Engineering and Manufacturing Technologies
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Mechanical engineering > Engineering and Manufacturing Technologies: (Volumes 541-542 Applied Mechanics and Materials)
Engineering and Manufacturing Technologies: (Volumes 541-542 Applied Mechanics and Materials)

Engineering and Manufacturing Technologies: (Volumes 541-542 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from the 2014 5th International Conference on Mechanical, Industrial, and Manufacturing Technologies (MIMT 2014), March 10-11, 2014, Penang, Malaysia. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 291 papers are grouped as follows: Chapter 1: Materials Science: Technology, Processing and Applied Research, Chapter 2: Electronics and Integrated Circuits, Electrical Engineering and Applications, Chapter 3: Mechanics, Tools and Mechanical Engineering: Technology, Design and Applied Research, Chapter 4: Power and Energy: Engineering and Applications, Chapter 5: Robots and Manipulators, Chapter 6: Control Systems, Chapter 7: Measurement, Testing, Monitoring, Detection: Technologies, Analysis and Methodology, Chapter 8: Manufacturing and Industrial Engineering: Management Applications

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Materials Science: Technology, Processing and Applied Research Random Characteristics on Cutting Interpenetrating Network Composites Aluminum Pigments Encapsulated by MTES and TEOS for Corrosion Inhibition and their Characterizations The Deformation Behavior of Thermal Compression for ZK30 Magnesium Alloy A Preliminary Study on the Effect of WEC Cleaner Papermaking Chemical on the Improvement of Paper Physical Strength Microstructure and Properties of 8YSZ with High Component BAS Research of Compression and Energy Absorption Characteristics of Polyimide Foam The Spherical Copper Nanoparticle Grown at Water-Immiscible Interface of Castor Oiled Graphite-Epoxy Solid Electrode Surface Investigation of the Solubility and Absorption Rate of CO2 in PZ Promoted K2CO3 Aqueous Solution Study on Effect of the Ternary Composite Retarder on Properties of FGD Gypsum Plaster Material Effect of Sodium Alginate on the Properties of Composite Protein Films Preparation and Study on the Performance of Polymer-Modified Cement-Based Composite Insulation Materials Study on the Corrosion Resistance Behavior of Multi-Elements Alloy CoCrFeNiTi0.5 Preparation and Study on the Waterproof Performance of Polystyrene Lightweight Composite Insulation Materials Development of Multifunctional Nanomaterials in Phototherapy Viscosity of Dimethylbenzene in [Bmim][BF4] and [Bmim][PF6] Ionic Liquids The Influence on the Hardness and Form of U75V from the Different Cooling Rates Improvement of Polymers by UV Irradiation: The Research in Ageing and Solidification - Take Polysiloxane-Modified-Polyacrylates and Asphalt as an Example Preparation of Terephthalic Acid (TPA) and Dioctyl Terephthalate (DOTP) by Anthracite's Alkali Oxygen Oxidation Study on the Preparation and Properties of Desulfurization Gypsum-Based Self-Leveling Material The Preparation of Red Mud Foam Lightweight Thermal Insulation Material Autothermal Reforming of Ethanol for Hydrogen Production: Modeling and Simulation Study on the Vacuum Insulation Panel Protected by Silicone Rubber Influence of CaF2 on the Formation Kinetics of Belite-Calcium Barium Sulphoaluminate Cement Clinker Influence of Limestone Powder on the Performance of Cementitious Materials CO2 Fixation Using MEA and CaCl2 Aqueous Solutions Synthesis and Performance Evaluation on Amphoteric Surfactant of Dodecyl/Tetradecyl Phosphobetain Effect of Material Constitution on the Properties of Thermal Insulation Materials Study on the Formation of C3S Doped with SO3, BaO and MgO Gas Sensors Fabricated by Aerosol Deposition Effects of Titanium Oxide Precipitate on