Biomaterials and Applications
Home > Medicine & Health Science textbooks > Medicine: general issues > Biomaterials and Applications: (Volume 506 Advanced Materials Research)
Biomaterials and Applications: (Volume 506 Advanced Materials Research)

Biomaterials and Applications: (Volume 506 Advanced Materials Research)


     0     
5
4
3
2
1



Out of Stock


Notify me when this book is in stock
X
About the Book

Volume is indexed by Thomson Reuters CPCI-S (WoS). These proceedings bring together the invited and contributed articles presented at Chiang Mai International Conference on Biomaterials & Applications (CMICBA 2011). The main emphasis of the conference was placed on (a) biomaterials science and related disciplines, including mathematics, physics, biology and chemistry, in conjunction with (b) applications of biomaterials in areas such as life sciences, cosmetics, agriculture and the environment.

Table of Contents:
Preface, Advisory Board and Local Oganizing Committee I. Plenary and Invited Proteoglycan Analogues for Ophthalmic and Orthopaedic Applications SurgiLux: A Novel Thin Film, Laser-Activated Bioadhesive for Corneal Repair Polymers, Biomanufacturing and Regenerative Medicine Biomedical Polymers Materials for a New Era in Molecular Engineering Spinal Cord Repair and Regeneration: The Application of Bioadhesives and Extracellular Matrix Bioscaffolds Bioactive Nano-Filters to Control Legionella on Indoor Air Polyelectrolyte-Enhanced Ultrafiltration (PEUF) Process for Low Level Arsenic Removal: Recovery of Polyelectrolyte from Retentate Stream Antibacterial Wound Healing Gels from Oligochitosan Salts Effect of Physical Aging on Physical Properties of Pregelatinized Tapioca Starch Novel Flexible NH3 Gas Sensor Prepared by Ink-Jet Printing Technique II. Biomaterials Science Molecular Network and Crosstalk Effects for Network Reliability Blood Circulation Manipulation within Molecular Buffer and Bus Network for Molecular Diagnosis Use Molecular Design of a Speciality Polyester for Potential Use as a Fast-Absorbable Monofilament Surgical Suture The Fabricated Collagen-Based Nano-Hydroxyapatite/β-Tricalcium Phosphate Scaffolds Effect of Apatite Precipitation on Failure Behavior of Hydroxyapatite Coating Layer on Titanium Substrate Fatigue Behavior and Apatite Precipitation of Plasma-Sprayed HAp Coating on Commercially Pure Titanium Substrate in Simulated Body Fluid (SBF) Biomass-Based Sulfonic-Functionalized Carbon Solid Acid for Esterification of Acetic Acid Preparation and Characterization of Modified Biphasic Calcium Phosphate Ceramics Hydrothermal Synthesis of Zinc Oxide Nanoparticle from Zinc-Dust Waste for Photocatalytic and Antibacterial Applications Influence of the Substrate Bias Voltage on the Structure of Rutile TiO2 Films Prepared by Dual Cathode DC Unbalanced Magnetron Sputtering Synthesis of Nanocrystalline β-Tricalcium Phosphate from Chicken Eggshells by Precipitation Method Characterization of Apatite from Human Teeth via XRD, FT-IR and TGA Techniques Sonochemical Synthesis of Zn3(PO4)2.4H2O and Zn3(PO4)2 Powders Statistical Optimization of Esterification Reaction to Produce Biodiesel from the Mixture of PFAD and Palm Stearin Oil Using Two-Step Reaction Blood Circulation Network Incorporation an Artificial Bone for Real Time Operation Effect of Apatite Wollastonite Glass Ceramic Addition on Brushite Bone Cement Containing Chitosan Synthesis, Processing and Testing of a Poly (DL-Lactide-co-ε-Caprolactone) Resorbable Electrospun Membrane for Guided Tissue Regeneration Attachment and Proliferation of Cultured Human Periodontal Ligament Cells on 75:25 Poly (DL-Lactide-co-ε-Caprolactone) Electrospun Resorbable