Advances in Experimental Mechanics VIII
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advances in Experimental Mechanics VIII
Advances in Experimental Mechanics VIII

Advances in Experimental Mechanics VIII

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

This volume of Applied Mechanics and Materials contains the papers presented at the joint 2011 Annual British Society for Strain Measurement Conference and the 2011 Fall Society for Experimental Mechanics Conference. This is the first time that the two societies have held their conferences together. However, it is the sixth time that the papers from an Annual British Society for Strain Measurement Conference have been published as a collection in a volume of Applied Mechanics and Materials. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 82 papers in this volume reflect the diverse nature of Experimental Mechanics, with the emphasis placed on Integrating Simulation and Experimentation for Validation. The papers come from both academia and industry, with more than half of the contributions originating from outside the UK; thus indicating the international flavour of this event.

Table of Contents:
Preface, Committees and Sponsors Keynote Lecture 1 What Optical Metrology Can Do for Experimental Mechanics ? Keynote Lecture 2 Application of 3D Traction Force Microscopy to Mechanotransduction of Cell Clusters BSSM Measurements Lecture Measurement of Thermomechanical Coupling and its Application in Stress and Damage Analysis Session 1: Validation of Dynamic Events The Development of a Reference Material for Calibration of Full-Field Optical Measurement Systems for Dynamic Deformation Measurements Image Analysis for Full-Field Displacement/Strain Data: Method and Applications Application of High Speed Image Correlation for Measurement of Mode Shapes of a Car Bonnet Use of Integrated Simulation and Experimentation to Quantify Impact Damage Validation of Impact Simulations of a Car Bonnet by Full-Field Optical Measurements Comparison of Numerical and Experimental Strain Measurements of a Composite Panel Using Image Decomposition Session 2a: High Speed Imaging for Dynamic Testing High/Ultra-High Speed Imaging as a Diagnostic Tool Approaches to Synchronise Conventional Measurements with Optical Techniques at High Strain Rates Performances and Limitations of Three Ultra High-Speed Imaging Cameras for Full-Field Deformation Measurements Damage Observation and Analysis of a Rock Brazilian Disc Using High-Speed DIC Method Session 2b: Foam Materials and Structures Assessment of the Deformation of Low Density Polymeric Auxetic Foams by X-Ray Tomography and Digital Volume Correlation Strength Hypothesis Applied to Hard Foams Characterisation and Modelling of a Melt-Extruded LDPE Closed Cell Foam Verification of a Finite Element Simulation of the Progressive Collapse of Micro Lattice Structures Session 3a: Welding Stresses Model Updating for a Welded Structure Made from Thin Steel Sheets Using Digital Image Correlation Techniques and Finite Element Models for Strain-Field Analysis of a Welded Aluminium Structure Validation of Welding Simulations Using Thermal Strains Measured with DIC Local Elasto-Plastic Identification of the Behaviour of Friction Stir Welds with the Virtual Fields Method Session 3b: Fracture Mechanics Fatigue Crack Initiation and Propagation in SuperCMV Hollow Shafts with Transverse Holes Accurate Measurement of Opening Displacement of Notch with Moiré Interferometry by Changing Applied Load Understanding Crack Tip Plasticity – a Multi-Experimental Approach Experimental and Theoretical Study of Fracture Paths in Brittle Cracked Materials Subjected to Pure Mode II Loading Session 4a: Advances in Digital Image Correlation Assessment of Measuring Errors in Strain Fields Obtained via DIC on Planar Sheet Metal Specimens with a Non-Perpendicular Camera Alignment Digital Image Correlation Techniques for Analysing the Deformation Behaviour of Compacted Graphite Cast Irons on a Microstructural Level Error Estimation of DIC for Heterogeneous Strain States Full-Field Deformation Measurement via one Element Q-DIC Session 4b: Impact and High Strain Rate Behaviour Experimentation of Steel Fiber Reinforced Concrete Tri-Axial Split Strength under Quasi-Static Loading and High Strain-Rate Experimental and Numerical Characterization of the Impact Response of Polyethylene Sandwich Panel: A Preliminary Study Numerical Simulation and Testing of Water Impact of Structural Attachment Elements of a Reusable Thermal Protection System Dynamic Behavior of Advanced Ti Alloy under Impact Loading: Experimental and