Acicular Ferrite Nucleation in Carbon Structural Steel A Study of Morphology of Titanium Powder Used in Electron Beam Melting Study on Preparing Coating for the Anti-Erosion Property of Artillery Mineral Composition and Performance of Phosphoaluminate Clinker with Addition of SO3 Error Analysis of Natural Vibration Characteristic of the Diamond Wire Saw Research on the Decoating Effect and Microstructure of Surface Damage of High-Pressure Waterjet Synthesis, Characterization and Property of Nano Rare Earth Terbium Complex with Gatifloxacin Production of Phenolic Compounds from Low Temperature Catalytic Fast Pyrolysis of Biomass with Activated Carbon Performance Evaluation of Polymer Microspheres for Profile Control and Oil Displacement The Influence of Heat Treatment on the Interface and Properties of Mo2FeB2 Cermets-Steel Clad Material Determination of Tricalcium Silicates Crystal Forms in Belite-Barium Calcium Sulphoaluminate Cement Study on Sucrose Powder in Selective Laser Sintering Mechanism The Relationship between the Hydrolysis Degree and Calcium-Binding Capacity of Whey Protein by Enzymatic Hydrolysis Microscintillator of Ce Doped β-NaLuF4in Uniform Hexagonal Prism Morphology by a Facile Hydrothermal Method The Preparation of a New Type of Pectin Capsules Replacing Gelatin Capsuales Raman Study on the Crystallization Characteristics of Amorphous Ge2Sb2Te5 Film Strength Prediction of Double-Lap Woven CFRP Bolted Joint Incorporating Material Softening W-Cu Nano-Composite Powders Prepared by Hydrothermal Method Study on Effect of Matrix Properties on Fatigue Damage Initiation of Woven Carbon Fabric Vinylester Composites Studies on the Way of Obtain C2H3+ by C5H8O+Small Fragments Calculation Blinking in Photoluminescence of InGaN Devices is Caused by Slow Beating of THz Vibrations of the Quantum Well Taguchi Grey Relational Analysis of Dry Sliding Wear Behaviour of Annealed AA7075-TiC Metal Matrix Composites Effect of Heat Treatment on Wear Behavior of Hot Extruded AA7075 - 4%TiC In Situ Metal Matrix Composite Deep Drawing and Bulging Processes of Hard-Deformed Light Alloy Sheet with Resistance Heating Effect of Water Reducer and Cellulose Ether on Sulphoaluminate Cement-Based Lightweight Thermal Insulation Board 2124 Aluminum Alloy Aging Forming Springback Study Based on a Combination Forecasting Method The Anti-Bending Performance Study of Loaded Continuous Beam that Strengthened with Prestressed Laterally Bonded Carbon Fiber Sheets Investigation of Blends of sPS/B30, B30/iPP and sPS/iPP/B30: Mechanical and Thermal Properties Characterization of Spray Angle and Velocity in Water-Mist Nozzle by Using Response Surface Approximation Mechanical Analysis for Thin-Walled Stiffened Plates on the Base of Plants Venations Growth Algorithm Study about the Effects of Cryogenic Treatment on the Mechanical Properties of PCrNi3MoVA Steel Mechanical Behavior Research of Recycled Concrete Small-Sized Hollow Block Based on Load Test The Beryllium Bronze for Capacitance Sensitive Accelerometer Modeling and Control Techniques for Microstructure Development Composition Characteristics of Reconstructed Steel Slag with Electric Furnace Slag Stabilization of Multiple Heavy Metal Contaminated Soils Using Biological Materials Study on the Recovery of Sulfur from a Lead-Zinc Tailings of Fujian The Research of Biomass Biodegradable Material Microstructure Impact on Performance Biomass Biodegradable Starch Material Cushioning Packaging Products and Plasticizing Properties of Compatibility Comparative Study of Squeeze Casting of AA6061 with and without Employing Ultrasonic Cavitations Multi-Response Optimization of CNC WEDM Process Parameters for Machining Titanium Alloy Ti 6AI-4V Using Response Surface Methodology (RSM) Process Factor Optimization for Reducing Warpage and Shrinkage in Injection Molding Using Design of