Buy Material and Manufacturing Technology IV - Bookswagon
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Book 1
Book 2
Book 3
Home > Science, Technology & Agriculture > Technology: general issues > Engineering: general > Material and Manufacturing Technology IV: (Volume 748 Advanced Materials Research)
Material and Manufacturing Technology IV: (Volume 748 Advanced Materials Research)

Material and Manufacturing Technology IV: (Volume 748 Advanced Materials Research)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Collection of selected, peer reviewed papers from the 2013 4th International Conference on Material and Manufacturing Technology (ICMMT 2013), May 11-12, 2013, Seoul, South Korea. The 251 papers are grouped as follows: Chapter 1: Advanced Materials Engineering and Technology; Chapter 2: Advanced Mechanical Engineering and Design Technology; Chapter 3: Power System and Energy Engineering; Chapter 4: Instrumentation, Measurement and Testing Technologies; Chapter 5: Signal and Data Processing, Data Mining; Chapter 6: Mechatronics and Robotics Technology; Chapter 7: Modern Control and Automation Engineering; Chapter 8: Electronics and Integrated Circuits, Embedded Technology; Chapter 9: Information Technologies, Communication and Networks; Chapter 10: New Technologies and Methods in Civil Engineering and Environment; Chapter 11: Organization of Production and Engineering Management.

Table of Contents:
Preface, Committees and Sponsors Chapter 1: Advanced Materials Engineering and Technology Numerical Simulation of Detonation in Fine Aluminum-Oxygen Mixtures with Hybrid Combustion Model Surface Integrity and Cutting Temperature in Machining of Biomedical Magnesium Alloys an Overview Flexural Strength of PLA/Kenaf Green Composite Aging Behavior of the Polyether Polyurethane Films Irradiated by UV Spray Pyrolysis of Metal Oxides SnO2 and In2O3 as an Example of Thin Film Technology: Advantages and Limitations for Application in Conductometric Gas Sensors Consolidation of 2124 Aluminum Alloy – Carbon Nanotube Reinforced Metal Matrix Composites Influence of Ar Pressure on Product Characteristics of Self-Propagating High-Temperature Synthesis from WO3/B2O3/Al Reactant System Synthesis of Fe-Al2O3 Composite by High-Frequency Induction-Heated Combustion Effect of Dispersants Pre-Adsorption and Grinding on Dispersion Performance of Kaolin Pigment Self-Propagating High-Temperature Synthesis of Fe-W(B, C) Based Composite Electrochromic Performance of NiO Films in Alkaline Medium Development of SiO2 Nanolubrication System for Better Surface Quality, more Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140 Effect of Screw Rotation Speed on Mechanical Properties of Extruded PLA/Kenaf Nanocomposites Ruderman-Kittel-Kasuya-Yosida Magnetic Interactions in Chemically Synthesized Zn-Fe-AlO Nanocrystallites Photoluminescence Investigation of Dy3+ Ions in Bi2O3-B2O3 Glasses Fabrication and Reinforcing Mechanism: In Situ Grown Carbon Nanotube Reinforced Carbon/Carbon Composites with High Interlaminar Shear Strength Effect of the Annealing Treatment on the Microstructure, Microhardness and Corrosion Behaviour of Al0.3CrFe1.5MnNi0.5 High-Entropy Alloys Oxidation of Oxide Dispersion Strengthened Steels: I. Influence of Alloy Composition Dielectric Property of Si3N4/SiBCN Composite Ceramics Doped with SiC Optimization of Parameters in Fiber Reinforced Polyurethane Composited Reaction Injection Molding Synthesis and Characterization of NIR Luminescent LaF3:Ln3+ Nanoparticles and their Transparent Epoxy Nanocomposites Oxidation of Oxide Dispersion Strengthened Steels: II. Kinetics and Mechanism Study on the Foaming Behavior of PS-CO2 by Using Water or Ethanol as Co-Blowing Agent Structural and Optical Behavior of nanoCe2(SO4)3, CeF3 and CePO4:Tb3+ Composites Embedded in PVOH Matrix The Metastable Phase Responsible for Hardenig in an Al-Mg Alloy Aged at 473K Investigations of Nanostructure and Photoluminescence