Handbook of Measuring System Design, 3 Volume Set
Home > Science, Technology & Agriculture > Electronics and communications engineering > Handbook of Measuring System Design, 3 Volume Set
Handbook of Measuring System Design, 3 Volume Set

Handbook of Measuring System Design, 3 Volume Set

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

The most comprehensive and up-to-date reference work coveringthe scientific fundamentals and practical considerations fordesigning, developing and implementing measuring systems in a broadrange of engineering and technological fields. Measuring systems lie at the heart of all science, engineeringand technology, and are used to quantify physical phenomena such astemperature, pressure, voltage and current. Rapid advances incomputing and electronics have enabled the development of highlysophisticated measuring systems that can be utilised across manyindustrial fields. The Handbook of Measuring System Design provides anauthoritative and comprehensive reference that addresses a widerange of measurement-specific design and application problems inthe fields of engineering and technology. Building on athorough treatment of foundational topics the Handbook presents amodern, 'systems thinking' approach and covers manyareas that have received little attention elsewhere (systems,safety, design, legal and artificial intelligence).

Table of Contents:
VOLUME 1 Contributors. Preface. Abbreviations and Acronyms. Introduction. PART 1. FOUNDATIONS OF MEASURING. SECTION 1. THE PROCESS OF MEASURING. 1. Sophistication of Measurement and its Body of Knowledge (Peter H. Sydenham). 2. Organization of Instrument Science (Joseph McGhee). 3. Measures and Metrics; Their Application (Peter H. Sydenham) 4. Economic Consideration of Measurement (Peter H. Sydenham). 5. Humans in the Real World (Joseph McGhee). 6. Substructure of Human-Machine Systems (Joseph McGhee). SECTION 2. MEASURING THEORY AND PHILOSOPHY. 7. Introduction to Measurement Theory and Philosophy (Ludwik Finkelstein). 8. Formal Theory of Measurement (Ludwik Finkelstein). 9. Nature and Properties of Measurement (Ludwik Finkelstein). 10. Extensions of the Representational Theory of Measurement (Ludwik Finkelstein). 11. Measurement Theory in Physical, Social, and Psychological Science (Ludwik Finkelstein). 12. Fuzzy Approaches for Measurement (Eric Benoit, Laurent Foulloy and Gilles Mauris). 13. Signals, Information and Knowledge, and Meaning (Qing Ping Yang). 14. Hierarchical Aspects of Measurement Systems (Joseph McGhee). 15. Typical Measurement Systems Architecture (Joseph McGhee). SECTION 3. ENVIRONMENTAL FACTORS. 16. Reduction of Influence Factors (Paul P.L. Regtien) 17. EMC and EMI (Kim R. Fowler). SECTION 4. FEEDBACK IN MEASURING SYSTEMS. 18. Nature and Scope of Closed-loop Systems (Peter H. Sydenham). 19. Dynamic Behavior of Closed-loop Systems (Peter H. Sydenham). 20. Closed-loop Sampled Data Systems (Peter H. Sydenham). 21. Nonlinear Closed-loop Systems (Peter H. Sydenham). SECTION 5. MESSAGING THEORY. 22. Characteristics and Theory of Knowledge (Luca P. Mari). 23. Principles of Semiotics as Related to Measurement (Luca P. Mari). 24. Principles of Epistemology as Related to Measurement (Timothy Lindsay John Ferris). SECTION 6. SIGNAL THEORY. 25. Introduction to Signals in Physical Systems (Eugen Georg Woschni). 26. Signal Classification (Eugen Georg Woschni). 