Membrane Preparation of Chitosan-Thiamine Pyrophosphate/Polyvinyl Alcohol Blend Electrospun Nanofibers Stability and Cytotoxicity of Well-Dispersed Magnetite Nanoparticles Prepared by Hydrothermal Method Properties of Poly(lactic acid) (PLA)/Poly(butylene adipate-co-terephthalate) (PBAT) Blends in the Presence of Antioxidant Preparation and Characterization of Biopolymer Film from Pomelo Pectin and Flour Association Behavior of the Synthetic Protein-Lipid Complex Analogues Spontaneous Calcium Deposition in the Scaffolds from Human Dermal Solutions Comparison of Metal Alkoxide Initiators in the Ring-Opening Polymerization of Caprolactone Apatite-Wollastonite Bioactive Glass-Ceramic Scaffolds for Hard Tissue Engineering Magnesium Substitution in Hydroxyapatite Synthesized by Sol-Gel Method Lipase-Catalysed Polymerization of Lactic Acid and the Properties of the Polymer 1H-NMR Analysis of Degree of Substitution in N,O-Carboxymethyl Chitosans from Various Chitosan Sources and Types Development of NLCs for Topical ATRAs Applications Effect of BaZr0.05Ti0.95O3 Addition on Microstructure and Piezoelectric Properties of Hydroxyapatite Bone Phase Formation of Hydroxyapatite Particles at Different Calcination Temperatures Characteristics of 45S5 Bioglass-Ceramics Using Natural Raw Materials Synthesis and Characterisation of PLA-CO-PEG Copolymers Simplified Qualitative Analysis of Glycerides Derived from Coconut Oil Using Thin Layer Chromatography Formation and Characterization of Shellac Phthalate Succinate through Organic Solvent-Free Reaction Property Development of Hydroxyapatite Ceramics by Two-Step Sintering Tyrosinase Inhibitory Activity of Pyrazole Derivatives The Preparation and Morphology of Biphasic Calcium Phosphate Ceramics Determination the Effect of Silver Nanoparticles on Gram-Positive Bacterial Cells by Atomic Force Microscopy Synthesis and Characterization of Pure Natural Hydroxyapatite from Fish Bones Bio-Waste Structural Analysis of Strontium-Substituted Hydroxyapatites Production and Characterization of Activated Carbon from Waste Tire by H3PO4 Treatment for Ethylene Adsorbent Used in Active Packaging Synthesized Silica Powder from Rice Husk for Printing Raw Materials Application Resonance Raman Enhancement of the ν4 Band in Fe (TMPP)Cl at NIR Laser Excitation Attributed to Supramolecular Interaction Preparation of Polycaprolactone/Ethanolic Extract Propolis Nanofibers Films Preparation of Glutinous Rice Starch Nanofibers by Electrospinning Effect of Metal Oxide Nanoparticles Addition on Physical Properties of Hydroxyapatite Properties of Porous Alumina Fabricated by Ceramic Injection Moulding Using Environmentally Friendly Binder Factors Influencing the Morphology of Cellulose Acetate Electrospun Fiber Mats Combination Effects of the Antimicrobial Agents and Cinnamon Oil A New Approach for the Preparation of Bleached Shellac for Pharmaceutical Application: Solid Method Preparation of Nanosilver Loaded Calcium Phosphate by In Situ Phase Conversion Process Molecular Dynamics Study of DNA Duplex Containing Carbazole-Derived Universal Base Effect of Crystalline Morphology on Mechanical Properties of PPB Polymer Nanofiber Composite Effect of Galactomannan on the Dynamic Properties of Xyloglucan Aqueous Solution Determination of Surface Free Energy and Contact Angle for Hydrolyzed Shellac Comparison of In Vitro Binding of Bile Salt by Pectins from Various Sources Thermal Analysis of Chitosan-Lactate and Chitosan-Aluminum Monostearate Composite System Drug-Loaded Pectin Microparticles Prepared by Emulsion-Solvent Evaporation Pectin-Based Nano-Sized Emulsions Prepared by High-Pressure Homogenization Design of Shellac-Based Film