Health, Structure, Material and Environment
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Health, Structure, Material and Environment
Health, Structure, Material and Environment

Health, Structure, Material and Environment

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Selected, peer reviewed papers from the 2012 International Conference on Health, Structure, Material and Environment (HSME 2012), December 4-5, 2012, Shenzhen, China. The 199 papers are grouped in to the following chapters: Chapter 1: Structure, Building Materials and Constructions, Architecture and Civil Engineering Application; Chapter 2: Advanced Material Science and Technology; Chapter 3: Advanced Mechanical Engineering, Manufacturing, Industry and Heat Transfer Application; Chapter 4: Environment and Ecology Technology, Sustainable Development of Energy.

Table of Contents:
Preface and Committee Chapter 1: Structure, Building Materials and Constructions, Architecture and Civil Engineering Application Comparison of the Effect of Soil Treatment Methods Used in Highway Widening Projects Research on Education of Urban Planning Science Based on Constructing Scientific Issue Coordination Countermeasures of Overall Urban Planning and Land Utilization Planning Fire Risk Assessment Procedure of Underground Commercial Street Based on Infectious Disease Model Verification and Analysis of Conversion Factor for Pavement Damage Ratio Based on Bayesian Method Simulation Analysis of Scour Impacts on the Dynamic Properties of a Bridge Structure Vibration Table Test and Computer Simulation Analysis of Reinforced Concrete Eccentric Frame - Shear Wall Structures Exploratory Study on the Development of Combination of Hotel and Apartment Push-over Analysis on the Failure Mechanism of Reinforced Concrete Frame Structure Research on the Shear Nails on the Arch Foot of an Oblique Cross Steel Box Arch Bridge LS-SVM Prediction Model Based on Phase Space Reconstruction for Dam Deformation The Effect of New Pouring Precooling Concrete on Lower Layer Concrete in Different Seasons CTOD Fracture Toughness Test for Welded Joints of Steel Study of the Concrete Block Temperature Intelligent Prediction Model during the Construction The Seismic Analysis of Frame-Supported Shear Wall Structures with High Transfer Floor Settlement Prediction of Roadbed Based on Mixture Model with Exponential Curve and ANN The Seismic Performance Simulation Analysis on the Irregular Structure of the Castle Hotel of Dalian Seismic Response Analysis of Soil-Structure Interaction on Base Isolation Structure Application of High-Formwork Technology in Wusong Road Passenger Station Analysis of Design Strategy of Regional Green Architecture Explication from Chinese Traditional Dwellings to Modern Ecological Architecture Design Damage Detection for Offshore Platforms Based on Modal Redundancy Index of Damaged Member Frame Structure the Design of Stair Analysis An Overview of the Research Methods of Concrete Strength at early Age Behaviour of Concrete Filled Steel Square-Tube Stub Column with Steel-Fiber Reinforced High Strength Concrete Evidence Theory for Uncertainty Quantification of Portal Frames with Semi-Rigid Connections A Novel Segmentation Method of Roads and Slopes for Collapse Recognition Experimental Research on Elastic Modulus and Compressive Strength of High-Strength Concrete after Fire Effect of Axial Compression in the Basement Composite Beam Controlled by Flexure Insulation Type Effect on the Direct Shear Behavior of Concrete Sandwich Panel (CSP) with Non-Shear Connectors Vertical Seam Effect on Seismic Performance of Reinforced Concrete Squat Shear Walls with Rectangular Cross-Section A Structural Analysing Model of Sichuan Vernacular Dwelling Strategies and Empirical Research for the Development of New Rural Community Space in West Sichuan Mechanical Analysis of the Anchorage Zone of Pylon for Xinjiang Cable-Stayed Bridge Based on Refined Finite Element Model Investigation Analysis on Guangzhou Huangbu Village Conservation Plan and Situations after its Implementation On the Planning and Construction of Wetland Park Urban Form Developing Strategy Research of Medium and Small Towns in Western Sichuan Plain County Town Planning under the Background of Strategic Planning – Taking Longshi Town in Longchang County of Sichuan Province for Example Feedback and Sensitivity Analysis for Mass Data from Transverse Joints Monitoring System of Super Arch Dam in Sino Mainland Modal Analysis on Xiluodu Arch Dam under Fuzzy Stochastic Damage Constitution Steep Slope Arch Dam Block Reliability Based on Normal Opening of Rock-Concrete Joints The Impact of Stairs on the Aseismic Properties of the Structure Research on the Anchor of Inside-Soil-Opened Umbrella Type & Its Jacking