27. Signals in the Frequency Domain (Eugen Georg Woschni)). 28. Signals in the Time Domain (Eugen Georg Woschni). 29. Relationship Between Signals in the Time and Frequency Domain (Eugen Georg Woschni). 30. Statistical Signal Representations (Eugen Georg Woschni). 31. Discrete Signal Theory (Eugen Georg Woschni). 32. Geometrical Signal Representation (Eugen Georg Woschni). 33. Coding Theory and its Application to Measurement (Eugen Georg Woschni). 34. Modulation Theory (Eugen Georg Woschni). SECTION 7. SYSTEMS THEORY. 35. Systems in the Time-Domain (Eugen Georg Woschni). 36. Systems in the Frequency Domain (Eugen Georg Woschni) 37. Relationship Between Systems in the Time and Frequency Domain (Eugen Georg Woschni). 38. Stability Issues (Eugen Georg Woschni). SECTION 8. SOURCES OF INFORMATION ON MEASUREMENT. 39. Characteristics of Data, Information, Knowledge, and Wisdom (Timothy Lindsay John Ferris). 40. Sources of Information (Peter H. Sydenham). 41. Terminology and Classification of Measurement Systems (Peter H. Sydenham). 42. Information Databases of Relevance to Measurement (Peter H. Sydenham). PART 2. UNITS, STANDARDS AND CALIBRATION. SECTION 1. STANDARDS SUPPORTING MEASUREMENT. 43. Units (Brian W. Petley). 44. Types of Paper Standards and their Purpose (Halit Eren). SECTION 2. CALIBRATION. 45. Calibration Process (Halit Eren). 46. Calibration Interval (Peter H. Sydenham). 47. Internet Calibration (Richard A. Dudley). PART 3. ERROR AND UNCERTAINTY. SECTION 1. ERROR AND UNCERTAINTY. 48. Common Sources of Errors in Measurement Systems (Dietrich Hofmann). 49. General Characterization of Systematic and Stochastic Errors (Martin Halaj). 50. Errors in Signal Systems (Eugen Georg Woschni). 51. Errors in Digital Signal Systems (Luca P. Mari). 52. Error Models, Error Budgets and their Calculation (Rudolf Palencár). 53. Calculation and Treatment of Errors (Joseph McGhee). 54. Explanation of Key Error and Uncertainty Concepts and Terms (Luca P. Mari). 55. Uncertainty Determination (Joseph McGhee). PART 4. MEASURING SYSTEM BEHAVIOR. SECTION 1. MEASURING SYSTEM SPECIFICATION. 56. Transfer Characteristics of Instrument Stages (Peter H. Sydenham). 57. Static Considerations of General Instrumentation (Peter H. Sydenham). 58. Description of Accuracy: Linearity, and Drift (Peter H. Sydenham). 59. Introduction to the Dynamic Regime of Measurement Systems (Peter H. Sydenham). 60. Zero-order System Dynamics (Peter H. Sydenham). 61. First-order System Dynamics (Peter H. Sydenham). 62. Second-order System Dynamics (Peter H. Sydenham). VOLUME 2 PART 5. MEASURING SYSTEM DESIGN. SECTION 1. ENGINEERING A MEASURING SYSTEM. 63. Outline of Systems Thinking (Peter H. Sydenham). 64. Executing A Measuring System Design (Peter H. Sydenham). 65. Life Cycle Concept (Floyd Guyton Patterson Jr.). 66. Phases of System Life Cycle (Kim R. Fowler). 67. Principle of Concept of Operations (ConOps) (Jack Ring). 68. Setting the System Boundaries (Joseph McGhee). 69. Requirements Allocation (Andrew Kusiak and Fang Qin). SECTION 2. DESIGN METHODOLOGIES. 70. Measuring System Design Methodologies (Ludwik Finkelstein). 71. Modeling Methodology (Peter H. Sydenham). 72. Mathematical Methods of Optimization (Halit Eren). SECTION 3. ELECTRONIC AND ELECTRICAL REGIME. 73. Overview of Electrical and Electronic Technique (Peter H. Sydenham). 74. Basic Electronic Components (Peter H. Sydenham). 75. Electronic System Building Blocks (Peter H. Sydenham). 