Advanced X-Ray Characterization Techniques
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advanced X-Ray Characterization Techniques
Advanced X-Ray Characterization Techniques

Advanced X-Ray Characterization Techniques

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS) X-ray applications and techniques are gaining importance and are moving to the forefront of science. A powerful tool with many advantages, X-ray applications and techniques present a route for rapid, hassle-free, non-destructive, safe and accurate analysis. This book contains a compilation of papers, all related to X-ray techniques, which are applied in various areas of science and technology, namely in research and industry. This publication aims to showcase the current diversity and versatility of X-ray related techniques. With contributors from all around the world, this publication of compiled papers will relate a host of X-ray related techniques with aims and the eventual findings, all of which are presented in a short and concise manner. It is believed that this book will be a good scientific literature which provides clear and important information on X-ray related ventures.

Table of Contents:
Message from Guest Editors and Conference Committees Growth of Nanocrystalline PbS Thin Films by Solid-Vapor Deposition Preparation of Co0.5Zn0.5Fe2O4 and Co0.5Mn0.5Fe2O4 Nanoferrites by Co-Precipitation Method The Effect of CaCO3 Addition on Physical Properties of ZnO-Based Crystal Glaze Surface Morphology and Si 2p Binding Energy Investigation of Multilayer Porous Silicon Nanostructure Compositional and Structural Characterization of Heterostructure InGaN-Based Light-Emitting Diode by High Resolution X-Ray Diffraction Determination of Crystallite Size in Synthetic and Natural Hydroxyapatite: A Comparison between XRD and TEM Results The Effects of Cr2O3 Addition on Fracture Toughness and Phases of ZTA Ceramic Composite Photoluminescence Properties of Porous Silicon Nanostructures (PSiNs) with Optimum Electrolyte Volume Ratio of Photo-Electrochemical Anodization Structural and Surface Studies of Undoped Porous GaN Grown on Sapphire Characterisation of Phases and Lattice Parameter in Eutectic and Hypoeutectic Al-Si-Mg-Ce Cast Alloy Structural and Thermoelectric Properties of Bi0.4Sb1.6Se3xTe3(1-X) Quaternary Compound Influence of Substrate’s Alignment Strategy to the Growth of ZnO Nano-Petals via Solution-Immersion Method Crystallization of Potassium Calcium Silicate from Modified Industrial EAF Slag Identification of Mixed-Layer Mineral of Cambodian Clays and their Phase Changes upon Firing Effect of Microstructural Evolution on the Properties of Friction Stir Processed Al 6061 Alloy under Different Cooling Conditions Crystal Structure Optimization and Semi-Empirical Quantum Chemical Calculations of N-(3,4-Dichlorophenyl)-3-Oxo-Butanamide Properties of Mortar Containing Rice Husk Ash at Different Temperature and Exposed to Aggressive Environment Mechanical Alloying of Fe-Nb-N with Different Ball to Powder Weight Ratio for the Formation of Fe-NbC Composite XRD Analysis and Tensile Properties of Attapulgite Clay Filled Polyvinyl Alcohol/Corn Starch Blend Films Intermetallic Compound Formation on Solder Alloy/Cu-Substrate Interface Using Lead-Free Sn-0.7Cu/Recycled-Aluminum Composite Solder The Effect of Amount of Surfactant and Types of Drug on Amorphous Silica Drug Delivery System (DDS) Friction Stir Processing of Mild Steel to Enhance its Surface Hardness Gel Oxidation of Titanium for Biomedical Application Production of Porous Cordierite through Sol-Gel Polymeric Sponge Method Growth of ZnO Nanostructures at Different Temperatures without Catalyst by Wet Thermal Oxidation Process The Influence of Temperature on the Oxide Layer Formation of Aluminized Carbon Steel Intermetallic Evolution of Sn-3.5Ag-1.0Cu-0.1Zn/Cu Interface under Thermal Aging WO3-Polypyrrole Nanocomposite as Catalyst in Azelaic Acid Synthesis from Oleic Acid P-Incorporated TiO2 Nanotubes for Methyl Orange Degradation The Effects of Combustion Agents on the Formation of Bi-Based Compounds Synthesized Using the Soft Combustion Method Study on the Influence of Synthesis Temperature of Anatase TiO2 Nanoparticles for Electrophoretic Deposition XRD Analysis of Cu-Al Interconnect Intermetallic Compound in an Annealed Micro-Chip Discovery of WO3/TiO2 Nanostructure Transformation by Controlling Content of NH4F to Enhance Photoelectrochemical Response XRD and EDXRF Analysis of Anatase Nano-TiO2 Synthesized from Mineral Precursors X-Ray Diffraction Study of High Velocity Oxy-Fuel (HVOF) Sprayed Cr3C2-NiCr Coating A Simple Method to Prepare Indium Oxide Nanoparticles on Si (110) The Effect of Stoichiometry to the Phase Formation of Barium Titanate Heterogeneous Combustion of Ti/Si/C Powders with Estimated Ti3SiC2 Routes Morphologies Thermal, Electrical and Physical Properties of Recycled Copper Filled Epoxy Composites X-Ray and Morphological Characterization of Al-O Thin Films Used for Vertically Aligned Single-Walled Carbon Nanotube Growth The Effect of MgO Dopant on the Dielectric Properties of CaCu3Ti4O12 Ceramics Characterization of Potential Used Rubber Seed Coat Waste for the Removal of Remazol Brilliant Blue R Reactive Dye Investigation of Grain Size Effect on the Impedance of CaCu3Ti4O12 from 100 Hz to 1 GHz of