Advances in Energy Materials and Environment Engineering
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Mathematics and Science Textbooks > Physics > Applied physics > Advances in Energy Materials and Environment Engineering: (Volume 700 Applied Mechanics and Materials)
Advances in Energy Materials and Environment Engineering: (Volume 700 Applied Mechanics and Materials)

Advances in Energy Materials and Environment Engineering: (Volume 700 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from the 2014 International Conference on Energy Materials and Environment Engineering (ICEMEE 2014), October 25-26, 2014, Guangzhou, China. The 142 papers are grouped as follows: Chapter 1: Engineering Decisions in Area of Renewable Energy; Chapter 2: Engineering Decisions in Area of Traditional Power Engineering; Chapter 3: Energy Materials and Technology; Chapter 4: Energy-Saving Technology; Chapter 5: Materials and Technologies of Environmental Engineering, Development and Protection of Bioresources; Chapter 6: Waste Disposal and Pollution Control Project; Chapter 7: Water Supply and Water Resource Engineering; Chapter 8: Mining and Mineral Processing; Chapter 9: Exploration and Mining of Oil and Gas Resources; Chapter 10: Machines and Equipments for Energy and Resource Processing; Chapter 11: Theory and Practice of Sustainable Development

Table of Contents:
Preface and Conference Organization Chapter 1: Engineering Decisions in Area of Renewable Energy Biomass Molding Technology and the Research State of Biomass Binder Comparative Study of Various Models to Estimate Hourly Solar Irradiance: Application for Performance Analysis of a Renewable Energy DC-Micro Grid Design of Single Axis Tracking Solar Photovoltaic Tracking System Development of Software for Analyzing of Solar Irradiance and Sizing of Stand-Alone PV Power Systems Development of Software of Climate Analysis for Generation the Energy with Wind Turbine Multiobjective Evolutionary Algorithms MOEA to Solve Task Allocation Problems in Multiagent Systems for DC MicroGrid Passive Control for a 2D Wind Turbine Blade with a Locally Flexible Structure at Low Reynolds Number Research on the Single Phase Grid-Connected Inverter System of Small Wind Power Study on Solar Energy for Pre-Cooling Technology of Fruit and Vegetable Study on the Liquefaction Technology of Corn Stalk-Biomass Materials Wind Farm Collector System Research Wind Turbine Failure Rate Calculation Method Considering Multi-Factor Influences Chapter 2: Engineering Decisions in Area of Traditional Power Engineering A New Fuzzy Petri Net Model for Power Grid Fault Diagnosis Analysis of 50Hz Electric Fields Generated by Multi-Circuit Transmission Lines on the Same Tower Application of Grey Relation Analysis Method in Component-Based Load Modeling Disaster Resistance and Emergency Evaluation of Urban Power Grid Research on Distribution Transformer Condition Assessment Method Based on Core State Variable Set Research on the Impact of Power Grid Harmonic on Energy Meter and its Solution Methods Study on the Lightning Current Amplitude Distribution in Shenzhen Power Grid Time-Frequency Analysis Method in the Transient Power Quality Disturbance Analysis Application Overview of Impacts of Distribution Generations and Micro Grids on Active Distribution Network Operation Chapter 3: Energy Materials and Technology A Study on the Luminescent Properties and Energy Transfer of Na2BaMgP2O8:Tb3+, Eu3+ Phosphor Corrosion Behavior of Conducting Polymer PANI in Simulating PEMFC Conditions Effects of Sb or Ba Addition on the Piezoelectric Properties of PZT Preparation of Carbon Monoliths by a Simple Polymer Blend Technique Preparation of PNN-PZT Ceramics and Piezoelectric Characteristics Study of Substrate for the Zinc Electrode in Acid Zn-PbO2 Flow Battery Template-Free Hydrothermal Synthesis of Octahedral Fe3O4 Microcrystals and its Magnetic Property The Research on the (1-x) PZT-x PMN Piezoelectric Materials Study of the Affecting Factors on the Desulfurization Activities of Co-Doped TiO2 Photocatalyst Synthese, Crystal Structure of O-P-O Bridged MnIII(Schiff Base) Phosphinate Complexe Development of Manufacturing CIGS Thin Film Solar Cells Deposited on Polyimide Improved Power Performance of Activated Carbon Anode by Fe2O3 Addition in Microbial Fuel Cells Thermoeconomic Optimization for a Ferroelectric Stirling Refrigeration-Cycle Chapter 4: Energy-Saving Technology Comparison and Analysis of ONU Sleep Mechanism Based on OPNET for Green Fiber-Wireless Access Network Research of Energy Saving about Water Treatment by Microbubble Flotation Research on Application of Air Source Heat Pump Hot Water System in Energy Saving Building Study on Dual-Energy Storage System Design for Pure Electric Vehicle Total Factor Energy Productivity and Efficiency in the Yangtze Delta Region: An Application of DEA-Malmquist Index Chapter 5: Materials and Technologies of Environmental Engineering, Development and Protection of Bioresources Multifractal Characteristics of Soil Particle Size Distribution under Sewage Irrigation in Different Irrigation Years A Comparative Study on the Removal of 2,2',4,4'-Tetrabrominated Diphenyl Ether (BDE-47) by Four Different Methods Adsorption of Humic Acid from Aqueous Solution Using Composite Magnetic Microspheres of Chitosan and Quaternary Ammonium Chitosan Derivative Analysis of the Characteristics of Low NOx Combustion Using Exhaust Gas Recirculation Dissolution of 238U from Low-Level Contaminated Soil by Acidithiobacillus Ferrooxidans Removal of Zinc Ions from Aqueous Solutions by Micro-Electrolysis and Iron Hydroxide Self-Flocculation Soil Enzyme Activities of Wetland in Liangzi Lake Solutions for Extracting Air and Smoke in Underground Subway Station Study on Separation/Enrichment of Trace Zinc Using Ternary Association Complex System The Mechanism Research of Host Resistance Enhanced by the Composite Mycorrhizal Fungi under Water Stress Treatment of Chlorobenzene-Contaminated Gas Stream in a Biotrickling Filter Inoculated with Ralstonnia pickettii L2 Process Optimization of High Oil Absorption Resins by Suspended Emulsion Polymerization and their Properties Enhanced Activity of Fe-Doped Cu/H-Sep for the SCR of NO with Propylene in the Presence of Oxygen Preparation and Properties of Regenerated Sisal Cellulose from a Homogeneous Solution Effect of Vinasse Application on Soil in Sugarcane Fields Effects of a Solid Waste Containing Cr(VI) Detoxified with Biomass on the Germination of Seeds Effect of Activated Carbon Fiber Properties on Ca2+ Removal by Capacitive Deionization Synthesis and Characterization of Non-Surfactant Mesoporous Chitosan/Silica Composite Sorbent and its Purification of Sugarcane Juice Bioresources Preparation of Alumina Microfiltration Membrane with Different Titanium Oxide Content Selection and Application of Hydrogen Peroxide Bleaching Auxiliary for Wine Corks The Adsorption Performance of Hybrid PVDF Membrane by HA Study on Non-Selective Photocatalytic Degradation of Organic Dyes in Presence of Hollow CdS Nanospheres Difference of Morphological Structure and Characteristics of Physiology and Biochemistry between Two Types of Alfalfa Callus An Ultrasonic Pulse Velocity Test on Fly-Ash Based Geopolymer Concrete in Frequency Domains The Effects of N and P Addition on the Soil Properties of a Eucalyptus urophylla Stand Interactions between Soil Water and Fertilizer Application on Fine Root Biomass Yield and Morphology of Catalpa bungei Seedlings Effect of Heavy Metals Cu and Zn in Typical Farmland Soil on Enzyme Activity and Microbial Biomass in a Local Area of Eastern China A Study on the Distribution of Net-Phytoplankton and Nutrients [N, P] of Xiangshan Bay in Summer Ecotoxicological Assessment of Soils Formed by Weathering of Igneous Rocks of Teschenite-Picrite Association (Beskydy Mountains, Czech