with Improved Mechanical Properties through Composite Formation with Clay Effect of Ultrasonic Treatment on Physical Properties of Tapioca Starch Heterocoaggulation of Natural Rubber Latex and Poly [Styrene-co-2-(Methacryloyloxy) Ethyl Trimethylammonium Chroride] Nanoparticles Preparation of Poly(l-lactic acid) Capsule Encapsulating Fertilizer Physical Stabilizing Effect of Biopolymers on Solid Dispersions Containing Indomethacin and Polyethylene Glycol Development of Biodegradable Films Based on Durian Seed Starch Design and Preparation of Synthetic Hydrogels by Redox Initiation via Free Radical Polymerisation for Biomedical Use as Wound Dressings Effect of Zein Concentration on the Formation of Pectin-Zein Complexes Compostability and Ecotoxicity of Poly(lactic acid) and Starch Blends The Ultimate Biodegradation of the Starch Based Biodegradable Plastics Study of the Disintegration of Poly (butylene adipate-co-terephthalate) and Starch Co-Extruded Materials In Situ Crosslinkable Thiolated Chitosan as Scaffold Material for Tissue Engineering Development of Soaps Containing Betel Nut Extract Surface Tension and Viscosity of Herbal Massage Oil Non-Aqueous Virgin Coconut Oil Hair Gel Instant Powder of Malabar Tamarind Fruit Extract Prepared by Foam-Mat Method Menthol, Borneol, Camphor and WS-3 Eutectic Mixture A Novel Silk Sericin/Poly (Vinyl Alcohol) Composite Film Crosslinked with Genipin: Fabrication and Characterization for Tissue Engineering Applications Structural and Textural of Marine Mollusc Shell Release of Growth Factor from Platelet-Rich Fibrin and its Stability in Sinus Lifting in Minipigs Ultrasonic Extraction of Thai Propolis for Antimicrobial and Antioxidant Properties Formulation Development of Gel-Based Lipstick Containing Longan Honey and Natural Color Extracted from Sappan Wood and Roselle III. Applications of Biomaterial Assessment of Physical, Mechanical and Biological Properties of Thai Silk Fibroin Vascular Scaffold The Gelation Study of Silk Fibroin for Biomedical Application Preparation of Zingiber officinale Extract Loaded Solid Lipid Nanoparticles Chemical Composition of Essential Oil and Antioxidant Activities of Curcuma petiolata Roxb. Rhizomes Natural Polysaccharide-Based Films and their Antibacterial Activities Characterization of Konjac Glucomannan Film Containing the Extracts of Atractylodes lancea and Saussurea lappa Gold Recovery from Aqueous Solutions Using Bioadsorbent Synthesized from Rambutan Peel Film Formation of Inclusion Complexes between Acetyl-Beta-Cyclodextrin and Chitosan Arsenic Removal by Precipitation with Calcium Phosphate Hydroxyapatite Characterization of Chitosan and Carboxymethyl Chitosan Films from Various Sources and Molecular Sizes Factors Affecting Design of Shellac-Based Matrix Tablet through Annealing Process Characterization and Adsorption Efficiency of the Natural and the Modified Diatomite via the Low Temperature Hydrothermal Route Effect of Coconut Oil and Surfactants on Stability of Nanoemulsions The Influence of Cyclodextrin and pH on the Solubility of Ketoprofen Effect of Crosslinking Time on Ion Exchange Capacity of Polystyrene Nanofiber Ion Exchangers Development of Ketoprofen Microemulsion for Transdermal Drug Delivery Effect of Acyl Chain Length of Spermine Derivatives on Transfection Efficiency Effect of Limonene and 1,8 Cineole on the Skin Penetration of Fluorescein Sodium Deformable Liposomes Thermal Insulation Produced from Pineapple Leaf Fiber and Natural Rubber Latex Effect of Surfactants on Characteristic and In Vitro Release of Meloxicam Loaded in Deformable Liposomes Cream Stick Containing Natural Oil for Cracked Heel Application of Methylated