Applied Energy and Environment Technologies and Materials
Home > Science, Technology & Agriculture > Technology: general issues > Engineering: general > Applied Energy and Environment Technologies and Materials: (Volume 737 Applied Mechanics and Materials)
Applied Energy and Environment Technologies and Materials: (Volume 737 Applied Mechanics and Materials)

Applied Energy and Environment Technologies and Materials: (Volume 737 Applied Mechanics and Materials)

|
     0     
5
4
3
2
1




Out of Stock


Notify me when this book is in stock
About the Book

Collection of selected, peer reviewed papers from the 2014 International Forum on Applied Energy and Environment (IFAEE 2014), November 28-29, 2014, Shenzhen, China. The 191 papers are grouped as follows: Chapter 1: Development and Utilization of Solar Energy, Biomass Energy, Wind Energy and other New Energies; Chapter 2: Energy Materials, Energy Chemical Engineering, Fuel Cells and Management, New Energy Vehicles and Electric Vehicles; Chapter 3: Green Building Materials, Ecological Buildings, Energy-Saving Buildings and Architectural Environment Analysis; Chapter 4: Power System and Automation; Chapter 5: High Voltage and Insulation Technology, and Power System Management; Chapter 6: Engineering Thermal Physics and Applied Thermal Engineering; Chapter 7: Environmental Chemistry, Biology and Materials, Biomedical Meterials; Chapter 8: Environmental Safety and Health, Disaster Prevention and Mitigation; Chapter 9: Environmental Analysis, Monitoring and Protection; Chapter 10: Pollution Control Project (Air, Water, Solid); Chapter 11: Waste Disposal and Recycling; Chapter 12: Water Supply and Drainage; Chapter 13: Hydrology and Water Resources Engineering; Chapter 14: Soil and Water Conservation and Desertification Control; Chapter 15: Mineral, Oil and Gas Resources: Prospecting, Exploration, Mining and Process Engineering, Geoengineering Applications; Chapter 16: Urban and Regional Planning, and Sustainable Development; Chapter 17: Energy-Saving, Low-Carbon, Eco-Economy, Circular Economy, Environmental Protection and Economic Development