76. Electronic Systems Design (Peter H. Sydenham). 77. Limits of Detection in Electronic Systems (Peter H. Sydenham). 78. Embedded Systems (Timothy Wilmshurst). 79. Testing Electronic Systems (Patrick D.T. O’Connor). SECTION 4. FINE MECHANICAL REGIME. 80. Principles of Fine Mechanics – Kinematic and Elastic Designs (Peter H. Sydenham). 81. Principles of Fine Mechanics – Systems Considerations (Peter H. Sydenham). 82. Kinematical Regime – Members and Linkages (Peter H. Sydenham). 83. Kinematical Regime - Fasteners, Bearings (Peter H. Sydenham 84. 83. Kinematical Regime – Rotary Motion (Peter H. Sydenham 85. Elastic Regime of Design – Design Principles (Peter H. Sydenham). 86. Elastic Regime of Design – Spring Systems (Peter H. Sydenham). 87. Elastic Regime of Design – Plates and Bimorphs (Peter H. Sydenham). 88. Error Sources in Fine Mechanics (Peter H. Sydenham). SECTION 5. VISIBLE RADIATION REGIME. 89. Optical Materials (Pak L. Chu). 90. Optical Elements (Pak L. Chu). 91. Light Sources and Detectors (Miroslaw Jonasz). 92. Optical Measuring Instruments (Peter H. Sydenham). 93. Testing Optical and Other Radiation Systems (Alan J. Cormier). SECTION 6. HUMAN FACTORS ENGINEERIN. 94. Human Factors Engineering (Nicholas I. Beagley). 95. Human-Machine Interface (Nicholas I. Beagley). 96. The Domains of Human Factors Integration (Nicholas I. Beagley). 97. Design Methodology (Nicholas I. Beagley). SECTION 7. QUALITY IN MEASURING SYSTEMS. 98. Reliability and Maintainability (Patrick D.T. O’Connor). 99. Safety Organization (Peter H. Sydenham). 100. Safety Analysis Methods (Peter H. Sydenham). 101. Assessing and Demonstrating Safety (Peter H. Sydenham). 102. Introduction to the Legal Process (Christopher Sweet). 103. Legal Liability Issues for Designers – A Case Study (Christopher Sweet). PART 6. MODELING MEASURING SYSTEMS. SECTION 1. MODELING MEASURING SYSTEMS. 104. Models of the Measurement Process (Luca P. Mari). 105. Modeling with LabVIEW™ (Wieslaw Ttaczala). 106. Virtual Instrumentation in Physics (Wieslaw Ttaczala). PART 7. ELEMENTS: A – SENSORS. SECTION 1. SENSOR FUNDAMENTALS. 107. Principles of Sensor Science (Joseph McGhee). 108. Transducer Fundamentals (Paul P.L. Regtien). 109. Structure and Energy in Sensor Systems (Joseph McGhee). 110. Signal/Energy Matrix Modeling (Joseph McGhee). 111. Classification of Sensors (Joseph McGhee). 112. Systematic Description of Sensors (Paul P.L. Regtien). 113. Force-feedback Sensors (Barry E. Jones). SECTION 2. THE SENSING INTERFACE. 114. Models of the Sensor Interface (Qing Ping Yang). 115. Designing the Sensor Interface (Qing Ping Yang). 116. Selection of Sensors (Paul P.L. Regtien). 117. Materials in Measuring Systems (Peter H. Sydenham). 118. Ultrasonic Sensors (Peter J. Lesniewski). 119. Ultrasonic Instrumentation Principles (Lawrence C. Lynnworth). 120. Ultrasonic Instrumentation Design (Lawrence C. Lynnworth). PART 8. ELEMENTS: B – SIGNAL CONDITIONING. SECTION 1. ANALOG SIGNAL CONDITIONING. 121. Signals in the Presence of Noise (Richard Burdett). 122. Operational Amplifiers (Joseph McGhee). 123. Instrumentation Amplifiers (Joseph McGhee). 124. Specialized Amplifiers for Measurement Systems (Joseph McGhee). 125. Outline of Purpose of Analog Data Filters (Joseph McGhee). SECTION 2. ELECTRICAL BRIDGES. 126. Electrical Bridge Circuits – Basic Information (Zygmunt L. Warsza). 