Advanced Materials, Structures and Mechanical Engineering II
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Mechanical engineering > Advanced Materials, Structures and Mechanical Engineering II
Advanced Materials, Structures and Mechanical Engineering II

Advanced Materials, Structures and Mechanical Engineering II

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

This book collected of the papers presented during the ICAMSME 2016 Conference. The ICAMSME is an annual conference aimed at presenting current researches in the fields of materials and materials processing technologies, structures and construction technologies, mechatronics, robotics, control, mechanical engineering, information technologies, engineering management and product design.

Table of Contents:
Preface, Committees, Sponsors Chapter 1: Advanced Materials, Chemical Technologies and Materials Processing Technologies in Mechanical Engineering Microstructure and Microhardness of Alumina-3wt. % Titania Coating Formed by a New Multi-Chamber Gas-Dynamic Accelerator Innovative Preparation Calcium Hydroxyapatite from Duck Eggshell via Pyrolysis Comparison of Fluorescence Behaviors of Rhodamine 6G with Palladium-Coated Gold Nanorods in Formations of Solutions and Thin Films Compressive Properties of Polylactic Acid-Based Nanocomposite Foams Reinforced with Coconut Fibers Study on the Radiosensitizing Applications of Gold Nanoparticles Mechanical and Morphological Properties of Poly(Lactic Acid)/Bagasse Fiber Composite Foams Research Review of Composite Electrode Materials for Super Capacitor Effect of Ti-Doped on Y134 Superconductor Investigate Effect of Ag2O Adding on Y134 Superconductor Research on the Influence of Wood Nitrocellulose Coatings Modified by Nano-TiO2 Effect of Ag2O Doping on Some Physical Properties Y145 Superconductor Preparation and Characterization of Silica Nanotubes with Cellulose as Template Investigating on the Hot Compression Behavior of 2101 Lean Duplex Stainless Steel Preparation and Luminescent Properties of Tb3+ Doped Bi2WO6 Phosphor Cotton-Fibers Used as Pore Former for the Anode with High Porosity and Long Cylindrical Pores of Solid Oxide Fuel Cells Hydrothermal Synthesis and Luminescent Properties of BiPO4:Eu3+ Phosphors Effect of Annealing on the Morphology and Photoluminescence of ZnO Thin Films Prepared by RF Magnetron Sputtering Experimental Research on Static Dent Resistance of Aluminum Alloy Double-Curved Panel Ultra-High-Precision Machining of Microscale-Diameter Zirconia Ceramic Bars by Means of Magnetic Abrasive Finishing Nitriding Effect of NaNO3 Salt in Duplex Stainless Steel Study on Erosion Wear Resistance of Internal Coating of Wear-Resistant FRP Compound Pipe Knowledge Management of Net Requirements in Using Natural Rubber in Thai Rubber Industry to Support the Increase in Using Natural Rubber within Thailand Microcrystalline Cellulose/Polyurethane Wood Material Preparation and Properties Research About Transition Reynolds Number of Filtration Magnetophoresis Process Suppress of Concentration Quenching by Site Engineering Concept Study on Deep Drawing and Mould of Meso Scale Photocatalytic Effect of Metal Oxide Nanoparticles on Cultured Human Breast Cancer Cells Effects of the Profile of Workpiece Surface on Material Removal Rate Distribution in Polishing Process Flammability of Bamboo Fabric Reinforced Polypropylene Composites and their Hybrids Numerical Simulation Research on Springback Controlling Methods of Aluminum Alloy Panel during Hydroforming Mechanical Properties and Microstructure of LR Grade a Thick Plate Welded by Double Side Gas Metal Arc Welding Study of Additional Compensation Shielding Gas Technique for Pulsed MIG Seam Welding Mechanical and Thermal Properties of Toughened PLA Composite Foams with Modified Coconut Fiber Wear Mechanism of Diamond Tool against Mold Steel in Single Point Diamond by Molecular Dynamics