Republic) Research on Vegetation Phenological Change Based upon NDVI in Qinling Area Sulphation of Topsoil in Hehua Village, Zhijin County, Guizhou Province The Model of the Korla Fragrant Pear Mature Based on Effective Accumulated Temperature Vertical Distribution and Pollution Assessment of Heavy Metals in Sugarcane Soils by Using Sugarcane Vinasse Sensitivity of Reference Crop Evapotranspiration in Shaanxi Province The Groundwater Pollution Disaster Assessment of Feicheng Basin Acute Toxicity Experiments on Local Fishes in Liao River of China The Vegetation Remote Sensing Phenology of Qinling Mountains Based on the NDVI and the Response of Temperature to it Development and Prospect of Microbial Oils Chapter 6: Waste Disposal and Pollution Control Project The Compressive Strength of Flemish Bond Wall by Exploiting Spent Copper Slag from Shipyard Waste A New Water Pollution Hierarchical Governance Policy for Liaohe River A System Dynamics-Based Scenario Analysis of CO2 Emission Peak and Emission Reduction Paths – A Case Study of Chongqing’s Cement Industry Advanced Treatment of Coking Wastewater by Electro-Coagulation An Analysis of Simulation System of CO2 Emission and Emission Reduction Paths in Chongqing’s Electric Power Industry Association Study on Air Pollution and Cardiopulmonary Function of Primary and Secondary School Students Content of Heal Metals in Incinerated Municipal Solid Waste at Kaohsiung City, Taiwan Design and Implementation of Chemical Wastewater pH Control System Intelligent Reform of Activated Sludge Sewage Treatment Control System Kinetic Analysis for COD Removal in Actual Coking Wastewater through an Micro-Aerobic EGSB Reactor Mercury Removal from Flue Gas with Fe-Doped Titania Photocatalyst Research on New Pervaporation Membranes and the Effect of Treatment of Wastewater Containing Phenol Research on Treatment of Leaded Wastewater by Process Combined Fe/C Micro-Electrolysis with Microbial Adsorbent-Flocculant Risk Assessment of Heavy Metals Pollution for Rosa sterilis and Soil from Planting Bases Located in Karst Areas of Guizhou Province Study on Eu Doped ZnO Photocatalytic Degradation of Pharmaceutical Wastewater Study on the Incineration Experiment to Dispose Ptreis vittata L. Chapter 7: Water Supply and Water Resource Engineering Risk Assessment Study for a Floating, Production, Storage and Offloading Vessel (FPSO) in Deep Waters Applications of Variable Fuzzy Set Theory and GIS for Water Resources Vulnerability Assessment of Yellow River Delta Characteristics Identification of Runoff and Sediment Flux Based on Wavelet Analysis Approach in Lower Yellow River Current Status and Development of Chinese Seawater Desalination Technology Investigation of Dissolved Organic Matter after Oxidant Flushing of Simulated Raw Water Distribution System Microbial Community Analysis of Underground Drinking Water Using Denaturing Gradient Gel Electrophoresis and Flow Cytometry Technologies Optimizing Pretreatment Methods and Application for Analysis of Geosmin and 2-Methylisobomeol in Drinking Water The Study of Reclaimed Water and Rainwater Utilization Mode of Rural Rainwater Utilization Urban Water Conservancy Project Based on Engineering Construction Combined with Ecological Environment Model for Evaluation of Water Quality Base on Improved Wavelet Neural Network The Trihalomethanes Formation Potential in Treated Waters Exposed to Ozone and Chlorine Chapter 8: Mining and Mineral Processing An Anomaly Identification Method of Coal Gas Pre-Drainage Parameters Based on T2 Control Chart Study and Application of Hydraulic Fracturing Technology to Increase Permeability in Soft and Low Permeability Coal Seam The Study on Eco-Environmental Influence of Mineral Resource Exploitation - Cased by Yalong River Basin in Jiulong County Study of Red Mud as Compound Sulfur-Fixing Agent Research on Separating Rubidium from Deep Potassium-Rich Old Brine by Solvent