Properties of Nanoporous Silicon Characterization of High Density Solid Waste Biopolymer Foam Controlling the Ferrite/Austenite Phase Balance of SAF 2707HD Hyperduplex Stainless Steel Weldment Effect of Applied Current Density on the Electrodeposition of Ni on Ti Substrate Morphology and Mechanical Properties of HDPE/Bio-Polymer as Compounding Materials Antimicrobial and Physical Properties of Chitosan Film as Affected by Solvent Types and Glycerol as Plasticizer Thermal Conductivity of Akar Bamboo (Dendracalamus pendulus) and Semantan Bamboo (Gigantochloa scortechinii) Mechanical Properties of UV Irradiated Bio Polymer Thin Films Doped with Titanium Dioxide Adhesive Bonding Strength and Adhesive Penetration of Two Malaysian Medium Hardwoods Optimal Conditions of Electrostatic Spray Deposition (ESD) for Composite Biomaterials Coating for Biomedical Applications A Novel Approach for Bone Scaffold from Oil Palm Empty Fruit Bunch-Cellulose Phosphate / Glass Material Research Development of the Laser Surface Modification to Improve the Corrosion-Resistance of Titanium and Titanium Alloys Research Progress of the Surface Oxidation of Titanium and its Alloys Development Status of Laser Clad Cobalt-Based Alloy Coatings AlPO4-Modified Silicate Glasses as a Fertile Source for Crystallization of Various Technically Favorable Minerals Effects of Kenaf and Rice Husk on Thermal Properties of Kenaf/CaCO3/HDPE and Rice Husk/CaCO3/HDPE Hybrid Composites Effect of Epoxidized Palm Oils Loading on the Crosslink Density and Rebound Resilience Characteristic of SBR Vulcanizates Effects on Tensile and Morphology Properties of Casuarina equisetifolia Reinforced Unsaturated Polyester Composites Effect of Anodizing on Strength of Carbon-Fibre Aluminium-Laminated Composites Mechanical Properties Improvements of Resin-Based Nanocomposites Reinforced by Multi-Walled Carbon Nanotubes Application of the High Strength Steel in the Automobile Effect of Crack Length on Mixed-Mode Cohesive Fracture of the Adhesively Bonded Joints The Evaluation of Mould Made from Aluminium and Mild Steel for Polypropylene Integral Hinges Test Samples Strength and Folding Performance of Polypropylene Packaging Samples in Hot Air and High Humidity Condition A Case Study on Effect of Feed Rate on Machinability of Austempered Ductile Iron Grinding Force Research on Nanostructured Ceramic Coatings Blow Forming of Steel and IN718 for Propulsion Components Research on Nano-Ceramic Coatings Precision Grinding Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling CO2 Laser Cladding of Mild Steel Using Iron Based Powder and Silicon Carbide Particles Optimization of Process Parameters of Rotary Ultrasonic Machining Based on Taguchis Method Acoustic Study Based on Sustainable Green Polymer Treated with H2O In Situ Transesterification of Vegetable Oil for Biodiesel Production via Ultrasound Clamp on Tubular Reactor as an Environment Sustainable Manufacturing Process Dynamic Response of FDM Made ABS Parts in Different Part Orientations Research on Kinetics of Hydrolysis Preparation of Micro-Molecular Dextran Scaling up Process Output of Monomer Reactor Characterization of Rice Straw Ash and Utilization in Glass Production Investigation on Carbon Fiber Composites as Architectural EMI Shielding Material Durability of Traffic Signs and Retroreflective Materials Performance Study on Scale Inhibition of Biodegradable Water Treatment Agent Chapter 2: Advanced Mechanical Engineering and Design Technology Simulation of Laser-Induced Thermoelastic Behavior in Metal Plates Assessment in Screw Fixing Damages of Particleboard Surface: Difference in Screw Head and Self-Drilling Features The Analysis of Feeding Crossbeam on the Automatic Aluminous-Winding Machine The Higher Order Crack-Tip Field for Reissner's Bidirectional FGMs Spherical Shell Stress Analysis and Fatigue Life Estimation of Bridge Rubber Bearing Optimization Design of a Framework for an Infrared Seeker