Mechanical Design and Power Engineering
Home > Mathematics and Science Textbooks > Physics > Applied physics > Mechanical Design and Power Engineering: (Volumes 490-491 Applied Mechanics and Materials)
Mechanical Design and Power Engineering: (Volumes 490-491 Applied Mechanics and Materials)

Mechanical Design and Power Engineering: (Volumes 490-491 Applied Mechanics and Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from 2013 the 2nd International Conference on Mechanical Design and Power Engineering (ICMDPE 2013), November 29-30, 2013, Beijing, China. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 330 papers are grouped as follows: Chapter 1: Advanced Materials Engineering, Technologies and Processing; Chapter 2: Applied Mechanics and Dynamics; Chapter 3: Engineering Design, Modeling, Simulation and Computational Methods; Chapter 4: Engineering and Automation; Chapter 5: Electronics and Integrated Circuits, Embedded Technology and Applications; Chapter 6: Electrical Engineering, Electric Machines and Mechatronics; Chapter 7: Data and Signal Processing; Chapter 8: Measurement, Monitoring and Testing Technologies

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Advanced Materials Engineering, Technologies and Processing Capacitive Properties of Polyaniline/Nickel Hydroxide Composites Prepared by Using 4-Amino Thiophenol as the Structure Directing Agent Study on the Formation of Nanometer Silver Sol by Micro Arc Discharge Study on Scheduling Method for Reentrant Autoclave Moulding Operation of Composite Materials Morphology and Strength of Cement Paste from Clay as Nanomaterial A Material Selection Criterion for Hot-Stamping Dies Investigation on TiCP/Al Composite Coating by TIG Cladding Research of the True Flow with High Polymers as a Critical Process Parameter Nanocrystalline Ni-30wt%Fe Supersaturated Solid Solution Synthesized by Mechanical Alloying The Effect of VC on the Sintering Ability and Microstructure of WC-Al2O3 Composites Operation Mechanism of Terminal Distribution of Productive Materials Optical Properties of DLC-Ag Nanocomposite and Grating Structures on their Base Study of Typical Filter Material on Dust Cleaning Friction Properties of Sisal Fiber Reinforced Nano-SiO2 Phenol Formaldehyde Resin Brake Composites The Properties of Low Yield Ratio and High Heat Input Welding Construction Steel and the Microstructure of HAZ Effect of Aging Treatments on the Tensile Strength and SCC Resistance of 7A04 Aluminum Alloy Numerical Simulation on Water Absorption by MX-80 Bentonite for Nuclear Waste Disposal Effects of Primary Si and Applied Load on the Dry Sliding Wear Behaviors of Hypereutectic Al-20Si Alloy AFM Analysis of Fullerene C60 Coated Para-Aramid Fabric via Physical Vapor Deposition Experimental Study on the Electrothermal Effect of Concrete Reinforced with Hybrid Carbon and Steel Fiber Facile and Green Method for Fabrication of Polystyrene/Multi-Walled Carbon Nanotube Composites with Covalent Functionalization Study on Chromium-Free Pretreatment Solution of Color Coated Sheet The Effect of the Microstructure of Semisolid Al Alloy on its Rheology Surface-Specific Catalytic Activity of Carbon Nanotube Encapsulated with Metal-Oxide Clusters Room Temperature Atomic Layer Deposition of SiO2 on Flexible Plastic Materials Nano World: A Novel Path for Modern Drug Discovery Research and Development of a New Type of Iron Coated Nodularizer Tribological Properties of KDP Single Crystal Influence Analysis of Performance on Sasobit Warm Mix Asphalt with Salinity Heavy Metal Contents of some Wild Edible Mushrooms from Miyi, China Suizhong 36-1 Oil Field Acid Rock Dissolution Rate Studies Performance Evaluation of the Carbon Dioxide Corrosion Inhibitor IMC-1 Effect of Surface Finishing on Filtration Performance of a Regenerable Filter Media Flotation Experimental Study of High-Sulfur Cu-Zn Ore in Yunnan Study on Beneficiation of a Fe-Mn in Sinkiang Synthesis and Properties of Barakol Tailored for Fluorescent Biodiesel Marker Theoretical and Experimental Study on Crystal Detachment from a Chilling