Buy Material Forming ESAFORM 2014 Book by Jari Larkiola
close menu
Bookswagon
search
My Account
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Materials science > Material Forming ESAFORM 2014: (Volumes 611-612 Key Engineering Materials)
Material Forming ESAFORM 2014: (Volumes 611-612 Key Engineering Materials)

Material Forming ESAFORM 2014: (Volumes 611-612 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

The Annual ESAFORM (European Scientific Association for Material Forming) conference brings together scientists and engineers working on all material forming processes with all types of materials. The topics cover range from fundamental aspects and modelling, to practical engineering applications. This proceeding contains selected, peer reviewed papers from the 17th Conference of the European Scientific Association on Material Forming, ESAFORM 2014, May 7-9, 2014, Espoo, Finland.

Table of Contents:
Preface and Organisation Chapter 1: Formability of Metallic Materials A Yield Criterion Based on Mean Shear Stress Mechanical Behavior of 980MPa NANOHITENTM at Elevated Temperatures and its Effect on Springback in Warm Forming Modelling Non-Quadratic Anisotropic Yield Criteria and Mixed Isotropic-Nonlinear Kinematic Hardening at Finite Strains Deformation Behavior of a Magnesium Alloy Sheet with Random Crystallographic Orientations Material Modeling and Springback Analysis Considering Tension/Compression Asymmetry of Flow Stresses Investigation of Different Techniques to Evaluate the FLC from Experiments and FE Simulations Development of Formability, Microstructure and Martensite Reversion during Intermediate Annealing of Metastable Austenitic Stainless Steel Forming Simulation Considering the Differential Work Hardening Behavior of a Cold Rolled Interstitial-Free Steel Sheet Novel Experimental Set-Up to Test Tubes Formability at Elevated Temperatures Influence of the Identification Procedure of the Yield Criterion on the Thickness Prediction of the Square Cup Investigation of the Hot Deformation Behavior of an Al-Mg-Sc-Zr Alloy under Plane Strain Condition Study on Instability and Forming Limit of Sheet Metal under Stretch-Bending Improvement in Ductility in Commercially Pure Titanium Alloys by Stress Relaxation at Room Temperature Studies on Ductile Damage and Flow Instabilities during Hot Deformation of a Multiphase γ-TiAl Alloy A Generalized Damage Model Accounting for Instability and Ductile Fracture for Sheet Metals Influence of Cooling Rate on Free Interstitial Concentration in Type 430 Ferritic Stainless Steel Heat Treatments Analysis of Steel Using Coupled Phase Field and Finite Element Methods Chapter 2: Forging and Rolling Punch Wear in the Forming of Deep Holes with Pulse Ram Motion on a Servo Press A Study of the Effects of Reversal Cycles in the Gear Rolling Process by Using Finite Element Simulations Influence of Heat Treatment on Rolling and Final Properties of Welded Steels 1.4404 and 1.4571 Titanium Hot Stretch Forming: Experimental and Modeling Residual Stress Analysis Microstructures and Crack Formation in Hot Compression Test of Ultrahigh Carbon Steel Warm-Forging Characteristics and Microstructural Response of Medium-Carbon High-Strength Steels for High-Duty Components The Calibration of High Energy-Rate Impact Forging Hammers by the Copper-Column Upsetting Method and High Speed Camera Measurements Effect of the Kinematic Hardening in the Simulations of the Straightening of Long Rolled Profiles Computing Flatness Defects in Sheet Rolling by Arlequin and Asymptotic Numerical Methods Intended Dishing in Ring Rolling Potentials of Ceramic Die Materials for Isothermal Forging Purposes of a Titanium Alloy Numerical and Experimental Investigations on Fold Formation in Forged Parts Buckling of Long Thin Plates under Residual Stresses with Application to Strip Rolling Surface Modifications for Optimized Forming Operations Chapter 3: Composites Forming Processes Hypo-Elastic vs Hyper-Elastic Constitutive Equation for Textile Materials at Meso-Scale The Effect of Mandrel Configuration on the Warpage in Pultrusion of Rectangular Hollow Profiles Deformability of a Flax Reinforcement for Composite Materials A Computational Approach Based on Flow Front Shape Dynamic Behavior for the Process Characterization during Filling in Liquid Resin Infusion Investigation of the Spring-In of a Pultruded L-Shaped Profile for Various Processing Conditions and Thicknesses An Integral Mesoscopic Material Characterization