Materials Structure & Micromechanics of Fracture VII
Home > Medicine & Health Science textbooks > Medicine: general issues > Materials Structure & Micromechanics of Fracture VII: (Volumes 592-593 Key Engineering Materials)
Materials Structure & Micromechanics of Fracture VII: (Volumes 592-593 Key Engineering Materials)

Materials Structure & Micromechanics of Fracture VII: (Volumes 592-593 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from the 7th International Conference on Materials Structure & Micromechanics of Fracture (MSMF-7), July 1-3, 2013, Brno, Czech Republic. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 186 papers are grouped as follows: Chapter 1: Plenary Keynotes; Chapter 2: Atomistic Studies on Deformation and Fracture; Chapter 3: Deformation and Fracture Models Based on Crystal Defects Behaviour; Chapter 4: Mathematical Modeling Microstructure, Deformation and Fracture; Chapter 5: Multiaxial Deformation and Fracture, Experiment and Modeling; Chapter 6: Nanomaterials: Technology, Properties and Modeling; Chapter 7: Biomaterials: Deformation, Fracture, Modeling; Chapter 8: Surface and Interface Microstructure and Properties; Chapter 9: Advanced Experimental and Theoretical Methods for Microstructure Investigation; Chapter 10: Experimental Studies on the Relation between Microstructure and Mechanical Properties; Chapter 11: Micromechanisms of Fracture and Fatigue (ESIS TC2)

Table of Contents:
Preface Chapter 1: Plenary Keynotes Microscopic Mechanism of Hydrogen Embrittlement in Fatigue and Fracture 3D Studies of Indentation by Combined X-Ray Tomography and Digital Volume Correlation Influence of Microstructure, Environment and Temperature on Fatigue Crack Propagation in 2XXX Aluminium Alloys Analysis of Fatigue Damage Accumulation in TiAl Intermetallics Chapter 2: Atomistic Studies on Deformation and Fracture Atomistic Model Analysis of Local and Global Instabilities in Crystals at Finite Temperature Stress Analysis of Highly Constrained Copper Strips with through Crack Shaped Voids Using Molecular Dynamics Dynamic Stability of Ni FCC Crystal under Isotropic Tension Structural Transformation in Nanowires CuAu I with Superstructure of L10 of Tetragonal Symmetry at Uni-Axial Tension Deformation Structural Response of Metal Crystallite with BCC Lattice on Atomic Level under Nanoindentation Chapter 3: Deformation and Fracture Models Based on Crystal Defects Behaviour Comparison between Pile-Up Singularities and Stress Fields Induced by Thin Slip Bands. Application to the Prediction of Grain Boundary Microcrack Nucleation Planar Defects and Dislocations in C40 and FCC Lattices Thermally Activated Dislocation Motion in an AS21 Alloy and Alloy Reinforced with Short Ceramic Fibres Studied at Elevated Temperatures Deformation and Fracture of a Magnesium Alloy at Elevated Temperatures Thermodynamics of Dislocation Pattern Formation at the Mesoscale Modeling and Experimental Study of Long Term Creep Damage in Austenitic Stainless Steels 3D Discrete Dislocation Dynamics Applied to a Motion of Low-Angle Tilt Boundaries Lattice-Spring Modeling of Graphite Accounting for Pore Size Distribution Non-Planar Dislocations in MoSi2 Deformation and Fracture of Hydrogenated GaSe and InSe Layered Crystals Chapter 4: Mathematical Modeling Microstructure, Deformation and Fracture A Contribution to the Physical Interpretation of the Morphology of Fatigue Fracture Surfaces The Simulation of the Fatigue Fracture Process at Random Loading Numerical Life Estimation of Structure Components Subjected to Hydrogen Embrittlement and Cycling Mathematical Model of Fan-Head Shear Rupture Mechanism Jet Theory in Microstructures Thermodynamically Consistent Model of Damage in Laminated Rocks Micromechanics of Discontinuities and High Porosity Bands Formation in the Unconsolidated Sedimentary Rocks Micromechanical Modelling of Advanced Ceramics with Statistically Representative Synthetic Microstructures Mass-Velocity Correlation in Impact Fragmentation Modelling of Thermal Fracture of Functionally Graded/Homogeneous Bimaterial Structures under Thermo-Mechanical Loading Compression of Heterogeneous Material Systems Based on Wang Tilings Numerical Investigation on the Size Effect of a WC/Co 3D Representative Volume Element Based on the Homogenized Elasto-Plastic Response and Fracture Energy Dissipation Identification of Structural Parameters of Metal Fibre Concrete Using Magnetic Approach Dynamic Recrystallization of the Alloy Fe-40at.