Frequency Hybrid Multiwalled Carbon Nanotubes/Minerals as Potential Fillers for Polymer Composites Structural and Optical Properties of Nanocrystalline CdO Thin Film Growth by Solid-Vapor Deposition Investigation into the Metal Oxide Surge Arrestors' Failures Structural and Microstructure Relationship with Fracture Toughness of CeO2 Addition into Zirconia Toughened Alumina (ZTA) Ceramic Composites X-Ray Diffraction Study of Cold Sprayed Ni-20Cr and Ni-50Cr Coatings on Boiler Microstructure Evolution of Sn-3.5Ag-1.0Cu-0.5Ni/Cu System Lead Free Solder under Long Term Thermal Aging Iron Salt Concentration Effect to the Precipitation of Iron Oxide Nanoparticles Conjugated Antibody Morphology and Intermetallics Study of (Sn-8Zn-3Bi)-1Ag Solder under Liquid-State Aging Synthesis, Characterisation and Catalytic Activity of Sol-Gel Derived Silica-Mineral Acids Luminescence of SrAl2O4:Eu2+, Dy3+ Ceramics Synthesized at Different Firing Condition Study on Effect Recyclability of Ru/Bentonite-TiO2 Catalysts in Glycerol Hydrogenolysis Reaction Using X-Ray Photoelectron Spectroscopy (XPS) Phase Formation of α-Cordierite Using Different Sintering Profile Preparation of Cellulose Microfibrils from Banana (Musa acuminata) Pseudo-Stem Waste Formation of Titanium Silicon Carbide (Ti3SiC2) via Modified Self-Propagating High Temperature Synthesis (SHS) System through Arc Melting Effect of Ball-Milling Parameter on the Synthesis of MWCNT/Alumina Hybrid Compound Preliminary Preparation and Characterization Studies of Cellulose from Merbau (Intsia bijuga) Synthesis and Growth Mechanism of Catalyst-Free ZnO Nanowires Using Chemical Vapour Deposition Studies of Cell Growth on TiO2 Nanotubes X-Ray Spectrometry Study on Historical Decorative Glasses in Thailand: Lanna-Style Glass Production of Biodiesel from Non-Edible Jatropha curcas Oil via Transesterification Using Nd2O3-La2O3 Catalyst X-Ray Diffraction Studies of CdxZn1-xS Thin Films Prepared by Spray Pyrolysis Technique Influence of Silica and Zirconia Particles as Filler Loading on the Radiopacity of Dental Resin Composites Synthesis and Gas Sensing Properties of SnO2 Nanostructures by Thermal Evaporation Formation of Well Aligned ZnO Nanorods Grown on Silicon Substrate by Chemical Bath Deposition Method Compressive and Wear Resistance of Alumina Reinforced Fe-Cr Matrix Composites Structural and Optical Properties of In0.27Ga0.73N/Si (111) Film Grown Using PA-MBE Technique Preparation and Characterization of Biphasic Calcium Phosphate Coatings on 316L Stainless Steel Fabricated by Electrophoretic Deposition Tin Oxide Doped on Activated Dolomites as Efficient Catalyst for Biodiesel Production Effect of Nickel on Titanium Carbide Synthesized via Tungsten Inert Gas (TIG) Method Porous Ceramic Supports Prepared from Porcelain Mixture Preparations and Characterization of Sago Starch Dispersion and Modification Synthesis and Characterization of MWCNT/Dolomite Hybrid Compound as Potential Composite Fillers Bamboo Sawdust as a Reduction Agent in Leaching Applications: Characterization Studies Crystallization of TiO2 Nanotubes Arrays Grown by Anodization of Ti in Organic Electrolyte Computational Studies of Electronic Structures and Hyperfine Interactions of Muonium in Tetraphenylgermane Role of NbC Grain Growth Inhibitor on Microstructure and Hardness of WC-Stainless Steel Hard Metals Single Step Combustion Synthesis for the Preparation of Bismuth Titanate Ceramics for Potential Applications Synthesis and Characterization of Ba0.3Sr0.7ZrO3 Ceramic Thick Films Prepared by Sol-Gel Technique Oxidative Degradation Monitoring of Natural Rubber Using S K-Edge X-Ray Absorption near-Edge Spectroscopy (XANES) Mesoporous Silica Sol-Gel as Catalyst for the Synthesis of Alkylpolyglucosides Electrical and Optical Characterization of Mg Doping in GaN Preliminary Evaluation of Mukah Clay Deposits Fabrication of Nanoporous Aluminum Oxide via a Two-Step Anodisation Process Fundamental Characterisation of Dredged Marine Sediments from Kuala Perlis Jetty by XRF, XRD and FTIR Properties of Aluminium Thin Films on Polyimide Plastics as Back Contacts in Thin Film Silicon Solar Cells Quantitative Energy Dispersive X-Ray Flourescence Analysis of Low Alloy Steel by Regression and Modified Fundamental Parameter Techniques Pb(Zr0.52Ti0.48)O3 Ceramics Synthesized Using Planetary Ball Mill Dehydration Studies of Biomass Resources for Activated Carbon Production Using BET and XRD Techniques Modeling Microfibril Angle and Tree Age in Acaciamangium Wood Using X-Ray Technique Characteristics of Airborne Pm2.5 and Pm2.5-10 in the Urban Environment of Kuala Lumpur The Effects of Superheating Treatment on Distribution of Eutectic Silicon Particles in A357-Continuous Stainless Steel Composite


Best Sellers


Product Details
  • ISBN-13: 9783037855607
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 550
  • Weight: 1050 gr
  • ISBN-10: 3037855606
  • Publisher Date: 06 Feb 2013
  • Binding: Paperback
  • Language: English
  • Spine Width: 28 mm
  • Width: 170 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced X-Ray Characterization Techniques
Trans Tech Publications Ltd -
Advanced X-Ray Characterization Techniques
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced X-Ray Characterization Techniques

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!