The Higher Order Crack-Tip Field for Reissners Power FGMs Spherical Shell Impact of Cervical Artificial Disc Implantation on the Biomechanical Function of Adjacent Segments A Z-Map Based Approach for Extracting the Groove Shape of Impeller Development and Application of CAE Automatic System Based-On Tcl/Tk Efficient Surface Segmentation Algorithm for 3-Axis Machining with a Ball-End Cutter Philoponus' Comments to Aristotle's Physics as the First Step to the Development of Modern Laws of Motion Dynamic Performance Analysis of Locomotives Based on the Matching between Worn Wheel-Rail Profiles An Efficient Diffusion Model for a Real-Time Gas Diffusion Simulation System The Hydraulic Tong in Workover Operations and the Modification to the Design of Gaps Alignment Technique Design and Simulation on Righting Manipulator of the Remote Control in Workover Operations Lightweight Design Optimization of Large-Tonnage Hydraulic Press Body Structure Prediction of Long-Term Properties of Fiberglass Pipe Based on the Shift Factors Method The Analysis of Pipeline’s Penetration Laid on the Elastic-Plastic Seabed Based on the ABAQUS Software Nonlinear Aerodynamics Reduced-Order Model Based on Multi-Input Volterra Series Analysis of Vibration Characteristics Basing on a Multi-Rigid Suspension Model and a Multi-Flexible Suspension Model Positive Solutions of a Strongly Coupled Prey-Predator System Chapter 3: Power System and Energy Engineering Algorithm and Realization of Wind Power Prediction System Comparison of Feedback Loop Control Schemes for Inverters in Microgrids The Study of Ferromagnetic Resonance Overvoltage and its Suppression Methods in 35kv Power System An Improved Islanding Detection Method for Photovoltaic Grid-Connected System Optimization on Resource-Constrained Multi-Project Scheduling of Electric Multiple Unit Overhaul Contrast Analysis of Solar Energy Water Heating System in the South and North of China Switch Technology in Intelligent Substation Research on Neutral-Point Balancing for Three-Level Space Voltage Vector Converter Distribution System Voltage Regulation with Distributed Generation Based on VQC and SVC Study on Energy Optimization of Clutch Based on Energy Design Factor Analysis of Technology Development Trend of the Wind Power Generation-Based on Patent Map Cluster Analysis System and Method Modeling the Multiobjective Optimization of Electricity Consumption for Residential Consumers A Combination Method for Mid-Long Term Power Load Simulation and Prediction Study of Dual-Active Series Resonant DC-DC Converter for High Power Applications Capacitor Group Zero-Crossing Switching Control System Design Continuous PWM Modulation Strategy for NPC/H and H Bridge Hybrid Multilevel Converter Chapter 4: Instrumentation, Measurement and Testing Technologies Research and Design of Air Conditioning Air Flow Test Bench Design the CCD Tablet Thickness Measurement System Based on Laser Triangulation Method Mono Pulse Confocal Microwave Imaging in Breast Cancer Detection Development of Correlative Investigation Technique (CIT) of Human Performances in Specific Conditions of Postural Malfunctions Assisted Analyze of the Extenics Dependent Functions in 1D, 2D, 3D and nD Dimensions with LabVIEW Instrumentation Investigating the Effects of Injection Moulding Process Parameters on Multiple Tensile Characteristics of Plastic Spur Gear via Experimental Approach Two-Dimensional Laser Detection Front End Circuit and Algorithm Detection of Pilot-Induced Oscillation (PIO) Node Localization Technology in Wireless Sensor Networks for Coal Mine Security Monitoring Based on GPS RTK Technology in Open Pit Mine in the Measurement of the Application Research Real Time Web Based Monitoring and Calibration System for Diesel Engine A Safety Monitoring Device for Firefighters Based on Wireless Localization Algorithm Chapter 5: Signal and Data Processing, Data Mining The Dividing Frequency Bands Prediction Method Based