Numerical Analysis Session 5a: Material Behaviour Investigation of the Friction Variation with Sliding which is Commonly Observed in Individual Fretting Test Cycles Effect of Indenter Geometries on Material Properties: A Finite Element Simulation Determination of a Rubber-Like Material Model as an Inverse Problem Effect of Viscoelastic Behavior on Electroconductivity of Recycled Activated Carbon Composites Analysis of the High Strain-Rate Behaviour of Polyethylene Based Nanocomposites Session 5b: Measurement Innovations A Phase Compensation Technique of Sampling Moiré Method for Accurate Single-Shot Phase Analysis 3D/4D Strain Mapping Using In Situ X-Ray Microtomography Stroboscopic Fringe Projection Method for 3D Dynamic Displacement Measurement Speckle Pattern Characterisation for High Resolution Digital Image Correlation Evaluation of the Integrity of a Human Molar under Compressive Loading Using 3-D Axial Tomography Session 6a: Residual Stress Ultrasonic Measurement of Residual Stresses in Welded Elements of Ship Structure Measurement of Residual Stresses within a PWR Swaged Heater Tube Determination of X-Ray Elastic Constants for Q1N Submarine Pressure Hull Steel Finite Element Validation of the over-Coring Deep-Hole Drilling Technique The Validation of Weld Residual Stresses for Use in Structural Integrity Assessment Strain Evolution during Lap Shear Testing of SnCu Solder Session 6b: Vibration Analysis Model Updating of an Enclosure Using Imaginary Elements Analysis of Forces in Vibro-Impact and Hot Vibro-Impact Turning of Advanced Alloys Measurement of Tangential Contact Stiffness in Frictional Contacts: The Effect of Normal Pressure Synchronization between Driving and Illumination Signals in a High Frequency Stroboscopic Imaging System Vibratory Analysis of Turning Process A Strategy for Delivering High Torsionality in Longitudinal-Torsional Ultrasonic Devices Session 7: Validation Methods Multi-Scale Modeling of Heterogeneous Materials and the Validation Challenge Validation of Micro-Slip in Interference Fitted Shafts Subject to Complex Loading Regimes Using Numerical Models to Complement Experimental Setups by Means of Active Control of Mobility Session 8a: Damage in Composite Materials Analysis of Nonlinear Shear Deformations in CFRP and GFRP Textile Laminates Pulse Phase Thermography and its Application to Kissing Defects in Adhesively Bonded Joints Application of FBGs Grids for Damage Detection and Localisation Acoustic Emission Source Characterisation in Large-Scale Composite Structures Dynamic Properties of Cortical Bone Tissue: Impact Tests and Numerical Study Session 8b: Thermal Deformation Coupled Thermo Mechanical Characterisation of Polymers Based on Inverse Analyses and IR Measurements Experimental and Numerical Analysis of Thermal Deformation in Thermoelectric Coolers Dynamic Response of Thermally Bonded Bicomponent Fibre Nonwovens Analysis of Creep Behavior of Polypropylene Fibers Experimental Investigation of the Deformation of Built-up Members of Cold-Formed Steel Profiles Strain Analysis of Pipeline Test Specimens Containing Longitudinal and Circumferential Corrosion Defects Session 9a: Photoelasticity Experimental Study on Stress Field Parameters of an Interface Crack in Aluminum/ Epoxy Determination of All Stress Components of Axisymmetric Stress State in Photoelastic Tomography Effects of Ray Bending in Scattered Light Photoelasticity for Tempered and Annealed Glass Plates Assessment of the Interface Shear Strength of Metal-Polymer System Based on the Single Filament Fragmentation Test Method Spectroscopic Birefringence Mapping by Channeled Spectrum Session 9a: Thermomechanics The Effect of Plastic Deformation on the Thermoelastic Constant and the Potential to Evaluate Residual Stress Thermoelastic Stress Analysis of T-Stub Model The Application of Thermoelastic Stress Analysis to Evaluate Debond Damage in Composite Sandwich Structures Non-Destructive 3-D Determination of Interior Stresses Residual Stress Interaction against Mechanical Loading during the Manufacturing Process of an Assault Rifle Component


Best Sellers


Product Details
  • ISBN-13: 9783038135388
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3038135380
  • Publisher Date: 18 Aug 2011
  • Binding: Digital download and online
  • No of Pages: 500


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advances in Experimental Mechanics VIII
Trans Tech Publications Ltd -
Advances in Experimental Mechanics VIII
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advances in Experimental Mechanics VIII

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!