Material Science and Engineering Technology V
Home > Medicine & Health Science textbooks > Medicine: general issues > Material Science and Engineering Technology V
Material Science and Engineering Technology V

Material Science and Engineering Technology V

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

In this book are presented papers selected by results of 5th International Conference on Material Science and Engineering Technology (October 29-31, 2016, University of Tokyo, Japan). The presented papers describe a wide range of research works and engineering solutions in area of modern materials and technologies of them syntesis and processing. We hope this collection will be interesting and usefull for many engineers and researchers whose activity are related with use of modern materials and technologies in the different branches of industry.

Table of Contents:
Preface, Committee Chapter 1: Composites and Polymers Desorption Behavior of Epoxy/Amine-Coated Polyester Triangular Bar Composites Pre-Exposed to Acid Environment Study on the Mechanism of Pores Deformation in Aluminium Composites under Hot and Cold Upsetting Processes Preliminary Study on the Acoustical, Dielectric and Mechanical Properties of Sugarcane Bagasse Reinforced Unsaturated Polyester Composites Tensile Properties of Unidirectional Kenaf Polypropylene Composite at Various Temperatures and Orientations Tensile Properties of Woven Carbon/Kevlar Reinforced Epoxy Hybrid Composite Effect of Replacing Carbon Black with Surfactant-Modified Natural Feldspar on Mechanical Properties of Natural Rubber Composites Effect of Type of Amine Salt and Surfactant on the Water Sorption and Flexural Properties of Modified Zeolite/Polyester Composites Development, Manufacturing and Characterization of a New Composite Prepared from Cyperus corymbosus Rotth and Poly(Vinyl Chloride) Fire Retardation Mechanism of PVC Composite Filled with White Rice Husk Ash for Ceiling Board Applications Study on Utilization of Palm Frond for Wood Plastic Composite Improving Interfacial Adhesion of Sub-Micro PA6 Composites with De-Sized Carbon Fiber Morphological and Spectral Analysis of Polystyrene-Block-Polyisoprene-Poly(Butyl Acrylate) Triblock Copolymer Modeling the Hardness and Mechanical Properties of Moulded Natural Rubber Pad Effect of Replacing Carbon Black with Organo-Modified Bentonite and Acid-Activated Zeolite on Vulcanization Characteristics of Natural Rubber Tire Tread Epoxidation of Waste Rubber/Zeolite Powder as Potential Filler for Epoxy Resin Metal Organic Frameworks-Templated Hollow Mn2NiO4 Flower for Enhanced Supercapacitor Electrodes Reinforcement of Stereolithography Resin with Silica-Based Fillers RAFT Polymerization of Dual Responsive Hyperbranched-Star Copolymers of Methacrylic Acid and Poly(Ethylene Glycol) Temperature Dependence of Degradation of Colored Oxo-Biodegradable Low-Density Polyethylene Films under Accelerated Thermal Aging Chapter 2: Nanomaterials and Nanotechnology Conductivity Improvement of Silver Nanowire Transparent Electrodes by Surface Plasma Treatment Thermodynamics of Formaldehyde Removal by Adsorption onto Nanosilver Loaded Bamboo-Based Activated Carbon An Experimental Evaluation of Solid Lubricant Based Nanofluids in Small Quantity Cooling and Lubrication during Grinding Effect of Acid/Fiber Ratio on Physical Properties of Cellulose Nanofibers Extracted from Cassava Pulp Effects of Nano Copper Additive on Thermal Conductivity of Magnetorheological Fluid at Different Environment Temperature Photocatalytic Decomposition of Glycerol Solution on TiO2 Nanotube Arrays (TNTA) Doped with C and N to Produce Hydrogen Molecular Oxygen Adsorbed on Gallium Doped Graphene: A First-Principles Study The Physical and Photocatalytic Properties of N-Doped TiO2 Polycrystalline Synthesized by a Single Step Sonochemical Method at Room Temperature Laterally Inhomogeneous Barrier Height Analysis for Thermally Annealed CuNiTi/p-InP Contacts Chapter 3: Biotechnologies, Biomaterials and Technologies in Environmental Engineering Modified Synthetic Fibers a Treatment for Heavy Metal Removal in Aqueous Effect of Degrading Transparent Oxo-Biodegradable Polyethylene Plastic Bags to Water Quality Effects of Various Pretreatment Variables on Hydrolysis of Lignocellulose to Produce Sugar in Bioethanol Production Heat Effects from Far-Infrared Source towards Antioxidant Activity in Aquilariasubintegra Leaves Copper-Treated Philippine Natural Zeolites for Escherichia coli Inactivation Microwave-Irradiation Induced Fast Simultaneous Extraction of Methoxylated and Hydroxylated Phenolic Compounds from Orthosiphon stamineus Leaves Hardness Removal from Water by Modified Starch Enzymatic Activity of Immobilized Carbonic Anhydrase onto Amberlite XAD7 Optimization of Ultrasonic-Assisted Extraction of Polyphenolic and Flavonoids from Labisia pumila Swelling and Crosslinked Formaldehyde Chitosan as Adsorbent for Metal Ion Cu (II) A Comparative Performance of New Materials for Carbon Dioxide Removal in Absorption Process Addition of Mo Zn Fe and Ag into HZSM-5 and NaZSM-5 Catalysts Effects of Alkali and Thermal Treatment on the Ti6Al4V towards Apatite Deposition in