Surface with Vibration Preparation and Performance of Electrodeposited Cr-Pr Coating Experimental Study for Ultra High Strength Strapping Flat Steel The Anti-Corrosion Study on Zn-Al-Mg Coated Steel Sheets Microstructure and Mechanical Properties of Al/AlN Surface Composite Fabricated via Multi-Pass Friction Stir Processing TEM Characterization of the Microstructure of Hot-Hydrostatically Extruded 93W-4.9Ni-2.1Fe Alloy Effect of Flame Retardants on Aging Properties of Asphalt Binders Development of Surface Roughness Prediction by Utilizing Dynamic Cutting Force Ratio Zeolite Supported Cobalt Catalysts for Sodium Borohydride Hydrolysis Investigation on Properties of Modified Asphalt Containing Antiaging Agent Study on Surface Modification of Mesporous Silica SBA-15 Theoretical Analysis and Experimental Study on Heat-Transfer in Cryogenic Gas Atomization Jet Cooling Nickel-Base Alloy Wetting Behavior of Al Melt/C Interface and Al-Ti Melt/C Interface Assisted by AlF3-KF Salt Eutectic Characterisation of Micro Channels in Electrochemical Discharge Machining Process Research of the Chemico-Mechanical Practices in Polymer Material Processing by Cutting Material Removal Mechanisms in Cu Electrochemical Mechanical Polishing Analysis of Heat Pipe Filled with Several Oxide Nanofluids on the Start-Up Process Study on Microstructure Evolution during the Cold Roll-Beating of 40Cr Nanostructured Surface Effect of Electrode on Doxorubicin Determination Study on the Theory of a New Kind of Cutting Technology and the Test Analyses Low Resistance Transparent Electrode Microfluidic Nonwoven-Based Device as a Potential Biosensor for Sweat Analysis Different Content of Short Carbon Fiber Influence on the Hardness of Thermo Plastic Resin Composite Material Study on Application of Carbon Fiber Strengthen Thermoplastic Resin Composite Material Numerical Control Machining of Scroll with Variable Thickness Optimization of Cutting Parameters for Turning Based on GALib XPS Study of the Effect of Low Temperature Ammonia Plasma Treatment on PAN-Based Carbon Fiber Precise Die Face Design of Drawing Dies for Stamping Process Based on Point Cloud MQL Application in High-Speed Turning Bearing Steel Evaluation of Carbon Dioxide Corrosion on N80 Steel Analyses of Strategies and Problems in Resistance Spot Welding of Dissimilar Materials Size Tunable near Infrared High-Quality PbS Quantum Dots Chapter 2: Applied Mechanics and Dynamics Global Existence and Asymptotic Behavior of Solutions for Nonlinear Wave Equations Modal Modification of Damped Asymmetric Systems without Using the Left Eigenvectors Dynamic Characteristics Analysis of the Magnetic Levitation Cylindrical Linear Motion Guide Study on the Static and Dynamic Characteristics of Linear Rolling Guideway Periodic Motion Control of Flexible Manipulator via Controllable Local Degree of Freedom Testing of Hardness on Long Rail Welded Joint by Means of Magnetic Barkhausen Noise Technique Study on Cutting Performance and Wear Mechanisms of Graded Ceramic Tool Study on a Portable Abrasive Suspension Jet Cutting Machine for Coal Mines Study of Proportional Navigation Guidance of Reentry Vehicle Considering Wind Disturbance Kinematic Analysis Based on Screw Theory of a 3-DOF Cable-Driven Surgical Instrument Dynamic Analysis on the Principle and General Research Situation of Band Conveyor Based on 1/4 Vehicle Suspension System for Tire Pressure and Tire Stiffness Nonlinear Studies Research on FFSR Kinematics and Dynamics Modeling and its Parallel Coordination Motion Control The Analysis and Solutions of Floor Vibration for Light Bus Experimental Study on a New Type of Pneumatic Flexible Joint Dynamic Response of the Fiber Metal Laminated (FML) Plate with Interfacial Damage in Unstable Temperature Field Dynamic Modeling and Control of Flexible Hexapod Platform for Micro-Vibration Isolation and Precision Tracking Experimental Study on Hydrodynamic Characteristics of Three-Stranded Polyethylene Rope Stability of Rock Slope with Geo-Material Described by Nonlinear Criterion Chapter 3: Engineering