Approach Locking and Stability of 3D Woven Composite Reinforcements Tribological Study of Polymer Composite Forming Using Model Experiments and Real Composites A Robust Monolithic Approach for Resin Infusion Based Process Modelling Analysis of Composite Reinforcement at Mesoscopic Scale from X-Ray Microtomography Application of a Discrete Mesoscopic Finite Element Approach to Investigate the Bending and Folding of Fiber-Reinforced Composite Materials during the Manufacturing Process Investigation of the Mechanical Properties of a Stitched Triaxial Fabric Improving Computational Efficiency in LCM by Using Computational Geometry and Model Reduction Techniques Characterizations of STF-Treated Aramid Fabrics Using Picture Frame Test Isothermal Multisection Tooling for the Automated Preforming of Carbon Fiber Composite Structures Analyses of Textile Composite Reinforcement Compaction at the Mesoscopic Scale Modelling and Simulation of the Coupling of Normal Pressure and Shear Force in Plain Woven Fabrics Thermoforming Simulation of Multilayer Composites with Continuous Fibre and Thermoplastic Matrix Investigation of Fibre Movement in Molten Polymer during Shaping Processes of Thermoplastic Composites Novel Intermediate Temperature Ceramic Composites, Materials and Processing for Siloxane Based Basalt Fiber Composites Variable Forming Tool and Process for Thermoset Prepregs with Simulation Verified Part Quality Bending Characterization of UD Composites Forming Limits of Thermoplastic Composites Chapter 4: Friction and Wear in Material Processing Manufacturing and Tribological Investigation of Hot Micro-Coined Lubrication Pockets Friction Coefficient Identification in Roll Forming Processes Influence of Friction on the Loads in a Roll Forming Simulation with Compliant Rolls Wear Behavior of WC-Co Carbides with Addition of Cr3C2 and Ni A First Step towards a Tribological Approach to Investigate Cutting Tool Wear A Study of Mold Friction and Wear in Injection Molding of Plastic-Bonded Hard Ferrite Chapter 5: Multiscale & Continuum Constitutive Modelling Establishment of Stress-Strain Relationships of Tailor-Welded Tubes via DIC Method Based on Uniaxial Tensile Tests Microstructure Prediction during Hot Deformation Using New Dynamic Recrystallization Model and Finite Element Analysis Development of the Modified Cellular Automata Sphere Growth Model for Creation of the Digital Material Representations Modelling of the Microstructure Evolution Using Cellular Automata Framework and WorkFlow Approach Re-Meshing in Finite Element Simulations of Hot Working Including a Microstructural Evolution Model First Steps towards Parametric Modeling of FSW Processes by Using Advanced Separated Representations: Numerical Techniques Numerical Study of the Impact of Constitutive Modelling on the Evolution of Necking in the Case of a Tensile Test on C68 Grade Steel Influence of Contact Friction on the Experimental Determination of the Balanced Biaxial Strain-Ratio Using the Disc Compression Test Applications of Multi-Scale Models to Numerical Simulation and Experimental Analysis of Anisotropic Elastoplastic Behavior of Metallic Sheets Multiscale Finite Element Simulation of Forming Processes Based on Crystal Plasticity Validation of a Multi-Scale Model for Shear Deformation of an Aluminium Sheet Alloy Chapter 6: Nano-Structured Materials and Microforming Study of Microforging of Parallel Ribs from Metal Strip The Effect of Initial Grain Size on Formability of AZ31B Magnesium Alloy during I-ECAP Finite Element Analysis of the Effect of Flexible Pad on the Deformation of Metal Foils in Flexible Pad Laser Shock Microforming Using FEA in Assessing Backward Extrusion of Multiple Micro-Pins Evaluation of Tribological Properties of AlMg4.5Mn0.7 in Massive Microforming Using the Barrel Compression Test Chapter 7: Additive Manufacturing and Non-Conventional Processes Characterization of Hybrid Components Consisting of SEBM Additive Structures and Sheet Metal of Alloy Ti-6Al-4V Estimation of Material Removal by Profilometer Measurements in Mass Finishing A Vertical Type Tandem Twin Roll Caster for Clad Strip Equipped with a Scraper Increasing Performances of En AB-46000 by Squeeze Casting Influence of Titanium Carbide Fraction on Material Properties and EDM of ZrO2-TiC Ceramics Determination of High Strain-Rate Behavior of Metals: Applications to Magnetic Pulse Forming and Electrohydraulic Forming Small Diameter External Cylindrical Surfaces Obtained by Ram