Synthesis of AlN Particles by Microwave-Assisted Urea Route Influence of Asymmetric Rolling on the Deformation Textures, Grain Size and Mechanical Properties of B4C/Al Composite Influence of the Unit Cell Geometrical Parameter to the Mechanical Properties of Ti6Al4V Open-Porous Scaffolds Manufactured by Selective Laser Melting An Implementation of Analytical Boundary Simulation on Feedrate Scheduling during Semi-Finish Milling Impact of Pick Skew and Tilt on Cutting Geometry Research on the Relationship between Tool Setting Error and Turning Accuracy Application of Taguchi Optimization on the Cassava Starch Wastewater Electrocoagulation Using a Bipolar Stainless Steel Electrode in the Presence Additive Electrolyte Research Progress of Oil Making from Sewage Sludge Chapter 2: Research and Design of Machine Parts and Mechanisms in Mechanical Engineering Design of a Solar Tunnel Dryer Combined Heat with a Parabolic Trough for Paddy Drying Manufacture of the Glass Nanopore Based on Laser Heating and Experimental Research Multiphase Numerical Study of Ice Accretion on Circular Cylinders in Duplex Configuration An Innovative Compression Mold Design for Manufacture of Reel Mower Helical Blades Mechanical Analysis of the Arm Lifting Rope of the Dynamic Compaction Machine Kinematic Theory of Spatial Rack Drives Dynamic Analysis on the Bend-Torsion-Shaft-Pendulum Coupling Vibration Model of Helical Gear Dynamic Analysis on the Starting Process of First Conveyor’s Scraper Chain Research on Measurement Equipment for Moment of Inertia of Triple Torsion Bars Based on Torsion Pendulum Thermal Resistance of a Rotating Closed-Loop Pulsating Heat Pipe: Effect of Centrifugal Accelerations Heat Analysis of Vehicle Drive Axle Calculation of the Grading Wheel Rotor’s Critical Speed and the Analysis of its Structure Parameters An Evaluation of the Nominal Stress Method for Life Prediction of Cylindrical Circumferential V-Notched Specimens Tested under Variable Amplitude Loading Study on Crack Propagation of a Bearing Inner-Ring under Cyclic Loading Numerical Simulation by FDM of Unsteady Heat Transfer in Cylindrical Coordinates Theoretical Investigation of Surface under Soft Mixed Lubrication Fault Feature Detection of Rolling Bearing Based on LMD and Third-Order Cumulant Diagonal Slice Spectrum Railway Equipment Reliability Test Based on Weibull Distribution Research on Rail Rolling Contact Fatigue Life of Curve Negotiation Analysis and Research on Vehicle Handling Stability of the Trapezoidal Link Rear Independent Suspension by ADAMS/CAR Study on Noise Characteristics of Facility Equipment and Subjective Responses Numerical Investigation of the Influence of the Flow Channel Gap on Performances of Axial Flow Maglev Blood Pump One-Dimensional Simulation and Experimental Investigation of the Shell-Integrated Condenser of the Underwater Closed-Loop Thermal Propulsion System Modeling an Explosive Liquid Outflow from High Pressure Thin Tubes and Nozzles Design and Fabrication of Gamma-Type Stirling Engine on Parabolic Dish of Solar Concentrator by a Compression Ratio Method Design and Test of 4LMD-160 Hemp Harvester Multi-Scale Amplitude Modulation Effect of Wind Speed Random Fluctuation Selection and Comparison of Power Cable Accessories The Key Technologies of the Hydraulic Test of 2m×2m Supersonic Wind Tunnel Chapter 3: Mechatronics, Robotics, Control and Automation Development of the Field of Cotton Plant Protection Robot Precise Multi-Topping Control System Sensorless Speed Control of Induction Motors with Method of Least Squares Development of the Field of Wheat Plant Protection Precision Spraying Robot Control System A Small-Line Segment Dynamic Transition Algorithm Based on Axial Error Tolerance The Output Characteristic Analysis for Wind Turbine Based Two Control Strategies Simple Rotary Inverted Pendulum and the Control Device Design of the Two-Wheeled Self-Balance