Design, Modeling, Simulation and Computational Methods Numerical Study on Creep Properties of the Governing Stage Blade for Large Power Steam Turbine Considering Airflow Force An Approach to the Design and Calculation of a New Hydraulic Motor Mathematical Modeling and Simulation Analysis of Lift for Car Hydraulic System Performance Optimization of DOA Estimation in Non-Uniform Linear Antenna Array by PSO Algorithm A New Fault Location Algorithm for Series Compensated Lines Using Two Terminal Data The Analysis of Voltage Stability in Power System Simulation on Performance of Sequential Turbocharging Diesel Engine with Inlet and Exhaust Bypass System Research on the Distriution Rules and Calculation Method of the Parameters of Reservoir of Putaohua Groups in Yushulin Oil Field Long and Medium Term Load Forecasting Based on Grey Model Optimized by Cosine Function and Time Response Function Nonlinear Behavior and Characterization of Flow through Preferential Seepage Channels Virtual Maintenance Technology Application Research in Agricultural Vehicle Repair Dynamic Detection of the Multiple Hydrate Blockages in Natural Gas Pipeline Using Mass Pulse at the Inlet Configuring Agents for the Design of Chamber Systems of IC Equipments Finite Element Modal Analysis of S385 Diesel Engine Block Improvements for a Hydraulic Excavator's Boom Workflow Based Assembly Process Control and Management Method for Complex Product Study the Smoke Characteristics of Fire in the Ship Engine Room Based on the Different Speeds of Inlet Air Study on the Radar Echo Dynamic Image Simulation Graph Based Property Representation for the Function Decomposition Pumping Unit Optimization Design Based on Virtual Prototype Technology The Finite Element and Experimental Modal Analysis on the Rack of Batching Mixer System Parameter Design of LS-SVM Based on QPSO and its Application to Node Localization Application Research of Integrated Design Using Neural Networks Simulation on Expanding Steady Working Range of Centrifugal Compressor by Self-Recirculation Casing Treatment A Design of Digital Imaging System Based on Underwater Laser Line-Scanning Reliability Optimization Design of Mechanical Parts Involving Confidence Level of Reliability An Inspection Period Analysis of the Grinder Rods Eccentric Wear of the Rod-Pumped well Based on the Multi-Linear Regression Equation The Numerical Simulation on Diesel Particulate Filter Based on CFD Technology Use of Drawings Archive for Design Process Structure Design of a Machining Center Bed Based on Topology Optimization Technique The Study of EDM TC11 Surface Discharge Mark Diameter Based on the Artificial Neural Network Modeling Modal Analysis of Diamond Wire Cutting Machine's Bed Numerical Simulation for Residual Stress and Deformation of Surface Welding on Membrane Water-Wall Study on Feed Offset in Elliptical Vibration Cutting The Springback Predication for a Pillar Reinforcement Plate with Drawing Surface Optimization The Full Flow Simulation of Auto Centre Pillar Reinforce Plate The Finite Element Analysis of Car's Rear Axle and Prediction of Fatigue Life A Rigidity and Flexibility Coupled Reliability Calculation Method for the Type 6-6 Stewart Parallel Mechanism Computational Modal Analyses of a Steel Nuclear Containment Vessel Structural Analysis and Optimization of Combine Harvester Frame The Inversion Analysis of the Reservoir Saturation Landslide's Permeability Coefficient Design on Test Bench of Safety Belt Emergency Locking Property The Numerical Simulation of Hemispherical Parts Based on FBDF Technology Precision Analysis of the Surface Model Based on Geomagic Qualify The Relationship between Frequency Domain Blind Source Separation and Frequency Domain Adaptive Beamformer Simulation Research on the Potential and Sencitivity Distribution of ECT System Based on Finite Element A Generalized Thermoelastic Diffusion Problem with Temperature-Dependent Properties Versatile Assembly Systems for Large Components on the Example of the Aircraft Structure Assembly Fast Design and Analysis of Large Gantry Machining