Advanced Materials Science and Technology II
Home > Mathematics and Science Textbooks > Science: general issues > Nanosciences > Advanced Materials Science and Technology II: (Volume 1123 Advanced Materials Research)
Advanced Materials Science and Technology II: (Volume 1123 Advanced Materials Research)

Advanced Materials Science and Technology II: (Volume 1123 Advanced Materials Research)

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Collection of selected, peer reviewed papers from the International Conference on Advanced Materials Science and Technology (ICAMST 2014), September 16-17, 2014, Solo, Indonesia. The 86 papers are grouped as follows: Chapter 1: Mathematical Theory and Numerical Methods; Chapter 2: Materials Synthesis and Properties Research; Chapter 3: Eco-Friendly and Biocompatible Materials; Chapter 4: Nanomaterials - Synthesis and Application; Chapter 5: Materials Manufacturing, Processing and Applications

Table of Contents:
Preface, Conference Organizers and Committees Chapter 1: Mathematical Theory and Numerical Methods Load Support Improvement on Superhydrophobic Surface in Lubricated-MEMS Using Numerical Investigation Application of Serpentine Flux Path Method into a Magnetorheological Valve by FEMM Simulation Fluctuation Theorem Application on 2-D Granular Materials Configurations Numerical Investigation of the Plastic Contact Deformation between Hemispheres: Variation of Radii Ratio and Normal Loads Optimization of Solvent System and Polymer Concentration for Synthesis of Polyvinyl Alcohol (PVA) Fiber Using Rotary Forcespinning Technique A Symbolic Computation of the Gravity Effect on the Electromagnetic Properties of Materials Numerical Solutions to Fast Transient Pipe Flow Problems Longitudinal Profiles of Atom Laser Propagation in a Cigar-Shaped Trap Performance Simulation on a Magnetorheological Valve Module Using Three Different Commercial Magnetorheological Fluid The Effect of a Hydrophobic Coating Material on Friction in a Micro-Slider Bearing: A Numerical Analysis Theoretical Studies of the Effects of Magnetic Field on the Phase Transition of Swollen Liquid Crystal Elastomers Investigation on the Elastic Modulus of Rubber-Like Materials by Straight Blade Indentation Using Numerical Analysis Chapter 2: Materials Synthesis and Properties Research Estimation of Van der Waals Interaction Using FTIR Spectroscopy Investigation on the Effect of B2O3 Additive on Microstructure and Magnetic Properties of Barium Hexaferrite Characterization of Main-Chain Liquid Crystal Elastomers by Using Differential Scanning Calorimetry (DSC) Method Transition Insulator-Metal and Antiferromagnetic-Paramagnetic Cu Doped in La0.47Ca0.53MnO3 The Effect of KOH Activation in Synthesis and Characterization of Zeolitic Imidazolate Frameworks-8 (ZIF-8) Templated Mesoporous Carbon The Effect of Low Vacuum Curing to Physical and Magnetic Properties of Bonded Magnet Pr-Fe-B The Effect of Powder Particle Size on the Structural and Magnetic Properties of Bonded NdFeB Magnet Poly(aniline-co-m-aminobenzoic acid): A Novel Ester Vapor Sensor and its Thin Film Deposition on Silane Functionalized SAM Glass Surface Preparation, Characterization and Catalytic Activity of Sulfated Zirconia by Varied Sol-Gel Method Synthesis of LiCoxMn2-xO4 by Low Temperature Solid-State Reaction for Cathode Material Texture Analysis of the Hot Rolling Austenitic Cr-Ni Steel Using Neutron Diffraction Method The Effect of Milling Time and Sintering Temperature on Synthesis of PbTiO3 by Mechanical Alloying Microstructure of AA7075 Based Composite by Accumulative Roll Bonding Process Aluminum-Carbon Metal Matrix Composites: Effect of Carbon Fiber and Aspect Ratio on the Mechanical Properties Crystalline Characterization and Dielectric Constant of Barium Strontium Titanates Prepared by Solid State Reaction Development of Geopolymer from Fly Ash and Metallurgical Slag Magneto-Conductance Effect of Natural Porphyrin Thin Films Fabricated by Spin Coated Method The Effect of Mixing Time on the Morphology and Mechanical Properties of Imperatacylindrica Cellulose Thermoelectric Properties Enhancement of NaCo2O4 through Ca Atom Partial Substitution on Na Atom Chapter 3: Eco-Friendly and Biocompatible Materials The Influence of Alkali Treatments on Tensile Strength and Surface Morphology of Cellulose Microfibrils The Effect of Glycerol and Oil Palm Empty Fruit Bunches Microcrystalline Cellulose Loading on Tensile Properties and Water Absorption of Cassava Starch Composite Benefeciation of Derived Bovine Bone Waste Hydroxyapatite Obtained from Meatballs Sellers and its Characterization Preliminary Study on the Biocompatibility of Stainless Steel 316L and UHMWPE Material A Bipolar Artificial Hip Joint Design for Contact Impingement Reduction Chitosan Membrane with Blending of Rice Hull Ash Silica and Polyethylene Glycol for Cu(II) Adsorption in Aqueous Solution Synthesis of Biodegradable Plastic Films from Oil Palm Empty Fruit Bunch Cellulose The Influence of Heat and Two Stages Precipitation in the Process of Natural Polymer Purification from the Byproduct of Bioethanol Process Base on Empty Palm Fruit Bunch Preparation of Chitosan-Alginate/PES Pervaporation Membranes for Bioethanol Dehydration The Influence of Adding Bio Inhibitor Sarang Semut (Myrmecodia pendans) to Carbon Steel API 5L Grade B in Solution of HCl 1 M The