Experiments Performance of Brazed Carbide End Mill Tool for Machining of Ti6Al4V Experimental Investigations on the Effect of Vegetable Based Cutting Fluid in Turning AISI 1040 Steel Determination of Isosteric Heat and Entropy of Sorption of Air Dried Sheet Rubber Using Artificial Neural Network Approach Giant Permittivity of Barium Titanate Prepared by Ultra-Fast Sintering Method Experimental Study on Superficial Modification of Recycled Aggregate with Fly Ash Influence of Foaming Agent on Properties of Red Mud Lightweight Baking-Free Brick Effect of Minimum Quantity Lubrication when Turning a Steel Grade Microbial Oil Production from Lignocellulosic Biomass – Recent Development and Prospect An Overview of the Mechanism of Non-Metallic Materials for Energy-Saving and Environment-Protection Winding Trajectory Generation for Composite Products Chapter 2: Electronics and Integrated Circuits, Electrical Engineering and Applications The Design and Test of Durability Test Platform for Small Scale Electromotor The Design of Active Low Pass Filter Driveline Simulation of 2013 Formula Student Electric Racing Vehicle Development of a New Pulse Discriminating System for Micro Electro Discharge Machining (μEDM) Circuit Design of High Reliability Pulse Driver for Relay Control Capacity Optimization of Steinmetz Compensation Circuit for Electrification Railway Unbalance Controll The Application of Phase-Locked Loop Frequency Tracking in the Intelligence-Type Induction Heating Power Supply The Coupling Effect of Electromagnetic Pulse and Computer Design and Analysis of UHF RFID Tag Antenna on the Surface of Cylinder Control of Cascaded H-Bridge STATCOM for Load Compensation Design of Arbitrary Waveform Generator Based on Direct Digital Synthesis Technique Using Code Composer Studio Platform Design Sheet Beam Gun for THz Traveling-Wave Tube A New Hybrid SSD Architecture Based on SLC and MLC Resonance Frequency Calculation of Long-Neck Cylindrical Acoustic Resonators Analysis of Novel OLED Based Four-Primary Displays Identification Parameters with Neural Network for Preisach Hysteresis Model A Fast Digital 3D-SVPWM Algorithm for Four-Leg Converter Chapter 3: Mechanics, Tools and Mechanical Engineering: Technology, Design and Applied Research Stress and Modal Analysis for Rear Axle Housing of Mining Scraper The Floquet Analysis of Liquid Interface Wave in a Double-Frequency Excited Cylindrical Container The Body Structural Optimization Based on Safe Side Impact Simulation Analysis and Optimization Design of Double-Wishbone Independent Suspension Research and Development of Steel Casting CAD/CAE Integration Technology Based on the Neutral STEP File The Research of Remanufacturing Technology Applied to Lifting Machinery Many-to-Many Regression Analysis of Loading Characteristic in Dieless Tube Hydroforming The Method of Transforming Ordinary Machine Tools to Ultrasonic Vibration Deep Hole Drilling Machine Tools Fault Diagnosis Method of Mini Excavator Slewing Bearing The Oil Spill Analysis and Structure Improvement of Marine Sliding Bearing Optimization Design of Rectangular Cross-Sectional Wire Race Ball Bearing Numerical Flow Simulation in a Horizontal-to-Vertical Elbow Experimental and Numerical Investigation of Circular Arc Dovetail Attachments under Fatigue Loading Strength Safety Coefficient and Fatigue Life Analysis of Coupling Diaphragm Based on FE-Simulation Research on Racing Loss of a High-Power Hydraulic Retarder Analysis and Research of the Technology Based on Carbide Tool Passivation The Study on the Wear Characteristics of Flank Lock Type Precision Locknut in the Dynamic Conditions The Study on the Variation of Friction Coefficient of Flank Lock Type Precision Locknut at the Different Tightening Speed High-Cycle Fatigue P-S-N Curve Estimating Method Based on Maximum Likelihood Method for Turbine Coupling