Force Finite Element Analysis on the Crack Width and Deflection of a Local Corroded Reinforced Concrete Beam The Conversion Design of Emergency Facilities in Disaster Mitigation Emergency Congregate Shelters Study on the Dynamic Response and Anti-Collapse Mechanism of High-Pile Wharfs with Different Water Depths Analysis of Lianghu Local-Style Dwellings Detail Structure Application of an Improved Individual Contact SEIR Model in the Influenza Spread Simulations inside Terminal Research on Disaster Prevention Index of Emergency Evacuation System of Urban Community Anti-Shearing Performance Experiment for Interface between Asphalt Concrete Layer and Old Cement Concrete Pavement Experimental Research on Wind Sand Concrete Probability Model of the Compressive Strength of Bricks Based on the Bayesian Inference Measures for the Village Construction and Sustainable Development of Environment: Take the Planning of Beiwu Village Shanhaiguan District as an Example The Urbanization and Artistic Aesthetic of Rural Landscape Chapter 2:Advanced Material Science and Technology Research on Composite Flocculant Improving Substrate Sludge Dehydration Study on the Effect of Coating Solid on Ink Penetration of Coated Paper Research on the Influence of Printing Pressure and Speed on Print Quality of Coated Paper Drying Characteristics of Graininess Agar under Infrared Ray and its Kinetics Model Ferroferric Oxide Magnetic Nanoparticles Carbon Nanotubes Nanocomposite-Based Electrochemical Sensor Applied for Detection of Bisphenol A Isolation of a Novel Chiral Phytoestrogen Breviflavone B from Epimedium Herb by a New Approach of Liquid Chromatography Research on a Neotype of Silica Sphere Filler Formation of Silica Particles by Dc Voltage Preparation Process of Magnesium Hydroxide by Dunite A Preparation Method of Patterned Nanoporous Copper Simulation of Stiffness and Thermal Conductivity of Ordered Metal Microstructure Reinforced Polymer Composite Interposer Anti-Icing Property of the Prepared Super-Hydrophobic Octadecyltrichlorosilane (OTS) Film by Phase Separation Method A Cataluminescence-Based Sensor for Detecting Benzene, Toluene and Xylene Vapors Utilizing the Catalytic Reduction on the Surface of Nanosized Al2O3/Pt Effect of Freezing Temperature on the Microstructure of Negative Temperature Concrete Fabrication of Tunable Liquid Crystal Microlens Using Micro-Drop Technology Micro-Compression Testing of TSV Copper Pillar: An In Situ Method and Mechanical Property Polyelectrolyte-Induced Dispersion of Graphene Sheets in the Hybrid AgCl/PDDA/Graphene Nanocomposites Study of MgXZn1-XO Alloys (0 Surface Modification of Magnesium Alloy by Bioactive Polymer Composite Coating for Biomedical Applications Comparison of Characteristics of Rapid Thermal and Microwave Annealed Amorphous Silicon Thin Films Prepared by Electron Beam Evaporation and Low Pressure Chemical Vapor Deposition Research on the Strengthen of Silicone Rubber Characterization of Various Size ZnO Nanorods Prepared by RF Sputtering and Hydrothermal Method Highly Birefringent Extruded Elliptical-Hole Photonic Crystal Fiber Pyrolysis Products of Lignin at Different Temperature Detected by Py-GC-MS Study on Crack Tip Field of Shape Memory Alloy Board under Torsion Load Studies the Factors of the Simultaneous Removal of Nitrogen and Carbon on Membrane Aeration Bioreactor Preparation and Character Measurements of AlN Films for RF Magnetron Sputtering Electrochemical Pre-Oxidation of Drinking Water by On-Site Electro-Generation of Hydrogen Peroxide Fabrication and Field Emission Properties of In2O3 Nanorods Environmentally Synthesis of Metallic Oxide Short-Nanorod with Biological Compatibility by Organic Solvent Assisted Annealing Process Research on Homogenization of Composite Materials Characterization of Rapid Thermal and Micro-Wave Annealed Germanium Thin Films Grown by E-Beam Evaporation on Glass Substrates Influence of Doping Mn or Ce on the Electrical Properties of PSZT DEM Simulation of Micro-Macro Mechanical Behaviour of Granular Materials Composite Material of MnO2 and CNT for Supercapacitor The Study of Recombinant Bamboo Material for Modern Furniture Processing Chapter 3: Advanced Mechanical Engineering,Manufacturing, Industry and Heat Transfer Application Several Key Issues in the Electric Refitting of Engineering Machinery Developing a DSP-Based Control System of Servo Punch Press Using Model-Based Method Numerical Study of Heat Transfer of RP-3 at Supercritical Pressure Experimental Investigation to Boiling Heat Transfer on a Heated Surface with Multiple Impinging Jets Study on Total Pressure Losses Characteristics of Rotating Cavity with Radial Inflow of Different Drum Hole Shape Effect of Pin-Fin Material on Heat Transfer and Flow Resistance