Advanced Materials and Engineering Materials X
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Advanced Materials and Engineering Materials X
Advanced Materials and Engineering Materials X

Advanced Materials and Engineering Materials X

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

This volume contains papers presented at the 10th International Conference on Advanced Materials and Engineering Materials (ICAMEM 2021), which took place on May 29-30, 2021 (virtual) and the 7th International Conference on Mechanical Structures and Smart Materials (ICMSSM 2021, June 14-15, 2021, in Changsha, China). Collected papers reflect the latest achievements in the field research of materials properties and development and analysis technologies of theirs processing.

Table of Contents:
Preface1 Preface2 Chapter 1: Properties and Processing Technologies of Steel and Alloys Increasing the Efficiency of Production of Synthetic Cast Iron Castings Numerical Simulation of the Influence of Different Surface Morphologies on Molten Pool Flow under Moving Heat Source Experimental and Numerical Examination on Formability and Microstructure of AA3003-H18 Alloy in Single Point Incremental Forming Process Influence of the Different Combination of Diameters of Two Tool Heads on Forming Quality in Double Sided Incremental Forming Effect of Frictional Conditions in Deep Drawing on Formability Microstructure Evolution of AlSn20Cu Alloy Prepared by Conventional Casting and Semi Continuous Casting during Rolling and Annealing Effect of Pouring Temperature on Microstructures and Mechanical Properties of 7085 Ingot Casting by Finite Element Analysis Coarse Columnar Dendrites of GH3039 Nickel-Based Alloy at Diverging Grain Boundaries during Wire and Laser Additive Manufacturing: A Phase Field Simulation Effects of W Addition on Microstructure and 650 °C Mechanical Properties of Ti-Al-Sn-Zr-Mo-Nb-W-Si Alloy Investigation of the Effect of Modifying the AlSi7Mg0.3 Alloy with a Fast-Cooled Master Alloy Using Heat Treatment Microstructure Evolution of AS41 Magnesium Alloy in ECAP Effects of Heat Dissipation from Friction Stir Welding to Microstructures of Semi-Solid Cast 6063 Al Alloy Effect of Pre-Aging on Properties of CuCrSn Alloy during Rolling and Aging Effect of Twice Stablizing Heat Treatment on the Properties of 347H Stainless Steel Effects of Stabilizing Heat Treatment on Properties of Simulated Microstructures in the Heat-Affected Zone of 347H Stainless Steel Effect of Tempering Temperature on Microstructure and Corrosion Resistance of Plastic Mould Steel S136 SUP Hydrogen Diffusion Influence on the Stabilizing Phases Behavior in the Ti-6Al-4V Alloy Kinematic Viscosity and Electrical Resistivity of a Multicomponent Melt due to Liquid–Liquid Structure Transition Influence of High Temperature Annealing on Microstructure Evolution of Ni-24Fe-14Cr-8Mo Superalloy Effect of Heat Treatment Conditions on Microstructures and Mechanical Properties of Cu-9Ni-6Sn-0.22Nb Alloy Life and Flaking Failure of 13Cr-2Ni-2Mo and SUS440C Stainless Steel Bearings in Water Casting of Wire Using a Twin Wheel Caster Effect of Cold Rolling on the Microstructure and Mechanical Behaviors of High-Nitrogen and Low-Nickel Alloy Study on Mechanical Properties of Lost Foam Pattern in Machining Study on Microstructure and Properties of Welded Joints with Low Strength Backing Layer for WELDOX960 Chapter 2: Polymers and Composites Measuring and Testing Composite Materials Used in Aircraft Construction Experimental and Modeling Study on High Velocity Penetration of a Carbon/Epoxy Composite Laminate The Effect of Sintering Profiles on Zirconia Toughened Alumina (ZTA) Prepared by Two-Stage Sintering Study on Test Methods of Tensile Properties of Continuous Alumina Fiber Bundles The High-Temperature Tensile Test of Quartz Fiber Fabric- Reinforced Resin Composites Thermoplastique Degradation under Heat and Irradiation Exploration of Thermal Degradation Kinetics of Epoxy Resin Composites Effect of Eggshell Powder Using for an Extender on the Mechanical and Thermal Behaviors of Polylactic Acid Composites Powder Injection Moulding and Liquid Phase Sintering of Aluminium - SiC Particulate Composite Effect of Rice Flour Types on the Properties of Nonwoven Pineapple Leaf Fiber and Thermoplastic Rice Starch Composites Improving Study on Wear Resistance and Mechanical Properties of Graphene / Polyurethane Microfoam Composites Effect of Short Banana Fiber on Hardness and Tensile Properties of Natural Rubber Composites Microscopic Study of Coated Carbon Fibre Reinforced Copper Matrix Composite Samples Influence on Tribological Behavior of PEEK Composite Film Layer on PEEK-PTFE Bearings with Artificial Defect in Dry Condition Effect of Corn Straw Addition on Mechanical Properties of Polyvinyl Alcohol Hydrogel A Study on the Mechanical Properties of 3D Printed PLA Specimens According to Infilled Pattern and Printing Direction Experimental Study of Tool Wear when Milling Tropical Wood with Various Tool Materials