Advanced Materials and Application II
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Mechanical engineering > Advanced Materials and Application II
Advanced Materials and Application II

Advanced Materials and Application II

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

This volume contains papers presented at the 2019 International Symposium on Advanced Materials and Application (ISAMA 2019), which took place in Seoul, South Korea, on January 18-20, 2019. The proceedings introduce to the readers with the newest researches results and findings in the field of materials properties and testing, materials application, materials behavior simulation and analysis, materials manufacturing, and processing.

Table of Contents:
Preface Chapter 1: Metallurgical and Metalworking Technologies Study on Factors which Make CBN Insert can Turn S45C Steel Have Surface Roughness Less than Ra 0.4 Weldability of Similar and Different Metallic Materials Computer Simulation and Analysis of the Parameters of the Drawing Process of Thin Wire from the Alloy Pd-5Ni Study of the Influence of Conditions of Combined Casting and Rolling-Extruding and Two-Stage Annealing on the Structure and Properties of Semi-Finished Electrical Products from an Al–Zr System Alloy Computer Modeling and Analysis of the Energy-Power Process Parameters of the Combined Machining of Alloys Al-Mg System Investigation of Side-Dam Plate in Single-Wheel Caster for Casting Rods Forming of Small Projection on Roll-Cast A356 Strip by Cold Rolling and Small Groove on PET Plate Using A356 Die 600 mm-Wide Strip Casting Using Single Roll Caster Equipped with Scraper Effect of Latent Heat of Aluminum Alloys on Bonding between Strips in Clad Strip Cast by a Twin-Roll Caster Chapter 2: Functional Ceramics and Fiber Composites Mechanical Properties of PP/clay Nanocomposites Prepared from Masterbatch: Effect of Nanoclay Loadings and Re-Processing Influence of Sintering Temperature on Physical and Mechanical Properties of Hydroxyapatite-Calcium Titanate Composite Physical and Mechanical Properties of Bi0.5(Na0.81K0.19)0.5TiO3 Ceramic Modified by KNbO3 An Analysis of Air Permeability of Cotton-Fibre-Based Socks Examining Moisture Management Property of Socks Mechanical and Rheological Properties of High Density Polyethylene Reinforced Polyvinyl Alcohol Fiber Composites Nanomaterial Production by Arc Discharge Sputtering of Silicon-Graphite and Silica-Graphite Composite Anodes Corrosion Behaviors of Reinforcing Steel in Concrete with Various Moisture Contents Chapter 3: Chemical Technologies in Environmental Engineering, Bioindustry and Energy Production Predictive Study of Combustion Temperature of Liquefied Petroleum Gas (LPG) on the Spherical Packed-Bed Porous Burner The Influence of Stainless Steel Mesh Porous Burner on Drying Kinetics of Nile Tilapia Green Synthesis of Iron Oxide Nanoparticles for Lead Removal from Aqueous Solutions Microwave Assisted Extraction (MAE) Process of Tannin from Mangrove Propagules Waste as Natural Dye for Coloring Batik tulis "Green" Bleaching Process of Sugar Palm (Arenga pinnata) Flour by Using Sodium Salt and Ozone Technology Fundamentals and Applications of Red Light-Emitting Diodes (LEDs) In Vitro Plant Growth on Tomato Lycopersicon esculentum Mill Production of Microsphere Polystyrene Using Solution Enhanced Dispersion by CO2 Supercritical Fluids (SEDS) Chapter 4: Materials and Technologies in Construction Geometric Analysis of a Modular, Deployable and Reusable Structure Study on Service Life of OPC and HPC in Marine Environment Confinement Shear Effect in Fiber Composites Original Experimental Campaign of Indentation Instrumented on Aggregates of Non-Hazardous Waste Incineration Bottom Ash to Study the Heterogeneity of their Rigidity Chapter 5: Mechanical Properties and Durability of Structural Materials Failure on Bearing Cooler Coils Connector of Hydroelectric Power Plant Buckling Analysis of Variable Stiffness Composite Cylindrical Shells Based on Hermite Curves Elastoplastic Equilibrium of a Hollow Thick-Walled Radially Inhomogeneous Ball Stresses Analysis of Hypocycloidal Gear Transmissions


Best Sellers


Product Details
  • ISBN-13: 9783035733150
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3035733155
  • Publisher Date: 05 Jun 2019
  • Binding: Digital download and online
  • No of Pages: 226


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Materials and Application II
Trans Tech Publications Ltd -
Advanced Materials and Application II
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Materials and Application II

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!