The Current State-of-the-Art on Material Forming
Home > Mathematics and Science Textbooks > Science: general issues > Nanosciences > The Current State-of-the-Art on Material Forming: (Volumes 554-557 Key Engineering Materials)
The Current State-of-the-Art on Material Forming: (Volumes 554-557 Key Engineering Materials)

The Current State-of-the-Art on Material Forming: (Volumes 554-557 Key Engineering Materials)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). The collection of 282 peer reviewed papers aims to promote the interest for all types of materials and all topics connected to Material Forming. The papers are grouped as follows: Chapter 1: Formability of Metallic Materials Chapter 2: Forging and Rolling; Chapter 3: Composites Forming Processes; Chapter 4: Semi-Solid Processes; Chapter 5: Light Weight Design and Energy Efficiency in Metal Forming; Chapter 6: New and Advanced Numerical Strategies for Material Forming; Chapter 7: Extrusion and Drawing; Chapter 8: Friction and Wear in Material Processing; Chapter 9: Nano-Structured Materials and Microforming; Chapter 10: Inverse Analysis Optimization and Stochastic Approaches; Chapter 11: Innovative Joining by Forming Technologies; Chapter 12: Multiscale & Continuum Constitutive Modelling; Chapter 13: Incremental and Sheet Metal Forming; Chapter 14: Sheet-Bulk-Metal Forming; Chapter 15: Heat Transfer Modelling; Chapter 16: Structures, Properties and Processing of Polymers; Chapter 17: Non-Conventional Processes; Chapter 18: Machining and Cutting; Chapter 19: Integrated Design, Modelling and Reliability Assessment in Forming (I-DMR); Chapter 20: Finite Element Technology and Multi-Scale Methods for Composites, Metallic Sheets and Coating Models; Chapter 21: Intelligent Computation in Forming Processes.

Table of Contents:
Preface Chapter 1: Formability of Metallic Materials Transient Negative Strain Hardening during Severe Plastic Deformation of Al-30wt%Zn Alloys Correlation of Tensile Test Parameters and Bendability of High-Strength Steels Formability of Hybrid Aluminum-Magnesium Compounds Analysis of the Deformation Behavior of Ti-6Al-4V at Elevated Temperatures Accurate Evaluation Method for the Hydraulic Bulge Test A Cruciform Shape to Study the Influence of Strain Paths on Forming Limit Curves Ductile Failure Modelling in AA5182 Aluminium Alloy Sheet Forming Hot Tensile Behavior of Superplastic and Commercial AA5083 Sheets at High Temperature and Strain Rate Crystal Plasticity Finite-Element Simulation of Deformation Behavior during Unloading under Compression in Magnesium Alloy Sheet Achieving High Strains in Sheet Metal Characterization Using the In-Plane Torsion Test Joint Strength of SPCC/A5052P-H Joint Welded by Laser Butt Welding with Compression Numerical Modeling of Ductile Plastic Damage in Tensile Test Influence of Dislocations on the Deformability of Metallic Sheets Ductile Damage in Tension and Bending for DP980 Steel Sheets On the Influence of Cold Rolling Parameters for 14CrW-ODS Ferritic Steel Claddings A Theoretical Study of the Effect of the Double Strain Path Change on the Forming Limits of Metal Sheet Material Modeling of High Strength Steel Sheet Using Multiaxial Tube Expansion Test with Optical Strain Measurement System Stress Relaxation for Formability Improvement Effect of Material Model on Finite Element Modeling of Aerospace Alloys Submicrocristalline Structure and Dynamic Recovery of Cold Flowformed ELI Grade Ti-6Al-4V Prediction of Surface Roughening and Necking Behavior for Metal Foils by Inhomogeneous FE Material Modeling Design of an Experimental Device for Biaxial Tension Tests Used in a Uniaxial Test Machine Determination of Flow Curve Using Bulge Test and Calibration of Damage for Ito-Goya Models Deep Drawing of Ti6Al4V: Experiments and Modeling over a Wide Range of Strain Rates and Temperatures Analysis of the Incremental Forming of Titanium F67 Grade 2 Sheet Effect of the Mechanical Parameters Used as Input Data in the Yield Criteria on the Accuracy of the Finite Element Simulation of Sheet Metal Forming Processes Chapter 2: Forging and Rolling On the