Material Engineering Practice IX
Home > Medicine & Health Science textbooks > Medicine: general issues > Material Engineering Practice IX: (Volume 635 Key Engineering Materials)
Material Engineering Practice IX: (Volume 635 Key Engineering Materials)

Material Engineering Practice IX: (Volume 635 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

These are the proceedings of the 9th Scientific-Technical Conference on "Material in engineering practice, 2014". Its content was intended to present innovative materials on improving the properties of materials and quality of materials and, also on the degradation of properties during operation. Special attention was paid to the prediction of mechanical and technology materials properties as well as modern methods for testing the characteristics of materials.

Table of Contents:
Preface and Committees Changes of Mechanical Properties of AlSi7Mg0.3 Cast Alloy through Filtration Fatigue Properties of Synthetic Nodular Cast Irons The Fractography Analysis of IN 718 Alloy after Fatigue Test The Modified AlSi7Mg0.3 Cast Alloy Mechanical Properties Changes at Different Testing Temperatures The Influence of Severe Plastic Deformation on Structure and Mechanical Properties the Aluminium Alloy EN AW 6082 A Study on Sloshing Frequencies of Liquid-Tank System Analysis of New Generation Material Solutions of Lower Structure for Energy Efficient Buildings The Parameters Affecting Strength Calculation of Gears The Analysis of Chosen Material Properties at Thermal Drilling Changing the Hardness Automotive Steels at Different Strain Rate Fluidity Test of Al-Si Alloy Using by Computer Simulation Aberration Problem within the Process of Automation of the Photoelastic Measurement of the Stresses Corrosion Behaviour of Automotive Steel Sheets Depending on the Degree of Deformation Usability of Various LTCC in Microstrip Filters Construction Structure and Properties of Selected Natural Materials Cyclic Test of DP600 Steel under Tension-Compression Load for Different Pre-Strain Levels New Austenitic Creep Resistant Steels for Superheaters of USC Boilers Comparison of Experimental Stamping Punch Machinability Made out of Unconventional Materials Facesheet-Core Interface Delamination in Sandwich Panels Possibilities of Preparing Tools Working in Conditions of Abrasion Wear with the Modification of the Tool Surfaces by Nitridation The Methodic of Testing Using Experimental Equipment Influence of the Strain Rate and Heat Treatment on the Mechanical Properties of Steel Sheets High Temperature Oxidation of 9-12% Cr Materials P91 and P92 in Supercritical Water Cleanness and Mechanical Properties of Steel after Remelting under Different Slags by ESR IF Steel Effect of Rate Deformation on the Fracture Surface Change Microstructure of Agglomerate Produced with Charcoal as Substitution Fuel The Influence of Current Density on Tribological Behavior Ni-Co Electroplated Coatings Analysis of Crack in Kaplan Turbine Blade Calibration Process and Constructions of Extrusion Calibrators A Comparison of Mechanical Properties of Lumbar Bilateral Implants Manufactured by Additive and Conventional Technologies Influence of Welding Parameters on the Quality of Resistance Spot Welded Joints of DP600 Steels Hydrodynamic Analysis of Fluid Effect in Rigid Rectangular Tank due to Harmonic Motion The Methodology for Determining the Springback of Large Metal Stampings A Study of Thickness Change of Spherical Cup Made from TRIP Steel after Hydraulic Bulge Test Steel KODUR 460MC under Creep Condition Analysis of Material Solutions of Exterior Walls with Contact Thermal Insulation System Flexural Properties of FDM Prototypes Made with Honeycomb and Sparse Structure Use of Geopolymer Matrix Composites in the Construction of Fire Doors Influence of Metallurgical Treatment on Properties of Ductile Cast Iron GJS 400-18 LT Selection of Materials for the Body Deformation Zones Corrosion Characteristics of Transit Pipeline API 5L X60 The Wear Evaluation of Blasting Machine’s Blades Prediction and Verification of Compatibility of MMT Nanofiller in PA6 Matrix Probabilistic Modelling and the k-Value Concept Structural Properties of Ni-Co Electroplated Coatings Studied by X-Ray Micro-Beam Material Criteria for Parts Exposed to Liquid Medium Loading Selected Properties of Composites with Polypropylene after Ageing Analysis of Mechanical Properties of Individual Phases in Steels by Depth Sensing Indentation


Best Sellers


Product Details
  • ISBN-13: 9783038353447
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 242
  • Spine Width: 12 mm
  • Width: 170 mm
  • ISBN-10: 3038353442
  • Publisher Date: 18 Feb 2015
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 635 Key Engineering Materials
  • Weight: 600 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Material Engineering Practice IX: (Volume 635 Key Engineering Materials)
Trans Tech Publications Ltd -
Material Engineering Practice IX: (Volume 635 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Material Engineering Practice IX: (Volume 635 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!