Metal Forming Plasticity by H. Lippmann at Bookstore UAE
close menu
Bookswagon
search
My Account
Home > Science, Technology & Agriculture > Technology: general issues > Engineering: general books > Metal Forming Plasticity: Symposium Tutzing/Germany August 28 – September 3, 1978(IUTAM Symposia)
Metal Forming Plasticity: Symposium Tutzing/Germany August 28 – September 3, 1978(IUTAM Symposia)

Metal Forming Plasticity: Symposium Tutzing/Germany August 28 – September 3, 1978(IUTAM Symposia)


     0     
5
4
3
2
1



Available


X
About the Book

The International Union of Theoretical and Applied Mechanics (IUTAM) which is the head organisation of most of the existing national and international societies of mechanics, decided to sponsor a Symposium on METAL FORMING PLASTICITY. It was held near Munich (Federal Republic of Germany) between August 28 and September 3, 1978, in the "Evange- lische Academy" in the Castle of Tutzing which is situ- ated in a park at Lake Starnberg overlooking the Alps. The subjects of the Symposium were basic aspects of the theoretical and experimental mechanics of metal form- ing processes rather than technological details, or plas- ticity as such. Thus the spectrum of the Conference extended from necessary physical background, through ex- perimental, analytical, or numerical methods, to appli- cations to specific technological deformation processes such as rolling, deep drawing, extrusion, etc. The following persons were by the IUTAM-bureau ap- pointed to membership of the "Scientific Committee" which was responsible for the nomination of participants as well as for the form of the scientific program: w. Johnson (U.K.), H. Kudo (Japan), H. Lippmann (F.R.G, chairman), G.S. Pisarenko (USSR), anc W. Szczepinski (Poland) . The technical organisation was in the hands of a "Local Organizing Committee" formed by VI F. Fischer, K. Heckel, G. Kuhn, H. Lippmann (chairman), K. Magnus, V. Mannl, G. Sonntag, all of them from Munich and K. Lange (Stuttgart), O. Pa'Nelski (DUsseldorf) . This committee was supported by two secretaries, i.e.

Table of Contents:
On the Prediction of Necking in Anisotropic Sheets.- On the Theoretical and Experimental Description of the Mechanical Behaviour of Metals during Metal Forming Processes.- Spin-Forging of Sheet Metal Cones Having Various Cone Angles from 70/30 Brass and Commercially Pure Aluminium.- Residual Stresses in Deep Drawn Cups and Sunk Tubes.- On the Complete Numerical Solution of the Axisymmetrical Deep-Drawing Problem.- Application of the Stereophoto- grammetric Methods to the Analysis of the Kinematics and Dynamics of Shells.- Deformations finies en coordonnées locales et application à un problème d’emboutissage.- Optimum Deformation Rate in Large Inelastic Deformations.- New Trends in Tube and Bar Processing.- Analysis of Large Deformation and Stress in Metal Forming Processes by the Finite Element Method.- Stress and Deformation Analysis of Metal-Forming Processes.- Inhomogeneity of Deformation and Tool Design.- A New Approach for Generalized Three-Dimensional Extrusion of Sections from Round Billets by Conformal Transformation.- Ideal Metal Forming.- The Application of Singular Perturbation Techniques to the Analysis of Forming Processes for Strain-Hardening Materials.- Allowing for a Variable Flow Stress in the Analysis of Metal Working Processes.- Plastic Deformations with Free Boundaries — A Finite Element Approach.- Finite-Element Formulation for the Analysis of Plastic Deformation of Rate-Sensitive Materials in Metal Forming.- Theoretical Solutions of Some Plastic Working Processes in the Light of Experimental Evidence.- Analysis of Metal Forming by the Rigid-Plastic Finite Element Method Based on Plasticity Theory for Porous Metals.- Mechanics of Creep in Metal Forming.- Modeling of the Tool-Workpiece Interface.- Drawing of Fiber Reinforced Tubes.- Stressesand Strains in Deformation of Clad Metals.- Joint Examination Project of Validity of Various Numerical Methods for the Analysis of Metal Forming Processes — Report Given and Comments Made at the Pound Table Discussion of the Symposium.


Best Sellers


Product Details
  • ISBN-13: 9783642813573
  • Publisher: Springer-Verlag Berlin and Heidelberg GmbH & Co. KG
  • Publisher Imprint: Springer-Verlag Berlin and Heidelberg GmbH & Co. K
  • Height: 235 mm
  • No of Pages: 404
  • Returnable: N
  • Sub Title: Symposium Tutzing/Germany August 28 – September 3, 1978
  • ISBN-10: 3642813577
  • Publisher Date: 22 Dec 2011
  • Binding: Paperback
  • Language: English
  • Returnable: N
  • Series Title: IUTAM Symposia
  • Width: 155 mm


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Metal Forming Plasticity: Symposium Tutzing/Germany August 28 – September 3, 1978(IUTAM Symposia)
Springer-Verlag Berlin and Heidelberg GmbH & Co. KG -
Metal Forming Plasticity: Symposium Tutzing/Germany August 28 – September 3, 1978(IUTAM Symposia)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Metal Forming Plasticity: Symposium Tutzing/Germany August 28 – September 3, 1978(IUTAM Symposia)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!
    Your IP: 216.73.216.124 IN