Development and Identification of Phenomenological Damage Models - Application to Industrial Wire Drawing and Rolling Processes Optimization Analysis of A7075 Bicycle Stem Forging Process Sensitivity Analysis to Optimise the Microstructural Properties of an Inconel 718 Component Manufactured by Rotary Forging Application of a Fast Calculation Model for the Process Monitoring of Open Die Forging Processes Application of Combined Casting-Forging Process for Production of Durable Lightweight Aluminum Parts Effect of Different Finish-Rolling Parameters on the Microstructure and Mechanical Properties of Twin-Roll-Cast (TRC) AZ31 Strips Investigation on the Influence of Manufacturing Parameters on the Fatigue Strength of Components Experimental & Numerical Study of the Hot Upsetting of Weld Cladded Billets Finite Element Simulation as a Tool to Evaluate Gear Quality after Gear Rolling Die and Process Design for Hot Forging of a Gear Wheel – A Case Study Time-Efficient and Precise FEM/BEM Simulation of a Cold Forging Process Verified by Tool Load Determination Methodology to Straighten the End Parts of Long Workpieces Speed Roll Laws Influence in a Ring Rolling Process Potential of Duplex Plasma Deposition Processes for the Improvement of Wear Resistance of Hot Forging Dies Beta Forging of Ti-6Al-4V: Microstructure Evolution and Mechanical Properties Computer Aided Design of Manufacturing of Anchors and Formulation of the Optimization Task for in Use Properties Chapter 3: Composites Forming Processes Experimental Study of Steel and Glass Knitted Fabrics Thickness under Pre-Strain and Shear Two-Scales Kinetic Theory Model of Short-Fibers Aggregates Effect of Tow Meander on the Shear Compliance of Woven Engineering Fabrics Measured Using the Biaxial Bias Extension Test Simulation of Composite Forming at Meso Scale Identification of Fibre Degradation due to Friction during the Weaving Process Identification of Forming Limits for Unidirectional Carbon Textiles in Reality and Mesoscopic Simulation Forming of a Non-Crimp 3D Orthogonal Weave E-Glass Composite Reinforcement Analysis of the Blank Holder Force Effect on the Preforming Process Using a Simple Discrete Approach Monolithic Approach of Stokes-Darcy Coupling for LCM Process Modelling Experimental Setup to Validate Textile Material Models for Drape Simulation Validation of Macroscopic Forming Simulations of a Unidirectional Pre-Impregnated Material through Optical Measurements Numerical Modelling of the Weaving Process for Textile Composite Characterization of Cured Composite Materials for Wind Turbine Blades Finite Element Modeling of Unidirectional Non-Crimp Fabric for Manufacturing of Composites with Embedded Cabling Analysis of the Stress Components during the Forming of a Textile Composite Reinforcement Formability of Fiber-Reinforced Thermoplastics in Hot Press Forming Process Based on Friction Properties Experiment Study of Thermoforming of Plain Woven Composite (Carbon/Thermoplastics) Simple Tests as Critical Indicator of Intra-Ply Shear Locking Chapter 4: Semi-Solid Processes Yield Stress in Semi-Solid Alloys – The Dependency on Time and Deformation History Rheology of Blast Furnace Slags Admitted High Concentration of Titanium Oxides Application of X-Ray Microtomography to Quantify the Liquid Fraction of M2 Steel for Semi-Solid Forming Process Microstructure Analysis of High-Manganese TWIP Steels Produced via Strip Casting Advances in the Twin-Roll Strip Casting of Strip with Profiled Cross Section Thixoforging of Ultrasound Treated 6060 Aluminum Alloy Thermal Profiles and Fraction Solid of Aluminium 7075 at Different Cooling Rate Conditions Laser Surface Modification of AISI 1025 Low Carbon Steel Using Pulsed Nd:YAG Laser for Enhance Surface Properties Thermal Barrier Coatings on Laser Surface Modified AISI H13 Tool Steel Using Atmospheric Plasma Spray Technique Chapter 5: Light Weight Design and Energy Efficiency in Metal Forming Cold Piercing of Cylindrical Aluminum Billet with Counter Punch Pressure Energy-Efficient Solid Forward Extrusion through Hybridization Based on Process-Integrated Resistance