Engineering Decisions for Industrial Development - Bookswagon
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Mechanical engineering and materials > Mechanical engineering > Engineering Decisions for Industrial Development: (Volume 733 Applied Mechanics and Materials)
Engineering Decisions for Industrial Development: (Volume 733 Applied Mechanics and Materials)

Engineering Decisions for Industrial Development: (Volume 733 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from the 2014 International Conference on Energy Science and Applied Technology (ESAT 2014), December 20-21, 2014, Daqing, China. The 223 papers are grouped as follows: Chapter 1: Technologies in Geology, Mining, Oil and Gas Exploration and Exploitation of Deposits; Chapter 2: Renewable Energy, Bio-Energy and Fuel Cell; Chapter 3: Materials and Chemical Technologies; Chapter 4: Environmental Engineering and Sustainable Development; Chapter 5: Construction and Structural Engineering; Chapter 6: Thermal Engineering, Researching and Designing of Machines and Mechanisms; Chapter 7: Power and Electrical Engineering, Mechatronics and Control; Chapter 8: Communications and Applied Information Technologies; Chapter 9: Applied and Computational Mathematics, Methods and Algorithms Optimization and Data Processing; Chapter 10: Engineering Management in Industrial Sector

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Technologies in Geology, Mining, Oil and Gas Exploration and Exploitation of Deposits Productivity Model and Production Decline Characteristics of Multi-Fracturing Horizontal Well Influencing Factors Analysis of Iron Ore Tailings Comprehensive Utilization Connotation of Iron Ore Tailings Comprehensive Utilization Horizontal Well Penetration Rate Increasing Technology in Sulige Gas Field The Study of High Capacity Channels Genesis and Formation Conditions in Block M Liaohe Oilfield Screening of Polymer-Producing Bacteria for Microbial Combination Flooding in Thick Oilfield The Law of Reservoir Property Change both before and after Water Flooding in Liaohe Oilfield Jixi Basin CBM Accumulation Condition Analysis Main Controlling Factors of Hydrocarbon Accumulation at Different Phases: A Study on the Main Fault Depression Zones of Central H Basin Research and Application of Multi-Slug and Equi-Fluidity Oil Displacement Mechanism Based on the Sedimentary Facies of the Low Porosity and Permeability Reservoir Water Flooded Layer Qualitative Interpretation Method Research of Retarded Acid Formula System of Putaohua Reservoir Research of the Impurities Causes in Water Injection Well in Longhop Oilfield The Experiment of Viscosity Loss Caused by the Polymer Flow along Transportation Pipeline The Study of the Relationship between the Thickness Combination of the Well and Liquid Production per Unit Thickness Experimental Study on Improving the Rate of Antimony Ore Grade and Recovery of Mineral Processing The Control of Palegeomorphology on Sedimentary Systems in Southeast Qianjiang Depression, Lower Xingouzui Formation, Jianghan Basin Hydraulic Fracturing Optimization of Offshore Horizontal Well Based on the Optimal Proppant Index The Local Structure Research on the Nanpu 5th Construct Sequence Stratigraphic Characteristics of Damoguaihe Formation in the North of Wuerxun Sag The Type and Characteristics of the First Member of Nantun Formation’s Sedimentary Facies in Wunan Sub Depression The Application of Facies Modeling Combination of Well Data and Seismic Data in G25-12 Block Analogy Analysis of Coalbed Methane Reservoir-Forming Conditions in Jixi Basin Favorable Areas Prediction in Jixi Basin The Application of Phase-Sensitive Detection Technology in the Lateral Logging The Tectonic Movement Intensity of Sanzhao Sag and the Influence on Oil Migration Application of Fractures Prediction Technology in Carbonate Rock Reservoirs The Uneven Settlement Cause and Settlement Prediction of Xi Ying Sluice The 3D Visualization of Geological Modeling in Chengbei Oilfield Based on Phased Constraint Conditions Remote Sensing Prospecting Deposit Model Using Aster Data: A Case Study from Southern