127. Unbalanced DC Bridges (Zygmunt L. Warsza). SECTION 3. AI SIGNAL PROCESSING TECHNIQUES> 128. Name and Scope of AI Techniques (Ajith Abraham). 129. Artificial Neural Networks (Ajith Abraham). 130. Rule-based Expert Systems (Ajith Abraham). 131. Evolution Computation (Ajith Abraham). VOLUME 3 PART 9. ELEMENTS: C – DATA ACQUISITION AND PROCESSING SYSTEMS. SECTION 1. DAS COMPONENTS. 132. Data Acquisition Systems (DAS) in General (Gerd Wöstenkühler). 133. Amplifiers and Filters for DAS (Gerd Wöstenkühler). 134. Analog Multiplexers (Gerd Wöstenkühler). 135. Sample-hold Circuits (Gerd Wöstenkühler). 136. Quantizing Theory Relevant to DAS (Gerd Wöstenkühler). 137. Coding for Data Converters (Gerd Wöstenkühler). 138. Sampling Theory Relevant to DAS (Gerd Wöstenkühler). 139. Analog-to-Digital (A/D) Converters (Gerd Wöstenkühler). 140. Integrating Type (A/D) Converters (Gerd Wöstenkühler). 141. Digital-to-Analog (D/A) Converters (Gerd Wöstenkühler). SECTION 2. DIGITAL SIGNAL PROCESSING (DSP). 142. Z-transforms (Armar Bousbaine). 143. DFT and FFTs (Gerd Wöstenkühler). 144. DSP Chip Sets (Iain Paterson-Stephens). 145. DSP Tools (Iain Paterson-Stephens). 146. Principles of DSP Hardware Design (Iain Paterson-Stephens). 147. Ideal Digital Filters Approximation (Joseph McGhee). 148. General Performance of the Digital Filter (Joseph McGhee). 149. Low-, High-, and Band-pass Digital Filters (Joseph McGhee). 150. Finite Impulse Response (IIR) Digital Filters (Joseph McGhee). 151. Finite Impulse Response (FIR) Digital Filters (Joseph McGhee). SECTION 3. COMPUTERS IN MEASURING SYSTEMS. 152. Fundamentals of the Stored Program Digital Computer (Joseph McGhee). 153. Single Address Instruction Microcomputer (Joseph McGhee). 154. Internal Operation of the Microprocessor (Joseph McGhee). 155. External Operation of the Microprocessor (Joseph McGhee). 156. Memory Management in the Microprocessor (Joseph McGhee). 157. Data Acceleration in Computers (Joseph McGhee). 158. Microcontroller Systems (Joseph McGhee). 159. Designing and Building Software for Measuring Systems (Joseph E. Kasser). SECTION 4. INTELLIGENT MEASURING SYSTEMS. 160. Smart Sensor System Features (Peter H. Sydenham). 161. Knowledge-based Systems (Dietrich Hofmann). PART 10. ELEMENTS: D – MEMS. SECTION 1. MICRO ELECTRO MECHANICAL SYSTEMS (MEMS). 162. Principles of MEMS (Janusz Bryzek). 163. Uses and Benefits of MEMS (Janusz Bryzek). 164. Principles of MEMS Actuators (Janusz Bryzek). PART 11. ELEMENTS: E – COMMUNICATION IN MEASURING SYSTEMS. SECTION 1. DISTRIBUTED AND NETWORKED MEASURING SYSTEMS. 165. Introduction to Networked Instrumentation (Joseph McGhee). 166. Instrument Interconnection (Joseph McGhee). 167. Asynchronous and Synchronous Interface Protocols (Joseph McGhee). 168. RS 232 and EIA/TIA 232 Serial Interface (Joseph McGhee). 169. Voltage and Current Loop Transmission (Joseph McGhee). 170. IEEE-488 Instrumentation Bus (Joseph McGhee). 171. Local Area (LANs) and Wide Area Networks (WANs) (Joseph McGhee). 172. Fieldbus Systems (Halit Eren). 173. Scheduling Systems (Emil Michta). PART 12. ELEMENTS: F – SIGNALS AND NOISE. SECTION 1. NOISE AND INTERFERENCE. 174. Typical Signals Arising in Measurement (Eugen Georg Woschni). 175. Comparison of Analog and Digital Signal Handling (Joseph McGhee). 176. Signals and Signal-t0-noise Ratio (Richard Burdett). 177. Grounding and Shielding (Kim R. Fowler). 178. Noise Matching and Preamplifier Selection (Richard Burdett). 