%Al-Zr-B Inaccuracy in Residual Stress Estimation and its Influence on the Residual Lifetime of Polymer Pipes Criterion for Crack Kinking out of the Interface of Two Orthotropic Layers Subjected to Thermal and Mechanical Loading The Experimental Study and Numerical Estimation of Fracture Toughness of Heterogeneous Welded Joints Critical Value for Crack Propagation from Sharp V-Notch Strength of an Elastic Plane with a Square Lattice of Circular Holes under External Loading Evaluation of Three-Point Bending Fracture Tests of Concrete Specimens with Polypropylene Fibres via Double-K Model Fracture-Micromechanics Based Model of Mortars Susceptible to Shrinkage Crack Growth Modelling in the Silicon Nitride Ceramics by Application of the Cohesive Zone Approach Temperature Field and Solidification Structure of a Ductile-Cast-Iron Roller The Use of Computer Simulation in the Electronic Packaging Process Numerical Simulation of Damage to Fracture Transition in Metals Based on the Statistical Model of Mesodefect Evolution Application of Multi-Parameter Fracture Mechanics to Study of Crack Propagation Angle in Selected Mixed-Mode Geometry Numerical Model of Plate from Hollow Core Panels with Contact – Target Pairs A Numerical Estimation of Fatigue Crack Tip Plastic Zone Size and Shape under Mixed-Mode Loading Condition Interrelation between Local and Global Characteristics of Cleavage Fracture An Experimental, Numerical and SEM Study of Fracture in a Thin Polymer Film Stochastic Fracture Simulations of Concrete Beams with Shallow Notches Contribution to the Life Prediction of Aluminium Alloys Parts under Isothermal Fatigue Chapter 5: Multiaxial Deformation and Fracture, Experiment and Modeling Damage Mechanics and Critical Plane Approach to Multiaxial Fatigue Modeling of Fatigue Crack Initiation in Wire-Bonds Using a Novel Approach of Strain Gradient Theory Crack Growth Tendency of Surface Shear Cracks in Rolling Sliding Contact Fatigue Crack Propagation in Steels for Railway Axles Calibration of Selected Ductile Fracture Criteria Using Two Types of Specimens Estimation of the Zone of Failure Extent in Quasi-Brittle Specimens with Different Crack-Tip Constraint Conditions from Stress Field Geometry Transferability of Lemaitre's Continuum Damage Mechanics Model in the Plane Stress Specimens Localized Plastic Flow Autowaves and the Hall-Petch Relation for Al On the Correlation of Fracture Quantities in Small Punch Test Influence of the Microstructure on the Fracture Behavior of Carbon Bonded Alumina Mixed Mode Interlaminar Fracture of Carbon Nanotubes Enhanced Epoxy/Glass Fiber Composites Features of Shock-Wave Processes and Fracture in Anisotropic Materials Failure Mechanisms of an AISI 4135 Steel Submitted to the Disk Pressure Test under Helium and Hydrogen Gas Measurement of Residual Stresses around the Notch of Tensile Specimens of the High-Cr Tempered Martensitic Steel F82H-Mod Chapter 6: Nanomaterials: Technology, Properties and Modeling Strength Hierarchy for Nano-Sized Crystals Grain Refinement and Deformation Behaviour of Medium Carbon Steel Processed by ECAP Deformation Mechanisms in Ultrafine-Grained Zn at Different Strain Rates and Temperatures Interface Influence on Dispersion Dynamic of Metal Nanowires under Electric Pulse Loading Details of the Formation of Superstructures in the