Center Based on Unit Structure Research on Determination Method of Maintenance Support Personnel of Equipment System Finite Element Analysis of Bridge-Foundation Interaction System under Horizontal Seismic Excitation Flow Field Simulation of Fan Nozzle Jet Used for Disc Tool Cooling with Fluent Homing and Docking Autopilot Design for Autonomous Underwater Vehicle Lever–Ejection Mechanism of Two–Color Injection Mould Structure Vibration Shape Optimization Based on Power Flow Response Analysis The Demonstration of the Generalized Kalman Filter A Novel Isar Active Jamming Method Based on Micro-Motion Modulation Finite Element Analysis and Comparison of Screw Pump Models in Uniform Pressure Dynamic Analysis and Simulation of Vertical High-Speed Feeding System Based on Direct-Drive Technology A New Slip Algorithm for Use in Hardware-in-the-Loop Simulation to Evaluate Anti Slip Control of Vehicles A Prototype of Calligraphy Application Design for Students on Tablet Computer A Preliminary Design of Recommended Nutrition and Energy Expenditure Application for Smartphone Two-Level Parallel Alignment Based on Sequence Parallel Vectorization Loudness Calculation and its Application Based on Moore Model Motion-Estimation-Drive Fabric Dynamic Simulation The 3D Modeling and Characteristic Analysis of EBH300 Roadheader The Technology of Flexible Blank Holder Forming and the Study of its Numerical Simulation Asynchronous Multi-Sensor Fusion Algorithm Based on the Steady-State Kalman Filter Numerical Simulation on Effect of Pressure-Released Hole Combined Support with Rockbolt by Dynamic Loading Synthesized ADRC for One-Level Inverted Pendulum System through Combination of Separating and Assembling Specifying Concurrent Program Based on TLA A High-Gain Observer-Based Pd Controller Design for Dynamic Positioning of Ships Design of Mobile Interactive Learning Community Based on Electronic Cognitive Apprenticeship Mechanism Study of Curve Planning Algorithm for Partition-Type Rotary Burrs Partition Scheduling Research of Hard Real-Time and Multi-Core System An Optimal Consensus Control for Multiple Agents System with Time-Delay and Disturbances Optimization and Analysis of Double Wishbone Independent Front Suspension Based on Virtual Prototype Study of Temperature Field Distribution and Deformation of Chain Link Based on Pro/E Numerical Simulation of Indoor Velocity Field in Winter Effected by Jet Flow Velocity Attached on Exterior Wall Analysis of Facade Redesign for Enhanced Satisfaction and Improved Building Performance Numerical Simulation of Air Distribution of Lateral Supply and Return Pattern Affected by Indoor Heated Source Distribution Models Rigid-Elastic Coupling Multi-Body Dynamics Modeling for a Car and Analysis Optimization of Understeer Surrounding Rock Rupture Modeling of Tunnel Based on ANSYS Effects of Mechanical Stimulation on MMP-2 and TIMP-2 Expression of Scleral Fibroblasts after Posterior Sclera Reinforcement An Optimal Frequency Hopping Sequence Set Based on the Polynomial Theory Chapter 4: Engineering and Automation Study on Electronic Controlled Diesel Engine Calibration System Based on CAN-Bus Transfer Alignment for MEMS Integrated Navigation System Based on H∞ Filter The Best Speed Limit Range for Road Hump Development and Application of a PID Auto-Tuning Method to a CNC Servo Control The Research of the Power Capsule Fan Energy Consumption in Thermal Balance Test Method Performance of Hydrostatics Spindle under Effect of Mass Unbalance A Transportation Guidance System Based on Data Mining and GABP Fuzzy PID Control Mobile Manipulator with Passive Suspension Sensorless Control of PMSM Based on Sliding Mode Observer Effects of Chemical Reaction Models on Simulations of Scramjet Nozzle Flow Research on the Heat Transfer of High-Speed Railway Pantographs Dynamic Mission Control Method for Multi-UAV System Hamiltonian Matrix Strategy for Exponential Synchronization of Neural Networks with Diffusion Dye-Free Coloration in Dyeing and Printing of Tussah Silk Based on PHBA Sensorless Control of PMSM Based on