Innovative Solutions in the Field of Engineering Sciences
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Mechanical engineering > Innovative Solutions in the Field of Engineering Sciences: (Volume 590 Applied Mechanics and Materials)
Innovative Solutions in the Field of Engineering Sciences: (Volume 590 Applied Mechanics and Materials)

Innovative Solutions in the Field of Engineering Sciences: (Volume 590 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

This is a collection of selected, peer reviewed papers from the 2014 International Conference on Applied Mechanics and Mechanical Automation (AMMA2014), May 20-21, 2014, Macao, China. The 171 papers are grouped as follows: Chapter 1: Applied Mechanics and Engineering, Chapter 2: Advances in Materials Sciences and Processing Technologies, Chapter 3: Construction, Building Materials and Structural, Chapter 4: Advances in Mechatronics, Robotics and Automation, Chapter 5: Advances in Electrical and Power Engineering, Chapter 6: Advances in Design Technologies, Chapter 7: Measurements, Testing and Monitoring, Chapter 8: Computational Methods and Algorithms, Communication and Applied Information Technologies, Chapter 9: Biomedical Engineering, and, Chapter 10: Engineering Management and Technologies in Education.

Table of Contents:
Preface and Organizing Committee Chapter 1: Applied Mechanics and Engineering The Method of Tension Control with Gravity Balance True Stress and Shakedown Analysis of Pressure Vessel which under Cyclic Loading to Plastic Deformation Analysis of the Effects of Fiber Gradient Distribution on the Mechanical Properties of Moso Bamboo Mechanical Properties of Tetrazole Polymers Studies on Inertial Effect of Transmission Device Components The Vibration Based on Non-Zero Point Force Moment Elasticity Theory Fatigue Analysis Based on the Non-Zero Point Force Moment Elasticity Theory Numerical Simulation of Dynamic Response of Planing Craft Sailing in Calm Water Calculation of Effect of Viscous and Pressure Forces on Trimming Moments Develop a Magnetic Pendulum to Scavenge Human Kinetic Energy from Arm Motion Effect of Leading Edge Geometry on Boundary Layer Transition-An Experimental Approach Effective Mechanical Behavior of Sandwich Beams under Uncoupled Bending and Torsion Loadings The Effect of Stress Wave on Dynamic Response of Square Thin-Walled Tube Wind-Induced Response of ADSS during the Passage of High-Speed Train Influence of Back Support on the Sagittal Plane Biodynamic Response of Seated Human under Vertical Vibration Microstructure and Mechanical Properties of (TiAlZrNb) N Films The Investigation of Turbulence Models Based on Numerical Simulation Research on Hole Making Mechanism of High Pressure Hydraulic Perforation Review on the Research of Orifice Plate Hydraulic Characteristics Numerical Simulation Analyses on Thick Wall Pipe with Radial Cracks Using Circumferential Lamb Wave Thermodynamic Analysis of R410A Refrigeration Cycle with a Two-Phase Ejector Three-Dimensional Wind-Induced Vibration Control Using MTMD Based on Energy Balance Theory The Coupling Characteristic of HSK Tool-Holder/Spindle Interface for High-Speed NC Machine Tool Self-Calibration of XY-Stage with Parallel Mechanism Analysis on Strength of the Frame of a Mine Dump Truck Numerical Simulation of Vehicle Crashes The Dynamic Loadings of the Solar Panel Mounted on Flat Roof-Top of Buildings by Wind Effects Research on Evaluation of Vibration Isolation Efficiency Based on Power Flow Analysis A Stability Analysis of Roll Curved Conveyer Line Computational Simulation of Multi-Product Flow in an Oil Transportation Pipeline Master-Slave-Parallel Chaotic Synchronization in Class-C Lasers by Controlling the Pump Application of Horizontal well Multiphase Steady State Flow Model to Evaluate Water Control Effect of ICD Chapter 2: Advances in Materials Sciences and Processing Technologies Effect of B Refinement on Structure and Fracture Morphology of Al-7 wt.