on Bornitz Model for Train-Induced Environmental Vibration and its Application Garlic Cutting Umbilical Based on Image Processing and GUI Clustering Based on a Novel Density Estimation Method Analysis Based on the Remote Sensing Image of Harbin Urban Heat Island Effect The Research on Multiscale Image Fusion Based on the Dualtree Complex Wavelet Signal Analysis on Nasal Consonant Based on Nasal Flow Signal Gesture Recognition for Briefing Application Optimization Algorithms Used in Reservoir History Matching Method on 3D Dense Point Cloud Recovery of Geographical Scene A Multi-Gradation Stereo Matching Method Based on Edge Feature Points Implementation of Unitary Music Algorithm Using Xilinx System Generator Sound Source Localization Based on Microphone Uniform Linear Array Variable-Number Differential Evolution and its Application on Uranium Ore Classification Method of Harmonic Detection Based on the Wavelet Transform A Fuzzy Clustering-Based X-Ray Computed Tomography Simulation under Incomplete Measurements An Image Reconstruction Simulation Based on Prior Information for the Pulmonary Electrical Impedance Tomography Research and Simulation of Image Histogram Matching Based on HMM Intonation Prosody Prediction of Tibetan TTS Does Complex Metaheuristic Out-Perform Simple Hill-Climbing for Optimization Problems? A Simulation Evaluation The Application of CRI Method in Fuzzy Reasoning Fuzzy Recognition Intelligent System Based on Cash Character Chapter 6: Mechatronics and Robotics Technology The Research and Development of Automotive Switches Test System Based on LabVIEW The Perception System of External World for Robot A Robot Simulation System for Self-Location by Using Field Visual Information Design of Obstacle Avoidance Detection Based on Substation Intelligent Inspection Robot Study on Design Proposal of Computerized Numerical Control Machine Networking A Linear Camera Calibration Applying in Servo Mechanical Arm System with One Camera Sound Analysis and Synthesis for Audio Simulation System of Flight Simulator Research on the Vision Processing of Space Robot's Tracking Camera Highly Scalable Flight Control Architecture for Small Autonomous Helicopter Using PC104/ARM Technology The Design of Servo System for Azimuth of Directional Antenna Based on PMSM Unmanned Helicopter Course PID Controller Parameters Setting and Simulation Application of Sliding Mode Cascade Controller in AC Servo System Modal Analysis of Permanent Magnet Synchronous Motor of Electric Vehicles Study of the Force Transferring Model Considering Wheel-Rail Interaction of EMU Airborne Integrated Vision/Inertial Navigation System for Landing on Aircraft Carrier Research on the Detection Unit and Control System of CNC Cool Frame Bender Theoretical and Experimental Study of the Human Upper Limb Dynamic Behavior Fabrication of Ultrasound-Gravity Field Flow Fractionation Devices Using Engraving Machine and Reliable Sealing Method Chapter 7: Modern Control and Automation Engineering Optimization of Satellite Momentum Wheel Control System Based on Genetic Programming Short-Term Traffic Flow Forecasting of Intersection Based on Approximate Dynamic Programming Semistability of Nonlinear Control Systems Robust H∞ Control for Singular Networked Control Systems with Uncertain Time-Delay Optimal Excitation Control System of Synchronous Generator in Big Disturbance Based on Improved LOEC Mode The Study of DC Motor Position Controller Parameter Setting and Simulation PI Controller Design for Temperature Control of Reheating Furnace Walking Hearth Type in Setting up Process Development and Application on Intelligent Sub-Station of Automatic Production Line Based on the STC12C5A60S2 MCU Solar Energy Automatic Tracking System Based on Plane Normal Vector Control Research With DGPS-RTK Terminal Yard Cranes Real-Time Operating System Temperature Controller of Heating Furnace Based on Fuzzy Neural Network Technology Chapter 8: Electronics and