Dulbecco’s Phosphate Buffered Saline (DPBS) Solution Mechanical and Thermal Properties of Thermoplastic Film from Tacca leontopetaloides Starch Reinforced with Rice Husk Biochar Preparation and Dye Removal Properties of Hyperbranched Polymeric Ionic Liquid/Poly(Vinylidene Fluoride) Composite Films Properties of Composite Films from Sugarcane Bagasse, Coconut Coir, and Water Hyacinth Fibers/Poly(Vinyl Chloride) Effect of Coating Adhesion on Turmeric Essential Oil Incorporated into Chitosan-Based Edible Coating Effect of Sintering Temperature on Zinc Substituted Calcium Phosphate Ceramics Microscopic Methods for Characterization of Selected Surface Properties of Biodegradable, Nanofibrous Tissue Engineering Scaffolds Chapter 4: Materials and Technologies of Chemical Engineering Development of Brominated Flame Retardants (BFRs) Analysis with Liquid Chromatography-Tandem Mass Spectrometry (LC/MS/MS) in Sewage Sludge Matrix Photon-Induced L-Shell X-Ray Production Cross Sections for Lanthanides at 59.54 keV Hydrogen Bonds-Enhanced Organoclay-Free Oil Based Drilling Fluid System Interfacial Tension Measurement of Light Oil from Thailand to Enhance Oil Recovery for Surfactant Flooding Application Study on the Preparation and Properties of Hybrid Lubricant for Invert Emulsion Drilling Fluids The Study of Photocatalytic Oxidation of Benzyl Alcohol with g-C3N4 under Visible Light: Effect of pH and Salt Molecular Dynamics Simulation Study of Lecithin Inhibiting Hydrate-Dissociation Chapter 5: Design and Development of Fuel Cells and Batteries Experimental Study on the Bundle Lithium-Ion Batteries Fire The Morphology Effect on the Selectivity of SPEEK/ENR Membranes for Direct Methanol Fuel Cell Optimization of the Microstructure of Molten Carbonate Fuel Cell Anode Effects of SPEEK/Cloisite Concentration as Electrospinning Parameter on Proton Exchange Membrane for Direct Methanol Fuel Cell Application Chapter 6: Design and Fabrication of Thin Films and Ceramics Nanostructures and Properties of Vanadium Oxide Thin Film Prepared by Spray Pyrolysis Method Physical Properties of CdSxTe1-x Thin Films Prepared by Close Spaced Sublimation Method Influence of Annealing Temperature on the Properties of SnS Thin Films Prepared by Vacuum Thermal Evaporation Effect of Post-Annealing Treatment on the Structure and Luminescence Properties of AIN:Tb3+ Thin Films Prepared by Radio Frequency Magnetron Sputtering Growth Mechanism of Copper Oxide Fabricaticated by Potentiostatic Electrodeposition Method Design of Reservoir Recognition Technique Component - Open Porosity in Non-Polarizing Electrodes Preparation and Properties of CaO-MgO-Al2O3-SiO2 Glass-Ceramics from Granite Wastes Chapter 7: Properties of Metals and Alloys, Processing Technologies Hot Deformation Behaviour and Microstructural Evaluation of Zr-1Nb Alloy High Strain Rate Compressive Behaviour of Selective Laser Melted Ti-6Al-4V Structure and Properties of CuCr0.6 Alloy after Severe Plastic Deformation Influence of Microalloying (Including Rare-Earth Metals) on the Phase Composition and Properties of Aluminum Alloys Investigation of Impact Behavior of TIG Welded Inconel 718 at Aircraft Engine Operating Temperatures Analysis of Residual Stress on FSW AA 6061 Using Hole-Drilling with ESPI for HFMI Treated Condition Improving Mechanical Properties of Co-Cr-W Alloys by Powder Metallurgy Effect of Zr-Addition to Ti-14Mn Alloy Microstructural Investigation and Characterization of Bulk Brass Melted by Conventional and Microwave Processing Methods Implementing Thermomechanical Properties of 22MnB5 Steel during Hot Single-Point Incremental Forming Some Studies on the Bulging Characteristics of Cold-Upset Steel Preforms Microstructure and Wear Properties of High-Pressure Torsion Processed Iron Packing Efficiency Characterization of SiC Abrasive Machining Particles for Photovoltaic Silicon Wafer Slicing Laser Melting of High Thermal Conductivity Steel (HTCS) Surface Material Removal Model of Lap Grinding for Sapphire Substrate Based on Roughness Parameters Chapter 8: Building Materials Fabrication of Eco-Green Brick by Using of Vetiver Grass as Feldspar Replacement Effect of Delaying Addition of Heat Stimulated Superplasticizer on Fresh Properties of Mortar Investigation of Polyurethane Bonding to Steel in Sandwich Panels Mechanical and Durability Properties of Concrete Using Dredged Marine Sand Study of Sawdust and Expanded Polystyrene as Cavity Filler Material on the Effect of Thermal Conductivity in Perforated Clay Brick Compressive Strength of Mortars Admixed with Wollastonite and Microsilica


Best Sellers


Product Details
  • ISBN-13: 9783035710281
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 440
  • Weight: 880 gr
  • ISBN-10: 3035710287
  • Publisher Date: 20 Apr 2017
  • Binding: Paperback
  • Language: English
  • Spine Width: 22 mm
  • Width: 170 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Material Science and Engineering Technology V
Trans Tech Publications Ltd -
Material Science and Engineering Technology V
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Material Science and Engineering Technology V

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!