Effect of Sandblasting and Electropolishing on the Surface Roughness and Corrosion Rate of AISI 316L Stainless Steel The Effect of the Wall Thickness on Wear of an UHMWPE Acetabular Liner Sputtering of Titanium in Co-Cr-Mo Alloys for Orthopedic Implant Materials Comparison between Conventional and Ultrasonic Preparation of Chitosan from Shrimp Shells Waste Synthesis of Isopropyl Esters from Jatropha Curcas Oil at Short Time Reaction Effect of Acidic and Basic Environment to the Degradation Behavior of PLGA Nanocapsules for Biomedical Application Chapter 4: Nanomaterials - Synthesis and Application Evolution of ZnO Nanoflower-Like Structure Formation and Growth during Synthesis and Paste Preparation Study on Morphology of Electrospun SiOC Fibers The Influence of ZnO Components on the Photocatalytic Activity of Fe3O4-CuO-ZnO Nanocomposites Synthesis of Sulfur-Doped Carbon Dots by Simple Heating Method Fabrication of PVA Fibers Loaded with Fe3O4 Nano Particles Using Electrospinner Physical Properties and Photocatalytic Activity of Fe- and Co-Doped ZnO Nanoparticles Synthesized via Surfactant Modified Co-Precipitation Fabrication of Carbon Nanomaterial Using Arc-Discharge in Liquid Method for Battery Application Synthesis and Fabrication of Nanoparticle-Based Thin Layer of Natural Porphyrin Effect of Temperature on Silver Nanorods Synthesized by Polyol Method Influence of Grain Size to Resistivity Relaxation of La0.7Sr0.3MnO3 Nanoparticles Photocatalytic Decolorization of Malachite Green in the Presence of Fe3O4/TiO2/CuO Nanocomposites Synthesis and Characterization of Al2O3 Nanoparticles and Water-Al2O3 Nanofluids for Nuclear Reactor Coolant Effect of the Concentration of Zinc Oxide Nano Fluid for Enhancing the Performance of Stirling Engine Fabrication of Poly(acrylonitrile)/PAN Nanofiber Using a Drum Collector Electrospinning System for Water Purification Application Photocatalytic Degradation of Methylene Blue Using TiO2/Carbon Nanoparticles Fabricated by Electrical Arc Discharge in Liquid Medium Transition Metal (Ni, Cr)-Doped ZnO Assisted CTAB Performance on Decolorization of Organic Dyes Photocatalytic Degradation of Methylene Blue and Methyl Orange with Fe-Doped ZnO Nanoparticles Modified with Natural Zeolite and Montmorillonite: Comparative Study Thermal Characterization of Bacterial Cellulose/Polyvinyl Alcohol Nanocomposite Effect of Catalyst Preparation Method on the Characteristics of Carbon Nanospheres as Anode Materials of Lithium Secondary Batteries In Vitro Release Characteristics of Hydrophobic Breast Cancer Drug Loaded Poly Lactic-co-Glycolic Acid (PLGA) Nanoparticles Montmorillonite Incorporated in Cr Doped ZnO Nanoparticles for Degradation of Organic Dyes in Water under UV Light Irradiation Chapter 5: Materials Manufacturing, Processing and Applications Co-Sensitization Promoted Light Harvesting Capability of Dye-Sensitized Solar Cell (DSSC) Using Anthocyanin-Based Dye The Effect of Addition of Indigenous Silica Powder from Lampung on the Concrete Performance after 1 Year Curing Time Utilization of Fly Ash for a Support Layer of Pervaporation Membrane The Effect of Sokka Clay on the Tensile and Burning Properties of rPP/Clay Composite Hot and Cold of Pressing Effect on ECAP-Parallel Channel Composite Based on Al/ANF Material Reducing Energy Consumption through Innovative Glass Layering Construction with Polyethylene Bubble Wrap at 2nd Floor Dean Faculty Room Effect of Drying Time on Mechanical Properties of Natural Rubber Products Filled with Modified Kaolin Prepared from Latex Dipping High Temperature Oxidation of the Hot Rolled ZrNbMoGe Alloy for Fuel Cladding Material of Pressurized Water Reactor Sensitivity Improvement of Conducting Polymer Based Sensor to Vehicle Emission Gas by Using Imprinting Method Highly Oriented ZnO:Al Thin Films as an Alternative Transparent Conducting Oxide (TCO) for Windows Layer of Solar Cells Physical and Chemical Modification of Sorghum Flour for the Potential Substitute of Wheat Flour Potential Implementation of Electronic Waste Based Magnetite Powder for Magnetorheological Elastomers Shellac Coated Hydroxyapatite (HA) Scaffold for Increasing Compression Strength Use of Natural Silica Sand as a Component for Prospective Fuel Cell Sealing Materials Effect of Aging on Mechanical Properties of Natural Rubber Latex Products Filled with Alkanolamide-Modified Cassava Peel Waste Powder (CPWP) Apparent Activation Energy in High Frequency Microwave Sintering of Alumina Ceramic Heating Time Dependent Pore Size of Porous Composite from Waste Glass Identification of Carbon Dots in Waste Cooking Oil


Best Sellers


Product Details
  • ISBN-13: 9783038355618
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 430
  • Spine Width: 22 mm
  • Width: 170 mm
  • ISBN-10: 3038355615
  • Publisher Date: 26 Sep 2015
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 1123 Advanced Materials Research
  • Weight: 900 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advanced Materials Science and Technology II: (Volume 1123 Advanced Materials Research)
Trans Tech Publications Ltd -
Advanced Materials Science and Technology II: (Volume 1123 Advanced Materials Research)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advanced Materials Science and Technology II: (Volume 1123 Advanced Materials Research)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!