About the Book
The VETOMAC-X Conference covered a holistic plethora of relevant topics in vibration and engineering technology including condition monitoring, machinery and structural dynamics, rotor dynamics, experimental techniques, finite element model updating, industrial case studies, vibration control and energy harvesting, and signal processing.
These proceedings contain not only all of the nearly one-hundred peer-reviewed presentations from authors representing more than twenty countries, but also include six invited lectures from renowned experts: Professor K. Gupta, Mr W. Hahn, Professor A.W. Lees, Professor John Mottershead, Professor J.S. Rao, and Dr P. Russhard.
This work is of interest to researchers and practitioners alike, and is an essential book for most of libraries of higher academic institutes.
Table of Contents:
Preface.- List of Scientific committee.- Part-1: Keynote Lectures.- Ancient Temple Carts – Modifications for Structure and Steering, by J. S. Rao, Bigil Kumar.- The Rise and Fall of the Rotor Blade Strain Gauge, by Peter Russhard.- Managing life extension for large rotating plant in power stations, by Wolfgang Hahn.- Recent Advances and Prospects in Condition Monitoring, by Arthur W Lees.- The Sensitivity Method in Stochastic Model Updating, by John E Mottershead, Michael Link, Tiago A N Silva, Yves Govers, Hamed Haddad Khodaparast.- Composite Shaft Rotor Dynamics: An Overview, by K. Gupta.- Part-2: Contributed Papers/Chapters.- Investigation of the synchronous response in a back-back centrifugal compressor due to imbalance and seal distortion, by Mohamed Al Yahyai, David Mba.- Comparison of On-Bearing and On-Casing Vibration for Blade Health Monitoring in Rotating Machine, by Ahmed A. Gubran, Jyoti K. Sinha.- Vibration-based Condition Monitoring for Rotating Machinery with Different Flexible Supports, by Adrian D. Nembhard, Jyoti K. Sinha.- Off-line Crack Detection in Rotors, by Erfan Asnaashari, Jyoti K. Sinha.- Application of Composite Spectrum in Steam Turbo-Generator Set, by Keri Elbhbah, Jyoti K. Sinha, W. Hahn, G. Tasker.- Coherent Composite HOS Analysis of Rotating Machines with Different Support Flexibilities, by Akilu Yunusa-Kaltungo, Jyoti K. Sinha.- Vibration Behaviour of a Turbo-Generator Set, by Wolfgang Hahn, Jyoti K. Sinha.- A Comparison between Hilbert Transform and new method for signal enveloping, by Abdullah Al-Ahmari, Dr. Jyoti K. Sinha, Erfan Asnaashari.- The Detection of Shaft Misalignments using Motor Current Signals from a Sensorless Variable Speed Drive, by Samieh Abusaad, Ahmed Benghozzi, Ann Smith, Fengshou Gu, Andrew Ball.- Analysis of sgtf vertical sodium pump using ARMD, by Hemant Prakash Agnihotri, V. Prakash, K. K. Rajan.- Qualification of large structures for Shock Loads, by K. K. Meher, A. Rama Rao.- Hybridviscous-structural damping identification method, by Vikas Arora.- Effectiveness of adaptive filter algorithms and spectral kurtosis in bearing faults detection in a gearbox, by Faris Elasha, David Mba, Cristobal Ruiz-Carcel.- Pitting detection in worm gearboxes with vibration analysis, by Faris Elasha, David Mba, Cristobal Ruiz-Carcel.- Impact vibrations of ultrasonic multi-striker hand tool, by Makhmut Ganiev, Ilshat Gafurov, Ildar Vagapov.- Use of the roving mass technique and SWT to identify and locate multiple cracks in simply-supported beams, by Amirabbas Bahador, S Olutunde Oyadiji.- Single and multiple crack detection in simply-supported beams using SWT, by Amirabbas Bahador, S. Olutunde Oyadiji.