Heating Basic Experimental and Numerical Investigations on Chip Pressing Coupled Thermo-Mechanical-Metallurgical Analysis of an Hot Forging Process of Titanium Alloy Hot Stretch Forming of a Titanium Alloy Component for Aeronautic: Mechanical and Modeling Development of Metal Hollow Sphere Sheet and its Formability and Mechanical Property Numerical Investigation of the Incremental Tube Forming Process Groove Filling Characteristics and Strength of Form-Fit Joints Produced by Die-Less Hydroforming Topology Optimization of a Car Seat Frame Chapter 6: New and Advanced Numerical Strategies for Material Forming Modeling Thixoforming Process Using the eXtended Finite Element Method and the Arbitrary Lagrangian Eulerian Formulation Towards Online Control of Forming Processes Involving Residual Stresses: Defining Multi-Parametric Computational vademecums Toward a Real Time Control of Toolpath in Milling Processes Direct 3D Simulation of Powder Sintering by Surface and Volume Diffusion 3D Modelling of Doped and Multi-Materials during Sintering of a Granular Packing Improvement on CAE Model Considering Surface Deformation of Tools in Contact with Blank Sheet for Accurate Torsional Springback Prediction in High Strength Steel Part Forming Electromagnetic Sheet Bulging: Analysis of Process Parameters by FE Simulations An Efficient Algorithm for Modeling the Thermo-Mechanical Material Response of Heavy Steel Plates during Accelerated Cooling Chapter 7: Extrusion and Drawing Coextrusion and Mechanical Characterization of Aluminum Coated Mg-Profiles Velocity Field in Direct, Indirect and Friction Assisted Extrusion of Al Modeling Approach for the Determination of Material Flow and Welding Conditions in Porthole Die Extrusion with Gas Pocket Formation Design Criteria in Numerical Design of Profile Extrusion Dies Composite Extrusion of Thin Aluminum Profiles with High Reinforcing Volume Chapter 8: Friction and Wear in Material Processing Surface Evolution and Lubricant Distribution in Deep Drawing Novel Experimental Set-Up to Investigate the Wear of Coatings for Sheet Metal Forming Tools Development of Upsetting-Extrusion Type Tribometer for Evaluating Lubrication Coating Performance in Cold Forging Study of Morphology Wear Model of Moulds from Alloys of Aluminium EN AW-6082 in Injection Process Numerical Simulations of Asperity Crushing Using Boundary Conditions Encountered in Cold-Rolling Sclero-Topometry in Superficial Wear and Metal Processing of Ductile Cast Iron at Boundary Lubrication. Application to Tribological Valorization of Waste Oil Chapter 9: Nano-Structured Materials and Microforming Incremental ECAP with Converging Billets Route Effects in I-ECAP of AZ31B Magnesium Alloy Enhancing Mechanical Properties and Formability of AISI 301LN Stainless Steel Sheet by Local Laser Heat Treatment Microstructuring by a Combination of Micro Impact Extrusion and Shear Displacement Forming Accuracy of Transferring Microparts in a Multi Stage Former Chapter 10: Inverse Analysis Optimization and Stochastic Approaches Sequential Optimization of Strip Bending Process Using Multiquadric Radial Basis Function Surrogate Models Surrogate POD Models for Parametrized Sheet Metal Forming Applications Damage Material Parameters Identification Using the ANN-GA Method and the Bulge Test On the Development and Computational Implementation of Complex Constitutive Models and Parameters’ Identification Procedures Development of an Inverse Routine to Predict Residual Stresses in the Material Based on a Bending Test A Two-Pronged Approach for the Assessment of Springback Variability for Sheet Metal Forming Applications Application of Tube Hydroforming in Square Cross-Section Die for Inverse Identification Method Validation Chapter 11: Innovative Joining by Forming Technologies Microstructure and Mechanical Properties of Friction Stir Welded AA6060-T6 Tubes Effect of Welding Parameters on AA8090 Al-Li Alloy FSW T-Joints Effect of Surface Pretreatment on the Performance of Adhesive-Bonded Joints Study of the Forces Generated during Nonlinear Friction Stir Welding: Circular Trajectory Cladding