Mechanical and Materials Engineering
Home > Mathematics and Science Textbooks > Physics > Applied physics > Mechanical and Materials Engineering: (Volume 554 Applied Mechanics and Materials)
Mechanical and Materials Engineering: (Volume 554 Applied Mechanics and Materials)

Mechanical and Materials Engineering: (Volume 554 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from the World Virtual Conference on Advanced Research in Mechanical and Materials Engineering, March 18-22, 2014, Kuala Lumpur, Malaysia. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 141 papers are grouped as follows: Chapter 1: Material Science, Chapter 2: Thermo and Fluid Research, Chapter 3: Applied Mechanics, Chapter 4: Mechanical Engineering, Chapter 5: Electrical Research, Chapter 6: Air Engineering

Table of Contents:
Preface and Organizing Committee Chapter 1: Material Science Tensile Shear Strength of Wood Adhesive from Recycled Polystyrene Comparison of Dry and Cryogenic Machining on Chip Formation and Coefficient of Friction in Turning AISI 4340 Alloy Steel Tribological Characterization of the Cutting Zone in Milling Nickel Based Alloy Effect of Salicylic Acid / Ethanol Treatment on Tensile Properties and Morphology Analysis of Recycled High Density Polyethylene / Wood Fiber Composites Comparison on the Characteristics of Bio-Based Porous Carbons by Physical and Novel Chemical Activation Effect of Nano-Clay and their Dispersion Techniques on Compressive Properties of Unsaturated Polyester Resin The Instability Improvement of the Shape Memory Alloy Composite Plates Subjected to In-Plane Parabolic Temperature Distribution A Review of Porous Concrete Pavement: Applications and Engineering Properties Natural-Synthetic Polymer Blend Composite Scaffold for Bone Tissue Engineering: Study of In Vitro Degradation and Protein Adsorption The Effects of Nickel Underlayer and Solder Dipping as Tin Whisker Mitigations in Tin Surface Finishes Fabrication and Characterization of Polycaprolactone (PCL)/Gelatin Electrospun Fibers Polycaprolactone(PCL)/Gelati(Ge)-Based Electrospun Nanofibers for Tissue Engineering and Drug Delivery Application Mechanical Properties of Polyamide 6 (Pa6) / Ethylene Vinyl Acetate (Eva) / Sepiolite Composite The Study of Morphological Structure and Raman Spectra of 3C-SiC Membranes Effect of Epoxidation Level in Silica Filled Epoxidized Natural Rubber Compound on Cure, Rheological, Mechanical and Dynamic Properties Preliminary Study on Bamboo as Sound Absorber Influence of Compatibilizer on Mechanical Properties of Polylactic Acid/Natural Rubber Blends Preparation and Characterization of Polyvinyl Alcohol/Starch Blend Film Composite Effect of Maleic Anhydride (MA) on Properties of Recycled High Density Polyethylene/Ethylene Vinyl Acetate/Egg Shell Powder (rHDPE/EVA/ESP) Composites Synthesis of a Compatibilizer and the Effects of Monomer Concentrations Preparation of Epoxy-Novolac Resin Binder Using Phenolic Rich Fractions of Biomass Pyrolytic Oil as Partial Substitute of Phenol Performance of RHA Blended Cement Concrete under Sodium Chloride via Wetting and Drying Porous Concrete Paving Blocks Using Coarse Aggregate The Using Fungi Treatment as Green and Environmentally Process for Surface Modification of Natural Fibres Effects of Stone Powder on Water Absorption and Biodegradability of Low Density Polyethylene/Palm Pressed Fibre Composite Film Double Layer Concrete Paving Blocks Using Waste Tyre Rubber as Aggregate Replacement Partial Discharge Characteristic of Low Density Polyethylene and Silica Nanocomposite Effect of PEgMAH on Tensile Properties and Swelling Behaviour of Recycled High Density Polyethylene/Ethylene Vinyl Acetate/Waste Tyre Dust (r-HDPE/EVA/WTD) Composites Effect of Polyethylene Grafted Maleic Anhydride (PEgMAH) on Tensile Properties and