Table of Contents:
Preface and Conference Organization Chapter 1: Development and Utilization of Solar Energy, Biomass Energy, Wind Energy and other New Energies The Analysis of Evolution Characteristic for Maximum Wind Speed in the Hexi Corridor A Two-Stage Combination Model for Wind Power Forecasting Analysis of Corn Straw Pyrolysis Bio-Oil Composition Influence of Solar Panels in Distributed Photovoltaic Power Generating System above Farm Land on Field and Crops Influences of Environmental Factors on the Maximum Power Point of Photovoltaic Cells Large-Scale Automatic New Energy Resources System Controlling Temperature and Pressure New Process for Etherification of Glycerol with Isobutene Numerical Simulation and Experimental Research on Higher Heating Value Biomass Gas Gasifier Optical Losses through Gaps of CPCs with One-Sided Flat Absorber Performance Analysis of Diesel Engine Using Bio Ethanol (Water Hyacinth) by Response Surface Methodology (RSM) Research of Characteristics Biomass Staged-Gasification for Hydrogen-Rich Syngas Research on the Correlation between Biodiesel's Composition and Physical & Chemical Properties Theory of Solar Hot Water System Construction Application Engineering Evaluation Field Test Method - The Amount of Solar Irradiance Intercept Method Wind Power Prediction Model Based on Wavelet Neural Network under Missing Data Chapter 2: Energy Materials, Energy Chemical Engineering, Fuel Cells and Management, New Energy Vehicles and Electric Vehicles A Analysis on the Importance of Lithium Battery Cooling for Pure Electric Vehicles Based on Graphene Electrodes PbSe / CdSe Core-Shell Quantum Dots Battery Hydrothermal Upgrading of Bitumen with Glucose as Hydrogen Donor Optimization of Catholyte in Hydrogen Redox Fuel Cell Potential Energy Curves and Spectroscopic Properties of C-2 Studied by Configuration Interaction Method Reduced Thermal Conductivity in ZrNiSn-Based Heusler Alloys Research on Electric Vehicle to Household Electricity Interactive Mode Considering Photovoltaic Power Generation Solar Cells of the Inorganic Materials based on PbSe/CdSe Core/Shell Nanocrystals The Development Status and Trends of Air Conditioning on New Energy Vehicles TLC-FID and GC-MS Analysis of Tars Generated by Oil Sand Pyrolysis at Different Temperature Crude Oil Price and Fuel Ethanol Firm Profit Chapter 3: Green Building Materials, Ecological Buildings, Energy-Saving Buildings and Architectural Environment Analysis Analysis of Energy Saving Design of Solar Building - Take Tongji University Solar Decathlon Works for Example Construction Energy Conservation Domain Carbon Transaction Mechanism Economic Efficiency Research Curing Behavior for Microencapsulated Curing Agents on Epoxy Resin Systems Energy Retrofit of Historical Buildings Based on Windowed Elements Energy System Feasibility of a High Efficient Building Extraction of Forms and Materials from Typical Hakkas Circular Earth Building and Researches Nn the Pattern Language of Hakkas Landscape Field Study on Human Thermal Adaptation in Summer of Tibetan Dwellings in Kangding, China Influence of Shading and Transparent Surfaces on Historical Building Energy Retrofit Chapter 4: Power System and Automation Service Restoration of Smart Distribution System A Novel Island Partitioning Strategy of Multi-Microgrids Based on Voltage Stability Margin A Novel Power Quality Disturbances Detection and Classification Method Analysis of Grid Code Technical Requirements for Wind Farms Connected to the Grid in Penghu Island Evaluation of Restoration Sequence of DG in Black-Start Research on Information Security Test Bed and Evaluation Framework for Distribution Automation System Study on the Terminal Testing Method of Distribution Automation System The Analysis on the Effect of Speed Regulating System on Low Frequency Oscillation Support Vector Machine Based Method of Earthed Fault Location in Neutral Un-Effectual Grounded Power System Chapter 5: High Voltage and Insulation Technology, and Power System Management DC MOA Application and Test Technical Analysis Bandwidth Prediction for Shared Risk p-Cycles in Power System Developed of High Voltage Bushing with New Shielding Technology for High Voltage Switch Cabinet Investigation of Cable Partial Discharge Characteristics Based on Weibull Distribution Research of Partial Discharge Classification Method Based on the Phase Distribution of XLPE Cables Study of Nanjing Demand Side Management Based on Cost-Benefit Analysis - Take Green Lighting as an Example Study on the Safety and Quality Management Innovation of Power Transmission and Transformation Projects in Jiangsu