- Synthesis of Vibration Gear Continuously Variable Transfer, by Konstantin S. Ivanov, Roza K. Koilibaeva, Gachip Ualiev, Baurjan Tultaev.- Crack propagation in a 500MW LP turbine in service, by Wolfgang Hahn, David Futter.- Effect of Ultrasonic Oscillations on the Interaction of Al with Ga-In Eutectic Alloy, by Alexey A. Novikov, Alexandr I. Nizovskii, Mikhail V. Trenikhin, Valerii I. Bukhtiyarov.- Nonlinear Control of an Aeroelastic System with a Non-smooth Structural Nonlinearity, by Shakir Jiffri, John E. Mottershead.- A Block Decoupling Control Algorithm for Vibration Suppression of Linear Structures, by Xiaojun Wei, John E Mottershead.- Measurement and Simulation of the Vibroacoustic Performance of an Electric Motor, by Alex McCloskey, Xabier Arrasate, Xabier Hernandez, Oscar Salgado.- Forced Vibration of Eight Mistuned Bladed Disks on a Solid Shaft – Excitation of the First Compressor Bladed Disc, by Romuald Rzadkowski, Artur Maurin.- Dynamic Analysis of Parametrically Excited Piezoelectric Bimorph Beam for Energy Harvesting, by S. K. Dwivedy, Anvesh K. Reddy, Anshul Garg.- Multi-parametric Analysis of Drill String Vibrations, by Almaz Sergaliyev, Julius Kaplunov, Lelya Khajiyeva.- Tuned Mass Damper Inverted Pendulum to Reduce Offshore Wind TurbineVibrations, by P.V.B. Guimarães, M.V.G.de Morais, S.M. Avila.- Vibration Control of Active Vehicle Suspension System using Fuzzy Logic Controller, by A. Shehata, H. Metered, Walid A. H. Oraby.- Two-stage data driven filtering for local damage detection in presence of time varying signal to noise ratio, by Jakub Obuchowski, Agnieszka Wylomanska, Radoslaw Zimroz.- Energy Harvesting from Near Periodic Structures, by P. V. Malaji, S. F. Ali.- Dynamic Analysis of Multilayered Sandwich Beam with MRE Core, by S. K. Dwivedy, S. L. V. N. Avinash.- Analysis of Coupled Transverse and Axial Vibrations of Euler Bernoulli and Timoshenko Beams with Longitudinal Crack for its Detection, by Jeslin Thalapil, Surjya K. Maiti.- Detection of Arbitrary Number of New Cracks Appearing in a Beam with Pre-existing Cracks, by Dhanjee K. Mahto, Surjya K. Maiti.- Acoustic technique for Diverse Safety Rod drop time measurement in PFBR, by V. Prakash, Hemant Prakash Agnihotri, P. Anup Kumar, R. Ramakrishna, K.K. Rajan.- Large Amplitude Free Vibration Analysis of Axially Functionally Graded Tapered Rotating Beam by Energy Method, by Saurabh Kumar, Anirban Mitra.- A frequency-based criterion for automatic selection of the optimal Intrinsic Mode Function in diagnostics of localized gear tooth faults, by Pawel Rzeszucinski, Michal Juraszek, James R. Ottewill.- Vehicle Suspension Performance Analysis Based on Full Vehicle Model for Condition Monitoring Development, by Moamar Hamed, Belachew Tesfa, Fengshou Gu and Andrew. D. Ball.- Effects of Monograde and Multigrade Oils on the Friction Force in Four-Stroke Motor Engine: An Experimental and Analytical Approach, by Anastasios Zavos, Pantelis G. Nikolakopoulos.- Delamination Detection in a Laminated Composite Beam Based on Changes in Natural Frequencies, by Kajal Khan, Surjya K. Maiti.- Robustness evaluation of adhesively bonded ceramic quad flat chips for space applications, by Lassaad Ben Fekih, Georges Kouroussis, Christophe De Fruytier, OlivierVerlinden.- Coupling analysis for the thermo-acoustic-vibration response of a thin-walled box, by Yan Yang, Chen-Wu Wu.- Chatter Detection in CNC Milling Processes Based on Wiener-SVM Approach and Using Only Motor Current Signals, by M. Lamraoui, M. El Badaoui, F. Guillet.