Swelling Behavior of Ethylene Vinyl Acetate (EVA)/ Natural Rubber (NR)/ Feldspar Composites Electrical Properties Investigation of Unsaturated Polyester Resin with Carbon Black as Fillers The Performances of Intimately Mix and Layer Methods in Microwave Assisted Pyrolysis System Investigation of the Electrical Resistivity of 20μm-Gap Gold-DNA-Gold Structure: Exploiting the Current-Voltage Characteristics under a Variable External Magnetic Field Stress Analysis of Adhesive Bonding of Urea Granulator Fluidization Bed Mechanical Properties of Vinyl Ester Resin/Epoxidized Plam Oil/Nanoclay Composite Development of Mathematical Equation for Chip Serration Frequency in End Milling of Titanium Alloy (Ti6Al4V) under the Influence of Magnetic Field from Permanent Magnets Optimization of Preparation of Microwave Irradiated Bio-Based Materials as Porous Carbons for VOCs Removal Using Response Surface Methodology Effect of Low Current for Machining Pit Using Electrical Discharge Machine Effects of Silicone Surfactant on the Water Absorption and Surface Morphology of Rigid Palm Oil-Based Polyurethane Foam Tensile Strength of Untreated Napier Grass Fibre Reinforced Unsaturated Polyester Composites The Effect of Blending Ratio on Mechanical Properties of Polylactic Acid (PLA) / Ethylene Vinyl Acetate (EVA) Effect of Polypropylene Fiber on the Flexural Strength of Ferrocement Effect of Rice Husk Ash Fineness on the Properties of Concrete Effects of Elevated Temperatures on the Compression Strength of Nanoclay Filled Unsaturated Polyester Resin Effect of Zinc Coating Thickness on Corrosion Performance of Mild Steel in Atmospheric and Seawater Environment The Influence of Seawater Velocity to the Corrosion Rate and Paint Degradation at Mild Steel Plate Immersed in Sea Water Chapter 2: Thermo and Fluid Research Computational Investigation of Film Cooling from Cylindrical and Row Trenched Cooling Holes near the Combustor End Wall Application of the Lattice Boltzmann Method for Fluid Flow around Complex Geometry Film-Cooling Techniques at the End of Combustor and Inlet of Turbine in a Gas Turbine Engine: A Review COP Improvement of Thermoelectric Cooler through the Optimization of Heat Dissipation System ANFIS Direct Inverse Control of Substrate in an Activated Sludge Wastewater Treatment System The Effect of Water Hammer on Pressure Oscillation of Hydrogen Natural Gas Transient Flow Energy Savings on Automotive Air Conditioner Using Liquid-Suction Heat Exchanger Subcooler Numerical Analysis of Modified Ejector Cycle on Ejector as an Expansion Device on Residential Air Conditioner Bio-Oils Characteristic from Oil Palm Biomass from Different Fast Pyrolysis Techniques Evaluation of the Prospects of Using Solar Thermal Air-Conditioning Systems in Saudi Arabia Potential Analysis of Rice Straw as an Alternative Energy Source for Substitute Coal in Indonesia The Oxidation Effect of Palm Oil Based Lubricant Using Four – Ball Tribotester The Influence of Normal Load in Wear Resistance Characteristic of Palm Fatty Acid Distillate The Effect of Lubricant Viscosity in Cold Work Forward Extrusion Simulation of Flow over a Cavity Using Multi-Relaxation Time Thermal Lattice Boltzmann Method Study of Effect of Thermal Diffusivity on Ground Temperature for Malaysian Climate Microwave Assisted Pyrolysis of Waste Biomass Resources for Bio-Oil Production Transient Removal of Contaminants in Cavity of Mixed Convection in a Channel by Constrained Interpolated Profile Method Simulation Film Cooling in the Leading Edge Region of a Turbine Blade (Trench Effect on Film Effectiveness from Cylinder in Crossflow) Experimental Investigation on the Thermal Insulation Properties of Eic-Cellulose Evaluation of Paraffinic Mineral Oil as Lubricant in Cold Work Extrusion Process Phenolic Rich Components Identification