% Si Alloy Influence of Heat Treatment on Properties of 2219AA-T6 FSW Joints A Study on Cutting Glass Fibers by CO2 Laser Three-Dimensional Ultrafast Laser Micromachining of Silicon for Microsystems Effects of Cu-Zn-Ni Electrode during EDM of SUS 304 Material Enhancing the Piezoresistance Senstivity and Repeatability of Carbon Nanotube/Silicone Nanocomposites Facile and Effective Purification of Arc-Discharged Single-Walled Carbon Nanotubes by Centrifugation Preparation and Properties of Y and Sb Doped SnO2 Conductive Powders Preparation and Properties of Eu, Sb Doped SnO2 and Quartz Compound Conductive Powders Electrostatic Interaction between Dissimilarly Charged Membranes in Salt-Free Solution Effect of Oxygen Partial Pressure on Electrical Characteristics of Amorphous Zinc-Tin-Oxide Thin-Film Transistors Analysis of CuO-Water Nanofluid Application on Heat Pipe Alloy Inconel 718 by 3D Micro-Electro Discharge Machining Deep Hole of AISI P20 Mold Steel Material by Electrical Discharge Machining Research on Joint Strength of Aluminum Alloy Welded by FSW Study of Preparation Technology and Properties of Silver Based Electric Brush Materials Experimental Study on Dispersion and Explosion Process of Fuel-Air Mixture in Underground Fuel Depot Visualization Study of Dust Dispersion Process in Siwek 20-L Device for Dust Explosion Test Effects of Technological Conditions and Substrate Material on TD Coatings Investigation Colorized Property and Construct of Functional Devices for Electrochromic Coating Film Prediction of Thermal Gradient in Traverse Cylindrical Grind-Hardening Maleic Anhydride Grafted Modified PA6 as Compatilizer Preparation of PLA/PA6 Blend AHSS Auto Structural Metal Stampings: Crucial Role of Lubricant Effect of Machining Parameters and Wear Mechanism in Milling Mold Steel AISI-P20 and AISI-1050 Analysis of Feed-Direction Burr Formation in Micro-Turning Chapter 3: Construction, Building Materials and Structural Influence on Pitting Corrosion Behavior of Welded AISI30400 Plate in a Freeze-Thaw Environment Finite Element Analysis of Dry Shrinkage of Fiber Cement Mortar Experimental Research on Flexural Behavior of Precast Thin-Wall Steel and Spun Concrete Composite Pile Two-Run Genetic Programming for Predicting Slump Flow of Concrete Working Mechanism of Two-Phase Varying Stiffness Piled Raft Foundation Static Loading Tests of New Type of Bolt Assembly Connection Developed for Perspective Temporary Steel Railway Bridges Research on Horizontal Bearing Capacity of Precast Thin-Wall Steel and Spun Concrete Composite Pile Comparative Study between Field Measurement and Wind Tunnel Test of Wind Pressure on Wuhan International Stock Building The Scope of Round-Pier’s Suction Effects Simulation Study about Impact of Building Density on Heat Island Effect Mechanical Characteristics of Three-Truss Plate-Truss Composite Bridges on High-Speed Railways Experimental Verification of Glass-Fibre-Concrete Covers of Footbridge Deck Cornice, Subjected to Wind Loading Actions Chapter 4: Advances in Mechatronics, Robotics and Automation A Preliminary Study of the Dynamic and Control of the Solar Sail An Implementation of Energy Saving Control Systems with Contactless Programmable and PWM Scheme Neural Network Adaptive Control of Free Floating Space Robot with Actuator Saturation Safety Driving Decision-Making of the Advanced Vehicle Control and Safety System Fault Diagnosis for Diesel Engine Cylinder Head Based on Genetic-SVM Classifier Analysis of the Lateral Stability for Four-Wheel Independent Driving Electric Vehicles LQR+PID Control and Implementation of Two-Wheeled Self-Balancing Robot Docking System and Power Management for Autonomous Mobile Robots Adaptive Method to Trajectory Tracking for Lane Changing The Research for Data Acquisition Technology in High-Speed Cutting Database A Deformable Spherical Mobile Robot The Optimal Design of Fuel Cell Bus Power Train The Design of Inertial Tracking System Based upon MEMS Sensor Research on Vehicle Rollover Warning System Embedded Technology Parameter Scheduling Optimization