of Advanced Al Alloys Employing Friction Stir Welding A Numerical and Experimental Analysis of Microstructural Aspects in AA2024-T3 Friction Stir Welding Influence of Parameters in a Hybrid Joints (SPR/Bonded) GFRP-Aluminum Numerical Study of a Crimped Assembly Mechanical Strength Numerical and Experimental Analysis of Self Piercing Riveting Process with Carbon Fiber-Reinforced Plastic and Aluminium Sheets Similar and Dissimilar FSWed Joints in Lightweight Alloys: Heating Distribution Assessment and IR Thermography Monitoring for On-Line Quality Control FSW of AA 2139 Plates: Influence of the Temper State on the Mechanical Properties The Friction Stir Welding of Cylindrical Components Effect of Process Parameters on the Joint Integrity in Friction Stir Welding of Ti-6Al-4V Lap Joints Partial Joining of Blanks with Electrochemical Support (ECUF) Chapter 12: Multiscale & Continuum Constitutive Modelling Research into the Flow Stress of Al-Mg-Si Alloy (AD-35) during the Abrupt Change of the Strain Rate at Elevated Temperatures A Finite Element Based Approach for the Accurate Determination of the Shear Behaviour of Textiles with the Picture-Frame Shear Test Characterization and Modeling of the Elastic Behavior of a XC68 Grade Steel Used at High Strain Rates and High Temperatures Growth and Closure of Voids in Metals at Negative Stress Triaxialities Analysis of Metallic Materials Behavior during Severe Loadings Using a FE Modeling of the SHPB Test Based on a Numerical Calibration of Elastic Strains with Respect to the Raw Measurements and on the Inverse Analysis Principle On the Selection of Active Slip Systems in Rate Independent Crystal Plasticity Polycrystalline Model Predictions of Flow Stress and Textural Hardening during Monotonic Deformation Physically-Motivated Elasto-Visco-Plastic Model for the Large Strain-Rate Behavior of Steels On the Study of Distinct Algorithmic Strategies in the Implementation of Advanced Anisotropic Models with Mixed Hardening Asymmetric Yield Locus Evolution for HCP Materials: A Continuum Constitutive Modeling Approach Crystal Plasticity Modeling of the Through-Thickness Texture Heterogeneity in Heavily Rolled Aluminum How to Combine the Parameters of the Yield Criteria and the Hardening Law Comparison of Different Constitutive Models in Sheet Metal Forming Activation Energy for Hot Deformation of 15-5 PH Stainless Steel Hot Deformation Studies of a Low Carbon Steel Containing V Modelling of Polishing Tools for High Spatial Frequency Defect Correction on Aspherical Surfaces Chapter 13: Incremental and Sheet Metal Forming A Plasticity Induced Anisotropic Damage Model for Sheet Forming Processes Deformation Scenarios of Combined Stretching and Bending in Complex Shaped Deep Drawing Parts Application of Response Surface Analysis and Genetic Algorithm for the Optimization of Single Point Incremental Forming Process Forming of Automotive Aluminum Body Panels by Sheet Hydroforming Force Prediction for Correction of Robot Tool Path in Single Point Incremental Forming Finite Element and Experimental Investigation of the Multipoint Flexible Hydroforming Flow Characteristics of New Steel Grades Dedicated to Hot Stamping Influence of Tool Geometry Variation on the Punch Force in Micro Deep Drawing Evaluating Material Constitutive Equations for the Simulation of Incremental Sheet Forming Applied to Form Thermoplastic Materials Reduction of Springback in Hat Channel with High-Strength Steel Sheetby Stroke Returning Deep Drawing Investigation on Effect of Slide Motion Control on Stamping of High Strength Steel Sheets Material Property Evolution in Incremental Sheet Forming - A Review and Comparison The Influence of Toolpath Strategy on Geometric Accuracy in Incremental Forming Incremental Sheet Metal Forming with Direct Resistance Heating Using Two Moving Tools Friction-Spinning – an Innovative Incremental Forming Process for the Manufacturing of Functional Graded Parts Comparison between an Advanced Numerical Simulation of Sheet Incremental Forming Using Adaptive Remeshing and Experimental Results Control System Algorithm for the Prediction