Province Transmission Network Planning Based on Genetic Algorithm in Market Environment A Combined Model Based on Cuckoo Search Algorithm for Electrical Load Forecasting Chapter 6: Engineering Thermal Physics and Applied Thermal Engineering EDI Technology Application and Exploration in the Power Plant Boiler Feed Water Preparation Areas Flash Boiling Spray Simulation Based on Void Fraction and Superheat Controlling Heat Recovery and Burner Modification of an Industrial Tubular Furnace Natural Convection of Nanofluids in Enclosures Heated Laterally and Underneath Predictive Models for Evaluating Mobility Buses Thermal Performance Chapter 7: Environmental Chemistry, Biology and Materials, Biomedical Meterials Degradation of Paracetamol by Fenton-Like Process in Conjunction with Sonication Effects of Nitrogen Amount on Yield and Nutrient Absorption of Cold Land Japonica Rice under the Condition of Straw Returning Anti-Fatigue and Anti-Hypoxia Effects of Soy Isoflavones Bio-Hydrogen Production through Anaerobic Microorganism Fermentation from Molasses Wastewater in a Continuous Stirred Tank Reactor Chromosome and Karyotype Analysis of Hibiscus syriacus Effect of Salinity on the Growth of Clam Identification and Photodegradation of Red Pigment from Serratia marcesce zl3 Study on the Predominant Bacteria from Storage of Liquid-Smoked Tilapia The Effect of Biofloc Technology on Nursery System of Litopenaeus vannamei The Effects of Aquatic Plant Vallisneria Natans on the Distribution of Metals under Different Hydrodynamic Conditions Transfer Characteristics of Cd in Paddy Soil-Rice System under Field Condition Screening and Control Effects of Antagonistic Bacteria against Tobacco Black Shank Disease Study on Process of Xylanase by Fed-Batch Fermentation Understanding of Water Sorption Mechanism in Cellulose-Water System: The Perspective of NMR Chapter 8: Environmental Safety and Health, Disaster Prevention and Mitigation A Brief Analysis of the Airport Depot Employees’ Safety Education Advanced Technologies Abroad are Used to Improve Highway Construction Safety Formation Mechanism and Evolution Process of Typical Landslide in Eastern Menyuan Basin Frost Damage Mechanism Analysis and Preventive Measures of Bridge Numerical Simulation of Dispersion of Radionuclides Released from the Fukushima NPP and the Assessment of their Nuclear Impact Optimization of Height Prediction of Water Fractured Zone Based on ANN Quantitative Study for Drilling Process on Human Factor Risk Mitigation Capacity Risk Analysis of Ecological Environment Healthy Stability Analysis and Treatment Study on Reservoir Bank Collapse Area The Research of Accident Emergency Ability Evaluation of Construction Enterprise The Research of Highway Construction Safety Management Based on Fuzzy Evaluation The Research on Loose Body Landslide Stability and Treatment Analysis of Mining Subsidence Disasters in Loess Gully Areas and its Control Countermeasures Evaluation of Personnel Underground Behavior Safety for Metal Mines Based on Grey Relevance Analysis Chapter 9: Environmental Analysis, Monitoring and Protection Distribution Characteristics of Soil Organic Carbon in Estuarine Wetland of Qingdao Dagu River Isolation and Identification of a Heterotrophic Nitrifying Bacteria and Study on Removal of Nitrite Nitrogen A Mercury Free Method for the Determination of Chemical Oxygen Demand of the Sample with High Salinity and Organic Macromolecule Applying AQUATOX to Simulate the Response of Eutrophic State to Nutrient Input in Yincun Port River Effects of Toxicants on a Non-Autonomous Predator-Prey Model with Random Perturbation PM2.5 Pollution Level of Heavy Metals in Atmospheric Particles in Taiyuan Pollution Characteristic of VOCs during Straw Burning Period in Chengdu, China Pollution Status and Trend Analysis of the Main Atmospheric Pollutants in Five National Central Cities in China Spatial Distribution and Sources of Heavy Metal Pollution of Surface Dust in Taiyuan, China Study on High Efficient Snow-Dissolving Agent with Coloration Function The Indoor Radon Concentration Measurement and Analysis in a University and its Adjacent Areas Chapter 10: Pollution Control Project (Air, Water, Solid) Styrene Removal from Polluted Air in Biotrickling Filter with Pyrocarbon-Sawdust and Ceramic-Raschig-Rings-Sawdust Packings Adsorption of Phosphate on Mg/Fe Layered Double Hydroxides with Different Anions Intercalation Advances in the Application of the Low Temperature Plasma Technology in Wastewater Treatment Biogenic Jarosite: A Friendly Adsorbent for the Removal of Chromate from Aqueous Solution Chlorate Removal by Calcined