Extraction Application of Two Correction Methods in Eliminating Regional Errors of Geochemical Data Chapter 9: Exploration and Mining of Oil and Gas Resources Application of Ultra-Heavy Oil Well Completion Technique in Heat Insulated Casings Effects of Fractured-Vuggy Porous Media Geometrical Configuration on Oil and Gas Reservoir Pressure Force Field Impact Prediction Using Oil-Spill Simulation in Yantai West Harbor Dock Similar Constructive Method of Solution for the Model of Nonlinear Spherical Seepage in Composite Reservoir Study on Oil-Water Interfacial Behaviour of Henan Oilfield Study on Physical Simulation of Polymer Flooding System in the Block of Liaohe Oilfield The Research Progress of Threshold Pressure Gradient Chapter 10: Machines and Equipments for Energy and Resource Processing CFD Simulation of Air Flow through the Annular Distributor of a Swirling Fluidized Bed Erosion-Corrosion Behavior of Hydraulic Perforating Equipment during Fracturing Factors Contributing to Haze and the Influence on External Insulation of Power Equipments Numerical Simulation of Cavitation Flow Field in a Francis Turbine Runner with Attached Blades Numerical Simulation of Modified Trailing Edge of Francis Turbine Stay Vane Based on Solid-Liquid Two-Phase Flow Projective Modeling of Hydraulic Turbine Draft Tube Elbow Part Based on Pro/E Effects of Intake Temperature on the Combustion Characteristics of HCCI Engine Fueled with n-Butanol Analysis of Characteristic the Heat Transfer on Mine-Used Inverter Discussion on the Structure of Low-Temperature Radiant Heater of Gate Station Parametric Study of a Horizontal Tube Heat Exchanger for LNG Submerged Combustion Vaporiser The Simulation Study of Permanent Magnet Synchronous Motor and its Hysteresis Current Control Based on AMESim An Application Analysis of Solution Circulation Heat Recovery System in Natural Gas Fired Boiler Calculation and Experiment of Vibration of Droplet Subjected to Pulse Electric Field in Emulsified Oil The Research of Biomass Boiler Heating Surface Corrosion Study on Maximum Power Point Tracking Algorithm of Automobile Exhaust Thermoelectric Generator Chapter 11: Theory and Practice of Sustainable Development An Empirical Analysis on the Influence Factors of Industry Flow of Shaanxi Province Science and Technology Human Resources Dynamic Research on Residents Consumption and Power Consumption of Harbin Using GM(1,1) Model Effects of Nutrient Enrichment on a Realistic Food Web Evaluation Method on Energy Consumption and Carbon Emission for Public Building Evaluation of Shaanxi’s Industry Ecologicalization Based on Principal Component Analysis Game Models of Green Supply Chain Involved the Third Party Logistics The Application of Green Vernacular Building Technology in the Folk House Construction: Using the Case of Folk House Reconstruction in Lushan County of Sichuan Province as an Example, after the Earthquake Disaster The Change of Energy Consumption in China and its Driving Forces The Effects of Trade, Domestic Final Demand and Technology on Energy Consumption of China Research on Land Intensive Use of the Langfang National Economic and Technological Development Zone in Hebei Province


Best Sellers


Product Details
  • ISBN-13: 9783038353553
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 782
  • Spine Width: 39 mm
  • Width: 170 mm
  • ISBN-10: 3038353558
  • Publisher Date: 26 Jan 2015
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 700 Applied Mechanics and Materials
  • Weight: 1400 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Advances in Energy Materials and Environment Engineering: (Volume 700 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Advances in Energy Materials and Environment Engineering: (Volume 700 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Advances in Energy Materials and Environment Engineering: (Volume 700 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!