Part of Taxkorgan Tajik Autonomous County, China Application of Cementing Technology for Shale Gas Horizontal Well in Jiaoshiba Block of Fuling Area Organic Carbon & Nitrogen Stable Isotope Geochemistry of Anthraxolite from Different Fractures in Xiangxi, China The Accumulation Rules of Budate Burial Hill Hydrocarbon Reservoir of Suderte Oilfield in Hailar Basin The Slug Design of Multi-Slug and Equi-Fluidity Oil Displacement with Binary Flooding The Application of Dynamic Development Data in Low-Permeability Reservoir Water Flooded Layer Identification Application of Inverse Q Filtering Methods in the Near-Surface Compensation A New Parameterization Method for Large-Scale Reservoir History Study of Logging Curve Processing Methods in Nanpu 5th Structure Seismic Inversion Experimental Study on High Temperature-Resistant Gel for Profile Control Research and Application of the Ore Body Three-Dimensional Mathematical Model Based on Baiyang-Chuanxindong Ore Block in Bainiuchang Mine Simulation Experimental Study on Aeolotropism Affects the Recovery of Low Permeable Sub Layer Reservoir Methods of Fault Modeling by Well-to-Seismic Integration Density Logging Simulation on Enlarger Borehole in Anthracite Reservoir via MCNP Chapter 2: Renewable Energy, Bio-Energy and Fuel Cell Performance Analysis of Microbial Fuel Cells with Different Exoelectrogens at Low Temperature The Study on the Transesterification Catalyzed by Sodium Compound Loaded on Carbide Slag Analysis on the Fluctuation of Wind Power A Study of Photovoltaic Power Prediction Optimization Design of Solar Hot Water System of Splited-Type Villa Type Building The Research Progress of Earth to Air Heat Exchanger: A Review A Study of Distributed Photovoltaic Energy Storage Configuration Capacity The Effects of Initial Conditions on the Composition of the On-Board Fuel Reformation Chamber in an HCCI Engine Chapter 3: Materials and Chemical Technologies 3.5 G PAMAM-Stabilized CdS/Au Nano-Composites Prepared and Characterized Progress in Graphene-Based Two-Dimensional Heterostructures and their Photoelectric Properties Pyrolysis Kinetics of Oil Shale and its Kerogen Research and Development of Agent for Collecting Aluminum Dross Research on Migration of Lead in Food Wrap Paper Research on the Application Status of Giant Magnetostrictive Material in Drive Field Application Progress of Rare Earth Doping in Solid Electrolyte of Lithium Ion Battery Fabrication and Photoelectric Properties of La-Doped ZnO Nanofibers via Electrospinning Effect of Moisture on Physicochemical Properties of Cellulose Studied by Molecular Dynamics Influence of Niobium Addition in Iridium on High Temperature Plasticity Preparation and Detection of the Resolution and Number of Theoretical Plates for High Purity Steviosides Study on Preparation of Boric Acid with Boron Trifluoride Methanol Complex The Effect of Residence Time on Biomass Pyrolysis of Several in Different Temperature Nodes Preparation and Application of Basic Magnesium Chloride Whisker Investigation on Mechanical Properties and Microstructures of Resistance Spot Welded Aluminum-Lithium Alloy (5A90) Preparation and Characterization of Na7[CoCrW11O39(H2O)]·15H2O for Electrical Conductivity Chapter 4: Environmental Engineering and Sustainable Development Application of ICP-AES to the Detection of Heavy Metals in Cordyceps militaris from Shenyang Research on the Evaluating Method of Non-Renewable Energy Efficiency Based on China's Provincial Data: Green Growth Perspective Electric Power Industry Energy Conservation and Emission Reduction Policy Analysis The Evaluation of Low-Carbon Building Based in Whole Life Cycle Theory Three-Steps Allocation Model of Water Utilization Based on Synergy Theory: Take Y City for Example Study on the Variation of Landscape Pattern under the Influence of Hydroelectric Development: A Case Study of Madushan Hydropower Station, China Impact of the Brine Disposal on Scapharca Subcrenata Low-Carbon Culture Industry Development: The Design of Carbon Dioxide Capturing System for Liquor Cultural Industry The Change of Environmental in Sewage Sludge Compost