Electrical Discharge Machining Indentation Recovery of Shape Memory Foams Produced by Solid State Foaming Influence of Plasma Channel Change on the Surface Topology in the Electrical Discharge Machining A Non-Conventional Technique for Evaluating Welded Joints Based on the Electrical Conductivity Electrical Discharge Milling of Silicon Carbide with Different Electrical Conductivity Direct Molding of Polymers for Biomedical Applications Comparative Study on Parametric Analysis of μEDM of Non-Conductive Ceramics Experimental Research on Electrochemically Assisted Microturning Process Resource-Efficient Machining of Hard Metals The Influence of Process Parameters on the Forming of Riblets during Riblet Rolling Dual Electromagnetic Forming Using Single Uniform Pressure Coil Numerical Simulation of Laser Forming of Aluminum Sponges: Effect of Temperature and Heat Treatments Qualification of ECM-Processes by Electro Impedance Spectroscopy Fluid-Particle Separation of Magnetorheological (MR) Fluid in MR Machining Application Controlling Penetration Depth in Projection Stereolithography by Adjusting the Operation Wavelength Friction Stir Welding Assisted by Electrical Joule Effect to Overcome Lack of Penetration in Aluminium Alloys Fundamental Analysis of the Process Conditions during Electro Discharge Machining of Biodegradable Magnesium Mechanical Properties of a Metal Sandwich Panel Manufactured Using Longitudinally Laminated Forming Tools Designing and Manufacturing of a Flexible Longitudinally Laminated Sandwich Panel Forming Tool Laser Cutting of Aluminium Sheets with a Superficial Cold Spray Titanium Coating A Novel Heat Treatment Line for Processing of Tailored Small Batch Steels Structural Optimization and Additive Manufacturing Chapter 8: Structures, Properties and Processing of Polymers (and Biomass Based Materials) Effect of the Interdiffusion at the Polymer/Polymer Interface on the Flexural Properties of Over-Moulded Short Glass Fibre/Glass Fabric Reinforced PA6 Composites Formulation and Surface Properties of Bio-Based Polymer Films for Pharmaceutical Applications Substitution of Virgin Material by Recycled Material from End-of-Life Vehicle (ELV) Simplified Modelling of the Infrared Heating Involving the Air Convection Effect before the Injection Stretch Blowing Moulding of PET Preform Hot Press Moldability of Bamboo Powder without Additives Performance and Lightweight Thermoplastic Materials for Automotive Application using Hollow Microspheres Parameter Identification by Inverse Analysis Coupled with a Finite Pointset Method for Polyurethane Foam Expansion Investigation of Different Liquid Silicone Rubbers for Micro Pinch Valves Formation of the Printing Elements in the Photopolymer Material Used in Flexography FSI-Simulation of Liquid Supported Stretch Blow Molding (LBO): Model Validation and Study of Series Production Scenario Basic Knowledge Models for the Processing of Bread as a Solid Foam Resins Materials as Alternative Insert for the Fabrication of Micro Structured Surfaces by Micro Injection Moulding Modeling the Adhesion Bonding Mechanism in Overmolding Hybrid Structural Parts for Lightweight Applications Acetaldehyde Generation in Processing PET by Means of Hot Runner Systems Analysis of Polymer Crystallization with a Multiscale Modeling Approach Chapter 9: Energy Efficient Solutions in Material Forming Electromagnetic Sheet Metal Feeder Experimental Investigation of Energy Savings during Table-Top Hemming of Aluminum Alloys Effects of Weld Line in Deep Drawing of Tailor Welded Blanks of High Strength Steels Development of Metal Hollow Sphere Sandwich Construction and its Formability and Mechanical Property Chapter 10: Extrusion and Drawing Cold Forging with Lubricated Tools Increased Productivity in Hot Aluminum Extrusion by Using Extrusion Dies with Inner Cooling Channels Manufactured by Rapid Tooling Use of FEM and DoE to Reduce the Forming Force during Cold Extrusion of Prismatic Cell Housings Investigation of Friction Boundary Conditions during Extrusion of Aluminium and Magnesium Alloys Metal Flow Conditions in Porthole Channels of Different Size On the Velocity and the Strain Rate Field in Unlubricated Direct and Indirect Axisymmetric Extrusion of Al Chapter 11: Incremental and Sheet Metal Forming Applied State Space Feedback Control of a Deep Drawing Process Multiobjective Optimization of Single Point Incremental Forming: Comparison between Isotropic and Combined Hardening Behavior The Influence