N-(4-N,N-Dimethylaminocinnamyl) Chitosan for Oral Protein Drug Delivery Chitosan Coated Alginate Microparticles for Oral Vaccine Delivery Rapidly Dried Antimicrobial Spray for Foot Deodorant Customized Three Dimensional Printed Porous Polyethylene for Calvarial Reconstruction Comparison of Vehicles for Vancomycin Drug Delivery in Extemporaneously Prepared Ophthalmic Solutions Mechanisms of Cellular Uptake with Chitosan/DNA Complex in Hepatoma Cell Line Comparison between Ethylcellulose Aqueous Colloidal Dispersion and Ethylcellulose Ethanolic Solution as Rupturable Coating Materials for Pulsatile Release Tablets Fabrication of Dental Ceramics from Silicon Nitride Core with Borosilicate Glass Veneer Magnesium Stearate as Anti-Tacking Agent in Acrylic Polymer Films Intended for Gas-Entrapped Floating Delivery System Oral Bases Containing Centella asiatica Extract: Formulations and Evaluations Gelatin/Fibroin Hydrogel for Controlled Release of Human Dentin Matrix Extract Fabrication of P2O5-CaO-Na2O Glasses Doped with Zinc Oxide for Artificial Bone Applications Antimicrobial Performance and Cytotoxicity of Antibiotics Impregnated Hydroxyapatite for Osteomyelitis Treatment Floating Alginate Beads as Carriers for Self-Emulsifying System Containing Tetrahydrocurcumin Study of Mechanical Properties of Magnesium Oxide Doped Alumina (Al2O3) and Yttria Stabilized Zirconia (YSZ) Composite for Medical Applications Investigation of Antibacterial Properties of Soda Calcium Borosilicate Glass Doped with TiO2 Influence of Diluents on Physical Properties of Soybean Extracted Powder Prepared by Spray Drying Method Development of Acrylic Matrix Type Ketoprofen Patch Antimicrobial Effect of Brazillian Propolis/Polycaprolactone Polymer on some Human Pathogenic Bacteria Nanofiber Production Using Polyvinylalcohol (PVA) and Thai Honey and its Properties Antimicrobial Activity of Newly Formulated Propolis Cream Surface Degradation and Mechanical Properties of PVC/Wood-Pallet Composite under UV-Weathering Environment Preparation of Polydiacetylene Vesicle and Amphiphilic Polymer as Time-Temperature Indicator Effect of Phthalic Anhydride Loading on Alkyd Resins for Paperboard Coating The Effect of Binder Phase on the Mechanical Properties of Particle Boards Based on Giant Sensitive Plant Effect of Lead Oxide on Glass Properties Produced from Rice Husk Fly Ash Preparation and Properties of Glass Produced from Palm Ash Properties of Thermal Insulation from Durian Peel Fiber and Natural Rubber Latex Cheap Media for Inoculum Preparation of Acetic Acid Bacteria The Efficiency Development of Ammonia-Odor Sensor Based on PSE-Polymer/SWNT Nanocomposite Sunscreen Liquid Foundation Containing Naringi crenulata Powder Stability of Anthocyanin from Mulberry Extracts in Alginate Microspheres at High Temperature Use of Response Surface Methodology for Phenolic Antioxidant Extraction from Lotus (Nelumbo nucifera Gaertn.) Pod Pericarp Prediction Models for Moisture Sorption Isotherms of Soy Protein Isolate/Carboxymethyl Chitosan/Oleic Acid Blend Films Inhibitory Effect of Chitosan Films Incorporated with 1,8-Cineole on Salmonella Attached on Model Food Surface Characterization of Eugenol Extracted from Lemongrass (Cymbopogon citratus (DC.) Stapf) for Food Packaging Materials Efficacy of Activated Carbon In Situ to Oil Palm Frond Paper for Active Packaging on Mechanical Properties Effect of Molecular Sizes, Sources of Chitosan and Plasticizer Types on Properties of Carboxymethyl Chitosan Films Surface Treatment on Low Density Polyethylene with TiO2 Nano-Particles for Packaging Printing Characterization Nanocrystalline of Hydroxyapatite Synthesized by a Co-Precipitation Method