Bolt Materials Statics Analysis on Sail Structure for Ocean-Going Ships Research on Functional Similarity and Structural Similarity of Mechanical Components Numerical Investigation on Aero-Thermodynamic Characteristics of Wedge Shaped Nose Cone of Near Space Supersonic Flight Experimental Investigation of Vibration Characteristics for Vapor Cavitation in Plain Journal Bearing Research on CAD/CAE System of Gate Valve Based on UG Effect of Helical Screw Tape Insertion on Heat Transfer and Pressure Drop Characteristics in a Horizontal Concentric Double Tube Heat Exchanger Experimental Investigations of Single and Multi-Fault in Rotor System A Brief Review on Fault Diagnosis of Rotating Machineries The Influence of Front Support on Vibration Behaviors of TBM Cutterhead under Impact Heavy Loads The Performance of TFC Slider under Second-Order Discontinuous Boundary Conditions Analysis of Detecting Multi Crack with Location and Size in Simply Supported Shaft Using ANFIS The Numerical Analysis of the Velocity and Pressure Distribution of the Oil Film in Heavy Hydrostatic Thrust Bearing Application of Taguchi Design of Experiment Method in Optimization of Izod Impact Testing Multi-Objective Structure Optimization Design on the Upper Carriage of a Naval Gun Anti-Slosh Effectiveness of Baffles and Braking Performance of a Partly-Filled Tank Truck Research of Agricultural Machinery Modeling Method Based on Virtual Reality An Experimental Investigation on Transpiration Cooling for Supersonic Vehicle Nose Cone Using Porous Material Dynamic Response Analysis of Motorcycle Fenders Dynamic Simulation of the Stack-Manipulator to Aluminum-Ingot Based on ADAMS The Simulation of Stack-Manipulator to Aluminum-Ingot Based on ADAMS Modeling and Simulation of Wire Electrode Deflection in WEDM Numerical Simulation of Particle Impact Erosion within Electric Submersible Pump Based on Fluent The Summary Research on the Noise of High-Speed Traction Elevators Method of Ginkgo biloba Drying and Drying Machine Design Modeling, Simulation and Design Optimization of a Series Hydraulic Hybrid Vehicle Movement Simulation of NC Lathe Machine Based on EON Studio Research and Control for Inertia of Automobile Steering Test System Development of Piezo Driven Motion Amplified Stage Study on Development of a Urea-SCR System of Diesel Engine Experimental Investigation and Numerical Simulation for High Temperature Air Source Heat Pump with New Mixed-Refrigerant Simulation Study on the Combined Harvester with Four Tracked Feet Passing through Ditch Based on RecurDyn Simulation Investigation about Combustion and Emission Characteristics of n-Butanol/Diesel Fuel Mixture on Diesel Engine The Design and Research of Automatic Charging Parking Space A Simple Optical Coupling Method for Water-Jet Guided Laser Machining System Analytical Method for Obtaining Cut Geometry of Helical Toroidal Cutter during Semi-Finish in 5-Axis Milling Machining Evaluation of High-Speed Milling for Thin-Wall Machining of Al7075-T651 Effect of Changing the Position of Tool Point on the Moving Platform on the Kinematics of a 3RRR Planar Parallel Manipulator Analyzing the Vibration of Warp Yarns in Lengthwise and Crosswise Development of Post Processor for Dual-Spindle Turning Center Synthesis of Planar Four-Bar for Generating Path with Prescribed Arc The Modified Quadruple-Tanks Process: A Flexible Mathematical Model with an Adjustable Simulink Block A Modified Distributed Tuned Mass Damper Design Approach A Study on Conventional versus Independent Suspension System of an Automobile Simulation of TBM Mucking Process Based on the Ballast Fluidity Quantitative Mixing Analysis of Laminar Flow in Circle Grid Perforated Plate with 50% Porosity Static Mixer Finite Element Analysis of a Mud Pump Damming Machine Frame Design and Kinematics of a Cable-Driven Humanoid Ankle Joint