Mg/Fe/Ce Layered Double Hydroxides Effect of Soil Water Content on the Removal of Volatile Chlorinated Hydrocarbons from Soil by Mechanical Soil Aeration Enhancement the Enzymatic Activity of Phenol-Degrading Microbes Immobilized on Agricultural Residues during the Biodegradation of Phenol in Petrochemical Wastewater Performance of Treating Domestic Sewage with Coagulation-Ultrafiltration System Removal of Toluene by Dielectric Barrier Discharge Combined with Modified Photocatalyst Research on Microbial Pollution of Low Concentration Organic Acids Reclaimed Water during Storage Research Progress of Pollution Control for Mercury in the Flue Gas from the Coal-Fired Industrial Boilers Reviews of Generator Stator Cooling Water Treatment Technology Sewage Treatment Performance of Biological Aerated Filters with Fe-Containing Compound Clinoptilolite Media Study of NOx Inhibition Technology Based on Water-Gas Reaction Study of Screening Reverse Osmosis Menmbrane Anti-Scaltants by Drainage Gradient Method Study on Environmental Dyeing Technology Study on the Control of Industrial Dust from Alumina Production Process Techniques of Building Monolithic Moving that Avoiding Building Rubbish The Design of Exhaust Gas Cooler for Diesel Particulate Bag Filter The Mercury Emission of Flue Gas from Cement Kiln Control Technology Research The Use of Filtration Theory for Performance Optimization of Volume Thermodynamic Studies for Adsorption of Cd2+ and Pb2+ from Waster Water on Modified Walnut Shell Uptake of Trace Metals by Imperata Cylindrical in Pot Experiments with Mafic Tailings and its Significance for Phytoremediation Chapter 11: Waste Disposal and Recycling A Research on the Efficiency of Hydrolysis-AICS in Sewage Treatment Plant in North-Cities Fabrication and Characterization of Ce-Doped Gd2Zr2O7 Ceramics as Simulated Waste Forms for Treating Pu Selective and Multi-Step Leaching of Valuable Metals from Scrap Copper-Smelting Sludge Study of Lipids Composition in the Rice Straw Study on Treatment of Wastewater with High-Concentration Sulfate by IC Anaerobic Reactor The Pollution Status and Remediation Techniques for the Contaminated Soils in Mine Chapter 12: Water Supply and Drainage Application of Reverse Osmosis Membrane in Wastewater Treatmente Application Present Status of Supercritical Water Oxidation Technology in Industrial Wastewater Treatment Risk Analysis in Water Management Rural Drinking Water Disinfection Technology and Research Progress of Application River Water Quality Risk Assessment Using Grey Correlation in Baoji Weihe River of China Chapter 13: Hydrology and Water Resources Engineering Research and Application of Water Resources Optimized Distribution Model in Inter-Basin Water Transfer Project A Web-Based Groundwater Management Information System Analysis on the Technological Advantages of Domestic Seawater Application of MapGIS in Groundwater Solute Transport of Power Plants Demand Analysis and Technical Framework of Water Ecological Civilization Construction in Shandong Province Experimental Testing for Evaluating the Influence of Substrate Thickness on the Sub-Surface Runoff of a Green Roof Monthly Runoff Probabilistic Forecast Model Based on Similar Process Derivations Research on Connected Water Body Self-Purification Capacity Simulation and Effect Analysis Study on High Efficiency Technology of Industrial Circulating Water in Yellow River Estuary Area Sustainable Development Evaluation of the Baotou Water Resource Based on Entropy Method The Impacts of Different Land Use Patterns on Water Volume in the Xixian Watershed, China Water Resources Compensation Policy and Application on Differential Empowerment System An Analysis and Comparison of Areal Precipitation Estimation Chapter 14: Soil and Water Conservation and Desertification Control A Comparative Study on Magnetic Susceptibility of Cinnamon Soil and Brown Soil in Pingyi County, Shandong Province, China Green Roofs in the Mediterranean Area: Interaction between Native Plant Species and Sub-Surface Runoff Impact of Bi ̊Char on Water Characteristics of a Chinese Severe Saline Agricultural Soil Incipient Motion Experiment of Sediment in Silty-Sand Coast The Impacts of Land-Use Change Patterns on Soil Erosion in the Xixian Basin, China Underground Runoff Product Flow of Red Loam under Rainfall Simulation Research of Crop Water-Saving Irrigation Optimization Annual Analysis of Erosion Situation of Hearth in 1000m3 Blast Furnace Chapter 15: Mineral, Oil and Gas Resources: Prospecting, Exploration, Mining and Process Engineering, Geoengineering Applications Difficulties and Countermeasures Research