The Present Situation and Development Trend of Sludge Disposal The Effects on Phosphorus Removal and Membrane Pollution by Adding PAC and Ca2+ into MBR under Different Dosing Methods Experiments of Combustion Adjustment on Boiler to Reduce NOx Emission The Predictive Analysis of the Energy Consumption and Environmental Emissions of Urban Passenger Transport of Beijing Evaluating the Regional Green Innovation Efficiency in China: A DEA-Malmquist Productivity Index Approach A Study on Early Warning Methods for Major Hazard of Hazardous Goods in Port Logistics Hub The Environmental Impacts and Ecological Recovery of Hydropower Development Emergency Treatment Research Based on Oil Monitoring System of Closed Water Ship Pollution The Inland Ship Anti-Pollution Present Situation and Suggestion Ground Features of Sea Land Breezes in Hainan Island A Typical Sea-Land Breeze Process in Hainan Island Study on the Relationship between Soil Nutrients and the Corn Yield Based on Grey System Theory Advances in Research of Botanical Insecticide The Reduction of Haze Weather in the Sight of Solid Waste Incineration Experimental Study on Removing NO from Flue Gas Using Microwave Irradiation over Activated Carbon Migration and Accumulation of Cadmium in Paddy Soil The Influence of Coal-Smoke Air Pollution on the Respiratory Health in Pupils Study on Regional Analysis of Reference Crop Evapotranspiration Based on SPSS Influence of Organic Loading Rate on the Process Imbalance of Anaerobic Digestion with Food Waste Research on Treatment of Rural Household Solid Wastes Some Numerical Simulations of Circulation in the East China Sea A Numerical Model of Circulation in the East China Sea Chapter 5: Construction and Structural Engineering On Fire Severity of Building in Performance-Based Design Research Strategies on Sustainable Building Design Study of Guizhou Province Guanling Daz-Hai Landslide Instability Process under the Rainstorm Study on Optimization of Anti-Seepage and Drainage System for High Concrete Sand-Gravel Dam The Numerical Simulation and Deformation Analysis to the Deep Foundation Pit of Diaphragm Wall Based on Midas/GTS The Nonlinear Finite Element Analysis of the Rigid Steel Column Base Connection with Anchor Bolt under Biaxial Bending Stability Bearing Capacity of Dendritic Arms in Tainter Gate Research on the Radial Gate Fluid-Structure Coupling of Hydraulic Steel Gate The Time to Eliminate the Expansion Joints of Diversion Pipeline in Wanjiazhai Hydropower Station Chapter 6: Thermal Engineering, Researching and Designing of Machines and Mechanisms Boiler Air Preheater Plugging Analysis of Grey and Related Problems Coal Water Slurry Gasifier Burner Service Life Analysis Numerical Simulation of Gas Pipe with High Temperature and High Pressure Based on the Research of Wind Turbine Vibration Performance and Aerodynamic Performance Comparative Research and Design of Precision Hill-Seeder with Whole Plastic-Film Mulching on Double Ridges Design of a Multifunctional Body-Building Rehabilitation The Analysis of the Static Mechanics for the Vehicle Frame The Heating Assembly Method and Application of Fall Off and Interference Fit Joint Flywheel Installing & Remolding of Air Gun Source to Research Vessel “Yanping 2” Influence of Air Distribution Modes on Boiler Efficiency Numerical Study of Dynamic Ground Effect of a Carrier-Based UAV The Research on Metal Milling about down Milling and Inverse Milling for Application Kinematics and Dynamics Analysis of a Micro-Robotic Platform Driven by Inertial-Force Propulsion The Design of Oscillating Hydrofoil Current Generation Device The Characteristic Research of Inertial Mechanism under the Condition of No Friction Contact Influence of De-Swirl Angle on the Flow and Heat Transfer in Rotor-Stator Cavity System The Finite Element Analysis and Optimization of the Hood Based on Hyperworks Numerical Investigation of Pneumatic Regulating on Low-Pressure Guide Vane Structure Design of and Numerical Simulation on an Annular Reverse Circulation Drill Bit An Experimental Flow Study of the Pitching Oscillating Airfoil Using the PIV Technique