Expert System on the Plastic Extruder Applications in Production Impact of Electric Vehicle Lateral Dynamics on the Battery Pack Artificial Neural Networks Applied to Bandsawing Process Control Point Cloud Feature Extraction Based Integrated Positioning Method for Unmanned Vehicle An Active Loop Closure Fast SLAM Method Base on Topology – Section Lines Cascading Map Disturbance Rejection for Discrete-Time Linear Systems with Time-Delays via Internal Model Principle Chapter 5: Advances in Electrical and Power Engineering Study on DC Bias Vibration Signal Separation and Experiment of Transformer Based on FAST-ICA Algorithm Application of GWS-1 Remote Equipment in the UHVDC Projects Comparative Study on Low Voltage Ride-Through Test Methods for Grid-Connected Photovoltaic Inverter Research and Investigation of the BCM Design for PFC Boost Converters Initial Charging Current and SOC Strategy about Battery Based on Fuzzy Logic Optimal Virtual Power Plant Dispatching Approach The Operation Dispatch of Cogeneration Systems in the Deregulation Environment The Locating and Sizing of Distribution Generation Based on the Distribution Network Chapter 6: Advances in Design Technologies Development of a Treadmill Platform for Dynamic Training with Vibratory Stimuli Analysis and Collision Simulation Research of the Latest Underrun Protective Device Sensitivity Analysis of Flexible Pavement Parameters by Mechanistic-Empirical Design Guide Analysis of the Impact of Specific Heat Ratio on Two-Dimensional Low Maher Number Nozzle Design Design of a Robot Applied to Inspection of Power Transmission Lines Research on the Design Method of Intelligent Interaction in Industrial Design A Wheelchair Design for Topple Prevention A Wheelchair Design for the Elderly with Small Strength An Apparatus Design to Assist Standing Up from Sitting Shaft Design Check with AutoCAD-Mechanical Design and Development of Beverage Maker Research on the Rapid Slicing Algorithm Based on Triangle Facets Ring The Approachment for Developing a CAD System for Cam Mechanisms of ATC Chapter 7: Measurements, Testing and Monitoring Air-to-Water Heat Pump Monitoring in the Cold Climate Region A Novel Wireless Passive SAW Temperature Sensor Structure Design and Simulation To Explore the UAV Application in Disaster Prevention and Reduction Experimental Study on Counter Current Flow Limitation Based on Variation of Gap Size in Narrow Rectangular Channel during Quenching Process Vision Based Measurement of Refueling Drogue for Autonomous Aerial Refueling Digital Moiré Phase-Shifting Interferometric Technique for Aspheric Testing A Permittivity Measurement Method Based on Cavity Perturbation Technique Refractive Index Sensor Based on Photonic Crystal Fiber Coated with Silver Film Simulation of Non-Destructive Testing on Weld Surface Crack of Metal Structure by Electromagnetically Stimulated Infrared Thermography On-Line Monitoring of Drill Wear Using Air-Coupled Audio Microphone when Drilling Composite Materials Experimental Study of Methane Sensor Based on the Principle of Infrared Detection Identification of the Content of Ganoderma Lucidum Powder in Ganoderma Lucidum Spore Powder Based on Near-Infrared Spectroscopy and Partial Least Squares 3D Reconstruction for Underwater Target Based on Linear Structured Light Chapter 8: Computational Methods and Algorithms, Communication and Applied Information Technologies Application of Neuro-Fuzzy Inference System on Wood Identification A New Method for Computing Eigenpairs of a Finite Element Structure An Improved Particle Filter SLAM Algorithm in Similar Environments Application of Radial Basis Function Neural Network for Carbon Price Forecasting Affinity Propagation Clustering Algorithm Based on PCA Combining Expert Strategies in Multimodal Classification Using Term-Based Partitioning Framework on MongoDB and Elastic Search An Efficient Adaptive Wolf Pack Search Algorithm Comparative Study on Zero Forcing Block Linear Equalization for TD-SCDMA Improved Low-Rank Matrix