Symmetrical Pneumatic Muscle Actuated Gripper System with Two Mobile Jaws Parameters Analysis of Bracing Structure with Friction Energy Dissipation System Chapter 4: Power and Energy: Engineering and Applications Study on a Quantitative Risk Assessment Method of Primary Equipments Based on Power Grid Safety Analysis A Comprehensive Evaluation Method on Dynamic Simulation Accuracy of Power System Study on the Practical Connection Mode of Microgrid Adapting to Dual Power Supply Study on the Different Dynamic Models and its Simplified Standards of the PWR Neutron A Comparative Study on Solar Refrigeration Technology Modeling and Practice of Wind/PV/Pumped-Storage Hybrid System Environmental Turbulence Analysis of the Wind Power Industry Chain Component Characteristics of Coal-Based Jet Fuel and Petroleum-Based Jet Fuel Present Situation of Exploitation and Utilization of Geothermal Resources in China Safety Study of Primary Loop System of Civil Marine Nuclear Power Plant Heat Integration of Solid Oxide Fuel Cell System Status of Unconventional Oil and Gas Resources and its Environment Risk Factors in China Reliability Evaluation of Generation and Transmission Systems Considering the Effects of Wind Farm The Research Progress on Biomass Fuel Reburning The Combined Solar with a Dual Heat Source Heat Pump Applied in a Greenhouse Heating System - An Operation Optimization of Water Source Heat Pump Optimization of Pyrolysis Technical Parameters for Cotton Stalk Based on Response Surface Methodology Potential Analysis of Architectural Application of Solar Energy Resource in Panzhihua Design of Desalination Reverse Osmosis System Power-Supplied by PV and Wind Energy Integrated AHP-BPNN Model for Wind Farm Investment Evaluation Wind Energy Resource Assessment at Tindouf Region, Extreme Southwest of Algeria A Novel Adaptive Protection Scheme for Microgrid Study on Combustion and Emission Characteristics of Acidic Oil Biodiesel The Design and Implementation of PV Inverter for Grid-Connected System Base on SVPWM Study of Heat Losses from Cylindrical Cavity Receiver of Solar Concentrator Progressive Study of GIS Based Land Suitability for Wind Farm in the South Wales Area in UK via GIS Chemical Kinetic Mechanism Reduction Scheme for Diesel Fuel Surrogate Analysis of Spherical Cavity Receiver of Solar Concentrator for Heat Losses Drying Modeling and Energy Consumption of Air Dried Sheet (ADS) Rubber by Solar and Biomass Energy Open Fault Characteristics and Simple Diagnosis Scheme in a Back-to-Back Converter for Wind Power Conversion A New Backward/Forward Algorithm for Weakly Meshed Distribution Systems with Distributed Generation Innovative Development of Non-Contact Torque Sensor Applied to Wind Generator Chapter 5: Robots and Manipulators Dynamic Modeling Based on Screw Theory and Lagrange’s Equations of a 3-DOF Cable-Driven Surgical Instrument An Optimized Design of Humanoid Robot Distributed Control System Posture Control of a Reconfigurable Mobile Vehicle with Legged Mode Optimization of Fuzzy Logic Controller Using PSO for Mobile Robot Navigation in an Unknown Environment Research on the Fault Diagnosis Method of the Reconfigurable Modular Robot Based on Second-Order Sliding Mode Observer A New Design of Circular Li-Ion Battery Sorting Equipment Based on High-Speed Robot Dynamic Obstacle Avoidance Algorithm for the Mobile Robot Based on Depth Image of Kinect Sensor Bigtoe Sizing Design of Small Biped Robot by Using Gait Generation Method Design and Kick Analysis of a Soccer Playing Robot Design and Control of a Cleaning Unit for a Novel Wall-Climbing Robot Design and Control of a Dexterous Anthropomorphic Five Fingered Robotic Arm Design of a PD Controller Combined with a MRAS-Based LFFC for a Two - Link Robot Manipulator Collision Free Control of Variable Length Hyper Redundant Robot Manipulator Research on