Temperature Field Analysis of LNG Tank under Ultra-Low Temperature Based on Finite Element Method The Portable Unit for the Online Measurement and Fitting of Large Curved Surface Improvement of Engine Coolant Ultrasonic Cavitation Apparatus The Research of Hydrodynamic Performance for Ducted Propeller with PBCF Applications of CFD Technique in the Flow Field Analysis of Road Sweeper Automobile Modeling Research Based on Numerical Simulation Finite Element Analysis of Frame of Dump Truck Numerical Simulation and Optimization of Small Low-Speed Wind Tunnel Contraction Flow Research on Heat and Mass Transfer of Flat Grooved Heat Pipes Research on Engine Fleet Management for Civil Aero-Engine Analysis and Research of Hydraulic Roof Bolter in Performance Testing Non-Contact Online Detection of Concentricity Error The Optimization of Group Panel-Type Radiator of Transformer Study on Improving the Empirical Formula of Calculating Francis Turbine’s Axial Hydro-Thrust Based on GT-Power Car Muffler Design and Development Chapter 7: Power and Electrical Engineering, Mechatronics and Control On the Motor Noise Testing System Based on LabVIEW Study of Bifurcation and Chaos in the Current-Mode Controlled Boost DC-DC Converter Design and Realization of a New Intelligent Capacitive Load Switch Study on Power Flow in Distribution Network with Photovoltaic Power The Design of Adaptive Ambient Noise Sound and Light Controlled LED Lamp Based on Integral Mode V-PWM Converter Control System Design of Climbing Robot Based on PLC and SCM Design of Boring Machine Electrical Control System Based on Omron PLC A Global Thresholding De-Noising Method for Power Quality Signals Design of Control Terminal for Water Quality Detection Based on the Beidou Satellite Navigation System Hardware Design of Electronic Parking Brake System The Research and Development of Motor Cooling Control System Based on Electronic Parking Brake Test Bench Study of Supercapacitors Based on Nanomaterial’s of Novel Architectures Single-Phase Independent Droop Control Strategy in Low-Voltage Microgrid Grid Connected Photovoltaic Simulation System Based on TMS320F28027 A Novel Energy-Harvesting Active Radial Bogie for Railway Vehicles: Design, Simulation and HIL Test A Study on the Use Cases of the Smart Grid Home Energy Management System The Application of Saving Energy and Reducing Consumption System in an Electric Power Group Design of Belt Conveyor Control System Based on Motion Controller Implementation of the Li-Ion Battery Management System Based on DS2438 Blasting Hole Recognition and Location Based on Machine Vision The Research and Design of Multi-Functional Intelligent Tourniquet Analysis and Suggestions for Power Supply Reliability Assessment Index of Distribution Network Research on Maintenance Platform of Video Optical Detection Clustering Routing Algorithm for Heterogeneous WSN with Energy Harvesting ROS Based Voice-Control Navigation of Intelligent Wheelchair Research and Realization of Simulation for Automobile Steering Resisting Torque Research and Simulation of ABS Control Method A Study on Digital Model and Simulation Method of Pulse Doppler Fuze PID and Velocity Feedback Control for ABS Based on Wheel Slip Modeling and Simulation of a Hydro-Pneumatic Accumulator System for Hybrid Air Development Chapter 8: Communications and Applied Information Technologies Research on Communication Lines Detection in WAMS Design of Mine Communication Module Based on Power Line Carrier and CAN Bus An Optimal Resource Allocation Algorithm in Cloud Computing Environment A Flexible Workflow Model of Role Based Access Control Research on the RFID Antenna Screen Printing Technology VOR Navigation Receiver Repair Technology Research Analysis of the Application of the Internet of Things Technology in Environmental Monitoring Research on the Effect of the Relative Speed of the Performance in Bidirectional Traffic Stream Architecture and the Key Technologies of Medical Equipment Management System Based on the Internet of Things RETRACTED: A Study on the Application of Deconstructing Byzantine Fault Tolerance OMA