- Dynamics of the Unbalanced Support Centrifuge with Cavity Partially Filled with a Multiphase Liquid Medium, by Almatbek Kydyrbekuly, Lelya Khajiyeva.- Design and Test of a Piezoelectric Inertial Mass Actuator for Active Vibration Control, by Sven Herold, Dirk Mayer, Tobias Melz, Tobias Röglin.- Heat Transfer and Thermoelastic Dynamics of a Rotating Flexible Disc in a Hard Disc Drive, by Yong-Chen Pei, Huajiang Ouyang.- A New Direct Method for Updating Mass and Stiffness Matrices with No Spillover, by Jiafan Zhang, Huajiang Ouyang, Jun Yang.- Wave Propagation in a Honeycomb Composite Sandwich Structure in the Presence of High-density Core Using Bonded PZT-sensors, by Shirsendu Sikdar, Sauvik Banerjee.- Health monitoring of stiffened metallic plates using nonlinear wave interaction and embedded PZT transducers, by Deba Datta Mandal, Debashis Wadadar, Sauvik Banerjee.- Using Roving Disc and Natural Frequency Curves for Crack Detection in Rotors, by Zyad N. Haji, S. Olutunde Oyadiji.- Vibration based diagnosis of distributed bearing faults, by Boštjan Dolenc, Pavle Boškoski, Jurij Pfajfar, Đani Juričić.- Freight Car Roller Bearing Fault Detection using Artificial Neural Networks and Support Vector Machines, by Daniel Maraini, C. Nataraj.- Light rotor-stator partial rub characterization using Instantaneous Angular Speed measurement, by Sanjin Braut, Roberto Zigulic, Goranka Stimac, Ante Skoblar.- Sequential recurrence analysis of experimental time series of a rotor response with bearing outer race faults, by C.A. Kitio Kwuimy, M. Samadani, K. Kappaganthu, C. Nataraj.- Adhesive Layer Influence on Compressive and Tension Stiffness of Thin-Layer Rubber-Metal Elements, by Vladimirs Gonca, SvetlanaPolukoshko, Galina Hilkevica.- Multi speed model updating of rotor systems, by Manoj Chouksey, Jayanta K. Dutt, Subodh V. Modak.- Vibration Control of Semi-Active MR Seat Suspension for Commercial Vehicles using Genetic PID Controller, by S. Gad, H. Metered, A. Bassuiny, A. M. Abdel Ghany.- Identification of Hysteretic Behavior of Magnetorheological Dampers using NLARX Model, by A. Shehata, H. Metered, and W. Oraby.- Online roundness error identification and model-based monitoring for rotors, by Markus Rossner, Thomas Thuemmel, Heinz Ulbrich.- Study on dynamic load sharing characteristics of double-row planetary gear train, by Rupeng Zhu, Dongping Sheng, Guanghu Jin, Fengxia Lu, Heyun Bao, Miaomiao Li.- A Novel Method to Improve the Resolution of Envelope Spectrum for Bearing Fault Diagnosis based on a Wireless Sensor Node, by Guojin Feng, Dong Zhen, Xiange Tian, Fengshou Gu, Andrew D. Ball.- Vibrational characteristics of a cracked rotor subjected to periodic auxiliary axial excitation, by Heba H. El-Mongy, Younes K. Younes, Mohamed S. El-Morsy.- Parametric Modeling of Main Excitation Sources on Board Vessels, by Christoph Tamm, Georg Stoll, Sven Herold.- Investigation of Motor Current Signature Analysis in Detecting Unbalanced Motor Windings of an Induction Motor with Sensorless Vector Control Drive, by M. Lane, D. Ashari, F. Gu, A.D. Ball.- Research on Multi-correlative Subsystems analysis for vibration source Identification, by S. M. Li, X. X. Jiang, C. W. Lim.- A Nut-type Ultrasonic Motor Driven with Single Phase Signal, by Zhuzi Chen, Yu Chen, Tieying Zhou, Deyong Fu.- Theoretical and experimental investigation into ‘Efficient Modal Control Strategies’ as applied on a plate structure, by Manu Sharma, S P Singh.- Smart Machines with Flexible Rotors, by Arthur W. Lees, Michael I. Friswell.