Control System of Intelligent Creel Multi-Robot A Robot Presenting Reproduced Stories among Older Adults in Group Conversation Architectural System Design of Six Channels Compact Fuzzy Logic Controller for Arm Robot Joints Using FPGA Technology Design and Control of a Waterproof Robot Arm Applying the Gravity Compensator Inverse Solution and Optimal Concept Rethink from Human Operation to Industrial Redundant Manipulator Development of Transfer Robot Using for Small Size Flat Panel Display Manufacturing Process A Review on Lower-Limb Exoskeleton System for Sit to Stand, Ascending and Descending Staircase Motion Chapter 6: Control Systems Guided Rocket Control System Design Based on Discrete-Time Adaptive Sliding Mode Finite-Time Formation Control for Autonomous Underwater Vehicles Based on Hierarchical Leader-Follower Study on Control Strategy of the Hydro-Mechanical Variable Transmission Modeling and Control Research for Fuelcell Supercapacitor Hybrid Powertrain Bus-Clamping Based Improved Discrete Duty Ratio Control Technology of Direct Torque Control for Induction Motors Control System Design of Air Compression Double-Bubble Foaming Machine The Hydraulic System of Intelligent Asphalt Disperser Based on Neural Network Internal Model Control Bioreactor Substrate Feeding Control Using DO Stat Control Strategy: A Modeling and Computer Simulation Study Research on Characteristics and Key Design Parameters of a Pilot-Assisted Load Control Valve Design of a Load Lift PLC Control System Controlling Chaos by Bounded Self-Controlling Function Using Butterworth Filter Feedback Application of GPC Algorithm in Level Control System Tuning of PID Controller for the Integrating Systems Comparison of Servo Positioning Performance of Pneumatic Cylinders Using Proportional Valve Method and PWM Control Method Application of Fuzzy Adaptive PID Control for Rotor Side Converter of DFIG Based WPGS Research of the Servo Motion Control of Wave Maker A Design of Control Strategy for Chaotic Systems with Time-Delay Adaptive Fuzzy Controller Design for Dynamic Positioning System Biomass Boiler Drum Water Level Control System Using Neural Networks Characteristics Analysis of Proportional Control Valve on Vane Damp The Research and Application of AGC in Circulating Fluidized Bed Unit Design and Application of IC Card Paid Water Wells Remote Monitoring System Chapter 7: Measurement, Testing, Monitoring, Detection: Technologies, Analysis and Methodology The Optimal Design of the New Tube Inside and Outside Differential Pressure Flow Meter Two-Phase Flow Field Numerical Simulation in Scrubber for Exhaust Gas Desulfurization Design and Implementation of Fault Detection Equipment of Certain Type of Microwave Range Finder Indoor Human Detection and Monitoring System Using PIR Wireless Sensors Array Modeling and Simulation of Engagement Process of Antiaircraft Missile for Training Simulation A Secure Wireless Telehealthcare Monitoring System and its Web Application Study on Star Shot Analysis for Physics Quality Assurance in Radiotherapy Necessary and Sufficient Condition on Controllability and Reachability of Fractional-Order Linear Switched System The Additional Side Force on the Force Transducer in the Combinatorial Load Cell Numerical Simulation Research of Velocity and Temperature Fields in High Temperature Flow of Liquid Lend-Bismuth Eutectic System Design of Greenhouse Temperature and Humidity Monitoring and Alarming Monitoring and Management of Source Water Pollution Based on a New Bio-Optoelectronic System in Jinan, China Aluminium Self-Piercing Rivet's Failure: Testing and Numerical Analyses The Measurement Method of Echo Highlights in Low Frequency Three-Dimensional Numerical Simulation of the Mechanism of Armour-Piercing Bullet Attacking on the Target Temperature Drifts Compensation of Strain-Temperature Method for the