Mechanical and Aerospace Engineering V: (Volume 1016 Advanced Materials Research)

This is a collection of selected, peer reviewed papers from the 2014 5th International Conference on Mechanical and Aerospace Engineering (ICMAE 2014), July 18-19, 2014, Madrid, Spain. The 146 papers are grouped as follows: Chapter 1. Applied Mechanics and Manufacturing, Chapter 2. Dynamics, Vibration and Acoustics Analysis, Chapter 3. Material Characterisation and Technology, Chapter 4. Aerodynamics, Aeroengineering and Aerospatial Applications, Chapter 5. Fluid Dynamics and CFD Application, Chapter 6. Motors and Engines, Combustion and Propulsion, Chapter 7. Control Systems, Robotics and Automatics, Chapter 8. Thermal Analysis Technologies and Applications, and, Chapter 9. Computational Techniques and Numerical Methods.

Table of Contents:
Preface, Committees and Sponsors Chapter 1. Applied Mechanics and Manufacturing On-Machine Measurement System Implemented Based on Fanuc CNC System Using a Touch Trigger Probe Evaluation of the Fatigue Linear Damage Accumulation Rule for Aeronautical CFRP Using Artificial Neural Networks Study on Water Cushion Belt Conveyor A Game Theoretic Analysis on Cloud Manufacturing Model Study the Effect of CaCO3 Nanoparticles on the Mechanical Properties of Virgin and Waste Polypropylene Contact Pressure Distribution in Joints Formed by V-Band Clamps Determining a Robust, Pareto Optimal Geometry for a Welded Joint Application of Peridynamic Theory to Nanocomposite Materials Application of Shainin Design of Experiment Method on Metal Turning Operation Study of a W-Beam Guardrail Behaviour in Road Safety Barriers Analysis of the Torsional Load Capacity of V-Section Band Clamps Characterization and Modeling of Ladle Teeming Process Modeling and Analysis of Kinetic Characteristics of a Gear-Linkage Mechanism Study on Spring-Back Effect with Various Temperature of Magnesium Alloy in Roll Forming Process Influence of MoN Sputtering Coating on Wear Resistance of a Fishing Net-Weaving Machine Component On Approximation of Reserve Factors Dependency on Loads for Composite Stiffened Panels Improving the Mechanical Properties of a Machine Component of a Fishing-Net Weaving Machine by Duplex Coating Mechanical Performance Analysis of Composite Scarf Joints with Debond Flaw Compressive and Shearing Mechanical Anisotropy of Aluminum after ECAP Constitutive Models for Uniaxially-Post-Buckled Square Lattices Surface Morphology and Deformation Mechanism of Single Crystal Copper Treated by Laser Shock Peening Quasi-Static Compressive Properties of Aluminium Foams with Functionally Graded Properties Prediction of Long-Term Compression Strength for Quasi-Isotropic CFRP Laminates Numerical Modeling to Determine Test Conditions of Shear Blanking Test for a Hybrid Material Mechanical Characteristic Changes of Carbon Fiber Reinforced Plastics (CFRP) Depending on the Lamination Methods Effects of Number of Inserts and Insert Materials on Surface Roughness of Cast-Iron Work Produced by Face Milling A Study on the Tensile Strength and Thermal Property of CFRP Using Infrared Thermography Camera A Comparative Study on the Hardness of CrN, CrC and CrCN Coatings Comparison of Analytical Models of Force Prediction during Dynamic Bending Stage for 3-Roller Conical Bending Process Numerical Simulation of Compressive Response of Open-Cell Aluminum Foams Taguchi Optimization of Process Parameters in Friction Stir Spot Welding of AA5754 and AA2024 Alloys CNC Processing of Nurbs Curve Based on AutoCAD Multi-Objective Optimization of CNC Turning Machining Parameters Effect of Powder Flow Rate and Gas Flow Rate on the Evolving Properties of Deposited Ti6Al4V/Cu Composites Chapter 2. Dynamics, Vibration and Acoustics Analysis A Simplified Finite Element Riveted Lap Joint Model in Structural Dynamic Analysis A Novel Technique for Dynamic Analysis of Beam-Like Structures on Tensionless Elastic Foundations Subjected to Moving Loads Simulation of Sinusoidal Vibration Control Algorithm Based on Hydraulic Vibration Table Research on the Water-Based Hydraulic Vibration Test-Bed Vibration Analysis of Four-Edge Clamped Plain Weave Composite Plates with Different Impact Damage Patterns: An Experimental Study Numerical Model for Prediction of Cutting Forces in a Vibratory Drilling Process Dynamics Characterization of Missiles with Control Flaps Based on CFD Rigid-Flexible Coupling Dynamics Analysis for a Twin-Rotor Piston Engine The Approach to the Noise and Vibration Management in the Power Products Design The Specification