Improved Sliding Mode Observer Method Research of Nonlinear Adaptive Flight Control Using Inversible System of Neural Networks Research on the PID Tuning of Electric Power-Assisted Steering Test Bench System Recent Development of Electric Vehicles Study on Radioactive Wastewater Treatment by Precipitation and Membrane Separation Study on Reactive Support of Distributed Generation The Application of Linear Motor Analysis Experimental Investigation of Performance and Emission Parameters Changes on Diesel Engines Using Anisole Additive Dynamic Analysis of Crank-Connecting Rod-Piston Mechanism of S195 Diesel Engine Based on MATLAB Comparison of Robust Input Shapers for Elimination of Residual Vibrations Analysis of Temperature Field of High Speed Diesel Engine Parts and their Structural Optimization The Thermal Characteristics of the Ball Screw Feed System on a Gantry Machine Tool Analysis of HEV Engine Start Process Based on μC/Os-II Development and Application Road Testbench on Vehicle Hydraulic Power Steering System Chapter 5: Electronics and Integrated Circuits, Embedded Technology and Applications Examining the Use of B-Splines in Parking Assist Systems Driving Control Research on Separated Road Surface for Electric Vehicles with Independently Driven Front and Rear Wheels The Development of Embedded Electronic Jacquard Machine Controller Based on ARM7 Design and Fabrication of MEMS-Based Solid Propellant Microthrusters Array Design and Implementation of Galaxian Game Based on FPGA Architecture A Study of Unidirectional Driving Circuit of Piezoelectric Device Considering Energy Recovery Diesel Engine Working Cycle Utilizing Artificial Intelligent Systems Active Control of Along-Wind Response of a Tall Building with AMD Using LQR Controller Nonlinear Modeling of Electrical Equivalent Circuit of Rotary Traveling Wave Ultrasonic Motor Car Blind Area Alarm System Based on AT89S52 MCU The Design and Implementation of MSINS/GPS Navigation Computer A Development and Optimization of Broadcast Live System The Wireless Ultrasonic Sensor System Based on the Chip of SH79F32 Design and Development of Test and Control System for Hydraulic Steering Control Unit Based on Virtual Instrument Chapter 6: Electrical Engineering, Electric Machines and Mechatronics 2D Contractile Water Jet Thruster Characterization for Bio-Inspired Underwater Robot Locomotion Radiation Disturbance from AC Motors in Underground Coal Mines Research the Stealth Technology of Ship Electric Field by Applying Magnetic Eliminate Strategy Design of Ultracapacitor-Battery Composite Power System for Coal Mine Trackless Rubber Tyre Electric Vehicle Coordinate Control of Electro-Hydraulic Hybrid Brake of Electric Vehicles Based on Carsim The Analysis and Calculation of the Spiral Bevel Gears Transmission System of High-Speed Train The Drive Control System of Micro Logistics Electric Vehicle Electric Machine Technology Needs Analysis of the Linear Motor Vibration Control of the Flexible Robotic Arm through Modal Interaction A CCTV Lens Robot with Four DOFs for Object Searching Parametric Identification for a Free-Floating Base Space Manipulator Covering an Unknown Area with an RFID-Enabled Robot Swarm 3D X-Y-T Space Path Planning for Autonomous Mobile Robots Considering Dynamic Constraints Mobile Robot Obstacle Avoidance Based on Multi-Sensor Information Fusion Technology Object Trajectory Information for Robotic Service in Intelligent Space Medical Tele-Diagnosis Robot (MTR) - Internet Based Communication & Navigation System Modal Analysis of Scraper Chain Industrial Robot System Electronic Nose Based on Conducting Polymers for the Discrimination of Medicinal Plants Chapter 7: Data and Signal Processing A Comparison of Sandbox Technologies Used in Online Judge Systems The Performance Analysis of CDMA Traffic Access Self-Similar Equalization Protocol A Microclimate Monitor Sensor Network with an Effective Data Aggression Algorithm A Fast Feature Matching Algorithm Based on Multi Scale Spatial Segmentation Technology Block-Wise Background Subtraction Based on Gaussian