Process of Ordering in Cu-Pt Alloys Preparing of Silver Nanoparticles by Selective Dissolving of Aluminium Matrix Glass Surface Refining by Deposition of Nano-Particles Chapter 7: Biomaterials: Deformation, Fracture, Modeling Quantum-Mechanical Study of Single-Crystalline and Polycrystalline Elastic Properties of Mg-Substituted Calcite Crystals Porous Magnesium for Medical Applications - Influence of Powder Size on Mechanical Properties Fractographic Analysis of Surface and Failure Mechanisms of Nanotitanium after Laser Shock-Wave Treatment Multiscale Heterogeneity of Bone Microporosities and Tissue Scaffolds Analysis of Compressive Properties of Porcine Temporomandibular Joint Disc Experimental Studies of Elastic Properties of Dental Enamel and Photopolymer Used for early Caries Treatment Mathematical Modeling of Caries Initiation and Progression Occurring in Dental Enamel Evaluation of Developed Texture during Cold-Rolling Deformation of Ti-Nb-Ta-Zr Biocompatible Alloy Recrystallization Temperature Influence upon Structural Changes of 90% Cold Rolled Ti-29Nb-9Ta-10Zr Biocompatible Alloy The Impact of Graphite Source and the Synthesis Method on the Properties of Graphene Oxide Computational Modeling of Porous Ceramics with Bioactive Layer Local Mechanical Properties of Various Bone Cements Chapter 8: Surface and Interface Microstructure and Properties Solute Interaction in Grain Boundary Segregation and Cohesion On the Micromechanisms of Fatigue Crack Propagation in Aluminum Cast Alloys High-Density Ceramic Materials on the Basis of Silicon Carbide Fibre-Matrix Interface Development during High Temperature Exposition of Long Fibre Reinforced SiOC Matrix Estimation of Apparent Fracture Toughness of Alumina Based Ceramic Laminate Siliconizing in a Fluidized Bed Reactor Microstructure-Based Life Prediction of Thermal Barrier Coatings Nanoindentation of Thin Copper Coatings Influence of Low Pressure Plasma Spraying Parameters on MCrAlY Bond Coat and its Microstructure Fatigue Response of Hybrid Ti/APC-2 Nanocomposite Laminates with Single-Edged Cracks Surface Relief Evolution in IN792-5A Nickel Superalloy under High Temperature Fatigue Straining with Hold Times The Changes of Fatigue Properties in Aluminium Cast Alloy during Solution Treatment Characteristics of Duplex Treated AISI 304 Stainless Steel Influence of Localized Structural Defects on the PN Junction Properties Particulate Composite Damage: Numerical Estimation of Micro-Crack Propagation Direction Study of the Influence of Structural Defects on Properties of Silicon Solar Cells Investigation of the Mechanical Properties of Lead-Free Solder Materials Photo-Reflective Layer on Low Temperature Co-Fired Ceramic for Optical Applications Degradation of TBC Coating during Low-Cycle Fatigue Tests at High Temperature Assessment of the Unstressed Lattice Parameters for Residual Stresses Determination by Neutron Diffraction in Engineering Materials The Influence of Long-Term Heat Treatment on Microstructure of Zr-Modified Aluminide Coating Deposited by CVD Method on MAR M200+Hf Nickel Superalloy Thermal Analysis of Halide Activator Used in Aluminizing of TiAl Intermetallics The Effect of Long-Term Annealing on Microstructure of Aluminide Coatings Deposited on MAR M200 Superalloy by CVD Method Chapter 9: Advanced Experimental and Theoretical Methods for Microstructure Investigation Complex Metallic Alloys – Microstructure Characterization Kinetics of Deformation Processes in a High-Alloy Cast TWIP Steel Determined by Acoustic Emission and Scanning Electron Microscopy Microscopic Strain and Crystal Rotation Measurement within Metallurgical Grains Advanced Microstructure Studies of an Austenitic Material Using EBSD in Elevated Temperature In Situ Tensile Testing in SEM A Comparative Study on Infrared Thermography during Ultrasonic Fatigue Testing of Cast Steel 42CrMo4 and Cast Aluminium Alloy AlSi7Mg Quantification