Vehicle Testing and Analysis of Micro-Vibrations Generated by Control Moment Gyroscope in Different Installation Boundary BLDC Motor Torque Ripple Control Using Self-Tuning PID Fuzzy Control System Design and Analysis of a Micro Actuating Mechanism Driving Multi-Degree of Freedom The Smart Technologies for Movement of the Robotic Truck Caravan The Technologies for Remote Reconfiguration of Artificial Intelligence of Robotic Systems in Case of Mission or Driving Conditions Change The Mechanical Structure Design of Bionic Quadruped Walking Robot Teaching System of Arc Welding Robot Based on VB ZMP Based Motion Stability Analysis of a Wheeled Humanoid Robot with Bending Torso Fuzzy PID Control and SIMULINK Simulation of Electro Hydraulic Proportional Relief Valve Loading System Design and Construction of New Hybrid Solar Tracking System Extension Evaluation Method in the Selection of Electromagnetic Brake System Intelligent Control System Design for Electrical Equipment Management Piezoelectric Energy Harvester Adjusted by Light-Induced Actuator Lift Augmentation between Passive and Active Vortex Generator Preliminary Study of Airflow Energy Recovery System for Electric Vehicles: Performance of VAWT with Air Duct Study on Features of 532nm Laser as Laser Source of Lidar Chapter 4: Data and Signal Processing, Computational Methods and Algorithms Improved Grey Wolf Optimization Algorithm for Constrained Mechanical Design Problems Study on Methods for Improving LMD End Effect Study of 3D Tolerance Modeling Method for Complex Feature Geometric Variations Processing Method for End Effect of Local Mean Decomposition Based on Extreme Point and Distant Research on Positioning Algorithm Based on the Gaussian Distribution Function and Partial Estimation of the Fusion Theory Efficiency of Solution Methods for Kepler’s Equation Chapter 5: Information Technologies Analysis and Implementation for the RPG Boxing Game Personalized Ring Design and Rapid Manufacturing Based on Reverse Engineering and 3D Printing Information Feedback for Human Motor Skill Transferring System Using Augmented Reality Study of XML Indexing Structure Based on XISS Research on the Construction of "Metal Materials and Heat Treatment" Network Course to Higher Vocational Colleges under the Background of Big Data Research on Electric Power Multiservice Access Support SDN Technology Research on Communication Architecture of Power Terminal Access Network Chapter 6: Geotechnical Engineering, Structural Engineering, Architecture and Urban Planning Influence of Summer Outdoor Pedestrian Wind Environment Comfort with Height-to-Width Ratios of Arcade in Taiwan New Green Building Materials Study on Fundamental Frequency of Airport Runway Based on Elastic Layered Soil Model Present and Future Research of Mortise and Tenon Joint in Timber Structure The Application of Research Methods in Soil Macropores in Vadose Zone of Well Vegetated Slope The Green Building’s Spatial Characteristics in Traditional Residence Research on the Sustainability of Urbanization in China Evaluation of Industrial Tendency of Sustainable Development in the City of Weifang Investigation of Ways to Reduce Road Traffic Noise of Apartment Complexes Using Computer Simulation Effect of Changes in Temperature on Resilient Materials Dynamic Stiffness and Floor Impact Sound Evaluation of Reduction Performance of Floor Impact Sound on Floor Covering in the Reverberation Chamber Light Expand Clay Aggregate Medium Cultivation of Plants Used in Green Roof Feasibility Studies Evaluation of the Tourism Traffic Carbon Footprint in Xingwen World Geopark Firefighting Capacity Assessment in Armed Forces Hospitals Hydrologic Analysis of Highway Bridge Crossing Tributary Finite Element Prediction on the Post-Punching Behavior of Slab-Column Connections Structural Strength Analysis and Measurement of Composite Laminate Using Finite Element Method and