of Unknown Force within Dynamic Analysis of Slider Crank Mechanism by Three Various Access Importance of Enclosed Gas for Modal Analysis of Space Inflatable Structure Early Diagnosis of Spalling in the Gear Teeth Acoustic Optimization Design Method of Gear System Near-Field Beamforming Source Localization for Gear Transmission in a Semi-Anechoic Room Heterogeneous Speech Prediction Using LDA Classifiers Ultrasonic Sonic Imaging for a Two Phase System Based on Support Vector Machine Classifier Experimental Validation of the Modified Continuously Variable Command Law of a Semi-Active Suspension Integrating a Magneto-Rheological (MR) Damper Preliminary Model Analysis of Acoustic Noise Levels for Space Station Research of Human Modeling and Motion Simulation Based on ADAMS Static and Dynamic Tensile Behavior of Unidirectional Glass/Epoxy Composites Chapter 3. Material Characterisation and Technology Influence of Power on the Microstructure and Optical Properties of Microcrystalline Si Films Comparative Evaluation of Activated Carbons Prepared by Thermo-Chemical Activation of Lignocellulosic Residues Aiming at Phenol Removal Corrosion of Reinforcing Bars Astm A706 in Self-Compacting Concrete Subjected to Chloride Attack and Carbonation Tribocorrosion Behavior of [Ticn/Tinbcn]n Coating on Austenitic Steels Substrate in Hanks' Balanced Salt Solution Evaluation of Oven and Microwave Drying of Ceramic Material with Adition of Quartzito to Form a Composite The Role of Vanadium in Reduction of Helium Diffusion in Tungsten Based Alloys Investigation of Solid Solubility, Hardness, and Thermal Properties of Au-Ge-Sb System Experimental and Numerical Analysis Applied on Steel Bars Cooling Chapter 4. Aerodynamics, Aeroengineering and Aerospatial Applications Low Speed Aerodynamics of Drogue System Refueling of Unmanned Aerial Vehicles Aerodynamic Performance of Blended Wing Body Aircraft with Distributed Propulsion The Effect of Gust on Blended-Wing-Body Civil Aircraft Parametric Aircraft Design Optimisation Study Using Span and Mean Chord as Main Design Drivers Wind Tunnel Study on a Missile with Forward-Facing Cavity in Supersonic Flow High Swept-Back Delta Wing Flow A SMA Based Morphing Leading Edge Architecture Vacuum Degree Measuring Technique and its Development Tendency inside a Satellite in the Thermal Vacuum Test The Synthesis of the Robust Stabilization System of Cable Tension for the Test Bench of Weightlessness Simulation Aerodynamic and Performance Analysis of Representatives of One Century of Low Speed Aircraft Building Data Fusion Surrogate Models for Spacecraft Aerodynamic Problems with Incomplete Factorial Design of Experiments Application of Rare Event Anticipation Techniques to Aircraft Health Management Estimation Mass of the Aircraft Wing with the Multidisciplinary Process Improvement Design of the Insulation Structure of High Temperature Pneumatic Duct System of the Aircraft Airborne Sensor Model Position Fidelity Determination for Combat Aircraft Simulators Design and Development of Vertical Takeoff and Horizontal Transition Mini Unmanned Aerial Vehicle Study on Serial MPPT Electrical Power System Stability for Space Application Analysis of Orbital Thermal Environment for Inclined-LEO Small Satellite State-Space Rotor Aeroelastic Modeling for Real-Time Helicopter Flight Simulation Flight Loads Analysis of a Maneuvering Transport Aircraft Effect of Reduced Frequency on Longitudinal Oscillatory Derivatives of an Airfoil Based on Wind Tunnel Data SOA-Cloud Computing Based Fast and Scalable Simulation Architecture for Advanced Flight Management System Effect of Radiation Induced Charge Neutralization on ELDRS Using Low Temperature Irradiation for ELDRS Estimation Numerical Experiment of a Symmetrical Airfoil with Attack Angle of 5 Degrees in Fluctuating Relative Flow Velocity Research on Numerical Simulation of Support Interference for Dynamic Derivatives at Hypersonic Flight Speeds Numerical Simulation of Powered High-Lift Flow Analysis of an Airdrop Motion Coupling N-S Equations with 6 DOF Motion Equations Best Attack Position Model for BVR Multi-Target Air Combat Analysis of an Aero-Engine Gas Path Fault Monitoring Sensor Model On the Physical Mechanism of the Interaction of the Microwave Radiation with the Semiconductor Diodes Chapter 5. Fluid Dynamics and CFD Application Aeroacoustics Investigation of an Automotive Exhaust Muffler Assessment of Real Gas Effects on Approximate and Boundary Layer Equations for Hypersonic Laminar Flow over Axisymmetric Bodies Computational