of Liver Microcirculation Using X-Ray Microtomography of Vascular Corrosion Casts Experimental Study of Defect Induced Temperature Evolution in Polycrystalline Metals Effect of Heat Treatment on Formation of Al-Al3Ni Hypereutectic Alloys Formation of Structurally Complex U-Phase in Al72Pd12.8Co15.2 Alloy Using Acoustic Emission in Fracture Monitoring of Cementitious Composites Influence of the Surface Treatment of Tubes on the Heat Transfer in Low Pressure Atmosphere Experimental Studies of Excess Noise Sources in Concrete Based Materials as a Limiting Factor for Electromagnetic Emission Measurement Mechanical Induced Defects and Fractures in the Silicon Solar Cell Structure Comparing the Properties of Polypropylene Fibers Contained in Ordinary and Lightweight Concrete Using Three-Point Bending Tests with Stress Concentrator and Acoustic Emission Method A FPGA-PC Based Acoustic Emission System with Logarithmic Preamplifier for Fracture Monitoring Monitoring of the Damage in Stone Blocks by Means of Non-Destructive Methods Detection of Inhomogeneities and Cracks in Composite Materials by the Method of Partial Discharges Study of Initial Stages of Fatigue Process Using Non-Destructive Testing Methods Microstructural Investigations of Nickel-Based Superalloys with Different Structure Chapter 10: Experimental Studies on the Relation between Microstructure and Mechanical Properties Advanced 3D Packaging of Chips and Materials Integrity: Stress-Induced Effects and Mechanical Properties of New Ultra Low-k Dielectrics for On-Chip Interconnect Stacks Fracture of Irradiated Austenitic Stainless Steel with Special Reference to Irradiation Assisted Stress Corrosion Cracking The Effect of Radiation-Induced Structural Changes under Accelerated Irradiation on the Behavior of Water-Cooled Reactor Pressure Vessel Steels Intergranular Embrittlement of Nuclear Reactor Pressure Vessel Steels Influence of Morphology of Deformation Induced α´-Martensite on Stress-Strain Response in a Two Phase Austenitic-Martensitic-Steel Microstructure-Related Scratch Resistance and Indentation Creep Behavior of PA6 and PA6 Nanocomposites Damage and Fracture Behaviours in Aged Austenitic Materials during High-Temperature Slow Strain Rate Testing Structural and Fatigue Properties of Titanium-Steel Bimetallic Composite Obtained by Explosive Welding Technology Structural Modifications of the Aluminium Alloy in Conditions of Additional Shock Impulse Load Influence of Cooling Rate on Final Properties of Laboratory Rolled Products Extrapolation of Sigmoidal Creep Curve by Strain Acceleration Parameter Determining Elastic-Plastic Properties of Al6061-T6 from Micro-Indentation Technique Production of Al Metal Matrix Composites by the Stir-Casting Method Elastic Properties of Porous Alumina, Zirconia and Composite Ceramics Standing Contact Fatigue Analyse of Steels with Different Microstructures High Temperature Fatigue Strength and Quantitative Metallography of an Eutectic Al-Si Alloy for Piston Application Effects of Different Microstructure on Resistance of EA4T Railway Axle Steel of Equal Strength to Fatigue Crack Growth Investigation of the Microstructure Factors Affecting the Brittle Fracture Initiation of Pre-Cracked Charpy-Type Samples of VVER-1000 RPV Steel Microstructure and Mechanical Properties of Rapidly Solidified Al-Fe-X Alloys Heat Treatment Effects on Static and Dynamic Mechanical Properties of Sintered SINT D30 Powder Metal Influence of the Composition of Cement Mortars Modified by Lime or Polymers on the Mechanical Properties and Microstructure of Mortars Influence of Fly Ash on Abrasion Resistance of Concretes with their Additions Relation between Microstructure and Tribological Properties of High Density Polyethylene Hybrid Composites Filled with Untreated Glass Spheres, Talc and Calcium Carbonate Influence of Heat Treatment on Crack Tip Opening Displacement and on Resistance