Best Sellers


Product Details
  • ISBN-13: 9783038138211
  • Publisher: Trans Tech Publications Ltd
  • Publisher Imprint: Trans Tech Publications Ltd
  • Language: English
  • Series Title: Volume 506 Advanced Materials Research
  • ISBN-10: 3038138215
  • Publisher Date: 25 Apr 2012
  • Binding: Digital download and online
  • No of Pages: 646


Similar Products

Add Photo
Add Photo

Customer Reviews

REVIEWS      0     
Click Here To Be The First to Review this Product
Biomaterials and Applications: (Volume 506 Advanced Materials Research)
Trans Tech Publications Ltd -
Biomaterials and Applications: (Volume 506 Advanced Materials Research)
Writing guidlines
We want to publish your review, so please:
  • keep your review on the product. Review's that defame author's character will be rejected.
  • Keep your review focused on the product.
  • Avoid writing about customer service. contact us instead if you have issue requiring immediate attention.
  • Refrain from mentioning competitors or the specific price you paid for the product.
  • Do not include any personally identifiable information, such as full names.

Biomaterials and Applications: (Volume 506 Advanced Materials Research)

Required fields are marked with *

Review Title*
Review
    Add Photo Add up to 6 photos
    Would you recommend this product to a friend?
    Tag this Book Read more
    Does your review contain spoilers?
    What type of reader best describes you?
    I agree to the terms & conditions
    You may receive emails regarding this submission. Any emails will include the ability to opt-out of future communications.

    CUSTOMER RATINGS AND REVIEWS AND QUESTIONS AND ANSWERS TERMS OF USE

    These Terms of Use govern your conduct associated with the Customer Ratings and Reviews and/or Questions and Answers service offered by Bookswagon (the "CRR Service").


    By submitting any content to Bookswagon, you guarantee that:
    • You are the sole author and owner of the intellectual property rights in the content;
    • All "moral rights" that you may have in such content have been voluntarily waived by you;
    • All content that you post is accurate;
    • You are at least 13 years old;
    • Use of the content you supply does not violate these Terms of Use and will not cause injury to any person or entity.
    You further agree that you may not submit any content:
    • That is known by you to be false, inaccurate or misleading;
    • That infringes any third party's copyright, patent, trademark, trade secret or other proprietary rights or rights of publicity or privacy;
    • That violates any law, statute, ordinance or regulation (including, but not limited to, those governing, consumer protection, unfair competition, anti-discrimination or false advertising);
    • That is, or may reasonably be considered to be, defamatory, libelous, hateful, racially or religiously biased or offensive, unlawfully threatening or unlawfully harassing to any individual, partnership or corporation;
    • For which you were compensated or granted any consideration by any unapproved third party;
    • That includes any information that references other websites, addresses, email addresses, contact information or phone numbers;
    • That contains any computer viruses, worms or other potentially damaging computer programs or files.
    You agree to indemnify and hold Bookswagon (and its officers, directors, agents, subsidiaries, joint ventures, employees and third-party service providers, including but not limited to Bazaarvoice, Inc.), harmless from all claims, demands, and damages (actual and consequential) of every kind and nature, known and unknown including reasonable attorneys' fees, arising out of a breach of your representations and warranties set forth above, or your violation of any law or the rights of a third party.


    For any content that you submit, you grant Bookswagon a perpetual, irrevocable, royalty-free, transferable right and license to use, copy, modify, delete in its entirety, adapt, publish, translate, create derivative works from and/or sell, transfer, and/or distribute such content and/or incorporate such content into any form, medium or technology throughout the world without compensation to you. Additionally,  Bookswagon may transfer or share any personal information that you submit with its third-party service providers, including but not limited to Bazaarvoice, Inc. in accordance with  Privacy Policy


    All content that you submit may be used at Bookswagon's sole discretion. Bookswagon reserves the right to change, condense, withhold publication, remove or delete any content on Bookswagon's website that Bookswagon deems, in its sole discretion, to violate the content guidelines or any other provision of these Terms of Use.  Bookswagon does not guarantee that you will have any recourse through Bookswagon to edit or delete any content you have submitted. Ratings and written comments are generally posted within two to four business days. However, Bookswagon reserves the right to remove or to refuse to post any submission to the extent authorized by law. You acknowledge that you, not Bookswagon, are responsible for the contents of your submission. None of the content that you submit shall be subject to any obligation of confidence on the part of Bookswagon, its agents, subsidiaries, affiliates, partners or third party service providers (including but not limited to Bazaarvoice, Inc.)and their respective directors, officers and employees.

    Accept

    New Arrivals


    Inspired by your browsing history


    Your review has been submitted!

    You've already reviewed this product!