Integrated Circuits, Embedded Technology Design of Direct Digital Synthesizer Based on FPGA A Dual-Mode MPPT Algorithm Based on the Golden Section Point of the PV System Incremental Circuit and Sensitivity Simulations Using Iterated Timing Analysis Algorithm A Study for Embedded Software Double-Fault Testability A 100-MS/s CMOS Sample-and-Hold Circuit with Input Common Mode Feedback Design of the High-Speed High-Resolution Latched Comparator Design of a Novel Excitation Circuit for Low Perming Error Fluxgate Simulation of an AlGaN/GaN HEMT for Ka-Band An Improved Data Weighted Averaging for Segmented Current-Steering DACs Design of SDH Positive/Zero/Negative Justification Circuits Based on FPGA Chapter 9: Information Technologies, Communication and Networks Distribution Network and Multiple Power Bi-Level Programming Important Position of Information Science in Studying Complex System Study on Dynamic Services Composition of Web Services Based on BPEL The Research on Information Sharing in Supply Chain and its Information Sharing Entities Net-Tree: A Novel Self-Organizing Topology for Wireless Sensor Networks Security Research and Measures for the Internet of Things An Improved Routing Technology Based on Ant Colony Algorithm for Indoor Building Environment Effect of Distance on the Maximum Data Transfer for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System Critical Evaluation on Steganography Metrics Efficient Scratchpad Memory Management for Mobile Multimedia Application A Tiny Development Platform with Virtualized Peripherals for Education of Embedded Software Design Modeling and Simulation of FC-AE-ASM Network Implementation of Vehicle Control System Based on IPV6-CAN Gateway The Research of Electronic Payment Platform Based on Public Key Infrastructure A Provably Secure E-Cash Scheme with Loss-Tracing A Note on Optimal Function for Similarity Measure in Ontology Application An Adaptive Tabu Search Method for Optimizing Procurement Plans under Correlated Demands Simulation for Generate Efficient Evaluation Plans with Materialized Views Energy Guided and Workload Adaptive Modeling for Live Migration Research on the Synthetically Quantitative Evaluation System of Ecological Environment Quality of the Water Conservancy and Hydroelectric Power Project Impulsive Synchronization of GREY-SCOTT System with the Cross-Diffusion Effect A Research on Real-Time Hand-Detection Technology Oriented to the Somatic Games A Simple Multi-Models Rendering Framework - PM-OCMMRF Based on Time-Delay and Bandwidth Relay Selection Algorithm for Radio and Television Services System Design Considerations for Satellite Communications on the Move Formal Model of Classic Operating System Kernel An Identity on Resistance Distances Simulation for View Selection in Data Warehouse Design of a Savant Subsystem of EPC and Implementation on Intelligence Characteristics of a Savant Based on Agent Lessons Learned from Design and Development of Military Scenario Definition Language Scenario Editing Toolset A Low-Complexity Algorithm of Joint Multiple Frequency Offsets and Channels Estimation in Cooperative Relay Systems Supervised Multidimensional Scaling for Ontology Similarity Measure and Ontology Mapping via Multi-Dividing Internal Cloud Storage Architecture Implemented in Crop Germplasm Resources Data HLA Based High-Performance Visualized Simulation with MATLAB Seamlessly Embedded Chapter 10: New Technologies and Methods in Civil Engineering and Environment Research on Hygroscopic Material Improving Moist Environment of Building Underground Layer Analysis of Precast Piles for Piling Process Preparation and Verification of a Limit Protective Isolation Structural Analysis Programs Numerical Analysis of Back Berm on Road Engineering with FEM Analysis on the Location Change of Taoist Architecture - A Case Study of Shanxi Taoist Buildings Study on Hydraulic Characteristics of the Dragon-Raise-Head Spillway Tunnel Research on