Characteristic of Rectangular Channel Control Architecture for Garbage Sorting Robot Analysis Technique for the Spectral Characteristic of Acoustic Emission Signals Spectral Analysis of Acoustic Emission Signals Using NI Systems Design and Implementation of Lighting Management System Based on Wireless City Design of the Rehabilitative Apparatus for Ankle Joint Based on Parallel Mechanism and EMC2 A Method for Measuring Pressure under Rotating Conditions Research of Powder Blasting Based Ona New Type PDMS Mask Pressure Characteristics of the Air Flow Field of Cyclone Simulation for Dynamic Characteristics of Hydraulic Breaker Study on the Modeling Method of Leaf Spring Based on Assembly Pre-Stress Modal Analysis of the High Temperature and Pneumatic Duct System of the Aircraft The Design of Micro Electrostatic Structure with Low Driving Voltage Research on Key Problems of Simulation Training for Practical Software Entry Based on IP Filter Hook Fault Diagnosis Expert System for Electric Power System of the Large-Scale UAVs Based on Virtual Instrument Study on the Effect of Tool Geometrical Parameters on Cutting Forces Based on Finite Element Method Numerical Simulation Study of Impinging Jet Impact Fin Surface on Heat Transfer Characteristics Foster Strength of Graphic Communications Industry and Make Print the Value Added Media Design and Simulation of the Single Expansion Ramp Nozzle(SERN) Study on a Rope Deployment Cascade Mechanism CO-OFDM Technology Long Distance Transmission System Ultrasonic Imaging System Based on Virtual Instrument Stimulate and Eliminate Electronic Product Design Defects By Reliability Enhancement Testing Application of Shortest-Path Algorithm in Embedded GIS System The Design and Implementation of Tri-Axial Magnetometer Modeling of Single Camera Location under the Natural Light in the Vedio-Oculography System Data Fitting Analysis for Fatigue Crack Growth under Multiple Overload Variable Amplitude Loading Lateral Static Water Pressure Measurement and Analysis for Temporary Sandbags Barrier Facility Numerical Simulation on Blasting Fume Diffusion in Blind Roadway with FLUENT A Fast Geological Logging Technique of Underground Coal Mines Based on Photogrammetry Experimental Research on the Mechanic Behavior of Fiber Shotcrete Stochastic Finite Element Theory Based on Visco-Plasto Constitution Stochastic Mechanical Characteristics of Zhoushan Marine Soil Based on GDS Test System Relationship between Transport Power and Reliability of District Heating System Study on Seismic Dynamic Response of Offshore Wind Turbine Tower with Monopile Foundation Based on M Method Stress and Buckling Analysis of a Certain Type of All-Composite Landing Gear Study on 600V Super Junction Power MOSFET Optimization and Electric Characteristics Using Deep Trench Filling Experimental Design about Degradation Mechanism of CAM and Preliminary Experiment Results Design of a Mechanical Exoskeleton System for Improving Hand-Gripping Force Systematic Design of a Highly Efficient Uniform Grating Coupler with Gradually Etched Depths for SOI Waveguides Research on Thermal Optimal Operation Scheduling of Multi-Heat Source Co-Heating System Adaptive Resource Allocation for the Multi-User Multi-Carrier Networks Chapter 4: Environment and Ecology Technology, Sustainable Development of Energy Solid Distribution in Clarifier Blanket: Numerical Modeling and Experimental Measurement Leaf Nutrient Resorption of Seagrass Zostera japonica Aschers. et Graebn. in Beihai, Guangxi, China Examination and Evaluation of WRF in Floods Season Precipitation Forecast of Jintan Isolation, Characterization of a Candida Strain Capable Degrading of Dyes 4,5-Diamino-1-Pyrazole Sulfate Research and Application of Tapping Potential Remaining Oil of Low Permeability Reservoir in Hei47 Block, Jilin Oilfield Printing Industry and the Environment Material Form and Nature of Breadth Space Resources Exploring Uncertainties in Flood Frequency Analysis Using Bayesian MCMC Method Shangri-La County Ecological Risk Evaluation Based on RS and GIS Key Technology Research and Application of the Special Planning for Water Resources in Urban Ecological Planning Research on the SGD in the Yang River Downstream Region Based on Visual MODFLOW Cutoff Wall Construction Effect of Groundwater Dynamic in the Lower Area of Dagu River Based on the Literature Statistical Ecological Compensation Academic Research Characteristics and Development Analysis Comprehensive Benefit Evaluation of Rural Household Biogas Based on Fuzzy Comprehensive Evaluation Method Enhanced Adsorption for P-Chlorophenol by Ammonia Modified Activated Carbon Tin Ore Tailing Reservoir Dominant Plants Heavy Metal Accumulation Characteristics of Yunnan An Ecological Suitability Assessment Method