of Sprinback in Air Bending Single Point Incremental Forming of a Medical Implant An Investigation of Factors that Influence the Overall Magnitude of Cross-Sectional Distortions in Draw Bending Experimental and Numerical Studies of Edge Rounding Process in HSLA Steels Sheet Metal Tool Path Generation for Single Point Incremental Forming Using Intelligent Sequencing and Multi-Step Mesh Morphing Techniques Brass 70/30 and Incremental Sheet Forming Process A Study on the Nose Radius Influence in Press Brake Bending Operations by Finite Element Analysis On the Geometric Accuracy in Shallow Sloped Parts in Single Point Incremental Forming Determination of Tool Motions in Stretch Forming Process for Aerospace Applications by Using Finite Element Method Chapter 14: Sheet-Bulk-Metal Forming Manufacturing of Geared Sheet Metal Components Using Flexible Rolled Tailored Blanks Development of a Friction Law Respecting Plastic Surface Smoothing Novel Five-Axis Forming Press for the Incremental Sheet-Bulk Metal Forming Influence of Superimposing of Oscillation on Sheet-Bulk Metal Forming Innovative Tools to Improve Incremental Bulk Forming Processes Chapter 15: Heat Transfer Modelling Experimental Determination of Heat Transfer Coefficients for Forming of Stainless Steel Sheets Considering Process Conditions and Deep-Drawing Film Estimation of the Heat Transfer Conditions in a die Radius during Hot Stamping Simulations of an Infrared Composite Curing Process Simulation of IR Heating for Composite Stamping Influence of the Impact Angle and the Gravity Direction on Heat Transfer during the Cooling of a Cylinder by a Free Planar Subcooled Impinging Jet Induction Heat Treatment for an Automotive Crankshaft: Large Scale Modelling with Moving Inductors Temperature and Displacement Fields Measurements to Assist the Numerical Simulation of the Welding-Brazing Process of Thin Automotive Parts Characterization of Roll Bite Heat Transfers in Hot Steel Strip Rolling and their Influence on Roll Thermal Fatigue Degradation Chapter 16: Structures, Properties and Processing of Polymers Prediction of Tensile Properties of Injection Moulding Flax Fibre Reinforced Polypropylene from Morphology Analysis Digital Image Correlation for On-Line Wall Thickness Measurements in Thick Gauge Thermoforming An Original Model Experiment Designed for High-Pressure Crystallization with a Polymer Processing Concern Numerical Simulation of Plug-Assisted Thermoforming Process: Application to Polystyrene Uniform Cooling and Part Warpage Reduction in Injection Molding Thanks to the Design of an Effective Cooling System A New PvT Device for the Thermoplastics Characterization in Extreme Thermal Conditions Structure Development of Biodegradable Polymers: Crystallization of PLA Thermo-Kinetic Analysis of Liquid Silicone Rubber Multi Criteria Adaptive Meshing for Polymers Processing in Rem3D® Evaluation Method for Stretch Blow Moulding Simulations with Process-Oriented Experiments Multi-Response Parameters Optimisation for Energy-Efficient Injection Moulding Process via Dynamic Shainin DOE Method In-Line Visualisation of Polymer Plastication in an Injection Moulding Screw Numerical Analysis of Non-Isothermal Viscoelastic Materials for Thermoforming of Polymer Films Thermal Simulation of Polymer Crystallization during Post-Filling Morphology-Crystallinity Relationship in PLA-PHBV Blends Prepared via Extrusion Transversely Isotropic Hyperelastic Constitutive Models for Plastic Thermoforming Simulation Analysis and Simulation of the Free-Stretch-Blow Process of PET Role of the Interphase in the Interfacial Flow Stability in Coextrusion of Compatible Multilayered Polymers Compounding and Melt Strengthening of Poly(Lactic Acid): Shear and Elongation Rheological Investigations for Forming Process Structure-Properties Relationships in Processed Poly(ethylene terephthalate) Physical Modelling and Identification of Polymer Viscoelastic Behaviour above Glass Transition Temperature and Application to the Numerical Simulation of the Hot Embossing Process Chapter 17: Non-Conventional Processes Numerical and Experimental