Seismic Exploration Techniques in Complex Lithologic Oil Filed Exploration Stability Analysis of Large Underground Station Based on Coupled Fluid-Solid Theorem Experimental Research on Settlement Distribution of Composite Foundation Configured with Walled Soil Improvement Corrosion Behavior of Steel Structure Residences under Atmospheric Condition in Dujiangyan - A Year Experimental Summary 3D Modeling of Underground Geological Park Based on Terrestrial Laser Scanner Design and Development of Low Cost Certified Green Building for Non Residential Existing Building (NREB) Smart City - A New Mentality for Resource-Based Cities’ Sustainable Development Research of Sheet Metal Parts Library Construction and Unfolding Method Based on Pro/ENGINEER Developing Digi-Mechanical Formwork for Construction in Environments of Displacement Mechanism of Manufacturing and Adoption of Nanomaterials in Contemporary Architectural Project of Developing Countries The Tracer Experimental Method for Determining Longitudinal Dispersion Coefficient of Nature River Research of Cascade Reservoirs Flood Limit Level Dynamic Control Based on Game Theory Study on the Geological Disasters of Heap Leaching Field and the Prevention of a Copper Mine in Inner Mongolia Hydrologic and Hydraulic Analysis of City Flood Control Study on Decomposition and Decision Simulation System for Carbon Intensity Target Reduction The Technology of Remote Sensing and its Application to Terrestrial Ecosystem Restoration Chapter 11: Organization of Production and Engineering Management Assembly Line Balancing in Manufacturing Processes: Using Simulation Model The Property of Hierarchical Structure in Manufacturing Tools Management Solution for Small Enterprises AHP Approach for Material Management Operation in a Cutting Edge Electronics Design Manufacturing Company Production System Improvement by Integration of FMEA with 5-Whys Analysis Preventive Maintenance Checklist towards Effective Maintenance System: A Case Study in Semiconductor Industry Safety Assessment of Subway Station Operation Based on Grey Clustering Method The Study and Application of Workflow Management System Based on Multi-Role Playing Production Control Strategy and its Parameters Optimization for a Two-Stage Production System The Selection of Agile Development's Effort Estimation Factors Based on Principal Component Analysis Rapid Vehicle Scheduling for Emergency Personnel Evacuation in Disaster Rescue PLC-Based Laboratory Intelligent Management System Analysis and Suggestions for the Development of Vehicle Ro-Ro Transportation in the Chuanjiang River Research on Oil Depot Safety Evaluation Based on Dow Chemical Fire and Explosion Index Assessment Method Investigation on Safety Condition of Cell Phone Charging Grey Relational Analysis Model for Comprehensive Evaluation on Risk Early-Warning for Enterprises Investment Project The "U-Type" Wells History of Fuzzy Ball Drilling Fluids for CBM Drilling in China Analyzing Crash Frequency by Collision Type at Freeway Diverge Areas Study of Logistics Warehouse Management System Based on RFID Research on Urban Rail Transit Resource Allocation Based on K-Shortest Paths Algorithm


Best Sellers


Product Details
  • ISBN-13: 9783038261339
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 748 Advanced Materials Research
  • ISBN-10: 3038261335
  • Publisher Date: 30 Aug 2013
  • Binding: Digital download and online
  • No of Pages: 1360


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Material and Manufacturing Technology IV: (Volume 748 Advanced Materials Research)
Trans Tech Publications Ltd -
Material and Manufacturing Technology IV: (Volume 748 Advanced Materials Research)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Material and Manufacturing Technology IV: (Volume 748 Advanced Materials Research)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    Fresh on the Shelf


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!