Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII, Volume 34, Issue 8
Home > Science, Technology & Agriculture > Industrial chemistry and manufacturing technologies > Industrial chemistry and chemical engineering > Ceramic and glass technology > Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII, Volume 34, Issue 8
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII, Volume 34, Issue 8

Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII, Volume 34, Issue 8

|
     0     
5
4
3
2
1




Available


About the Book

Ceramic Engineering and Science Proceedings Volume 34, Issue 8 - Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII A collection of 20 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the 7th International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials and Systems (Symposium 8).

Table of Contents:
Preface ix Introduction xi Creation of Surface Geometric Structures by Thermal Micro-Lines Patterning Techniques 1 Soshu Kirihara, Satoko Tasaki, and Yusuke Itakura Magnetoelectric Properties of La-Modified BiFe03 Thin Films on Strontium Ruthenate (SrRu03) Buffered Layer 9 Regina C. Deus, Cesar R. Foschini, Jose A. Varela, Elson Longo, and Alexandre Z. Simoes Properties of Pb(Zr,Ti)03/CoFe204/Pb(Zr,Ti)03 Layered Thin Films Prepared Via Chemical Solution Deposition 23 Yoshikatsu Kawabata, Makoto Moriya, Wataru Sakamoto, and Toshinobu Yogo Intelligent Processes Enable New Products in the Field of Non-Oxide Ceramics 31 Jens Eichler Fabricating Successful Ceramic Components using Development Carrier Systems 37 Tom Standring, Bhupa Prajapati, Alex Cendrowicz, Paul Wilson, and Stuart Blackburn Optimized Shaping Process for Transparent Spinel Ceramic 49 Alfred Kaiser, Thomas Hutzler, Andreas Krell, and Robert Kremer Combustion Synthesis (SHS) of Complex Ceramic Materials 57 Jerzy Lis Wear and Reactivity Studies of Melt Infiltrated Ceramic Matrix Composite 69 D. C. Jarmon and G. C. Ojard Fabrication and Properties of High Thermal Conductivity Silicon Nitride 79 You Zhou, Hideki Hyuga, Tatsuki Ohji, and Kiyoshi Hirao Porous Silicon Carbide Derived from Polymer Blend 89 Ken'ichiro Kita and Naoki Kondo Processing and Properties of Zirconia Toughened WC-Based Cermets 97 I. Hussainova, N. Voltsihhin, M. E. Cura, and S-P. Hannula Mechanism of the Carbothermal Synthesis of MgAI204-SiC Refractory Composite Powders by Forsterite, Alumina and Carbon Black 105 Hongxi Zhu, Hongjuan Duan, Wenjie Yuan, and Chengji Deng Joining of Alumina by Polycarbosilane and Siloxane Including Phenyl Groups 111 Ken'ichiro Kita and Naoki Kondo Microwave Joining of Alumina using a Liquid Phase Sintered Alumina Insert* 123 Naoki Kondo, Mikinori Hotta, Hideki Hyuga, Kiyoshi Hirao, and Hideki Kita Joining of Silicon Nitride Long Pipes without Insert Material by Local Heating Technique 129 Mikinori Hotta, Naoki Kondo, Hideki Kita, and Tatsuki Ohji Interfacial Characterization of Diffusion-Bonded Monolithic and Fiber-Bonded Silicon Carbide Ceramics 133 H. Tsuda, S. Mori, M. C. Halbig, and M. Singh Round Robin on Indentation Fracture Resistance of Silicon Carbide for Small Ceramic Products 143 Hiroyuki Miyazaki, Yu-ichi Yoshizawa, and Kouichi Yasuda Numerical Analysis of Microstructural Fracture Behavior in Nano Composites under HVEM 151 Hisashi Serizawa, Tamaki Shibayama, and Hidekazu Murakawa


Best Sellers


Product Details
  • ISBN-13: 9781118807736
  • Publisher: John Wiley & Sons Inc
  • Binding: Hardback
  • Language: English
  • Returnable: N
  • Spine Width: 18 mm
  • Width: 165 mm
  • ISBN-10: 1118807731
  • Publisher Date: 27 Dec 2013
  • Height: 244 mm
  • No of Pages: 192
  • Returnable: N
  • Weight: 498 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII, Volume 34, Issue 8
John Wiley & Sons Inc -
Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII, Volume 34, Issue 8
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials VII, Volume 34, Issue 8

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!