Distributions of Stress and Interlaminar Shear Stress in Laminates under Normal Load Chapter 3: Materials for Biomedical Application The Effect of Resin-Based Dental Sealant Containing Vanillin on Biofilm Formation of Candida albicans Anti-Biofilm Formation of an Adhesive Containing Calcium Salts of Acidic Monomers against Oral Candida Related to Root Caries Coating of Polystyrene Surface with REDV-Gelatin Conjugate for Selective Isolation of Endothelial Cells Antibacterial Effect of Gold Nanoparticles Coated Dental Floss against Cariogenic Bacteria Antibacterial Effect of Experimental Orthodontic Adhesives Containing Gold Nanoparticles against Streptococcus mutans and Streptococcus sobrinus The Effect of Raw Materials on the Properties of Oxidized Cellulose Nanofibers from Bacterial Cellulose A Study on Nano-Flow Control of Bio-Inspired Nanosized Ion Channel Large-Scale Synthesis of Glutathione-Coated and 68Ga- Labeled Gold Nanoclusters for PET/CT Imaging of Tumors Chapter 4: Ceramics, Functional Materials and Special Technologies Preparation of M2SiO4:Tb3+, Mn2+, Nd3+ White-Emitting Phosphors (M = Mg2+, Ca2+, Sr2+, and Ba2+) and the Influence of M2+ Cations on their Luminescent Performance Effect of Sulfurization Process on Octahedral Molybdenum Cluster from Mo6 Cluster to MoS2 Nanosheet Fabrication of YSZ-Carbon Felt Composite Materials by Spark Plasma Sintering Process Research on Control Factors and Performance of YAG Porous Ceramics Hydrothermal Fabrication of BiVO4/ Diatomite Composite Photocatalysts and their Photocatalytic Performance Structural and Optical Studies of Lithium Doped Barium Titanate Study on Low Temperature Conduction Mechanism of Al Doped ZnO/SiO2/ P-Si Heterojunction Contact Angle Measurement of Melting SnAgCu Solder Paste Mix with Carbon Allotropes Using In-Line Digital Holography Technique An Experimental Study on Electrosparking of Tool Electrode Forced Cooling Based on Micro Heat Pipe Bundle Brazing of Porous Copper Foam with Copper Sheet Using CuNiSnP Amorphous Filler Metal The Potential Use of Brick Wastes in the Generation of New Materials for Construction through Geopolymerization Processes Investigation the Ultrasonic Vibration on Tin Soldering Welding of Copper Wires and Plates Chapter 5: Materials and Technologies of Environmental Engineering, Waste Recycling Experimental Study on Biological Treatment of Copper in Acid Mine Drainage after Iron Removal An Effect of pH on Radiation Assisted Modification of Oxygen-Rich Activated Carbon by Urea Characterization of Coal Fly Ash, Bottom Ash and their Possibilities as Catalysts for Biodiesel Production Synthesis of Sustainable and High Purity of Quicklime Derived from Calcination of Eggshell Waste in a Laboratory-Scale Rotary Furnace Chapter 6: Building Materials Strength Development and Microstructural Investigation of Calcium Carbide Residue and Fly Ash Prepared with Optimized Alternative Green Binders Development of an Alternative Cementitious Materials Based on Calcium Carbide Residue and Silica Fume Thermal Insulation Performances of Plaster Composites Based on Embedding Natural Rubber Latex Compound Effect of Alkali Treatment on the Mechanical Property of Natural Fiber in a Concrete-A Mini Review Fresh, Durability and Mechanical Behavior of Self Consolidating Concrete Incorporating Fly Ash and Admixture under Hot Weather Detection of Reclaimed Asphalt Pavement Presence in Asphalt Mixtures Using a Method of Successive Asphalt Binder Extraction Experimental Evaluation of Moisture Damage and Rutting Resistance for SBS Modified Warm Mix Asphalt Incorporating Recycled Asphalt Concrete Chapter 7: Optimization of Materials Processing Technologies Parameters The Method of Constructing a Multidimensional Model for Finding the Values of the Parameters of the Incremental Sheet Forming Process Optimization of Machining Parameters for Improving Accuracy of Dimension and Shape of Bent Part in Rotary Draw Bending Dilution Optimization of Laser Cladding Assisted by Pulsed Current Based on Genetic Algorithm and Neural Network Chapter 8: Tribology, Corrosion and Coatings Contact-Fatigue Resistance of PM Steel with Hard Coatings Effect of Sensitization Time on Intergranular Corrosion of 347H Stainless Steel Microstructural Characteristic and Solid Particle Erosion Behavior of Plasma-Sprayed Ni60/Ni-WC Composite Coating Corrosion Protection of Nano-Silica Powder Coatingon Artificial Seawater A Failure Analysis Case of Regeneration Gas Heater Leakage


Best Sellers


Product Details
  • ISBN-13: 9783035738773
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • ISBN-10: 3035738777
  • Publisher Date: 22 Nov 2021
  • Binding: Digital download and online
  • No of Pages: 556


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Materials and Engineering Materials X
Trans Tech Publications Ltd -
Advanced Materials and Engineering Materials X
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Materials and Engineering Materials X

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!