on Development of Marine Carbonate Gas Reservoir - Taking Sichuan Basin for Example Research on CO2 Corrosion Rate Prediction of Gathering Pipelines Considering the Effect of Oil A Comparative Analysis between Coal-Bed Methane and Shale Gas in China Based on Cases Alberta Management of Mineral Resources and its Reference to China Analysis of the Physical Characteristics of Coal Reservoir in Hancheng Mining Area, Ordos Basin, China Application of Stratal Slicing in Sandbody Interpretation of the Channel Beneficiation Experiment Study on Iron Ore in Yunnan Province Development Law and Watery Features of Collapse Column in Pansan Mine Dissolution Phenomenon of Laumontite in the Carboniferous Volcanic Oil and Gas Reservoirs of Santanghu Basin in Xinjiang Division Features of Coal-Bearing Tectonic Units in North China Indicator Elements Combination’s Characteristic and Genesis of Four Types of Uranium Mineralization in China Productivity Prediction Method of Shale Reservoir Based on Logging Data - A Block of Songliao Basin as an Example Recovery Copper from a Complex Copper Sulfide Ore of Yunnan by Using Flotation Research on the Assessment on the Risk System Regarding Offshore Oil and Gas Field Development Projects Based on the Grey System Theory Research on Upper Limit Increased of Mining in Coal Mining Face Simulating Experiment of Casing Cementing with Pre-Expansion Synthetic Informational Prospecting Model of Gold Placer in the Northwest of Heilongjiang Province The Characteristic of Oil and Gas Accumulation and Main Factors of Reservoir Enrichment in SZ36-1 Region The In Situ Stress Measurement Technology Research of Km Deep Well and Support Effect Evaluation The Numerical Simulation Research on the Groundwater Environmental Impact of Coal Mining in Complex Boundary Conditions The Progress of Mineral Processing Technology of Lead-Zinc Mine in China Research and Application for Fire Flood New Technologies in Liaohe Oilfield Chapter 16: Urban and Regional Planning, and Sustainable Development A Sustainable and Integrated Approach to Urban Regeneration: Tools and Procedures for a Complex Area in London Fostering the Planning and Implantation of Innovation Habitats by the Knowledge Based Urban Development Approach (Fostering the Planning of EI by the KBUD Approach) Layout Optimizing of Public Bicycle Stations Based on AHP in Wuhan Mediterranean re-Urban Planning Sociological Methods for Sustainable Urban Design Characteristics of Land Surface Temperture (LST) within the Third Ring Road of Shenyang Objectification of Modeling the Development of Brownfields in an MDM Environment Chapter 17: Energy-Saving, Low-Carbon, Eco-Economy, Circular Economy, Environmental Protection and Economic Development Influencing Factors Decomposition of the Carbon Emission of Industrial Energy Consumption in Nanning Downtown Based on LMDI Analysis of Carbon Emission Reduction Potential by Clean Coal Technology in China Analysis on the Relation of Water Environment and Economic Development Dynamic Simulation Research on the Economic and Environmental Impact of Beijing’s Reclaimed Water Utilization Policy Improvement for Ecological Management in China's Industrial Park Probe into the Strategies of Regional Energy-Saving and Emission-Reduction Based on the Energy Consumption Structure Evolution Research on Energy Efficiency Status of Fans in Zhejiang Province Structure of Industry Chain of Circular Economy of Chongxin Ecological County, Gansu Province Study of Eco-Industrial Park Concept and Connotation The Industrial Structure Adjustment and Environmental Improvement - From the Case of Suzhou River Change The New Orientation of Discharge Permit System in the Environmental Management System Analysis on Coupling Relations between Industrialization and Ecological Environmental in Inner Mongolia


Best Sellers


Product Details
  • ISBN-13: 9783038354017
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1028
  • Spine Width: 51 mm
  • Width: 170 mm
  • ISBN-10: 3038354015
  • Publisher Date: 16 Apr 2015
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 737 Applied Mechanics and Materials
  • Weight: 1800 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Applied Energy and Environment Technologies and Materials: (Volume 737 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Applied Energy and Environment Technologies and Materials: (Volume 737 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Applied Energy and Environment Technologies and Materials: (Volume 737 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals

    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!