of Temperature on Zinc Abrasion in Deep Drawing Processes The Multi-Breakage Phenomenon in Air Bending Process Phase Transformation and Microstructural Behavior of New Steel Grades for Hot Sheet Stamping Roller Hemming Simulation: State of the Art and Application Limits Surface and Microstructure Considerations in High Speed Single Point Incremental Forming of Ti6Al4V Sheets Hot Single Point Incremental Forming of Ti-6Al-4V Alloy Approach for Implementation of Short Cycle Stretch Forming (SCS) to Cupping Processes Influence of Tooling Material and Temperature on the Final Properties of Tailor Tempered Boron Steels Forming Limit Extension of High-Strength Steels in Bending Processes The Effects of Shape and Tool Material on Aluminum Sheet Spinning Electromagnetic Formability of an Aluminium Ice Tray Numerical and Experimental Study of Preforming Stage in Tube Hydroforming An Experimental Investigation of Parameters Influencing Dimensional Accuracy in Rotary Stretch Bending Chapter 12: Machining and Cutting Development of Hole Making Technology of Bi-Layer Composite Materials Consisting of CFRP Laminates and Titanium Alloys Prediction of Post-Machining Distortion Due to Residual Stresses Using FEM and a Massive Removal Approach Cutting Force Model in Milling of Carbon Fiber Reinforced Plastic Experimental Comparison between Traditional and Cryogenic Cooling Conditions in Rough Turning of Ti-6Al-4V Comparison between Wrought and EBM Ti6Al4V Machinability Characteristics Identification of Friction Law to Model Orthogonal Cutting Fitting of Constitutive Material Parameters for FE-Based Machining Simulations for Functionally Graded Steel Components Effects of the Flow Stress in Finite Element Simulation of Machining Inconel 718 Alloy Influence of Cutting Parameters and Tool Geometry on Cutting Forces and Damage on 2D and 3D Carbon/Epoxy Composites in Drilling Numerical Simulation of Workpiece Thermal Field in Drilling CFRP/Aluminum Alloy Residual Stresses in Machining of AISI 52100 Steel under Dry and Cryogenic Conditions: A Brief Summary The Effects of Cutting Conditions on Surface Integrity in Machining Waspaloy Thermo-Mechanical Behaviour of Spheroidal Graphite Iron Experimental Research of Micro-Textured Tool for Reduction in Cutting Force Wearing Evaluation in Nickel Super-Alloys Turning for the Development of a Predictive Model for CAM Optimization On the Flow Stress Model Selection for Finite Element Simulations of Machining of Ti6Al4V Experimental Analysis of Milling Operations in Ti-6Al-4V and Co-28Cr-6Mo Alloys for Medical Devices Methods to Decrease Cut Edge Sensitivity of High Strength Steels Chapter 13: New and Advanced Numerical Strategies for Material Forming Weak Formulations with Upwind Shift for Calculation of Free Surface Corrections and Simulation of Steady-State Forming Problems A Discontinuous Galerkin Method for Multiphysics Welding Simulations Online Prediction of Machining Distortion of Aeronautical Parts Caused by Re-Equilibration of Residual Stresses Fast Plastic Integration Algorithms for Forming Process Simulations Modelling of Inertia Friction Welding Using Finite Element Analysis and Computational Fluid Dynamics An Object-Oriented Analysis of Complex Numerical Models Methods for the Numerical Modelling of the Adhesive Interlayer of Sandwich-Sheets in Case of Coupled Thermo-Mechanical FE-Analysis Elastic-Plastic Reduced Order Modelling of Sheet and Profiles Bending-under-Tension Chapter 14: Inverse Analysis Optimization and Stochastic Approaches Automatic Parameter Classification for Dimension Reduction as Basis for Robust Parameter Identification Data Exploration Approach Versus Sensitivity Analysis for Optimization of Metal Forming Processes Nickel Superalloy Components Surface Integrity Control through Numerical Optimization A Fast Approach to Shape Optimization Using the Inverse FEM Chapter 15: Innovative Joining by Forming Technologies Basic Investigations of Non-Pre-Punched Joining by Forming of Aluminium Alloy and High Strength Steel with Shear-Clinching Technology Friction Stir Lap Welding of Aluminium Alloys Influence of the Process Temperature on the Properties of Friction Stir Welded Blanks Made of Mild Steel and Aluminum Unerring Planning of Clinching Processes through the Use of Mathematical Methods Friction Stir Welding of Aluminum Metal Matrix Composite Containers for Electric Components New Die Concept for Self-Pierce Riveting Materials with Limited Ductility Galvanic Corrosion