- Vibration Localization of Rotationally Periodic Structures, by Arun Chandrashaker, Sondipon Adhikari.- Forward and Backward Whirling of a Rotor with GyroscopicEffect, by Ali Fellah Jahromi, Rama B. Bhat, Wen-Fang Xie.- Analysis of Nonlinear Dynamic Second-order Effect of a Large-scale Container Crane under Seismic Excitations, by Wang Dong, Wang Gongxian, Yeping Xiong, Hu Jiquan.- Predictive Coefficient Method for establishing similarity model of Jumbo container cranes, by Li Zhe, Wang Gongxian, Wang Dong, HuJiquan.- Stability and Bifurcation Analysis of an Axially Accelerating Beam, by Bamadev Sahoo, L.N. Panda, Goutam Pohit.- Analysis of indirect measurement of cutting forces turning metal cylindrical shells, by Kirill Kondratenko, Alexandre Gouskov, Mikhail Guskov, Philippe Lorong, Grigory Panovko.- Hybrid Permanent Magnet and Foil Bearing System for Complete Passive Levitation of Rotor, by Siddappa Iranna Bekinal, Tumkur Ramakrishna Rao Anil, Sadanand Subhas Kulkarni, and Soumendu Jana.- Amplitude Demodulation of Instantaneous Angular Speed for Fault Detection in Multistage Gearbox, by Sankar K. Roy, A. R. Mohanty, C. S. Kumar.- Experimental Grey Box Model Identification and Control of an Active Gas Bearing, by Lukas Roy Svane Theisen, Fabian G. Pierart, Henrik Niemann, Ilmar F. Santos, Mogens Blanke.- Monitoring of the damage in rolling element bearings, by Steven Chatterton, Pietro Borghesani, Paolo Pennacchi, Andrea Vania.- Effect of Structural Dynamics on the Shaft Line Rotor Response in Turbomachines, by E. Meli, G. Pallini, A. Rindi, F. Capanni, S. Rossin.- Nonstationary Processes Studying Based on “Caterpillar” - SSA Method, by Svetlana Polukoshko, Galina Hilkevica, Vladimirs Gonca.- Vibration measurements on PFBR fuel subassemblies, by P. Anup Kumar, R. Vidhyalakshmi, H.P. Agnihotri, Sudheer Patri, S. Chandramouli, V. Prakash and K.K. Rajan.- Multiple Fault Classification using Support Vector Machine in a Machinery Fault Simulator, by S. Fatima, A. R. Mohanty, V. N. A. Naikan.- A method for vibro-acoustic FE model updating of cavities using frequency response, by D. V. Nehete, S. V. Modak, K. Gupta.-Experimental and Numerical Study of Friction-induced Noise of Brake Pad Materials Having Grooved Surface, by X.C. Wang, J.L. Mo, D.W. Wang, H. Ouyang, J. Zhao, G.X. Chen, M.H. Zhu.- Neural Network Modeling of Submarine Shell, by Fei Wang, Yeping Xiong, Zhenping Weng.- Novel Approach for Structural Dynamics Topology Optimization based on Power Flow Mode Theory, by Yeping Xiong.- Accurate calculation of the phase shift angle of sinusoidal signals using trapezoidal rule, by Luis E. Monterrubio.- Effect of the Rail Support Stiffness on the Occurrence Propensity of Rail Corrugation Based on the Self-excited Vibration of a Wheel-Rail System, by G.X. Chen, W.J. Qian, J.L. Mo, M.H. Zhu.- Modeling and Dynamic Force Simulation for Detection of Profile Error in Spur Gear Pair, by Atul B. Andhare, Manish Kumar Verma.- Availability Improvement by Early Detection of Motor Bearing Failure using Comprehensive Condition Monitoring Techniques at DTPS, by Hemant M.Bari, Atul A. Deshpande, Suhas S. Patil.- Base isolator of vertical seismic vibration using a negative stiffness mechanism, by Yusuke Mochida, Naohiro Kida, Sinniah Ilanko.- A novel piezoelectric rotational speed meter, by Weiqing Huang, Meng-xin Sun, Jianhui Zhang, Qing-jun Ding, Yin Wang.- A new linear motor with two piezoelectric stacks based on differential friction effects, by Weiqing Huang, Xifu Chen, Jianhui Zhang.