Study of Tube Hydroforming for Aerospace Applications An Experimental Study on the Friction Stir Processing Process of Aluminium Alloy Primary Research on Jet ECM Processing of Difficult to Cut Materials Machining of External Cylindrical Surfaces on a RAM Electrical Discharge Machine Material Efficient Manufacturing of Three-Dimensional Components Using Metal Knitting Rapid Manufacturing of Shaped Die and Draw Punch Tools for Presses Influence of Process Parameters on Surface Hardening in Hammer Peening and Deep Rolling Investigation of Residual Stresses Induced during the Selective Laser Melting Process Ti-6Al-4V Cutting by 100W Fibre Laser in Both CW and Modulated Regime Experimental Investigation on Dry Electrical Discharge Drilling Spring Back of Curved Flanges of Rubber Formed Aluminum Parts Influence of Steaming and Boiling at 180 °C Plus on the Injectability of Bamboo Powder Numerical Simulation of Laser Bending of Aluminum Foams Novel Aerospace Architectures Made Possible by Forming Simulation Press-Shaving Characteristics of Ultrahigh-Strength Steel Sheets Effect of Process Parameters on Surface Roughness in Hammer Peening and Deep Rolling A Roll Caster to Cast Clad Strip Modelling and State Estimation in Pulsed ECM with Variable Electrolyte Conductivity Electrical Discharge Machining of Alumina-Zirconia-TiC Composites with Varying Zirconia Content DPSS Nd:YAG Laser Precission Machining of Monocrystalline Sapphire Forming of Shape Memory Composite Structures Chapter 18: Machining and Cutting Experimental Evaluation of Innovative Tools for Ti-6Al-4V Turning Experimental Investigation on the Cutting Heat Distribution with Different Coating Structures Inserts Experimental Study of tool Wear Mechanisms in Conventional and High Pressure Coolant Assisted Machining of Titanium Alloy Ti17 Cutting Edge and its Influence on the Fatigue Life of High Strength CrMn-Austenitic Stainless Steel Effect of the Process Parameters on the Machinability Characteristics of a CoCrMo Alloy Numerical Simulation of Machining Operations on Flexible Parts A Study of the BTA Deep Drilling Process through a Quantitative and Qualitative Analysis of the Chip Formation Process Investigation of the Impact of Orthogonal Cutting Processes on Nanocrystalline Surface Layer Generation Implementation of Advanced Frictional Laws for Modelling of High Speed Machining Analysis of Machining Operations of a Femoral Prosthesis Using CAM Applications An Experimental Study of Drilling Parameters Effect on Composite Carbon/Epoxy Damage Thermo Mechanical Loads in Ti-6Al-4V Machining 3D Simulation of Laser Assisted Side Milling of Ti6Al4V Alloy Using Modified Johnson-Cook Material Model Potential of Modern Lubricoolant Strategies on Cutting Performance An Error Model in Micro Dimple Milling Air Jet Assisted Machining of Inconel 718 with Whisker Reinforced Ceramic Tool Metallurgical Aspects of Material Behaviour in Cutting of AISI 1045 The Effects of Cutting Conditions on Surface Integrity in Machining Inconel 718 Alloy Chapter 19: Integrated Design, Modelling and Reliability Assessment in Forming (I-DMR) Inverse Identification of CDM Model Parameters for DP1000 Steel Sheets Using a Hybrid Experimental-Numerical Methodology Spanning Various Stress Triaxiality Ratios Calibration of Material Parameters of Anisotropic Yield Criterion with Conventional Tests and Biaxial Test A FEM-DBEM Investigation of the Influence of Process Parameters on Crack Growth in Aluminum Friction Stir Welded Butt Joints The Internal Stress Evaluation of Pultruded Blades for a Darrieus Wind Turbine A Generic Methodology to Improve the Control of Forging Process Parameters Open Die Forging of Large Shafts with Defects – Physical and Numerical Modelling Shape Optimization of the Conventional Simple Shear Specimen Utilizing Multiple Objectives for the Optimization of the Pultrusion Process Based on a Thermo-Chemical Simulation Integrated Design of Wing Panel Manufacture Processes Integrity Evaluation of Steel Flanges Joined with Metallic Gaskets Development of an Optimized Loading Path for Material Parameters Identification