Based on Support Vector Machine Health Evaluation of Larix Kaempferi Plantation Ecosystem Based on BP Neural Network Model Construction of the Course of Environmental Economics and Management Developing of Air Pollution Control Engineering Description of Municipal Solid Waste Treatment Introduction to Environmental Protection Environmental Quality Management by ISO14001 Improvement of the Course of Cleaner Production Description of the Course Water Pollution Control Construction of the Course of Industrial Wastewater Treatment Comparative Research for Different Treatment Technologies of Daily Drinking Water Effects of Temperature Gradient on Algae Inhibition Zone in Source Water Reservoirs Using In Situ Water-Lifting Aeration Technology The Application of Seismic Data Processing Technology in Kongdian Area Heavy Metal Distribution Inflected by Baishui Reclamation in Luoyuan Bay Sensitivity Analysis and Parameter Optimization of a Hydrodynamic Model for the Aeration Chamber in a Water-Lifting Aerator Study on the Adsorption Effect of Active Carbon of Various Compozitions in Polytetrahydrofuran Waste Water Ultrasound-Assisted Emulsification Microextraction-Solvent Floating Solidification-Pre-Column Derivatization for the Determination of Estrogens in Water Samples Construction of Emission Reduction Potential Model on Refinery and Chemical Enterprises First Record of the Harmful Raphidophyte Chattonella marina Bloom in Rushan Coast, China in 2008 after the Occurrence of the Green Tide An QSAR Model for Predicting PBDEs Toxicity Established Based on Ridge Regression Joint Toxicity of Multiple Heavy Metal Compounds to Photobacterium phosphoreum Application of Shiono and Knight Method to Compound Open Channel Flow with One-Line Emergent Vegetation An IFP Model for Carbon Footprint in Low-Carbon Urban Agglomeration under Uncertainty Allocation Model of Total Energy Consumption and Pollutant Emission Control Based on Low-Carbon Economy and its Significance Ballast Waters Treatment Using UV/(H2O2+O3) Advanced Oxidation Process with Heterosigma akashiwo, Pyramimimonas sp., and Escherichia coli as Indicator Microorganism Influence of Superficial Gas Velocity on the Dynamic Characteristics Parameters of CFB New Nitrogen and Phosphorus Removal Process Development Based on Simulation Optimizing Control Strategy of Interactive Reactor with Simulation Theoretical Basis and Research Frame Designing of Strategic Environmental Assessment for Municipal Waste Management System in China Effects of Water Depth on Algae Control in Stratified Reservoirs Using In Situ Water-Lifting Aeration Technology Principal Component Regression Applied in Differential Optical Absorption Spectroscopy Measurement Study on the Thermal Stability of Polyphenylene Sulfide Filter Media by Non-Isothermal Thermogravimetry A Marine Ecosystem Model Considering the Processes of Eutrophication and Heavy Metal Transformation Two Dimensional Hydrodynamic and Pollutant Transport Modeling of Jiangyin-Xuliujing Reach of Yangtze Estuary Chelating Agent EDDS in Removal of Copper (II) with Three Adsorption Materials The Research of Reduction Characteristics of Fe(III) Dissimilated by Different Activated Sludge Reduction of Benzo[A]Pyrene in Coal Tar Pitch with Cross Linking Monomers Development of the Thermoluminescence Dosimetry Measure and Control System Nutrient Removal from Polluted River Water by Combining Vertical and Horizontal Subsurface Flow Constructed Wetlands BCM Municipal Wastewater Advanced Treatment New Technology Performance of Hybrid Anaerobic Baffled Reactor in Treating Wastewater with High Strength of Suspended Solids Study on Automatic Safety Monitoring and Management System of Tailings Reservoir Construct the Monitoring Analysis System of the Coastal Power Station Discharge Water Based on GIS Simulation of the Soft Magnetic Yoke for Micro Electromagnetic Vibration Energy Harvester Based on MEMS Technology Seasonal Transport Characteristics of Suspended Particulate Organic Carbon in the Middle and Lower Yangtze River and the Relationship with Three Georges Reservoir Effect of Quartz Sand Coated with Water-Treatment Residuals as Arsenic Adsorbent


Best Sellers


Product Details
  • ISBN-13: 9783037856000
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1120
  • Weight: 200 gr
  • ISBN-10: 3037856009
  • Publisher Date: 17 Apr 2013
  • Binding: Paperback
  • Language: English
  • Spine Width: 56 mm
  • Width: 170 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Health, Structure, Material and Environment
Trans Tech Publications Ltd -
Health, Structure, Material and Environment
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Health, Structure, Material and Environment

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!