Mixture Models Analysis and Simulation of Meteorological Wind Fields Based on Wavelet Transform A Scalable Distributed System for Multi-User Virtual Environments Research on Natural Ventilation Effect Based on Ventilation Network Model - Case Study of an Office Building in Chongqing, China A Novel Iso-Neigborhood Level Set Framework A LabVIEW Design for Frontal and Non-Frontal Human Face Detection System in Complex Background Bayesian Software Reliability Prediction Based on Yamada Delayed S-Shaped Model Based on Extreme Dynamic Optimization of Mill Load Optimization Algorithm A Motion Image Detection Method Based on the Inter-Frame Difference Method Driver Voice Identification System Using Auto-Correlation Function and Average Magnitude Difference Function Processing Top-N Queries Based on p-Norm Distances Wireless Distributed Data Acquisition System for EIT Due Date Model Build and Analysis Based on Multi-Vendors The Application of Curvelet Transform Method for Regional Gravity Data Analysis of Shock Wave Signals and Calculation of Trajectory Vector in Acoustic Positioning System The Data Link Layer Protocols for Underwater Acoustic Networks Processing Relational Top-N Queries with Text and Numeric Attributes AgCleaning: A Track Data Filling Algorithm Based on Movement Recency for RFID Track Data Research and Improvement on HMM-Based Face Recognition Managing Fragmented Database Replication for Mygrants Using Binary Vote Assignment on Cloud Quorum A Novel Weighted Dynamic Time Warping for Light Weight Speaker-Dependent Speech Recognition in Noisy and Bad Recording Conditions Seismic Data Denoising Simulation Research Based on Wavelet Transform Trajectory Pattern Mining: Methods and Applications Authentication Algorithm Based on Hash-Tree for Web Single Sign-On P300 Feature Extraction of Visual and Auditory Evoked EEG Signal Numerical Analysis of Interaction of Single Pile and Soil Based on ADINA Data Acquisition and Control of Air-Conditioning Systems Based on Virtual Instrument Technology Research and Application of Multi-Dimensional Model in 110 Incidents Data Warehouse Methods of Feature Weighting Calculation and Case Retrieval in CBR Case Base Teleoperated Road Vehicles – The "Free Corridor" as a Safety Strategy Approach On Optimal Constellation Shaping for Wireless MIMO Relay Networks Based on Complex Field Network Coding Hydrocarbon Migration Mechanisms of Hailar - Tamsag Basin Study on Calculation Method of Formation Pressure Using Well Logging Data Towards Real-Time Trinocular Visual Odometry A Prototype of Preliminary Symptom Analysis and Follow-Up Systems for Systemic Lupus Erythematosus Patients An Efficient Stream Cipher WG-16 and its Application for Securing 4G-LTE Networks Numerical Simulation of Controlled Rolling of Heavy Plates with Low Compression Ratio An Online Evaluation Method for Ride Comfort Based on Multivariate Physiological Indicators Chapter 8: Measurement, Monitoring and Testing Technologies A New Kind of Beer Bottle Mouth Defect Recognition Method Based on Vision Measurement of a Single Standing Tree Volume Based on Three-Dimensional Laser Scanner System Calibration Technique for Micro Inertial Measurement Units The Research on the Ultrasonic Focusing and TR Thickness Test Technology Investigate the Method on Measurement Transparence of Tissue Engineered Cornea Research on Location-Based Personalized Recommendation System Evaluation of Chinese Vinegar by Electronic Nose System of Fuzzy Duplicates Detection Parallelism Measurement System of Porous Parts Based on Computer Vision Beam Forming of Lamb Waves for Nondestructive Testing of Plates Research and Application of 3D Digital Detection Technology in Reverse Engineering Study of Portable Shaft Power Measurement System Testing Study on a Kind of Vehicle-Mounted Magnetorheological Retarder Testing Bed Research on an Access Control Model for Radio and Television Monitoring Software Based on T-RBAC Study on the Infrared Radiation Properties of Different Tourmaline Species Fast Circular Object Detection Using Multiscale Grayscale Hough