Approximation for Hyperspectral Image Spatial-Spectral Feature Extraction Comparative Analysis of the Status of the Network Protocol Reverse Engineering The Research of Speech Recognition in Low SNR Based on GA-SVM Compare SM Solver, ANSYS Soft Ware to Analyze Structural Internal Force Bars Adaptive Image Generalized Fuzzy Enhancement and Quality Evaluation Study on Alcohol Testing Modeling and Design of Trusted Driving Safety Control System Based on IOT Validity Analysis of Finger Vein Application in Identity Authentication Security Framework Using Forensic Function and Log Management Community Structure Analysis in Social Network of Sina Weibo Fault Diagnosis and Reliability Growth for Information System Optimal Policies for a K-Phase Service System with Bernoulli Vacation Schedule Application of Targeted Consistency-Adjusting Method in Group Decision-Making Research on Individuation Task Allocating Based on Team Collaboration Image Trading Mechanism Based on Hybrid Watermarking Techniques A Novel Non-Uniform BTC and its Application Some Properties of (Inverse)N0-Matrices with its Applications Probabilistic Teleportation via a Partially Entangled GHZ State being Known by only the Sender Chapter 9: Biomedical Engineering A Novel Parameter Estimation Method for Drug Diffusion, Distribution and Clearance in the Rat Brain Extracellular Space Free Software for the Detection of Structures in Breast Images The Effect of Bioprosthetic Heart Valve with Different Suture Densities Advisory Software for Improving the Prevention of Dentistry Medical Conditions Arising from Chronic Diseases Impairments of Working Memory for Object-Location Associations in Depression The Approach for Dose-Effect Relationship of TCM Research Based the Overall Effect of Metabonomics Military Parachuting Injuries among Male and Female Cadet Pilots: A Prospective Study of 59,932 Jumps Chapter 10: Engineering Management and Technologies in Education A Life Cycle Impacts Assessment of the Differences between the LNG Cement Mixer Truck and its Diesel Counterpart The Measurement of Technology Innovation Spillover Effect between Sections: A Case Study of Tangshan Optimizing Chinese Motorized Transportation Modes to Support Cross-River Public Activities Analysis on the College Campus of Road Traffic Safety in China Optimization of the Automobile Parts Mixed Production Line Based on EM-Plant Reliability Analysis and Prediction of Metro Vehicles’ Bogie Frame Characterization of the Specific Electrical Energy Consumption of Agrifood Industries in the Central Region of Portugal Staged Cost Influence Factors Analysis on Power Transmission Project Correlation Analysis and Control Scheme Research on PM2.5 The Influence of FDI on the Market Structure of the Port Industry Research on Social Profitability Threshold of China Intercity Railway Based on Passenger Demand An Exploration of Success Factors for the Comprehensive Construction of a Shopping Area from the Consumer Point of View — A Case Study of the Business Area of Sanyi, Miaoli Study on Modeling for Comprehensive Quality of Music Graduate Students Evaluation System Computer Aided Design of Chinese College English Teaching Materials Based on COCA Corpus Real Physical Model Marking Digital Control Experiments


Best Sellers


Product Details
  • ISBN-13: 9783038351511
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 952
  • Spine Width: 48 mm
  • Width: 170 mm
  • ISBN-10: 3038351512
  • Publisher Date: 29 Aug 2014
  • Binding: Paperback
  • Language: English
  • Series Title: Volume 590 Applied Mechanics and Materials
  • Weight: 1740 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Innovative Solutions in the Field of Engineering Sciences: (Volume 590 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Innovative Solutions in the Field of Engineering Sciences: (Volume 590 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Innovative Solutions in the Field of Engineering Sciences: (Volume 590 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!