DRM-Based Key Management Protocol for IPTV The Research on Monitoring System Design and Implementation for the Network Security Design and Implementation of Fire Multi-Level Menu for Office Automation Platform Based on Communication Technology Research on the Construction of Digital Library Virtual Environment Based on the Cloud Computing Technology Research on the Application of Chinese Search Engine Analysis of MIDI Audio Files Based on Method of Information Quantity Estimation Structural Parametric Modeling and Analysis of a Ship Stiffened Deck Plate Based on the Patran Command Language Optimization Analysis of Supply Logistics in Automobile Manufacturing Based on Internet of Things Design and Implementation of Meteorological Observation Instrument Virtual Assembly System Using Blender An Optimized Low-Power-Consumption Tracking Algorithm Based on Navigation Message Structure for Weak Signals Chapter 9: Applied and Computational Mathematics, Methods and Algorithms Optimization and Data Processing Calculations for the Number of Titanic Sets Suffix Tree Constructing Algorithm for Datasets with Discrete Contents A Kriging Model-Based Approximation Technique for Predictive Design Solving Computational Expensive Problems with a Response Surface Surrogate Models Surrogating for High Dimensional Computationally Expensive Multi-Modal Functions with Elliptical Basis Function Models Study on Approximation Methods with Chebyshev Polynomial Models Extraction of Inertial Parameters Based on 3D-Voxel Model of Equal Volume Application of the Combination Prediction Model in Forecasting the Short-Term Wind Power Application Research on Improved Fusion Algorithm Based on BP Neural Network and POS Group Synchronization Analysis of Network by Matrix Theory Harmonic Analysis Based on Modified Hyperbolic S-Transform Statistical Inference and Application for Partially Linear Models Analysis of Extreme High-Temperature Time Series Based on Empirical Mode Decomposition The Kalman Filter Cuckoo Search Algorithm to Solve the TSP Problem Matlab Implementation in ZOOM FFT Technology Based on Analytic Signal and Band-Pass Filter Improved LSB Algorithm of Image Hiding Based on Randomness 3D Model Retrieval Based on Distance Classification Histogram Object-Based Multi-Feature Classification of High Spatial Resolution Remote Sensing Image Adaptive Synchronization of a Stochastic Fractional-Order System Chapter 10: Engineering Management in Industrial Sector Evaluate the Efficiency of Chinese Regional Quality Development Based on DEA and Malmquist Index The Research on Electric Power Enterprise Trainer Management System Study on Innovation Strategies of China Petroleum Supply Chain Optimization Based on the Identification and Location Quotient Measure Law CES Yulin New Energy Industry Clusters and Analysis The Research of Supply Chain Optimization Theory Based on Service-Oriented Manufacturing Safety Management Pattern for Equipment Complex System Development of High-End Agriculture Based on Dynamic Diamond Model Analysis of Technique-Economy Studies of Branch System Calculation Method Based on ARCGIS-SDE Spatial Evolution Trend of Industrial Clusters Space An Overview of the Energy Systems Allocation Model under Uncertainty The Feasibility Analysis and Development of the PET Regenerated Staple Fiber Industry Theoretical Framework and Research Case of the Energy Enterprise Internal Auditing Management System’s Innovation and Upgrade


Best Sellers


Product Details
  • ISBN-13: 9783038268024
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 733 Applied Mechanics and Materials
  • ISBN-10: 303826802X
  • Publisher Date: 16 Feb 2015
  • Binding: Digital download and online
  • No of Pages: 1022


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Engineering Decisions for Industrial Development: (Volume 733 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Engineering Decisions for Industrial Development: (Volume 733 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Engineering Decisions for Industrial Development: (Volume 733 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!