master Alloy Segregation Patterns and the Phase-Field 3D-Model for Adiabatic Phase Transition in Al-Cu Alloys Effects of Electrolyte Parameters on Properties of Ceramic Coatings Formed on Aluminum Alloy 7075 by Plasma Electrolytic Oxidation Effects of Surface Oxide Coating on Corrosion Behavior of Ti-1023/LY12 Galvanic Couple Investigation of Microstructure and Properties of an Al-Zn-Mg-Cu Alloy Influence of Welding Sequence on Residual Stress and Distortion in Rectangular Welding of 6061 Aluminum Alloy Orthogonal Experimental Study on the Grinding-Hardened Layer’s Depth and its Uniformity of 45 Steel Mechanism Analysis and Dairy Filtration Experimental Research on Porous 1Cr18Ni9 Stainless Steel Components Quench Sensitivity and Quench-Induced Precipitation in High Strength 7xxx Series Aluminum Alloys Chapter 11: Biomaterials, Natural Materials and Technologies The Determination of the Heat Release Rate on Cotton Smoldering Fire and Polyurethane Fire Dynamic Mechanical Properties of Trimethylborate (TMB) Modified Poplar Wood by Sol-Gel Process Characterization of Chemolithoautotrophic Growth Herbaspirillum sp. Isolated from Volcanic Environment in Miyake-Jima Island, Japan The BP Neural Network Model of Soil Water-Salt Dynamic State Analysis A Study of the Best Extraction Technology of Nasal Mucosa Dosing Bromo Gels Preparing Technology of Porous Hydroxyapatite/Chitosan Bioceramics Chapter 12: Automation, Optimization, Algorithmes in Manufacturing and Industry, Applications Multi-Objective Pareto Optimization of Double-Station Milling Process with the Use of PSO Algorithm Forecasting and Discussing of the Fouling Characteristic of the Plain Tube Prediction of the Slagging Characteristics of Coal Ash Based on Vague Sets Study on the Application of FBG Technology in Rainfall Monitoring


Best Sellers


Product Details
  • ISBN-13: 9783037856444
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 992
  • Weight: 200 gr
  • ISBN-10: 3037856440
  • Publisher Date: 24 May 2013
  • Binding: Paperback
  • Language: English
  • Spine Width: 50 mm
  • Width: 170 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Materials Science and Engineering II
Trans Tech Publications Ltd -
Materials Science and Engineering II
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Materials Science and Engineering II

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!