Measurement of Continuous Welded Rail Temperature Force Study on Key Technology for Local Installation of Protection and Monitoring Device at Low Temperature Analysis the Thermal Field for the Liquid Floated Gyroscope and it's Simulation Aircraft Free Flight Simulation in a Wind Tunnel Comparison of FLAASH and 6S Code Atmospheric Correction on Snow Cover Detection in Akita Prefecture, Japan Using MODIS Imagery Data Monitoring Bicycle Riding Motion with Multiple Inertial Sensors Experimental Study of Suppressing Vertical PS Fires Using Water Spray A New Method for Evaluating the Profile of Large Paraboloidal Antennas An Introductory Review of Mechanical Reliability Testing Face Milling Tool Wear Condition Monitoring Based on Wavelet Transform and Shannon Entropy Stability of Online Monitoring Stress for Shipbuilding Portal Crane Detection and Tracking of Vehicle Target Based on Super-Resolution Reconstruction and Variable Template Matching Performance Study of Solar Trough Tracking Control System Three Modeling Methods Application in Near-Infrared Spectra Analysis for Determination of Volatile in Lignite Coal Samples A Gas Pipeline Leakage Diagnosis of Fusing BP Neural Network Basing on WSN and D-S Theory Study on the Parts Surface Defect Detection Method Based on Modifed SVM Algorithm Joint Transmit Antenna Selection and Artificial Noise for Security in MIMO Wiretap Channels An Agent-Based Load Balancing Approach for RFID MiddleWares UHF RFID Localization Based on Phase Map Multi-Hierarchical Functional Directed Graph Modeling Method for Aircraft System Fault Diagnosis Mixed Integer Linear Programming for UAV Trajectory Planning Problem Coupled CFD/GNC Modeling for the Basic Finner Projectile with Closed Loop Feature Extraction for Bearing Prognostics Based on Continuous Hidden Markov Model Position Estimation in Singly-Fed Electrostatic Actuation Systems by Superposing Sensing Signals The Supporting Scheme Selection of Deep Foundation Pit Based on Fuzzy Optimization Theory Implementation of the Dynamic Tension Load of Cell Membrane and its Stress Analysis Chapter 8: Manufacturing and Industrial Engineering: Management Applications Modeling and Analysis of the Manufacturers Inventory in Closed-Loop Supply Chain Research on Reliability Analysis Method of Industrial Control System Based on Markov Process Robust Design – A Case Study in a Research and Development Company Research of Prediction Model of Operating Condition of Loom Research on the Application of EPC Encoding Technology for Plastic Windows Manufacturing Manufacturing Technology Impact on Environmental Factors and Manufacturing Performance Using the Modified Regression Analysis to Estimate Industrial Competitiveness – The Case of Banks in Tanzania Enhancing Ceramic Product Value through Appropriate Production Techniques Design of Flexiable Manufacturing System Based on Practical Application of Engineering Training The Electric Vehicle Development: Experiences Aboard and Enlightenment to China Modeling and Analysis of the Bullwhip Effect in Remanufacturing Closed-Loop Supply Chain


Best Sellers


Product Details
  • ISBN-13: 9783038350552
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Height: 240 mm
  • No of Pages: 1224
  • Spine Width: 61 mm
  • Width: 170 mm
  • ISBN-10: 3038350559
  • Publisher Date: 05 Jun 2014
  • Binding: Paperback
  • Language: English
  • Series Title: Volumes 541-542 Applied Mechanics and Materials
  • Weight: 2310 gr


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Engineering and Manufacturing Technologies: (Volumes 541-542 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Engineering and Manufacturing Technologies: (Volumes 541-542 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Engineering and Manufacturing Technologies: (Volumes 541-542 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!