Studies of Turbulent Flows in Rotating Radial and 200 Backward Swept Diverging Channels On the Unsteady Flow of Two Incompressible Immiscible Second Grade Fluids between Two Parallel Plates CFD Modeling and Design of Wind Boosters for Low Speed Vertical Axis Wind Turbines Investigation and Simulation of Supersonic Gas Jet for Martian Dust Removal Analysis of Variable Viscosity Channel Flow under Constant Magnetic Field via Generalized Differential Quadrature Method Modeling and Simulation of Supersonic Flow in 2D Nozzle Using MacCormack’s and Upwind Methods Chapter 6. Motors and Engines, Combustion and Propulsion The Simulation Calculation of Temperatures on Valve Seats of Combustion Engine and its Verification Numerical Studies of Engine Performance, Emission and Combustion Characteristics of a Diesel Engine Fuelled with Hydrogen Blends Study on Flame Spread over Aviation Kerosene and Diesel Investigation of Syngas Combustion at Variable Methane Composition in Can Combustor Using CFD Investigation of Engine Performance and Emission Characteristics of Si Engine Fuelled with Ethanol Blends by Numerical Simulation Investigation of Effects Ofinlet Boundary Conditions on the Flow Behaviour in a Diesel Injector Design of System Hydrogen Engine Supercharging Description of Sequences of Rhythmic Motor Primitives Numerical Analysis of Tumble, Cross Tumble and Swirl Ratios in a Single Cylinder Research Engine Sensitivity Analysis of the Air Flow inside a Single Cylinder Engine for Different Turbulence Models Using CFD Modeling and Analysis on Mean Effective Torque of Rotors in Twin-Rotor Cylinder-Embedded Piston Engine Numerical Analysis of the Flow Field in the Nozzle of Hot Water Rocket Motor Optimization Design for Contour of Pintle Nozzle in Solid Rocket Motor Based on Response Surface Method Chapter 7. Control Systems, Robotics and Automatics Cooperative Tracking Control for Formation Keeping of Fractionated Spacecraft Based on Error Exchanging Assessment of a General Aviation Pilot Assisting System Influence on the Piloting Performance and Safety of Inexperienced Pilots The Simulation of Rotor Field Oriented Control of PMSM Real-Time Monitoring of Harmonic Currents: A Case Study of a Shopping Center Design and Non-Linear Simulations of a Fault-Tolerant Flight Control A Hybrid Control Model to Develop the Trajectory-Tracking Controller for a Quadrotor UAV A Novel Approach to Model and Implement Planar Trajectory-Tracking Controllers for AUVs/ASVs Validation of Numerical Simulation Method for Active Flow Control Technology Symbolic Trajectory Description Using Frescoes Gait of a Biped Robot Implemented on a FPGA Modelling and Comparison of Compressor Performance Parameters by Using ANFIS Robotic Vision for Hospital Inspection Gas Turbine Fault Detection and Isolation Using Adaptive Neurofuzzy Inference System (ANFIS) Kinematic Analysis for Hybrid 2-(6-UPU) Manipulator Using Wavelet Neural Network Chapter 8. Thermal Analysis Technologies and Applications Measurements of Thermal Properties of Different Building Materials Three-Dimensional Numerical Simulation of Mixed Convective Heat Transfer in a Horizontal Rectangular Duct Utilizing Nanofluids Heat Transfer Enhancement in Turbine Blade Internal Cooling Ducts Comparative Study between a Heat Pump and an Electrical Resistance as Energy Support for a Solar Water Heater Analysis of the Temperature Evolution during Lined Pipe Welding Calculation of Heat Transfer in Heterogeneous Structures such as Honeycomb by Using Numerical Solution of Stochastic Differential Equations A Numerical Study of the Thermal Critical Component on FORMOSAT-7 with Phase Change Material Application of Differential Quadrature Method (DQM) to Heat Transfer and Entropy Generation Problems Evaluation of Correlations for Natural Convection on the Behavior of a Wire-on-Tube Condenser Chapter 9. Computational Techniques and Numerical Methods RETRACTED: Hybrid Hidden Markov Models and Neural Networks Based on Face Recognition Nonlinear Fuzzy Robust PCA Algorithm for Pain Decision Support System Buckling and Post-Buckling of Composite Shells with Asymmetric Meshing in Form of Axial Band in Numerical Model Guidance Solutions for Multiple Vehicle Assembly Stochastic Models in Preventive Maintenance Policies Infant Pain Recognition with Homomorphic Filter and k-NN Classifier Study on Improving the Degree of Size Precision of Rack Tube A Numerical Study Onfire Suppression of Water Mist in Microgravity BicriteriaHeuristic for Unrelated Parallel Machine Scheduling Problem