Transform Analysis and Application on Frequency-Response Charateristic Based on Multi-Elements in Near-Surface A Performance Testing Tool for Source Code Numerical Study of Buoyancy-Driven Oil Cluster Jumping in Porous Media by a Dynamic Pore-Network Model Monitoring Heart Rate and Body Temperature Using Wireless Technology (Zigbee) Intelligent Container Based on Thing of Internet Technologies The Comparison among Three Control Charts for Monitoring the Auto Correlated Processes Measurement Method on the Absorption Coefficient of the Material with Large Dimension Based on Two-Microphone The Research of Intrusion Detection Based on Intelligentization Development of the On-Line Straightness Detection System for Shafts Dynamic Tests of Energy Dissipation Structure with Unconsolidated Conical Bearings Biosensing Surfaces Based on Quantum Dots Array Study on the Platform of Visual Producing Technology of Greenhouse by Solar Heat in Winter Based on Information Flow Model Fabrication of a Textile-Based Platform for Rapid Analyte Detection The Framework for Testing of Web Services through Actions in Addition to Scripts Electrochemical Immunochromatographic Strip Test for Melamine Biosensor in Milk Products Using Silver Nanoparticles as Probe Gait Measurement System for the Elderly Using Laser Range Sensor APD-Based Detection Module of Single-Photons in Chemiluminescence Immunoassay System The Study of Baseline Correction Method Using Energy Dispersive X-Ray Fluorescence to Detect Heavy Metals Research on the Whole Condition Loaded Noise Measurement Circuit of Power Capacitor Research on Sitting Transformer Substations in Rural Areas Based on Improved Genetic Algorithm A Data-Driven Method of Engine Sensor on Line Fault Diagnosis and Recovery Research on the Reliability of Distribution Network and its Influencing Factors Bearing Test Research on the Cable Anchorage Zone of the Main Girder of the Xiamen-Zhangzhou Bridge An Autonomous Predicted Star Locations Algorithm for Star Sensor Evaluation on Filter Cleaning Performances Measured by VDI and JIS Testing Rigs for Cleanable Fabric Filter The Automatic Measurement of Complex Surface Based on ZOO-Type CMM A Calibration Method for Binocular Vision System Based on CPSO-BP Netural Network Research and Application of Adaptative Weighted p-Norm LS-SVM Application of Marginal Spectrum in Active Lamb Wave Damage Monitoring of Plate Structure Translate the Stateflow Models into Alloy for Safety Analysis The Settlement Computation of Composite Foundation of Different Typed-Pile Based on the Load Test Application Seismoelectric Method for Inspection Electrically Conducting Media Oil Supply Characteristic Test and Application of Fuel Injection Pump for Diesel Engine Parameter Identification and Attitude Control of Ducted Fan UAVs Identification of Physical Parameters in a Robotized IPC Device Interacting with Human An Optimized RFID Unidirectional Authentication Method Improved AdaBoost Based Infrared Object Detection Algorithm Modbus/TCP Communication Anomaly Detection Based on PSO-SVM Research of Fuzzy Neural Network in the Fault Diagnosis of Numerically-Controlled Machine Tool Identification of Critical Factors to System Performance Using Availability Modeling and Simulation Analysis Driving Control of a Powered Wheelchair by Voluntary Eye Blinking and with Environment Recognition


Best Sellers


Product Details
  • ISBN-13: 9783038263784
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 490-491 Applied Mechanics and Materials
  • ISBN-10: 3038263788
  • Publisher Date: 28 Jan 2014
  • Binding: Digital download and online
  • No of Pages: 1836


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Mechanical Design and Power Engineering: (Volumes 490-491 Applied Mechanics and Materials)
Trans Tech Publications Ltd -
Mechanical Design and Power Engineering: (Volumes 490-491 Applied Mechanics and Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Mechanical Design and Power Engineering: (Volumes 490-491 Applied Mechanics and Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!