Numerical Optimization of Selective Superplastic Forming of Friction Stir Processed AZ31 Mg Alloy CAD/CAM Strategies for a Parallel Kinematics SPIF Machine Effect of Moisture on the Behaviour of an Extruded Clay Paste Integrated Design and Numerical Simulation of Stiffened Panels Including Friction Stir Welding Effects Development of Adapted Material Testing for Cold Pilgering Process of ODS Tubes Study of Formability of Sandwich Shells with Metal Foam Cores Sensitivity Analysis of Process Parameters in the Drawing and Ironing Processes Earing Prediction in Drawing and Ironing Processes Using an Advanced Yield Criterion Applying Nagata Patches in the Description of Smooth Tool Surfaces Used in Sheet Metal Forming Simulations Analysis of Incremental Sheet Forming Parameters and Tools Aimed at Rapid Prototyping Experimental Study on the Overall Spifability of AISI 304 Sheets under Different Bending Conditions The Influence of Cold Forming Conception on the Springback Magnitude Improving Surface Based Clamping Simulations by Measuring the Position of Active Surfaces during the Clamping Process Chapter 20: Finite Element Technology and Multi-Scale Methods for Composites, Metallic Sheets and Coating Models Comparison of Hyper- and Hypoelastic-Based Formulations of Elastoplasticity with Applications to Metal Forming Prediction of Springback in Unconstrained Bending by a Model for Evolving Elastic and Plastic Anisotropy Material Modeling and Numerical Analysis of the Heat Treatment in High Carbon Steels-Application to Ring Rolling A Micro-Scale Model for Fiber Tow Characterization under Nondeterministic Assumption: Longitudinal and Transverse Permeability Towards Fracture Prediction in Single Point Incremental Forming Simulation of Electromagnetic Forming of a Cross-Shaped Cup by Means of a Viscoplasticity Model Coupled with Damage at Finite Strains Micromechanical Modeling of Damage and Failure in Dual Phase Steels Influence of the Number of Tensile/Compression Cycles on the Fitting of a Mixed Hardening Material Model: Roll Levelling Process Case Study Multi-Scale Modeling of Microstructure Evolution Induced Anisotropy in Metals Test Procedures and Simulation Model Calibration Strategies for Nonlinear Stiffness Behavior of Joints in Large-Scale Structures Numerical Implementation and Finite Element Analysis of Anisotropic Hyperelastic Biomaterials - Influence of Fibers Orientation Numerical Modeling and Digital Image Correlation Strain Measurements of Coated Metal Sheets Submitted to Large Bending Deformation Modelling of Damage in Blanking Processes Influence of Anisotropic Yield Functions on Parameters of Yoshida-Uemori Model Validation of the Computer Simulation Process Applied to the Incremental Forming Process for the Evaluation of Strain Paths Chapter 21: Intelligent Computation in Forming Processes Optimization of the Heat Treatment Layout and Blank Outline of THTB An Efficient Knowledge Based System for the Prediction of the Technical Feasibility of Sheet Metal Forming Processes Development of a Damage Prediction System for Bending and Cutting of High Strength Steels Metamodeling Based on the Fusion of FEM Simulations Results and Experimental Data Dramatic Speed-Up in FEM Simulations of Various Incremental Forming Processes Thanks to Multi-Mesh Implementation in Forge® Deformations in Idealized 2D Extrusion Welding


Best Sellers


Product Details
  • ISBN-13: 9783038261001
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volumes 554-557 Key Engineering Materials
  • ISBN-10: 3038261009
  • Publisher Date: 13 Jun 2013
  • Binding: Digital download and online
  • No of Pages: 2600


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
The Current State-of-the-Art on Material Forming: (Volumes 554-557 Key Engineering Materials)
Trans Tech Publications Ltd -
The Current State-of-the-Art on Material Forming: (Volumes 554-557 Key Engineering Materials)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

The Current State-of-the-Art on Material Forming: (Volumes 554-557 Key Engineering Materials)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!