of Heavy Oil Fractions of Biomass Pyrolytic Oil for Epoxy Resin Binder Control System of Fish Feeding Devices in Actual Pond Chapter 3: Applied Mechanics Finite Element and Experimental Study of Friction and Lubricants in Strip Drawing Prototype of Compact Flexural Fatigue Testing Machine 3D Finite Element Stress Analysis of Butt Adhesively Bonded Dissimilar Joint: Effect of Bond Thickness on Strength Comparison of NARX Neural Network and Classical Modelling Approaches Strength of Ductile Adhesive Butt Joint Bonded with Dissimilar Adherents: Effect of Surface Roughness Short-Term Test of ±55 Filament Wound GRE Composite Pipes under Multiaxial Stress Ratios Multi Objective Optimization of Surface Roughness and Workpiece Surface Temperature in Turning Operation Pressure Distribution around Mixing Blades in Biodiesel Reactor Using Computational Fluid Dynamics (CFD) A Study of Software Approach for Predicting Weld Bead Geometry in Shielded Metal Arc Welding (SMAW) Process The Interlaminar Shear Strength Test of Helical Wound Glass Fibre Reinforced Epoxy Laminates Subjected to Hydrothermal Ageing Friction and Wear Performance of Double Fraction Palm Olein Lubricant Using Pin-on-Disk Tribometer Wear Characterization of Aluminum Lubricated with Palm Olein at Different Normal Load Strength of Three-Point-Bending Ductile Adhesive Joint with Dissimilar Adherents Individual Stiffness of 3D Space Frame Thin Walled Structural Joint Considering Local Buckling Effect The Correlation between Applied Load and Sliding Speed on Wear Behaviour of Tamarind Wood under Dry Sliding Tests Shear Resistance of Trapezoidal Corrugated Web in Local Buckling Stress and Thermal Analysis of CubeSat Structure Predicting Surface Roughness in Turning Operation Using Extreme Learning Machine Chapter 4: Mechanical Engineering Estimation of Threshold Fluence, Absorption Coefficient and Thermal Loading of Car Coated Substrate in Laser Paint Removal Performance Analysis of Hydrocarbon Mixture to Replace R134a in an Automotive Air Conditioning System The Effects of Alkaline Catalysts in Used Frying Oil Biodiesel on the Diesel Engine Performances Application of ANN to Predict S.I. Engine Performance and Emission Characteristics Fuelled Bioethanol Optimization of Heavy Duty Truck Chassis Design by Considering Torsional Stiffness and Mass of the Structure Performance Study of Electric Compressor in Non-Electric Vehicle Energy Analysis and Compressor Performance of Refrigerator System Using Programmable Logic Control (PLC) Optimizing the Ignition Timing of a Converted CNG Mono-Gas Engine Effect of Air Movement to Spray Development of Rapeseed Oil in Diesel Engine Design and Development of Light Weight Engine Mounting for UTeM Formula Varsity Race Car  Modeling and Validation of Quarter Vehicle Traction Model Effects of Storage Duration on Biodiesel Properties Derived from Waste Cooking Oil Heterogeneous Microwave Irradiation Biodiesel Processing of Jatropha Oil Performance Comparison between Diesel Fuel and Biodiesel Using a Low Cost Single Cylinder Diesel Engine Dynamometer Screening Efficiency and Entrepreneurship Potential in Automotive Suppliers Using DEA Modelling and Validation of Vehicle Ride Comfort Model Effects of Biodiesel Derived by Waste Cooking Oil on Fuel Consumption and Performance of Diesel Engine Optimal Composite Nonlinear Feedback Controller for an Active Front Steering System Arm Effect on Performance of Vertical Axis Current Turbine Using RANS Simulation Modeling and Numerical Simulation for the Newly Designed Four Cavity Blades Vertical Axis Wind Turbine Development of Computer-Aided EDM for Machining Micropits on Spherical Surface of Hip Implant Hybrid Model for Evaluation of Manufacturing Sustainability Using Axiomatic Design Principles: A Case of Machining Processes Implementation