FBG Sensor The Study on the Relationship between the Deformation of Resistance and Temperature and Rate of Ti-IF Steel Seismic Analysis of a High Rise Antique-Style Pagoda with Steel Reinforced Concrete Composite Structure Theoretical Analysis and Experimental Verification of the Stress Concentration Factor at the Steel Tube-Welded Hollow Sphere Connection Node The Appraisal and Strengthening Design of a Large Adding Layer Supermarket Reinforced Lime Concrete with FRP: An Alternative in the Restoration of Architectural Heritage Influences of Subgrade Structure Form on Dynamic Responses of Railway Subgrade under Cyclic Loading Brief Introduction of Visualization of Optimum Structural Design Brief Discussion about the Changsha Yuan Da Steel Structure Residence System The Fatigue Properties of the M27 Higher Strength Bolt in the Grid Structure with Bolted Spherical Joints Stress Analysis of Dongjiang Arch dam by Finite Element Method under Different Concrete Elastic Modulus and High-Low Temperature Seasons Evolutionary Optimization of Frame Structures Taking into Account the Project Reliability and Possibility of Emergency Actions Review of Thermal Performance: A Terrace House in Melaka, Malaysia Experimental Study on the Max Crack Width of Steel Fiber Reinforced High-Strength Concrete Beams Experimental Studies on GFRP Reinforced Concrete Mixed with Sea Sand and Sea Water Field Model Simulation and Analysis for a Residential Building Fire Simulation and Optimization of the Construction Sequence of the Lock Gate of the Lock Gate Based on Numerical Analysis Study of Effective Thermal Conductivity of Glazed Hollow Bead Concrete Bending Fatigue Performance of Pre-Stressed Concrete Beams Containing Mineral Admixtures Mass and Stiffness Matrices Updating Using the First Modal Data Application of Support Vector Machine for Prediction of Slope Stability Coefficient Considering the Influence of Rainfall and Water Level Experimental Test of Chloride Penetration in Reinforced Concrete Subjected to Wetting and Drying Cycle Oil Palm Frond as an Alternative Material to Reinforce the Fiber Brick Influence of Compaction Energy and Bentonite Clay Content in the Soil Hydraulic Conductivity Analysis on the Causes of Fatigue Accidents of a Bolt-Ball Structure Plant in Shanxi Chapter 7: Engineering Management and Product Design Research on the Visual Impact of the Mobile Device Chinese Word Colors and Fonts for the Aged Variation of Work Productivity Performance at Different Levels of Production Standard Time Design of Multi-Function Fashion Chair Based on Human Factors Engineering Multifunctional Sofa Design Based on the Human Factors Engineering Analysis of Safety Hazard Factors and Fuzzy Comprehensive Evaluation of Mine Main Ventilator Research of High-Speed Rail Express Delivery Market Demand Prediction Problem in China Collaborative Information Research on Fresh Production under Supply Chain Environment Research on the Fashion Design of Paper Stocks Tea Gift Packaging Combined with Color Design Application of BIM in the Full Cycle Metro Project Design and Development of Fumigation Treatment Bed Based on Simulation Technology Based on the People because of the Intelligent Family Combination of Integral Ambry Design Design of Multifunctional Children Electric Vehicle Based on Human Factors Engineering


Best Sellers


Product Details
  • ISBN-13: 9783035701944
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3035701946
  • Publisher Date: 12 Aug 2016
  • Binding: Digital download and online
  • No of Pages: 968


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Materials, Structures and Mechanical Engineering II
Trans Tech Publications Ltd -
Advanced Materials, Structures and Mechanical Engineering II
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Materials, Structures and Mechanical Engineering II

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!