of Crack Propagation of Alloyed Steel Autowave Features of Plastic Deformation by Ductile Fracture Effect of Adding Graphite Powder to a UP Polymer on Friction and Wear for Different Loads and Rubbing Speeds Mechanical Behavior of Steel-Chips-Reinforced Concrete Acoustic Emission from Quasi-Brittle Failure of Cementitious Composites - Experimental Measurements and Cohesive Crack Model Simulations Influence of Heat Treatment of High-Speed Steel on its Microstructure, Hardness and Fracture Toughness Fatigue Characteristic of Aluminium Alloy 2024 under Cyclic Bending with the Controlled Energy Parameter Microstructure and Defects Evaluation of Varistors by Ultrasonic Waves in Low Frequency Range Influence of the Titanium and its Alloys Microstructure on the Fatigue Crack Paths High-Temperature Elastic Properties of Ceramics in the System MgO-Al2O3-SiO2 Measured by Impulse Excitation Thermal Effects while Fatigue Cracking Growth under Bending Influence of the Microstructure near the Interface on the Fatigue Life of Explosively Welded (Carbon Steel)/Zr Clads Microstructural Aspects of Low Cycle Fatigue of Aged GX12CrMoVNbN9-1 Cast Steel Fatigue Fracture of Turbine Blades: Case Studies Bending Fatigue Behaviour of Diffusion and Thermal Barrier Coating Systems Nanoindentation and Microstructural Study of Cu-Co Alloys after Severe Plastic Deformation Mechanical Aspects of Plastic Deformation of Nickel Based Superalloy Relations between Microstructure and Mechanical Properties in Laminated Ti-Intermetallic Composites Synthesized Using Ti and Al Foils Chapter 11: Micromechanisms of Fracture and Fatigue (ESIS TC2) Fatigue Cracking and Acoustic Emission Regularities in Metals: Crack Origination and Growth Deformation Behaviour of Asymmetrically Fatigue Cycled Metallic Materials An Effect of the First Non-Singular Term of the Williams Asymptotic Expansion to the Stability of the Bi-Material Orthotropic Notch Fatigue Crack Growth of Thin Wall Magnesium AZ91 Alloy Cast Short Crack Growth Behavior in Ferrite-Bainite Dual Phase Steels A Discrete Model for Diffusion-Induced Grain Boundary Deterioration Role of Microstructure on Fracture Behavior of T91 Steel in Presence of Liquid Sodium Transition from Straight to Fractal Cracks due to Projectile Penetration The Effect of Temperature on the Course of Refractory Castables Cracking Temporal and Spatial Evolution of Bursts in a Fiber Bundle Model of Creep Rupture PSBs and Non-Propagation of Small Surface and Interior Cracks in Polycrystalline Copper The True Shape of Persistent Slip Markings in Fatigued Metals Slip Activity of Persistent Slip Bands in early Stages of Fatigue Life of Austenitic 316L Steel Propagation of Fatigue Cracks in Notched Specimens of EN AW 7475-T761 Trajectory and Crystallography of Crack Growth in Austenitic Steel after LCF Tests Experimental Investigation of Modes II and III Fatigue Crack Growth in Unalloyed Titanium Complex Evaluation of Fatigue Tests Results of Plain C30/37 and C45/55 Class Concrete Specimens Magnesium AZ91 Alloy Cast Mechanical Properties Measured by the Miniaturized Disc-Bend Test The Role of Second Phase Intermetallic Precipitates in Fatigue Fracture Mechanism for Aluminum Alloy AW 7075


Best Sellers


Product Details
  • ISBN-13: 9783038263159
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 592-593 Key Engineering Materials
  • ISBN-10: 303826315X
  • Publisher Date: 15 Nov 2013
  • Binding: Digital download and online
  • No of Pages: 840


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Materials Structure & Micromechanics of Fracture VII: (Volumes 592-593 Key Engineering Materials)
Trans Tech Publications Ltd -
Materials Structure & Micromechanics of Fracture VII: (Volumes 592-593 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Materials Structure & Micromechanics of Fracture VII: (Volumes 592-593 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!