of Wheelchair Motion Control Based on Electrooculography Using Simulation and Experimental Performance Testing How Hotelling’s T2 Control Chart Performed with the Autocorrelation Imposed when Controlled Correlation is Used Implementation of Wireless Thermal Camera Remote Control System Propeller Effect on 3D Flow at the Stern Hull of a LNG Carrier Using Finite Volume Method Chapter 5: Electrical Research Effect of Ambient Temperature Zinc Oxide Surge Arrester Condition Monitoring Partial Discharge Detection and Localization in Power Transformer Windings Observation of Isolated Breakdown Lightning Flashes in a Tropical Region Chemical Analysis on the Effect of Pulsed Electric Fields in Pineapple Juices Preservation The Effect of Magnitude and Shape of Applied Voltage on the Partial Discharge Behavior in Cylindrical Cavity within a Dielectric Material Correlation between Third Harmonic Leakage Current and Thermography Image of Zinc Oxide Surge Arrester for Fault Monitoring Using Artificial Neural Network The Impacts of Hybrid Connection Pumped Storage Hydropower and Wind Power in Iranian Grid Surge Arrester Leakage Current Analysis by Using Particle Swarm Optimization Technique Model of Pulse Power Generator in Electrical Discharge Machining (EDM) System Return Strokes Measurements of Electric Field Produced by Lightning Discharges in Malaysia Study on the Vertical Component of Lightning Electric Field during Monsoon Period in Malaysia The Effect of Grounding Electrode Parameters on Soil Ionization and Transient Grounding Resistance Using Electromagnetic Field Approach Supply Chain Performance in Electronics Manufacturing Industry Power Generator of Electrical Discharge Machining (EDM) System Control Strategy for Electrical Discharge Machining (EDM) Pulse Power Generator Gap Response of Linear and Non-Linear Discharge Model in Electrical Discharge Machining System Chapter 6: Air Engineering Numerical Simulation of Wind Flow Structures and Pollutant Dispersion within Street Canyon under Thermally Unstable Atmospheric Conditions Position Tracking Controllers for Two Wheeled Inverted Pendulum Robot Numerical Simulation of High Reynolds Number Flow Structure in a Lid-Driven Cavity Using MRT-LES Validate of Local Exhaust Ventilation (LEV) Performance through Analytical, Experimental and Computational Fluid Dynamic (CFD): A Case Study Model Two-Sided Lid-Driven Cavity Flow at Different Speed Ratio by Lattice Boltzmann Method Numerical Prediction of Thermal Effect on Flow Field around a High-Rise Building Model Measurement of Thermophoretic Velocity in Surrounding Gas of Nitrogen or Carbon Dioxide Simulation of the Airflow Characteristics inside Hard Disk Drive A Verification and Validation Study of CFD Simulation of Wind-Induced Ventilation on Building with Single-Sided Opening Derivation of Effective Ratio of Acoustic Impedance for Impacting Viscoelastic Slug (Standard Linear Solid Model) and Elastic Rod Acoustic Energy Harvesting Using Flexible Panel and PVDF Films: A Preliminary Study Survey on the Indirect Methods of Potential Flow Used for the Optimization of Airships Profile Prediction of Wind Flow around High-Rise Buildings Using RANS Models


Best Sellers


Product Details
  • ISBN-13: 9783038264903
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 554 Applied Mechanics and Materials
  • ISBN-10: 3038264903
  • Publisher Date: 02 Jun 2014
  • Binding: Digital download and online
  • No of Pages: 758


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Mechanical and Materials Engineering: (Volume 554 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Mechanical and Materials Engineering: (Volume 554 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Mechanical and Materials Engineering: (Volume 554 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!