179. Input Connections; Grounding and Shielding (Richard Burdett). SECTION 2. SIGNAL RECOVERY IN THE PRESENCE OF NOISE. 180. Bandwidth Reduction of Baseband DC Signals (Richard Burdett). 181. Amplitude Modulated Signals: The Lock-in Amplifier (Richard Burdett). 182. Boxcar and Signal Averages (Richard Burdett). 183. Correlators in Signal Extraction (Richard Burdett). 184. Photon Counting (Richard Burdett). 185. Pulse Height Discrimination, Ratemeters and Pileup (Richard Burdett). 186. The Family of Signal Recovery Methods (Richard Burdett). PART 13. COMMON MEASURANDS. SECTION 1. FLOW MEASUREMENT. 187. Flowmeter Selection and Application (Michael Reader-Harris). 188. Differential Pressure (DP) Flowmeters (Michael Reader-Harris). 189. Basic Principles of Flow Measurement (Richard Thorn). 190. Calibration and Standards in Flow Measurement (Richard Paton). SECTION 2. DISPLACEMENT AND ANGLE MEASUREMENT. 191. Displacement and Angle Sensors Performance and Selection (Halit Eren). 192. Strain Sensors (Peter H. Sydenham). 193. Specialty Displacement and Angle Sensors (Halit Eren). 194. Large-scale Metrology (Stephen Kyle). SECTION 3. TEMPERATURE MEASUREMENT. 195. Characteristics of Temperature Measurement (Joseph McGhee). 196. Thermocouple Temperature Sensors (Jacek Kucharski). 197. Metalic Resistance Temperature Detectors (RTDs) (Dietrich Hofmann). 198. Calibration and Standards in Temperature Measurement (D.R. White). SECTION 4. TIME AND FREQUENCY. 199. Characteristics of Time and Frequency Measurement (Michael A. Lombardi). 200. Calibrations and Standards in Time Measurement (Michael A. Lombardi). SECTION 5. ELECTRICAL QUANTITIES. 201. Voltage Measurement (Halit Eren). 202. Current Measurement (Halit Eren). 203. Resistance Measurement (Halit Eren). 204. Capacitance and Inductance Measurement (Consolatina Liguori). SECTION 6. VELOCITY AND ACCELERATION. 205. Theory of Vibration Measurement (Peter H. Sydenham). 206. Practice of Vibration Measurement (Peter H. Sydenham). 207. Acceleration Measurement (Peter H. Sydenham). 208. Amplitude and Velocity Measurement (Peter H. Sydenham). SECTION 7. CHEMICAL PROPERTIES. 209. Characteristics of Chemical Measurements (Peter H. Sydenham). 210. Optical Transducers for Chemical Measurements (Ashutosh Sharma). 211. Mass Spectrometry (Peter H. Sydenham). 212. Chromatography (Brett Paull). 213. Electrochemical Measurements (David Davey). PART 14. TEST AND EVALUATION. SECTION 1. MEASUREMENT TESTING SYSTEMS. 214. Accelerated Testing (Patrick D.T. O’Connor). 215. Automatic Test Systems (Patrick D.T. O’Connor). 216. Test Facilities (Patrick D.T. O’Connor). 217. Instrument Evaluation (Steve Cork). Subject Index.


Best Sellers


Product Details
  • ISBN-13: 9780470021439
  • Publisher: John Wiley & Sons Inc
  • Publisher Imprint: John Wiley & Sons Inc
  • Height: 343 mm
  • No of Pages: 1648
  • Returnable: N
  • Weight: 6976 gr
  • ISBN-10: 0470021438
  • Publisher Date: 21 Jan 2005
  • Binding: Hardback
  • Language: English
  • Returnable: N
  • Spine Width: 211 mm
  • Width: 250 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Handbook of Measuring System Design, 3 Volume Set
John Wiley & Sons Inc -
Handbook of Measuring System Design, 3 Volume Set
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Handbook of Measuring System Design, 3 Volume Set

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!