Related to Steel/Aluminum Dissimilar Joining Tailored Blank A New Process Chain for Joining Sheet Metal to Fibre Composite Sheets Ti 6Al-4V FSW Weldability: Mechanical Characterization and Fatigue Life Analysis Effect of Cold Plasma Treatment on Surface Roughness and Bonding Strength of Polymeric Substrates Inverse Analysis of Forming Processes Based on FORGE Environment Forming of Automotive Parts with Nuts Clinch Process in Comparison to Welding of Nuts Experimental and Numerical Study on Linear Friction Welding of AA2011 Aluminum Alloy Hierarchical Metamodeling: Cross Validation and Predictive Uncertainty 3D Numerical Simulation of Friction Stir Welding of Lap Joints Using an Arbitrary Lagrangian Eulerian Formulation Chapter 16: Heat Transfer Modelling Numerical Investigation of Temperature and Phase Development of (Deformation-) Dilatometer Specimens Thermal Study of Hot Stamping with Heated and Cooled Tooling to Obtain Tailored Properties CFD Simulation of Heating a Cu Pipe with a Safe H2/O2 Flame Thermal Modeling in Composite Transmission Laser Welding Process: Light Scattering and Absorption Phenomena Coupling Profile Strip Casting with Inline Hot Rolling: Numerical Simulations for the Process Chain Design Experimental Study on the Identification of the Saturation of a Porous Media through Thermal Analysis Thermomechanical Effects in PVTα Measurements Chapter 17: Semi-Solid Processes Friction Stir Processing Multi-Run Modification of Cast Aluminum Alloy An Investigation of Phase Crystallinity in Laser Modified Yttria Stabilized Zirconia (YSZ) Thermal Barrier Coating Numerical Investigation of the Hot Isothermal Process and Force Size-Effect of a Clutch-Half Forming Numerical Investigation of the Plain-Strain Compression of a Spherical Shell Numerical and Experimental Investigation of Deep Drawing of Sandwich Panels Injection Tests and Effect on Microstructure and Properties of Aluminium 7075 Direct Thermal Method Feedstock Billets Rheology of Blast Furnace Slags with Defined Concentrations of Titanium Oxides FEM Analysis for Tangible Component Production Chapter 18: Integrated Design, Modelling and Reliability Assessment in Forming (I-DMR) Modelling of Thermoset Matrix Composite Curing Process Numerical Modeling of AA2024-T3 Friction Stir Welding Process for Residual Stress Evaluation, Including Softening Effects Development of a Numerical Chain to Optimize Railway Axles with Respect to Fatigue Damage Development of a Tool Design Method in Cross Wedge Rolling: Description and Applications Investigation of High-Strength Steel Component Subjected to Stretch-Bending: Effect of Forming History Identification of Anisotropic Yield Criterion Parameters from a Single Biaxial Tensile Test Influence of Friction Stir Welding Effects on the Compressive Strength of Aluminium Alloy Thin-Walled Structures Optimal Sensor Locations for Polymer Injection Molding Process An Optimized Loading Path for Material Parameters Identification in Elastoplasticity Influence of a Tensile Pre-Strain on Bending of Aluminium Alloy Chapter 19: Computational Techniques and Multi-Scale Methods for Composites, Metallic Sheets and Coating Models Testing and Modeling of Roll Levelling Process The Effect of Product Size on the Pulling Force in Pultrusion Constitutive Modeling Based on Evolutionary Multi-Junctions of Dislocations Plastic Slip Patterns through Rate-Independent and Rate-Dependent Plasticity Experimental Chemo-Mechanical Characterization and Multiscale Modeling of the Alloys Al1050, Al2024 and Al5754 On the Use of Explicit and Implicit Exponential Map Algorithms of Finite Strain Combined Hardening Plasticity in the Simulation of Draw Bending Numerical Investigation for Evaluation and Prevention of Casting Defects in TiAl Alloys


Best Sellers


Product Details
  • ISBN-13: 9783038351061
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1900
  • Spine Width: 95 mm
  • Width: 170 mm
  • ISBN-10: 3038351067
  • Publisher Date: 01 Jul 2014
  • Binding: Paperback
  • Language: English
  • Series Title: Volumes 611-612 Key Engineering Materials
  • Weight: 3050 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Material Forming ESAFORM 2014: (Volumes 611-612 Key Engineering Materials)
Trans Tech Publications Ltd -
Material Forming ESAFORM 2014: (Volumes 611-612 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Material Forming ESAFORM 2014: (Volumes 611-612 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!
    Your IP: 216.73.216.220 IN